- 25 May, 2018 40 commits
-
-
Quinn Tran authored
[ Upstream commit 2ce87cc5 ] This patch fixes memory corrpution while performing HBA Reset test. Following stack trace is seen: [ 466.397219] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 466.433669] IP: [<ffffffffc06f5dd0>] qlt_free_session_done+0x260/0x5f0 [qla2xxx] [ 466.467731] PGD 0 [ 466.476718] Oops: 0000 [#1] SMP Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Henzl authored
[ Upstream commit 4a8842de ] cpu_msix_table is allocated to store online cpus, but pci_irq_get_affinity may return cpu_possible_mask which is then used to access cpu_msix_table. That causes bad user experience. Fix limits access to only online cpus, I've also added an additional test to protect from an unlikely change in cpu_online_mask. [mkp: checkpatch] Fixes: 1d55abc0 ("scsi: mpt3sas: switch to pci_alloc_irq_vectors") Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Acked-by:
Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit b7007dbc ] When exiting a transformation, the cra_exit() helper is called in each driver providing one. The Inside Secure SafeXcel driver has one, which is responsible of freeing some areas and of sending one invalidation request to the crypto engine, to invalidate the context that was used during the transformation. We could see in some setups (when lots of transformations were being used with a short lifetime, and hence lots of cra_exit() calls) NULL pointer dereferences and other weird issues. All these issues were coming from accessing the tfm context. The issue is the invalidation request completion is checked using a wait_for_completion_interruptible() call in both the cipher and hash cra_exit() helpers. In some cases this was interrupted while the invalidation request wasn't processed yet. And then cra_exit() returned, and its caller was freeing the tfm instance. Only then the request was being handled by the SafeXcel driver, which lead to the said issues. This patch fixes this by using wait_for_completion() calls in these specific cases. Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Peter Robinson authored
[ Upstream commit 7c73cf4c ] The MODULE_ALIAS is required to enable the sun4i-ss driver to load automatically when built at a module. Tested on a Cubietruck. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit c1a8fa6e ] This patch fixes the extra cache computation when the queued data is a multiple of a block size. This fixes the hash support in some cases. Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block") Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 666a9c70 ] This patch fixes the cache length computation as cache_len could end up being a negative value. The check between the queued size and the block size is updated to reflect the caching mechanism which can cache up to a full block size (included!). Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block") Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 95831cea ] This patch adds a check in the SafeXcel dequeue function, to avoid processing request further if no hardware command was issued. This can happen in certain cases where the ->send() function caches all the data that would have been send. Fixes: 809778e0 ("crypto: inside-secure - fix hash when length is a multiple of a block") Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 79eb382b ] I don't why we need take a single write lock and disable interrupts while setting up debugfs. This is what what happens when we try anyway: |ccp 0000:03:00.2: enabling device (0000 -> 0002) |BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:69 |in_atomic(): 1, irqs_disabled(): 1, pid: 3, name: kworker/0:0 |irq event stamp: 17150 |hardirqs last enabled at (17149): [<0000000097a18c49>] restore_regs_and_return_to_kernel+0x0/0x23 |hardirqs last disabled at (17150): [<000000000773b3a9>] _raw_write_lock_irqsave+0x1b/0x50 |softirqs last enabled at (17148): [<0000000064d56155>] __do_softirq+0x3b8/0x4c1 |softirqs last disabled at (17125): [<0000000092633c18>] irq_exit+0xb1/0xc0 |CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0-rc2+ #30 |Workqueue: events work_for_cpu_fn |Call Trace: | dump_stack+0x7d/0xb6 | ___might_sleep+0x1eb/0x250 | down_write+0x17/0x60 | start_creating+0x4c/0xe0 | debugfs_create_dir+0x9/0x100 | ccp5_debugfs_setup+0x191/0x1b0 | ccp5_init+0x8a7/0x8c0 | ccp_dev_init+0xb8/0xe0 | sp_init+0x6c/0x90 | sp_pci_probe+0x26e/0x590 | local_pci_probe+0x3f/0x90 | work_for_cpu_fn+0x11/0x20 | process_one_work+0x1ff/0x650 | worker_thread+0x1d4/0x3a0 | kthread+0xfe/0x130 | ret_from_fork+0x27/0x50 If any locking is required, a simple mutex will do it. Cc: Gary R Hook <gary.hook@amd.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 5d804a51 ] The Atmel AES driver uses memzero_explicit on the keys on error, but the variable zeroed isn't the right one because of a typo. Fix this by using the right variable. Fixes: 89a82ef8 ("crypto: atmel-authenc - add support to authenc(hmac(shaX), Y(aes)) modes") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Antoine Tenart authored
[ Upstream commit 4dc5475a ] This patch updates the safexcel_hmac_init_pad() function to also wait for completion when the digest return code is -EBUSY, as it would mean the request is in the backlog to be processed later. Fixes: 1b44c5a6 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Suggested-by:
Ofer Heifetz <oferh@marvell.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 17556cdb ] Commit 8f18c8a4 ("staging: lustre: lmv: separate master object with master stripe") changed how lmo_root inodes were managed, particularly when LMV_HASH_FLAG_MIGRATION is not set. Previously lsm_md_oinfo[0].lmo_root was always a borrowed inode reference and didn't need to by iput(). Since the change, that special case only applies when LMV_HASH_FLAG_MIGRATION is set In the upstream (lustre-release) version of this patch [Commit 60e07b972114 ("LU-4690 lod: separate master object with master stripe")] the for loop in the lmv_unpack_md() was changed to count from 0 and to ignore entry 0 if LMV_HASH_FLAG_MIGRATION is set. In the patch that got applied to Linux, that change was missing, so lsm_md_oinfo[0].lmo_root is never iput(). This results in a "VFS: Busy inodes" warning at unmount. Fixes: 8f18c8a4 ("staging: lustre: lmv: separate master object with master stripe") Signed-off-by:
NeilBrown <neilb@suse.com> Reviewed-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Quytelda Kahja authored
[ Upstream commit dc13498a ] The case statement in get_ap_information() should not use literal integers to parse information element IDs when these values are provided by name in 'enum ieee80211_eid' in the header 'linux/ieee80211.h'. Signed-off-by:
Quytelda Kahja <quytelda@tamalin.org> Reviewed-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit e1a74185 ] Currently the allocation of priv->oldaddr is not null checked which will lead to subsequent errors when accessing priv->oldaddr. Fix this with a null pointer check and a return of -ENOMEM on allocation failure. Detected with Coccinelle: drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test, possible model on line 1723 Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ioana Radulescu authored
[ Upstream commit 75c583ab ] The DPAA2 Ethernet driver incorrectly assumes virtual addresses are always 64b long, which causes compiler errors when building for a 32b platform. Fix this by using explicit casts to uintptr_t where necessary. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 2fab9faf ] The lustre-release patch commit bdc5bb52c554 ("LU-4933 osc: Automatically increase the max_dirty_mb") changed - if (cli->cl_dirty + PAGE_CACHE_SIZE <= cli->cl_dirty_max && + if (cli->cl_dirty_pages < cli->cl_dirty_max_pages && When this patch landed in Linux a couple of years later, it landed as - if (cli->cl_dirty + PAGE_SIZE <= cli->cl_dirty_max && + if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages && which is clearly different ('<=' vs '<'), and allows cl_dirty_pages to increase beyond cl_dirty_max_pages - which causes a latter assertion to fails. Fixes: 3147b268 ("staging: lustre: osc: Automatically increase the max_dirty_mb") Signed-off-by:
-
Kirill Marinushkin authored
[ Upstream commit 626118b4 ] In the current implementation, `rmmod snd_bcm2835` does not release resources properly. It causes an oops when trying to list sound devices. This commit fixes it. The details WRT allocation / free are described below. Device structure WRT allocation: pdev \childdev[] \card \chip \pcm \ctl Allocation / register sequence: * childdev: devm_kzalloc - freed during driver detach * childdev: device_initialize - freed during device_unregister * pdev: devres_alloc - freed during driver detach * childdev: device_add - removed during device_unregister * pdev, childdev: devres_add - freed during driver detach * card: snd_card_new - freed during snd_card_free * chip: kzalloc - freed during kfree * card, chip: snd_device_new - freed during snd_device_free * chip: new_pcm - TODO: free pcm * chip: new_ctl - TODO: free ctl * card: snd_card_register - unregistered during snd_card_free Free / unregister sequence: * card: snd_card_free * card, chip: snd_device_free * childdev: device_unregister * chip: kfree Steps to reproduce the issue before this commit: ~~~~ $ rmmod snd_bcm2835 $ aplay -L [ 138.648130] Unable to handle kernel paging request at virtual address 7f1343c0 [ 138.660415] pgd = ad8f0000 [ 138.665567] [7f1343c0] *pgd=3864c811, *pte=00000000, *ppte=00000000 [ 138.674887] Internal error: Oops: 7 [#1] SMP ARM [ 138.683571] Modules linked in: sha256_generic cfg80211 rfkill snd_pcm snd_timer snd fixed uio_pdrv_genirq uio ip_tables x_tables ipv6 [last unloaded: snd_bcm2835 ] [ 138.706594] CPU: 3 PID: 463 Comm: aplay Tainted: G WC 4.15.0-rc1-v 7+ #6 [ 138.719833] Hardware name: BCM2835 [ 138.726016] task: b877ac00 task.stack: aebec000 [ 138.733408] PC is at try_module_get+0x38/0x24c [ 138.740813] LR is at snd_ctl_open+0x58/0x194 [snd] [ 138.748485] pc : [<801c4d5c>] lr : [<7f0e6b2c>] psr: 20000013 [ 138.757709] sp : aebedd60 ip : aebedd88 fp : aebedd84 [ 138.765884] r10: 00000000 r9 : 00000004 r8 : 7f0ed440 [ 138.774040] r7 : b7e469b0 r6 : 7f0e6b2c r5 : afd91900 r4 : 7f1343c0 [ 138.783571] r3 : aebec000 r2 : 00000001 r1 : b877ac00 r0 : 7f1343c0 [ 138.793084] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 138.803300] Control: 10c5387d Table: 2d8f006a DAC: 00000055 [ 138.812064] Process aplay (pid: 463, stack limit = 0xaebec210) [ 138.820868] Stack: (0xaebedd60 to 0xaebee000) [ 138.828207] dd60: 00000000 b848d000 afd91900 00000000 b7e469b0 7f0ed440 aebedda4 aebedd88 [ 138.842371] dd80: 7f0e6b2c 801c4d30 afd91900 7f0ea4dc 00000000 b7e469b0 aebeddcc aebedda8 [ 138.856611] dda0: 7f0e250c 7f0e6ae0 7f0e2464 b8478ec0 b7e469b0 afd91900 7f0ea388 00000000 [ 138.870864] ddc0: aebeddf4 aebeddd0 802ce590 7f0e2470 8090ab64 afd91900 afd91900 b7e469b0 [ 138.885301] dde0: afd91908 802ce4e4 aebede1c aebeddf8 802c57b4 802ce4f0 afd91900 aebedea8 [ 138.900110] de00: b7fa4c00 00000000 00000000 00000004 aebede3c aebede20 802c6ba8 802c56b4 [ 138.915260] de20: aebedea8 00000000 aebedf5c 00000000 aebedea4 aebede40 802d9a68 802c6b58 [ 138.930661] de40: b874ddd0 00000000 00000000 00000001 00000041 00000000 afd91900 aebede70 [ 138.946402] de60: 00000000 00000000 00000002 b7e469b0 b8a87610 b8d6ab80 801852f8 00080000 [ 138.962314] de80: aebedf5c aebedea8 00000001 80108464 aebec000 00000000 aebedf4c aebedea8 [ 138.978414] dea0: 802dacd4 802d970c b8a87610 b8d6ab80 a7982bc6 00000009 af363019 b9231480 [ 138.994617] dec0: 00000000 b8c038a0 b7e469b0 00000101 00000002 00000238 00000000 00000000 [ 139.010823] dee0: 00000000 aebedee8 00080000 0000000f aebedf3c aebedf00 802ed7e4 80843f94 [ 139.027025] df00: 00000003 00080000 b9231490 b9231480 00000000 00080000 af363000 00000000 [ 139.043229] df20: 00000005 00000002 ffffff9c 00000000 00080000 ffffff9c af363000 00000003 [ 139.059430] df40: aebedf94 aebedf50 802c6f70 802dac70 aebec000 00000000 00000001 00000000 [ 139.075629] df60: 00020000 00000004 00000100 00000001 7ebe577c 0002e038 00000000 00000005 [ 139.091828] df80: 80108464 aebec000 aebedfa4 aebedf98 802c7060 802c6e6c 00000000 aebedfa8 [ 139.108025] dfa0: 801082c0 802c7040 7ebe577c 0002e038 7ebe577c 00080000 00000b98 e81c8400 [ 139.124222] dfc0: 7ebe577c 0002e038 00000000 00000005 7ebe57e4 00a20af8 7ebe57f0 76f87394 [ 139.140419] dfe0: 00000000 7ebe55c4 76ec88e8 76df1d9c 60000010 7ebe577c 00000000 00000000 [ 139.156715] [<801c4d5c>] (try_module_get) from [<7f0e6b2c>] (snd_ctl_open+0x58/0x194 [snd]) [ 139.173222] [<7f0e6b2c>] (snd_ctl_open [snd]) from [<7f0e250c>] (snd_open+0xa8/0x14c [snd]) [ 139.189683] [<7f0e250c>] (snd_open [snd]) from [<802ce590>] (chrdev_open+0xac/0x188) [ 139.205465] [<802ce590>] (chrdev_open) from [<802c57b4>] (do_dentry_open+0x10c/0x314) [ 139.221347] [<802c57b4>] (do_dentry_open) from [<802c6ba8>] (vfs_open+0x5c/0x88) [ 139.236788] [<802c6ba8>] (vfs_open) from [<802d9a68>] (path_openat+0x368/0x944) [ 139.248270] [<802d9a68>] (path_openat) from [<802dacd4>] (do_filp_open+0x70/0xc4) [ 139.263731] [<802dacd4>] (do_filp_open) from [<802c6f70>] (do_sys_open+0x110/0x1d4) [ 139.279378] [<802c6f70>] (do_sys_open) from [<802c7060>] (SyS_open+0x2c/0x30) [ 139.290647] [<802c7060>] (SyS_open) from [<801082c0>] (ret_fast_syscall+0x0/0x28) [ 139.306021] Code: e3c3303f e5932004 e2822001 e5832004 (e5943000) [ 139.316265] ---[ end trace 7f3f7f6193b663ed ]--- [ 139.324956] note: aplay[463] exited with preempt_count 1 ~~~~ Signed-off-by:
Kirill Marinushkin <k.marinushkin@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Michael Zoran <mzoran@crowfest.net> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: devel@driverdev.osuosl.org Cc: linux-kernel@vger.kernel.org Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit 0ee78c10 ] xhci driver displays the supported xHC USB revision in a message during driver load: "Host supports USB 3.1 Enhanced SuperSpeed" Get the USB minor revision number from the xhci protocol capability. This will show the correct supported revisions for new USB 3.2 and later hosts Don't rely on the SBRN (serial bus revision number) register, it's often showing 0x30 (USB3.0) for hosts that support USB 3.1 Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Larry Finger authored
[ Upstream commit fed03fe7 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by:
Hon Weng Chong <honwchong@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Brad Love authored
[ Upstream commit c7c7e8d7 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Brad Love authored
[ Upstream commit 835d6617 ] When used as an i2c device there is a module usage count mismatch on removal, preventing the driver from being used thereafter. dvb_attach increments the usage count so it is properly balanced on removal. On disconnect of Hauppauge SoloHD/DualHD before: lsmod | grep lgdt3306a lgdt3306a 28672 -1 i2c_mux 16384 1 lgdt3306a On disconnect of Hauppauge SoloHD/DualHD after: lsmod | grep lgdt3306a lgdt3306a 28672 0 i2c_mux 16384 1 lgdt3306a Signed-off-by:
-
Chris Dickens authored
[ Upstream commit 5d6ae4f0 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by:
Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit ac87e560 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 351a8d48 ] Now that usbip supports USB3, the maximum number of ports allowed on a hub is 15 (USB_SS_MAXPORTS), not 31 (USB_MAXCHILDREN). Reported-by:
Gianluigi Tiesi <sherpya@netfarm.it> Reported-by:
Borissh1983 <borissh1983@gmail.com> References: https://bugs.debian.org/878866 Fixes: 1c9de5bf ("usbip: vhci-hcd: Add USB3 SuperSpeed support") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 4058ebf3 ] When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [<ffffff800847b790>] __arch_copy_to_user+0x190/0x220 [<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130 [<ffffff80080b8c64>] process_one_work+0x1dc/0x460 [<ffffff80080b8f38>] worker_thread+0x50/0x4b0 [<ffffff80080bf5a0>] kthread+0xd8/0xf0 [<ffffff8008083680>] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde35 ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
[ Upstream commit 946ef68a ] Some UDC drivers (like the DWC3) expect that the response to a setup() request is queued from within the setup function itself so that it is available as soon as setup() has completed. Upon receiving a setup request the function fs driver creates an event that is made available to userspace. And only once userspace has acknowledged that event the response to the setup request is queued. So it violates the requirement of those UDC drivers and random failures can be observed. This is basically a race condition and if userspace is able to read the event and queue the response fast enough all is good. But if it is not, for example because other processes are currently scheduled to run, the USB host that sent the setup request will observe an error. To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS return code. If a setup() callback returns this value the UDC driver is aware that response is not yet available and can uses the appropriate methods to handle this case. Since in the case of function fs the response will never be available when the setup() function returns make sure that this status code is used. This fixed random occasional failures that were previously observed on a DWC3 based system under high system load. Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit 92a8dd26 ] Added missing GUSBCFG programming in host mode, which fixes transaction errors issue on HiKey and Altera Cyclone V boards. These field even if was programmed in device mode (in function dwc2_hsotg_core_init_disconnected()) will be resetting to POR values after core soft reset applied. So, each time when switching to host mode required to set this field to correct value. Acked-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by:
-
Minas Harutyunyan authored
[ Upstream commit a82c7abd ] According databook in Buffer and External DMA mode non-split periodic channels can't be halted. Acked-by:
-
Grigor Tovmasyan authored
[ Upstream commit 12814a3f ] The maximum value that unsigned char can hold is 255, meanwhile the maximum value of interval is 2^(bIntervalMax-1)=2^15. Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit a400efe4 ] set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit de948a74 ] If building a kernel without FTRACE but with TRACING, dwc3.ko fails to link due to missing trace events. Fix this by using the correct Kconfig symbol on Makefile. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit 0cab8d26 ] Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM. The GTXFIFOSIZ register for DWC_usb31 is as follows: +-------+-----------+----------------------------------+ | BITS | Name | Description | +=======+===========+==================================+ | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address | | 15 | TXFRAMNUM | Asynchronous/Periodic TXFIFO | | 14:0 | TXFDEP | TXFIFO Depth | +-------+-----------+----------------------------------+ Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit fab38333 ] >From DWC_usb31 programming guide section 1.3.2, once DWC3_DCTL_CSFTRST bit is cleared, we must wait at least 50ms before accessing the PHY domain (synchronization delay). Signed-off-by:
-
Nobutaka Okabe authored
[ Upstream commit 71426535 ] Add native DSD support quirk for Luxman DA-06 DAC, by adding the PID/VID 1852:5065. Rename "is_marantz_denon_dac()" function to "is_itf_usb_dsd_2alts_dac()" to cover broader device family sharing the same USB audio implementation(*). For the same reason, rename "is_teac_dsd_dac()" function to "is_itf_usb_dsd_3alts_dac()". (*) These devices have the same USB controller "ITF-USB DSD", supplied by INTERFACE Co., Ltd. "ITF-USB DSD" USB controller has two patterns, Pattern 1. (2 altsets version) - Altset 0: for control - Altset 1: for stream (S32) - Altset 2: for stream (S32, DSD_U32) Pattern 2. (3 altsets version) - Altset 0: for control - Altset 1: for stream (S16) - Altset 2: for stream (S32) - Altset 3: for stream (S32, DSD_U32) "is_itf_usb_dsd_2alts_dac()" returns true, if the DAC has "Pattern 1" USB controller, and "is_itf_usb_dsd_3alts_dac()" returns true, if "Pattern2". Signed-off-by:
Nobutaka Okabe <nob77413@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vicente Bergas authored
[ Upstream commit a41e0796 ] This WiFi/Bluetooth USB dongle uses a Realtek chipset, so, use btrtl for it. Product information: https://wikidevi.com/wiki/Edimax_EW-7611ULB >From /sys/kernel/debug/usb/devices T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=a611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Wi-Fi N150 Bluetooth4.0 USB Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 6 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8723bu E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
-
Giuseppe Lippolis authored
[ Upstream commit d4c4bc11 ] This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:
Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Torsten Hilbrich authored
[ Upstream commit f3d801ba ] This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
-
Fredrik Noring authored
[ Upstream commit d6c931ea ] Scatter-gather needs to be disabled when using dma_declare_coherent_memory and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers in commit 4307a28e "USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM". The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8 Modules linked in: CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014 Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031 805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000 00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420 805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538 00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000 ... Call Trace: [<578af360>] show_stack+0x74/0x104 [<2f3702c6>] __warn+0x118/0x120 [<ae93fc9e>] warn_slowpath_null+0x44/0x58 [<a891a517>] hcd_alloc_coherent+0x4c/0xc8 [<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534 [<110bc94c>] usb_hcd_submit_urb+0x82c/0x834 [<02eb5baf>] usb_sg_wait+0x14c/0x1a0 [<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124 [<87a5c34c>] usb_stor_bulk_srb+0x40/0x60 [<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c [<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500 [<004754f4>] usb_stor_control_thread+0x258/0x28c [<22edf42e>] kthread+0x134/0x13c [<a419ffd0>] ret_from_kernel_thread+0x14/0x1c ---[ end trace bcdb825805eefdcc ]--- Signed-off-by:
Fredrik Noring <noring@nocrew.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit d56e57ca ] This patch reverts the commit 835e4241 ("usb: host: xhci-plat: enable clk in resume timing") because this driver also has runtime PM and the commit 56086910 ("clk: renesas: cpg-mssr: Restore module clocks during resume") will restore the clock on R-Car H3 environment. If the xhci_plat_suspend() disables the clk, the system cannot enable the clk in resume like the following behavior: < In resume > - genpd_resume_noirq() runs and enable the clk (enable_count = 1) - cpg_mssr_resume_noirq() restores the clk register. -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq() will disable the clk and keep the enable_count. - Even if xhci_plat_resume() calls clk_prepare_enable(), since the enable_count is 1, the clk will be not enabled. After this patch is applied, the cpg-mssr driver will save the clk as enable, so the clk will be enabled in resume. Fixes: 835e4241 ("usb: host: xhci-plat: enable clk in resume timing") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Leonard Crestez authored
[ Upstream commit 970656b3 ] The two usb-otg regulators for imx7d-sdb are both called "regulator-usb-otg1-vbus" and they effectively override each other. This is most likely a copy-paste error. Fixes: b877039a ("ARM: dts: imx7d-sdb: Adjust the regulator nodes") Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2695578b ] Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129 ("net: usbnet: support 64bit stats") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by:
-
