All grant table operations related to the "transfer" functionality
are unused currently. There have been users in the old days of the
"Xen-o-Linux" kernel, but those didn't make it upstream.

So remove the "transfer" related functions.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-2-jgross@suse.comReviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Use helper macro __ATTR_RW to define HYPERVISOR_ATTR_RW to make code more clear.
Minor readability improvement.

Remove extra whitespace [boris: added this comment]
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220305133823.158961-1-zhanglianjie@uniontech.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Fix the following W=1 kernel warnings:

arch/x86/xen/setup.c:725: warning: expecting prototype for
machine_specific_memory_setup(). Prototype was for xen_memory_setup()
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220307062554.8334-1-jiapeng.chong@linux.alibaba.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

The sched_clock() can be used very early since commit 857baa87
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba2 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:

setup_arch()
 -> init_hypervisor_platform()
     -> x86_init.hyper.init_platform = xen_hvm_guest_init()
         -> xen_hvm_init_time_ops()
             -> xen_clocksource_read()
                 -> src = &__this_cpu_read(xen_vcpu)->time;

This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.

However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.

This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.

This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:

"taskset -c 33 echo c > /proc/sysrq-trigger"

The bugfix for PVM is not implemented due to the lack of testing
environment.

[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]

Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Use the helper function time_is_{before,after}_jiffies() to improve
code readability.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1646018104-61415-1-git-send-email-wangqing@vivo.comSigned-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>

Pull spi fix from Mark Brown:
 "One fix for type conversion issues when working out maximum
  scatter/gather segment sizes.

  It caused problems for some systems where the limits overflow
  due to the type conversion"

* tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Fix invalid sgs value

The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().

Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gpio fixes from Bartosz Golaszewski:

 - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186

 - revert changes that caused a regression in the sysfs user-space
   interface

 - correct the debounce time conversion in GPIO ACPI

 - statify a struct in gpio-sim and fix a typo

 - update registers in correct order (hardware quirk) in gpio-ts4900

* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix a typo
  gpio: ts4900: Do not set DAT and OE together
  gpio: sim: Declare gpio_sim_hog_config_item_ops static
  gpiolib: acpi: Convert ACPI value of debounce to microseconds
  gpio: Revert regression in sysfs-gpio (gpiolib.c)
  gpio: tegra186: Add IRQ per bank for Tegra241

Just noticed this when applying Andy's patch. s/childred/children/

Fixes: cb8c474e ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.

Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.

Fixes: 9c668632 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Pull clk fixes from Stephen Boyd:
 "One more small batch of clk driver fixes:

   - A fix for the Qualcomm GDSC power domain delays that avoids black
     screens at boot on some more recent SoCs that use a different delay
     than the hard-coded delays in the driver.

   - A build fix LAN966X clk driver that let it be built on
     architectures that didn't have IOMEM"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: lan966x: Fix linking error
  clk: qcom: dispcc: Update the transition delay for MDSS GDSC
  clk: qcom: gdsc: Add support to update GDSC transition delay

Pull xen fixes from Juergen Gross:
 "Several Linux PV device frontends are using the grant table interfaces
  for removing access rights of the backends in ways being subject to
  race conditions, resulting in potential data leaks, data corruption by
  malicious backends, and denial of service triggered by malicious
  backends:

   - blkfront, netfront, scsifront and the gntalloc driver are testing
     whether a grant reference is still in use. If this is not the case,
     they assume that a following removal of the granted access will
     always succeed, which is not true in case the backend has mapped
     the granted page between those two operations.

     As a result the backend can keep access to the memory page of the
     guest no matter how the page will be used after the frontend I/O
     has finished. The xenbus driver has a similar problem, as it
     doesn't check the success of removing the granted access of a
     shared ring buffer.

   - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p,
     kbdfront, and pvcalls are using a functionality to delay freeing a
     grant reference until it is no longer in use, but the freeing of
     the related data page is not synchronized with dropping the granted
     access.

     As a result the backend can keep access to the memory page even
     after it has been freed and then re-used for a different purpose.

   - netfront will fail a BUG_ON() assertion if it fails to revoke
     access in the rx path.

     This will result in a Denial of Service (DoS) situation of the
     guest which can be triggered by the backend"

* tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/netfront: react properly to failing gnttab_end_foreign_access_ref()
  xen/gnttab: fix gnttab_end_foreign_access() without page specified
  xen/pvcalls: use alloc/free_pages_exact()
  xen/9p: use alloc/free_pages_exact()
  xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done()
  xen: remove gnttab_query_foreign_access()
  xen/gntalloc: don't use gnttab_query_foreign_access()
  xen/scsifront: don't use gnttab_query_foreign_access() for mapped status
  xen/netfront: don't use gnttab_query_foreign_access() for mapped status
  xen/blkfront: don't use gnttab_query_foreign_access() for mapped status
  xen/grant-table: add gnttab_try_end_foreign_access()
  xen/xenbus: don't let xenbus_grant_ring() remove grants in error case

Pull arm64 build fix from Catalin Marinas:
 "Fix kernel build with clang LTO after the inclusion of the Spectre BHB
  arm64 mitigations"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Do not include __READ_ONCE() block in assembly files

ld.lld does not support the NOCROSSREFS directive at the moment, which
breaks the build after commit b9baf5c8 ("ARM: Spectre-BHB
workaround"):

  ld.lld: error: ./arch/arm/kernel/vmlinux.lds:34: AT expected, but got NOCROSSREFS

Support for this directive will eventually be implemented, at which
point a version check can be added. To avoid breaking the build in the
meantime, just define NOCROSSREFS to nothing when using ld.lld, with a
link to the issue for tracking.

Cc: stable@vger.kernel.org
Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Link: https://github.com/ClangBuiltLinux/linux/issues/1609Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building arm64 defconfig + CONFIG_LTO_CLANG_{FULL,THIN}=y after
commit 558c303c ("arm64: Mitigate spectre style branch history side
channels"), the following error occurs:

  <instantiation>:4:2: error: invalid fixup for movz/movk instruction
   mov w0, #ARM_SMCCC_ARCH_WORKAROUND_3
   ^

Marc figured out that moving "#include <linux/init.h>" in
include/linux/arm-smccc.h into a !__ASSEMBLY__ block resolves it. The
full include chain with CONFIG_LTO=y from include/linux/arm-smccc.h:

include/linux/init.h
include/linux/compiler.h
arch/arm64/include/asm/rwonce.h
arch/arm64/include/asm/alternative-macros.h
arch/arm64/include/asm/assembler.h

The asm/alternative-macros.h include in asm/rwonce.h only happens when
CONFIG_LTO is set, which ultimately casues asm/assembler.h to be
included before the definition of ARM_SMCCC_ARCH_WORKAROUND_3. As a
result, the preprocessor does not expand ARM_SMCCC_ARCH_WORKAROUND_3 in
__mitigate_spectre_bhb_fw, which results in the error above.

Avoid this problem by just avoiding the CONFIG_LTO=y __READ_ONCE() block
in asm/rwonce.h with assembly files, as nothing in that block is useful
to assembly files, which allows ARM_SMCCC_ARCH_WORKAROUND_3 to be
properly expanded with CONFIG_LTO=y builds.

Fixes: e35123d8 ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: <stable@vger.kernel.org> # 5.11.x
Link: https://lore.kernel.org/r/20220309155716.3988480-1-maz@kernel.org/Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220309191633.2307110-1-nathan@kernel.orgSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull HID fixes from Jiri Kosina:

 - sysfs attributes leak fix for Google Vivaldi driver (Dmitry Torokhov)

 - fix for potential out-of-bounds read in Thrustmaster driver (Pavel
   Skripkin)

 - error handling reference leak in Elo driver (Jiri Kosina)

 - a few new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: nintendo: check the return value of alloc_workqueue()
  HID: vivaldi: fix sysfs attributes leak
  HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts
  HID: elo: Revert USB reference counting
  HID: Add support for open wheel and no attachment to T300
  HID: logitech-dj: add new lightspeed receiver id

Pull arm64 fixes from Catalin Marinas:

 - Fix compilation of eBPF object files that indirectly include
   mte-kasan.h.

 - Fix test for execute-only permissions with EPAN (Enhanced Privileged
   Access Never, ARMv8.7 feature).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kasan: fix include error in MTE functions
  arm64: Ensure execute-only permissions are not allowed without EPAN

In the recent Spectre BHB patches, there was a typo that is only
exposed in certain configurations: mcr p15,0,XX,c7,r5,4 should have
been mcr p15,0,XX,c7,c5,4
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix `error: expected string literal in 'asm'`.
This happens when compiling an ebpf object file that includes
`net/net_namespace.h` from linux kernel headers.

Include trace:
     include/net/net_namespace.h:10
     include/linux/workqueue.h:9
     include/linux/timer.h:8
     include/linux/debugobjects.h:6
     include/linux/spinlock.h:90
     include/linux/workqueue.h:9
     arch/arm64/include/asm/spinlock.h:9
     arch/arm64/include/generated/asm/qrwlock.h:1
     include/asm-generic/qrwlock.h:14
     arch/arm64/include/asm/processor.h:33
     arch/arm64/include/asm/kasan.h:9
     arch/arm64/include/asm/mte-kasan.h:45
     arch/arm64/include/asm/mte-def.h:14
Signed-off-by: Paul Semel <paul.semel@datadoghq.com>
Fixes: 2cb34276 ("arm64: kasan: simplify and inline MTE functions")
Cc: <stable@vger.kernel.org> # 5.12.x
Link: https://lore.kernel.org/r/bacb5387-2992-97e4-0c48-1ed925905bee@gmail.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

It was missing a semicolon.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 25875aa7 ("ARM: include unprivileged BPF status in Spectre V2 reporting").
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull devicetree fixes from Rob Herring:

 - Fix pinctrl node name warnings in examples

 - Add missing 'mux-states' property in ti,tcan104x-can binding

* tag 'devicetree-fixes-for-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: phy: ti,tcan104x-can: Document mux-states property
  dt-bindings: mfd: Fix pinctrl node name warnings

Pull fuse fixes from Miklos Szeredi:

 - Fix an issue with splice on the fuse device

 - Fix a regression in the fileattr API conversion

 - Add a small userspace API improvement

* tag 'fuse-fixes-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix pipe buffer lifetime for direct_io
  fuse: move FUSE_SUPER_MAGIC definition to magic.h
  fuse: fix fileattr op failure

Merge tag 'arm64-spectre-bhb-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 spectre fixes from James Morse:
 "ARM64 Spectre-BHB mitigations:

   - Make EL1 vectors per-cpu

   - Add mitigation sequences to the EL1 and EL2 vectors on vulnerble
     CPUs

   - Implement ARCH_WORKAROUND_3 for KVM guests

   - Report Vulnerable when unprivileged eBPF is enabled"

* tag 'arm64-spectre-bhb-for-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: proton-pack: Include unprivileged eBPF status in Spectre v2 mitigation reporting
  arm64: Use the clearbhb instruction in mitigations
  KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated
  arm64: Mitigate spectre style branch history side channels
  arm64: proton-pack: Report Spectre-BHB vulnerabilities as part of Spectre-v2
  arm64: Add percpu vectors for EL1
  arm64: entry: Add macro for reading symbol addresses from the trampoline
  arm64: entry: Add vectors that have the bhb mitigation sequences
  arm64: entry: Add non-kpti __bp_harden_el1_vectors for mitigations
  arm64: entry: Allow the trampoline text to occupy multiple pages
  arm64: entry: Make the kpti trampoline's kpti sequence optional
  arm64: entry: Move trampoline macros out of ifdef'd section
  arm64: entry: Don't assume tramp_vectors is the start of the vectors
  arm64: entry: Allow tramp_alias to access symbols after the 4K boundary
  arm64: entry: Move the trampoline data page before the text page
  arm64: entry: Free up another register on kpti's tramp_exit path
  arm64: entry: Make the trampoline cleanup optional
  KVM: arm64: Allow indirect vectors to be used without SPECTRE_V3A
  arm64: spectre: Rename spectre_v4_patch_fw_mitigation_conduit
  arm64: entry.S: Add ventry overflow sanity checks

Pull ARM spectre fixes from Russell King:
 "ARM Spectre BHB mitigations.

  These patches add Spectre BHB migitations for the following Arm CPUs
  to the 32-bit ARM kernels:
   - Cortex A15
   - Cortex A57
   - Cortex A72
   - Cortex A73
   - Cortex A75
   - Brahma B15
  for CVE-2022-23960"

* tag 'for-linus-bhb' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: include unprivileged BPF status in Spectre V2 reporting
  ARM: Spectre-BHB workaround
  ARM: use LOADADDR() to get load address of sections
  ARM: early traps initialisation
  ARM: report Spectre v2 status through sysfs

On some boards, for routing CAN signals from controller to transceivers,
muxes might need to be set. This can be implemented using mux-states
property. Therefore, document the same in the respective bindings.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211216041012.16892-2-a-govindraju@ti.com

The recent addition pinctrl.yaml in commit c09acbc4 ("dt-bindings:
pinctrl: use pinctrl.yaml") resulted in some node name warnings:

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \
 lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \
 codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \
 pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'

Fix the node names to the preferred 'pinctrl'. For cirrus,madera,
nothing from pinctrl.yaml schema is used, so just drop the reference.

Fixes: c09acbc4 ("dt-bindings: pinctrl: use pinctrl.yaml")
Cc: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org

The mitigations for Spectre-BHB are only applied when an exception
is taken, but when unprivileged BPF is enabled, userspace can
load BPF programs that can be used to exploit the problem.

When unprivileged BPF is enabled, report the vulnerable status via
the spectre_v2 sysfs file.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

max_seg_size is unsigned int and it can have a value up to 2^32
(for eg:-RZ_DMAC driver sets dma_set_max_seg_size as U32_MAX)
When this value is used in min_t() as an integer type, it becomes
-1 and the value of sgs becomes 0.

Fix this issue by replacing the 'int' data type with 'unsigned int'
in min_t().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220307184843.9994-1-biju.das.jz@bp.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 18107f8a ("arm64: Support execute-only permissions with
Enhanced PAN") re-introduced execute-only permissions when EPAN is
available. When EPAN is not available, arch_filter_pgprot() is supposed
to change a PAGE_EXECONLY permission into PAGE_READONLY_EXEC. However,
if BTI or MTE are present, such check does not detect the execute-only
pgprot in the presence of PTE_GP (BTI) or MT_NORMAL_TAGGED (MTE),
allowing the user to request PROT_EXEC with PROT_BTI or PROT_MTE.

Remove the arch_filter_pgprot() function, change the default VM_EXEC
permissions to PAGE_READONLY_EXEC and update the protection_map[] array
at core_initcall() if EPAN is detected.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 18107f8a ("arm64: Support execute-only permissions with Enhanced PAN")
Cc: <stable@vger.kernel.org> # 5.13.x
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>

Compiler is not happy:

  warning: symbol 'gpio_sim_hog_config_item_ops' was not declared. Should it be static?

Fixes: cb8c474e ("gpio: sim: new testing module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Pull x86 spectre fixes from Borislav Petkov:

 - Mitigate Spectre v2-type Branch History Buffer attacks on machines
   which support eIBRS, i.e., the hardware-assisted speculation
   restriction after it has been shown that such machines are vulnerable
   even with the hardware mitigation.

 - Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
   it is insufficient to mitigate such attacks. Instead, switch to
   retpolines on all AMD by default.

 - Update the docs and add some warnings for the obviously vulnerable
   cmdline configurations.

* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
  x86/speculation: Warn about Spectre v2 LFENCE mitigation
  x86/speculation: Update link to AMD speculation whitepaper
  x86/speculation: Use generic retpoline by default on AMD
  x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
  Documentation/hw-vuln: Update spectre doc
  x86/speculation: Add eIBRS + Retpoline options
  x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE

Pull MTD fix from Miquel Raynal:
 "As part of a previous changeset introducing support for the K3
  architecture, the OMAP_GPMC (a non visible symbol) got selected by the
  selection of MTD_NAND_OMAP2 instead of doing so from the architecture
  directly (like for the other users of these two drivers). Indeed, from
  a hardware perspective, the OMAP NAND controller needs the GPMC to
  work.

  This led to a robot error which got addressed in fix merge into -rc4.
  Unfortunately, the approach at this time still used "select" and lead
  to further build error reports (sparc64:allmodconfig).

  This time we switch to 'depends on' in order to prevent random
  misconfigurations. The different dependencies will however need a
  future cleanup"

* tag 'mtd/fixes-for-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: omap2: Actually prevent invalid configuration and build error

Pull virtio fixes from Michael Tsirkin:
 "Some last minute fixes that took a while to get ready. Not
  regressions, but they look safe and seem to be worth to have"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: handle fallout from folio work
  tools/virtio: fix virtio_test execution
  vhost: remove avail_event arg from vhost_update_avail_event()
  virtio: drop default for virtio-mem
  vdpa: fix use-after-free on vp_vdpa_remove
  virtio-blk: Remove BUG_ON() in virtio_queue_rq()
  virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero
  vhost: fix hung thread due to erroneous iotlb entries
  vduse: Fix returning wrong type in vduse_domain_alloc_iova()
  vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command
  vdpa/mlx5: should verify CTRL_VQ feature exists for MQ
  vdpa: factor out vdpa_set_features_unlocked for vdpa internal use
  virtio_console: break out of buf poll on remove
  virtio: document virtio_reset_device
  virtio: acknowledge all features before access
  virtio: unexport virtio_finalize_features

Unfortunately, we ended up merging an old version of the patch "fix info
leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph
(the swiotlb maintainer), he asked me to create an incremental fix
(after I have pointed this out the mix up, and asked him for guidance).
So here we go.

The main differences between what we got and what was agreed are:
* swiotlb_sync_single_for_device is also required to do an extra bounce
* We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters
* The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE
  must take precedence over DMA_ATTR_SKIP_CPU_SYNC

Thus this patch removes DMA_ATTR_OVERWRITE, and makes
swiotlb_sync_single_for_device() bounce unconditionally (that is, also
when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale
data from the swiotlb buffer.

Let me note, that if the size used with dma_sync_* API is less than the
size used with dma_[un]map_*, under certain circumstances we may still
end up with swiotlb not being transparent. In that sense, this is no
perfect fix either.

To get this bullet proof, we would have to bounce the entire
mapping/bounce buffer. For that we would have to figure out the starting
address, and the size of the mapping in
swiotlb_sync_single_for_device(). While this does seem possible, there
seems to be no firm consensus on how things are supposed to work.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: ddbd89de ("swiotlb: fix info leak with DMA_FROM_DEVICE")
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mitigations for Spectre-BHB are only applied when an exception is
taken from user-space. The mitigation status is reported via the spectre_v2
sysfs vulnerabilities file.

When unprivileged eBPF is enabled the mitigation in the exception vectors
can be avoided by an eBPF program.

When unprivileged eBPF is enabled, print a warning and report vulnerable
via the sysfs vulnerabilities file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>

The root of the problem is that we are selecting symbols that have
dependencies. This can cause random configurations that can fail.
The cleanest solution is to avoid using select.

This driver uses interfaces from the OMAP_GPMC driver so we have to
depend on it instead.

Fixes: 4cd335da ("mtd: rawnand: omap2: Prevent invalid configuration and build error")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org

In FOPEN_DIRECT_IO mode, fuse_file_write_iter() calls
fuse_direct_write_iter(), which normally calls fuse_direct_io(), which then
imports the write buffer with fuse_get_user_pages(), which uses
iov_iter_get_pages() to grab references to userspace pages instead of
actually copying memory.

On the filesystem device side, these pages can then either be read to
userspace (via fuse_dev_read()), or splice()d over into a pipe using
fuse_dev_splice_read() as pipe buffers with &nosteal_pipe_buf_ops.

This is wrong because after fuse_dev_do_read() unlocks the FUSE request,
the userspace filesystem can mark the request as completed, causing write()
to return. At that point, the userspace filesystem should no longer have
access to the pipe buffer.

Fix by copying pages coming from the user address space to new pipe
buffers.
Reported-by: Jann Horn <jannh@google.com>
Fixes: c3021629 ("fuse: support splice() reading from fuse device")
Cc: <stable@vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

It appears that GPIO ACPI library uses ACPI debounce values directly.
However, the GPIO library APIs expect the debounce timeout to be in
microseconds.

Convert ACPI value of debounce to microseconds.

While at it, document this detail where it is appropriate.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215664Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Fixes: 8dcb7a15 ("gpiolib: acpi: Take into account debounce settings")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Some GPIO lines have stopped working after the patch
commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")

And this has supposedly been fixed in the following patches
commit 89ad556b ("gpio: Avoid using pin ranges with !PINCTRL")
commit 6dbbf846 ("gpiolib: Don't free if pin ranges are not defined")

But an erratic behavior where some GPIO lines work while others do not work
has been introduced.

This patch reverts those changes so that the sysfs-gpio interface works
properly again.
Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Add the number of interrupts per bank for Tegra241 (Grace) to
fix the probe failure.

Fixes: d1056b77 ("gpio: tegra186: Add support for Tegra241")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>