[ Upstream commit 4c70850a ]

Add the binding for RX/TX fifo size of GMAC node.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ecc906a1 ]

GMAC controller on HSDK boards supports 256 Hash Table size so we need to
add the multicast filter bins property. This allows for the Hash filter
to work properly using stmmac driver.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c434e377 ]

Move the 2-stage configuration before configuring the link-list mode,
since we will use some 2-stage configuration to fill the link-list
configuration.
Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 89d03b3c ]

The maximum value of block length is 0xffff, so if the configured transfer length
is more than 0xffff, that will cause block length overflow to lead a configuration
error.

Thus we can set block length as the maximum burst length to avoid this issue, since
the maximum burst length will not be a big value which is more than 0xffff.
Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d626a97 ]

The 2-stage destination channel will be triggered by source channel
automatically, which means we should not trigger it by software request.
Signed-off-by: Eric Long <eric.long@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 58152b0e ]

When user terminates one DMA channel to free all its descriptors, but
at the same time one transaction interrupt was triggered possibly, now
we should not handle this interrupt by validating if the 'schan->cur_desc'
was set as NULL to avoid crashing the kernel.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 16d0f85e ]

We will get a NULL virtual descriptor by vchan_find_desc() when the descriptor
has been submitted, that will crash the kernel when getting the descriptor
status.

In this case, since the descriptor has been submitted to process, but it
is not completed now, which means the descriptor is listed into the
'vc->desc_submitted' list now. So we can not get current processing descriptor
by vchan_find_desc(), but the pointer 'schan->cur_desc' will point to the
current processing descriptor, then we can use 'schan->cur_desc' to get
current processing descriptor's status to avoid this issue.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 069b3c42 ]

The mtk_cqdma_poll_engine_done() function takes a true/false parameter
where true means it's called from atomic context.  There are a couple
places where it was set to false but it's actually in atomic context
so it should be true.

All the callers for mtk_cqdma_hard_reset() are holding a spin_lock and
in mtk_cqdma_free_chan_resources() we take a spin_lock before calling
the mtk_cqdma_poll_engine_done() function.

Fixes: b1f01e48 ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0788611c ]

In the unlikely event that axi_desc_get returns a null desc in the
very first iteration of the while-loop the error exit path ends
up calling axi_desc_put on a null pointer 'first' and this causes
a null pointer dereference.  Fix this by adding a null check on
pointer 'first' before calling axi_desc_put.

Addresses-Coverity: ("Explicit null dereference")
Fixes: 1fe20f1b ("dmaengine: Introduce DW AXI DMAC driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4e4106f5 ]

When a multi-descriptor DMA transfer is in progress, the "IRQ pending"
flag will apparently be set for that channel as soon as the last
descriptor loads, way before the IRQ actually happens. This behaviour
has been observed on the JZ4725B, but maybe other SoCs are affected.

In the case where another DMA transfer is running into completion on a
separate channel, the IRQ handler would then run the completion handler
for our previous channel even if the transfer didn't actually finish.

Fix this by checking in the completion handler that we're indeed done;
if not the interrupted DMA transfer will simply be resumed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 89c92142 ]

| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla]
| arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2bf8496f ]

The prior implementation of the KERNEL_DS fault checking would work on
any unmapped kernel address, but this was narrowed to the non-canonical
range instead. This adjusts the LKDTM test to match.

Fixes: 00c42373 ("x86-64: add warning for non-canonical user access address dereferences")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 65dade60 upstream.

When Broadcom SDIO cards are idled they go to sleep and a whole
separate subsystem takes over their SDIO communication.  This is the
Always-On-Subsystem (AOS) and it can't handle tuning requests.

Specifically, as tested on rk3288-veyron-minnie (which reports having
BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control()
when "on = 1" (aka we're transition from sleep to wake) by whacking:
  bus->sdiodev->func1->card->host->need_retune = 1
...then I can often see tuning fail.  In this case dw_mmc reports "All
phases bad!").  Note that I don't get 100% failure, presumably because
sometimes the card itself has already transitioned away from the AOS
itself by the time we try to wake it up.  If I force retuning when "on
= 0" (AKA force retuning right before sending the command to go to
sleep) then retuning is always OK.

NOTE: we need _both_ this patch and the patch to avoid triggering
tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac:
sdio: Disable auto-tuning around commands expected to fail").  Though
both patches handle issues with Broadcom's AOS, the problems are
distinct:
1. We want to defer (but not ignore) asynchronous (like
   timer-requested) tuning requests till the card is awake.  However,
   we want to ignore CRC errors during the transition, we don't want
   to queue deferred tuning request.
2. You could imagine that the AOS could implement retuning but we
   could still get errors while transitioning in and out of the AOS.
   Similarly you could imagine a seamless transition into and out of
   the AOS (with no CRC errors) even if the AOS couldn't handle
   tuning.

ALSO NOTE: presumably there is never a desperate need to retune in
order to wake up the card, since doing so is impossible.  Luckily the
only way the card can get into sleep state is if we had a good enough
tuning to send it the command to put it into sleep, so presumably that
"good enough" tuning is enough to wake us up, at least with a few
retries.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2de0b42d upstream.

There are certain cases, notably when transitioning between sleep and
active state, when Broadcom SDIO WiFi cards will produce errors on the
SDIO bus.  This is evident from the source code where you can see that
we try commands in a loop until we either get success or we've tried
too many times.  The comment in the code reinforces this by saying
"just one write attempt may fail"

Unfortunately these failures sometimes end up causing an "-EILSEQ"
back to the core which triggers a retuning of the SDIO card and that
blocks all traffic to the card until it's done.

Let's disable retuning around the commands we expect might fail.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit abdd5dcc upstream.

This reverts commit 29f65891.

After that patch landed I find that my kernel log on
rk3288-veyron-minnie and rk3288-veyron-speedy is filled with:
brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110

This seems to happen every time the Broadcom WiFi transitions out of
sleep mode.  Reverting the commit fixes the problem for me, so that's
what this patch does.

Note that, in general, the justification in the original commit seemed
a little weak.  It looked like someone was testing on a SD card
controller that would sometimes die if there were CRC errors on the
bus.  This used to happen back in early days of dw_mmc (the controller
on my boards), but we fixed it.  Disabling a feature on all boards
just because one SD card controller is broken seems bad.

Fixes: 29f65891 ("brcmfmac: disable command decode in sdio_aos")
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Double Lo <double.lo@cypress.com>
Cc: Madhan Mohan R <madhanmohan.r@cypress.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 156e4299 upstream.

Each function that manipulates the aa_ext struct should reset it's "pos"
member on failure. This ensures that, on failure, no changes are made to
the state of the aa_ext struct.

There are paths were elements are optional and the error path is
used to indicate the optional element is not present. This means
instead of just aborting on error the unpack stream can become
unsynchronized on optional elements, if using one of the affected
functions.

Cc: stable@vger.kernel.org
Fixes: 736ec752 ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8404d7a6 upstream.

A packed AppArmor policy contains null-terminated tag strings that are read
by unpack_nameX(). However, unpack_nameX() uses string functions on them
without ensuring that they are actually null-terminated, potentially
leading to out-of-bounds accesses.

Make sure that the tag string is null-terminated before passing it to
strcmp().

Cc: stable@vger.kernel.org
Fixes: 736ec752 ("AppArmor: policy routines for loading and unpacking policy")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23375b13 upstream.

While commit 11c236b8 ("apparmor: add a default null dfa") ensure
every profile has a policy.dfa it does not resize the policy.start[]
to have entries for every possible start value. Which means
PROFILE_MEDIATES is not safe to use on untrusted input. Unforunately
commit b9590ad4 ("apparmor: remove POLICY_MEDIATES_SAFE") did not
take into account the start value usage.

The input string in profile_query_cb() is user controlled and is not
properly checked to be within the limited start[] entries, even worse
it can't be as userspace policy is allowed to make us of entries types
the kernel does not know about. This mean usespace can currently cause
the kernel to access memory up to 240 entries beyond the start array
bounds.

Cc: stable@vger.kernel.org
Fixes: b9590ad4 ("apparmor: remove POLICY_MEDIATES_SAFE")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0e658060 upstream.

On Chuwi Hi10 Plus, the Silead device id is MSSL0017.
Signed-off-by: Daniel Smith <danct12@disroot.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c7da40d upstream.

In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and
UI_END_FF_UPLOAD need to be adjusted before being passed on
uinput_ioctl_handler() since code built with -m32 will be passing
slightly different values. Extend the code already covering
UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well.
Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9843f3e0 upstream.

They are capable of using intertouch and it works well with
psmouse.synaptics_intertouch=1, so add them to the list.

Without it, scrolling and gestures are jumpy, three-finger pinch gesture
doesn't work and three- or four-finger swipes sometimes get stuck.
Signed-off-by: Alexander Mikhaylenko <exalm7659@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 389fc70b upstream.

Register EE_VERSION contains mixture of calibration information and DSP
version. So far, because calibrations were definite, the driver
compatibility depended on whole contents, but in the newer production
process the calibration part changes. Because of that, value in EE_VERSION
will be changed and to avoid that calibration value is same as DSP version
the MSB in calibration part was fixed to 1.
That means existing calibrations (medical and consumer) will now have
hex values (bits 8 to 15) of 83 and 84 respectively. Driver compatibility
should be based only on DSP version part of the EE_VERSION (bits 0 to 7)
register.
Signed-off-by: Crt Mori <cmo@melexis.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bce0d57d upstream.

Properly suspend/resume i2c slaves connected to st_lsm6dsx master
controller if the CPU goes in suspended state

Fixes: c91c1c84 ("imu: st_lsm6dsx: add i2c embedded controller support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3230f4a8 upstream.

The following warning can happen when a memory shortage
occurs during txreq allocation:

[10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
[10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
[10220.939247]   cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0
[10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1]
[10220.939261]   node 0: slabs: 1026568, objs: 43115856, free: 0
[10220.939262] Call Trace:
[10220.939262]   node 1: slabs: 820872, objs: 34476624, free: 0
[10220.939263]  dump_stack+0x5a/0x73
[10220.939265]  warn_alloc+0x103/0x190
[10220.939267]  ? wake_all_kswapds+0x54/0x8b
[10220.939268]  __alloc_pages_slowpath+0x86c/0xa2e
[10220.939270]  ? __alloc_pages_nodemask+0x2fe/0x320
[10220.939271]  __alloc_pages_nodemask+0x2fe/0x320
[10220.939273]  new_slab+0x475/0x550
[10220.939275]  ___slab_alloc+0x36c/0x520
[10220.939287]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939299]  ? __get_txreq+0x54/0x160 [hfi1]
[10220.939310]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939312]  __slab_alloc+0x40/0x61
[10220.939323]  ? hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939325]  kmem_cache_alloc+0x181/0x1b0
[10220.939336]  hfi1_make_rc_req+0x90/0x18b0 [hfi1]
[10220.939348]  ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1]
[10220.939359]  ? find_prev_entry+0xb0/0xb0 [hfi1]
[10220.939371]  hfi1_do_send+0x1d9/0x3f0 [hfi1]
[10220.939372]  process_one_work+0x171/0x380
[10220.939374]  worker_thread+0x49/0x3f0
[10220.939375]  kthread+0xf8/0x130
[10220.939377]  ? max_active_store+0x80/0x80
[10220.939378]  ? kthread_bind+0x10/0x10
[10220.939379]  ret_from_fork+0x35/0x40
[10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)

The shortage is handled properly so the message isn't needed. Silence by
adding the no warn option to the slab allocation.

Fixes: 45842abb ("staging/rdma/hfi1: move txreq header code")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cc78076a upstream.

The qp priv rcd pointer doesn't match the context being used for verbs
causing issues when 9B and kdeth packets are processed by different
receive contexts and hence different CPUs.

When running on different CPUs the following panic can occur:

 WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
 list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230
 CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P           OE  ------------   3.10.0-862.2.3.el7_lustre.x86_64 #1
 Call Trace:
  <IRQ>  [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b
  [<ffffffffb74916d8>] __warn+0xd8/0x100
  [<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffffb7768671>] __list_del_entry+0xa1/0xd0
  [<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1]
  [<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1]
  [<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1]
  [<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0
  [<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80
  [<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60
  [<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150
  [<ffffffffb742d504>] handle_irq+0xe4/0x1a0
  [<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0
  [<ffffffffb7b16362>] common_interrupt+0x162/0x162
  <EOI>  [<ffffffffb775a326>] ? memcpy+0x6/0x110
  [<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs]
  [<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs]
  [<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs]
  [<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs]
  [<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs]
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f
  [<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs]
  [<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl]
  [<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl]
  [<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs]
  [<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl]
  [<ffffffffb74cee80>] ? wake_up_state+0x20/0x20
  [<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs]
  [<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl]
  [<ffffffffb74bae31>] kthread+0xd1/0xe0
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40
  [<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21
  [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40

Fix by reading the map entry in the same manner as the hardware so that
the kdeth and verbs contexts match.

Cc: <stable@vger.kernel.org>
Fixes: 5190f052 ("IB/hfi1: Allow the driver to initialize QP priv struct")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit cf131a81 upstream.

Heavy contention of the sde flushlist_lock can cause hard lockups at
extreme scale when the flushing logic is under stress.

Mitigate by replacing the item at a time copy to the local list with
an O(1) list_splice_init() and using the high priority work queue to
do the flushes.

Fixes: 77241056 ("IB/hfi1: add driver files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da9de5f8 upstream.

The call to sdma_progress() is called outside the wait lock.

In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle.  If that happens, there will be no
more sdma interrupts to cause the wakeup and the user_sdma xmit will hang.

Fix by moving the lock to enclose the sdma_progress() call.

Also, delete busycount. The need for this was removed by:
commit bcad2913 ("IB/hfi1: Serve the most starved iowait entry first")

Cc: <stable@vger.kernel.org>
Fixes: 77241056 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5f90677e upstream.

The opcode range for fault injection from user should be validated before
it is applied to the fault->opcodes[] bitmap to avoid out-of-bound
error.

Cc: <stable@vger.kernel.org>
Fixes: a74d5307 ("IB/hfi1: Rework fault injection machinery")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 61cabc7b upstream.

We can not hold the GlobalMid_Lock spinlock during the
dfs processing in cifs_reconnect since it invokes things that may sleep
and thus trigger :

BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23

Thus we need to drop the spinlock during this code block.

RHBZ: 1716743

Cc: stable@vger.kernel.org
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 487317c9 upstream.

We can not depend on the tcon->open_file_lock here since in multiuser mode
we may have the same file/inode open via multiple different tcons.

The current code is race prone and will crash if one user deletes a file
at the same time a different user opens/create the file.

To avoid this we need to have a spinlock attached to the inode and not the tcon.

RHBZ:  1580165

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b8c3b718 upstream.

A USB3 device needs to be reset and re-enumarated if the port it
connects to goes to a error state, with link state inactive.

There is no use in trying to recover failed transactions by resetting
endpoints at this stage. Tests show that in rare cases, after multiple
endpoint resets of a roothub port the whole host controller might stop
completely.

Several retries to recover from transaction error can happen as
it can take a long time before the hub thread discovers the USB3
port error and inactive link.

We can't reliably detect the port error from slot or endpoint context
due to a limitation in xhci, see xhci specs section 4.8.3:
"There are several cases where the EP State field in the Output
Endpoint Context may not reflect the current state of an endpoint"
and
"Software should maintain an accurate value for EP State, by tracking it
with an internal variable that is driven by Events and Doorbell accesses"

Same appears to be true for slot state.

set a flag to the corresponding slot if a USB3 roothub port link goes
inactive to prevent both queueing new URBs and resetting endpoints.
Reported-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Tested-by: Rapolu Chiranjeevi <chiranjeevi.rapolu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddd57980 upstream.

USB 3.2 capability in a host can be detected from the
xHCI Supported Protocol Capability major and minor revision fields.

If major is 0x3 and minor 0x20 then the host is USB 3.2 capable.

For USB 3.2 capable hosts set the root hub lane count to 2.

The Major Revision and Minor Revision fields contain a BCD version number.
The value of the Major Revision field is JJh and the value of the Minor
Revision field is MNh for version JJ.M.N, where JJ = major revision number,
M - minor version number, N = sub-minor version number,
e.g. version 3.1 is represented with a value of 0310h.

Also fix the extra whitespace printed out when announcing regular
SuperSpeed hosts.

Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c19dffc0 upstream.

An endpoint conflict occurs when the USB is working in device mode
during an isochronous communication. When the endpointA IN direction
is an isochronous IN endpoint, and the host sends an IN token to
endpointA on another device, then the OUT transaction may be missed
regardless the OUT endpoint number. Generally, this occurs when the
device is connected to the host through a hub and other devices are
connected to the same hub.

The affected OUT endpoint can be either control, bulk, isochronous, or
an interrupt endpoint. After the OUT endpoint is primed, if an IN token
to the same endpoint number on another device is received, then the OUT
endpoint may be unprimed (cannot be detected by software), which causes
this endpoint to no longer respond to the host OUT token, and thus, no
corresponding interrupt occurs.

There is no good workaround for this issue, the only thing the software
could do is numbering isochronous IN from the highest endpoint since we
have observed most of device number endpoint from the lowest.

Cc: <stable@vger.kernel.org> #v3.14+
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 24e2e7a1 upstream.

UFS runtime suspend can be triggered after pm_runtime_enable() is invoked
in ufshcd_pltfrm_init(). However if the first runtime suspend is triggered
before binding ufs_hba structure to ufs device structure via
platform_set_drvdata(), then UFS runtime suspend will be no longer
triggered in the future because its dev->power.runtime_error was set in the
first triggering and does not have any chance to be cleared.

To be more clear, dev->power.runtime_error is set if hba is NULL in
ufshcd_runtime_suspend() which returns -EINVAL to rpm_callback() where
dev->power.runtime_error is set as -EINVAL. In this case, any future
rpm_suspend() for UFS device fails because rpm_check_suspend_allowed()
fails due to non-zero
dev->power.runtime_error.

To resolve this issue, make sure the first UFS runtime suspend get valid
"hba" in ufshcd_runtime_suspend(): Enable UFS runtime PM only after hba is
successfully bound to UFS device structure.

Fixes: 62694735 ([SCSI] ufs: Add runtime PM support for UFS host controller driver)
Cc: stable@vger.kernel.org
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83293386 upstream.

Processing of SDIO IRQs must obviously be prevented while the card is
system suspended, otherwise we may end up trying to communicate with an
uninitialized SDIO card.

Reports throughout the years shows that this is not only a theoretical
problem, but a real issue. So, let's finally fix this problem, by keeping
track of the state for the card and bail out before processing the SDIO
IRQ, in case the card is suspended.

Cc: stable@vger.kernel.org
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b4c9f938 upstream.

We want SDIO drivers to be able to temporarily stop retuning when the
driver knows that the SDIO card is not in a state where retuning will
work (maybe because the card is asleep).  We'll move the relevant
functions to a place where drivers can call them.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0a55f4ab upstream.

Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card.  This is
generally a good idea.

However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning.  This
re-tuning will be a needless waste of time.  One example case where a
transfer is expected to cause errors is when transitioning between
idle (sometimes referred to as "sleep" in Broadcom code) and active
state on certain Broadcom WiFi SDIO cards.  Specifically if the card
was already transitioning between states when the command was sent it
could cause an error on the SDIO bus.

Let's add an API that the SDIO function drivers can call that will
temporarily disable the auto-tuning functionality.  Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.

NOTE: this makes the assumption that the card is already tuned well
enough that it's OK to disable the auto-retuning during one of these
error-prone situations.  Presumably the driver code performing the
error-prone transfer knows how to recover / retry from errors.  ...and
after we can get back to a state where transfers are no longer
error-prone then we can enable the auto-retuning again.  If we truly
find ourselves in a case where the card needs to be retuned sometimes
to handle one of these error-prone transfers then we can always try a
few transfers first without auto-retuning and then re-try with
auto-retuning if the first few fail.

Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
  dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 20314ce3 upstream.

If cmd19 timeout or response crcerr occurs during execute_tuning(),
it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected.
Signed-off-by: jjian zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e9 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8a5df8ac upstream.

SDIO IRQ is triggered by low level. It need disable SDIO IRQ
detected function. Otherwise the interrupt register can't be cleared.
It will process the interrupt more.
Signed-off-by: Jjian Zhou <jjian.zhou@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Fixes: 5215b2e9 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 97bf85b6 upstream.

Our HW engineers informed us that HS400 is not working on these SoC
revisions.

Fixes: 0f4e2054 ("mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>