- 22 Oct, 2015 40 commits
-
-
Ard Biesheuvel authored
commit 0ce3cc00 upstream. The new Properties Table feature introduced in UEFIv2.5 may split memory regions that cover PE/COFF memory images into separate code and data regions. Since these regions only differ in the type (runtime code vs runtime data) and the permission bits, but not in the memory type attributes (UC/WC/WT/WB), the spec does not require them to be aligned to 64 KB. Since the relative offset of PE/COFF .text and .data segments cannot be changed on the fly, this means that we can no longer pad out those regions to be mappable using 64 KB pages. Unfortunately, there is no annotation in the UEFI memory map that identifies data regions that were split off from a code region, so we must apply this logic to all adjacent runtime regions whose attributes only differ in the permission bits. So instead of rounding each memory region to 64 KB alignment at both ends, only round down regions that are not directly preceded by another runtime region with the same type attributes. Since the UEFI spec does not mandate that the memory map be sorted, this means we also need to sort it first. Note that this change will result in all EFI_MEMORY_RUNTIME regions whose start addresses are not aligned to the OS page size to be mapped with executable permissions (i.e., on kernels compiled with 64 KB pages). However, since these mappings are only active during the time that UEFI Runtime Services are being invoked, the window for abuse is rather small. Tested-by:
Mark Salter <msalter@redhat.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [UEFI 2.4 only] Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443218539-7610-3-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit 397d425d upstream. In rare cases a directory can be renamed out from under a bind mount. In those cases without special handling it becomes possible to walk up the directory tree to the root dentry of the filesystem and down from the root dentry to every other file or directory on the filesystem. Like division by zero .. from an unconnected path can not be given a useful semantic as there is no predicting at which path component the code will realize it is unconnected. We certainly can not match the current behavior as the current behavior is a security hole. Therefore when encounting .. when following an unconnected path return -ENOENT. - Add a function path_connected to verify path->dentry is reachable from path->mnt.mnt_root. AKA to validate that rename did not do something nasty to the bind mount. To avoid races path_connected must be called after following a path component to it's next path component. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric W. Biederman authored
commit cde93be4 upstream. A rename can result in a dentry that by walking up d_parent will never reach it's mnt_root. For lack of a better term I call this an escaped path. prepend_path is called by four different functions __d_path, d_absolute_path, d_path, and getcwd. __d_path only wants to see paths are connected to the root it passes in. So __d_path needs prepend_path to return an error. d_absolute_path similarly wants to see paths that are connected to some root. Escaped paths are not connected to any mnt_root so d_absolute_path needs prepend_path to return an error greater than 1. So escaped paths will be treated like paths on lazily unmounted mounts. getcwd needs to prepend "(unreachable)" so getcwd also needs prepend_path to return an error. d_path is the interesting hold out. d_path just wants to print something, and does not care about the weird cases. Which raises the question what should be printed? Given that <escaped_path>/<anything> should result in -ENOENT I believe it is desirable for escaped paths to be printed as empty paths. As there are not really any meaninful path components when considered from the perspective of a mount tree. So tweak prepend_path to return an empty path with an new error code of 3 when it encounters an escaped path. Signed-off-by:
-
Ulf Hansson authored
commit 43934ece upstream. When CONFIG_GPIOLIB is unset, its stubs will return -ENOSYS. That means when the mmc core parses DT for CD/WP GPIOs via mmc_of_parse(), -ENOSYS becomes propagated to the caller. Typically this means that the mmc host driver fails to probe. As the CD/WP GPIOs are already treated as optional, let's extend that to cover the case when CONFIG_GPIOLIB is unset. Reported-by:
Michal Simek <michal.simek@xilinx.com> Fixes: 16b23787 ("mmc: sdhci-of-arasan: Call OF parsing for MMC") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Venu Byravarasu <vbyravarasu@nvidia.com> Signed-off-by:
-
Haibo Chen authored
commit d31911b9 upstream. Currently one mrq->data maybe execute dma_map_sg() twice when mmc subsystem prepare over one new request, and the following log show up: sdhci[sdhci_pre_dma_transfer] invalid cookie: 24, next-cookie 25 In this condition, mrq->date map a dma-memory(1) in sdhci_pre_req for the first time, and map another dma-memory(2) in sdhci_prepare_data for the second time. But driver only unmap the dma-memory(2), and dma-memory(1) never unmapped, which cause the dma memory leak issue. This patch use another method to map the dma memory for the mrq->data which can fix this dma memory leak issue. Fixes: 348487cb ("mmc: sdhci: use pipeline mmc requests to improve performance") Reported-and-tested-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Haibo Chen <haibo.chen@freescale.com> Signed-off-by:
-
shengyong authored
commit 7c7feb2e upstream. UBI: attaching mtd1 to ubi0 UBI: scanning is finished UBI error: init_volumes: not enough PEBs, required 706, available 686 UBI error: ubi_wl_init: no enough physical eraseblocks (-20, need 1) UBI error: ubi_attach_mtd_dev: failed to attach mtd1, error -12 <= NOT ENOMEM UBI error: ubi_init: cannot attach mtd1 If available PEBs are not enough when initializing volumes, return -ENOSPC directly. If available PEBs are not enough when initializing WL, return -ENOSPC instead of -ENOMEM. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
David Gstir <david@sigma-star.at> Signed-off-by:
-
Richard Weinberger authored
commit 281fda27 upstream. Make sure that data_size is less than LEB size. Otherwise a handcrafted UBI image is able to trigger an out of bounds memory access in ubi_compare_lebs(). Signed-off-by:
-
Richard Weinberger authored
commit cf6f54e3 upstream. Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Reported-and-tested-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
commit 83fccfc3 upstream. When replacing del_timer() with del_timer_sync(), I introduced a deadlock condition : reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop() inet_csk_reqsk_queue_drop() can be called from many contexts, one being the timer handler itself (reqsk_timer_handler()). In this case, del_timer_sync() loops forever. Simple fix is to test if timer is pending. Fixes: 2235f2ac ("inet: fix races with reqsk timers") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Cc: Andre Tomt <andre@tomt.net> Cc: Chris Caputo <ccaputo@alt.net> Signed-off-by:
-
Christian Engelmayer authored
commit a8b97745 upstream. Commit 5d5cd85f ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") also added a check on the allocation of DMA-accessible memory that may directly return. In that case the already allocated firmware data is leaked. Make sure the data is always freed correctly. Detected by Coverity CID 1316519. Fixes: 5d5cd85f ("rsi: Fix failure to load firmware after memory leak fix and fix the leak") Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Paul Mackerras authored
commit e297c939 upstream. This fixes a race which can result in the same virtual IRQ number being assigned to two different MSI interrupts. The most visible consequence of that is usually a warning and stack trace from the sysfs code about an attempt to create a duplicate entry in sysfs. The race happens when one CPU (say CPU 0) is disposing of an MSI while another CPU (say CPU 1) is setting up an MSI. CPU 0 calls (for example) pnv_teardown_msi_irqs(), which calls msi_bitmap_free_hwirqs() to indicate that the MSI (i.e. its hardware IRQ number) is no longer in use. Then, before CPU 0 gets to calling irq_dispose_mapping() to free up the virtal IRQ number, CPU 1 comes in and calls msi_bitmap_alloc_hwirqs() to allocate an MSI, and gets the same hardware IRQ number that CPU 0 just freed. CPU 1 then calls irq_create_mapping() to get a virtual IRQ number, which sees that there is currently a mapping for that hardware IRQ number and returns the corresponding virtual IRQ number (which is the same virtual IRQ number that CPU 0 was using). CPU 0 then calls irq_dispose_mapping() and frees that virtual IRQ number. Now, if another CPU comes along and calls irq_create_mapping(), it is likely to get the virtual IRQ number that was just freed, resulting in the same virtual IRQ number apparently being used for two different hardware interrupts. To fix this race, we just move the call to msi_bitmap_free_hwirqs() to after the call to irq_dispose_mapping(). Since virq_to_hw() doesn't work for the virtual IRQ number after irq_dispose_mapping() has been called, we need to call it before irq_dispose_mapping() and remember the result for the msi_bitmap_free_hwirqs() call. The pattern of calling msi_bitmap_free_hwirqs() before irq_dispose_mapping() appears in 5 places under arch/powerpc, and appears to have originated in commit 05af7bd2 ("[POWERPC] MPIC U3/U4 MSI backend") from 2007. Fixes: 05af7bd2 ("[POWERPC] MPIC U3/U4 MSI backend") Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Kapileshwar Singh authored
commit c2e4b24f upstream. When a trace recorded on a 32-bit device is processed with a 64-bit binary, the higher 32-bits of the address need to ignored. The lack of this results in the output of the 64-bit pointer value to the trace as the 32-bit address lookup fails in find_printk(). Before: burn-1778 [003] 548.600305: bputs: 0xc0046db2s: 2cec5c058d98c After: burn-1778 [003] 548.600305: bputs: 0xc0046db2s: RT throttling activated The problem occurs in PRINT_FIELD when the field is recognized as a pointer to a string (of the type const char *) Heterogeneous architectures cases below can arise and should be handled: * Traces recorded using 32-bit addresses processed on a 64-bit machine * Traces recorded using 64-bit addresses processed on a 32-bit machine Reported-by:
Juri Lelli <juri.lelli@arm.com> Signed-off-by:
Kapileshwar Singh <kapileshwar.singh@arm.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Javi Merino <javi.merino@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1442928123-13824-1-git-send-email-kapileshwar.singh@arm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Linus Lüssing authored
commit 53cf037b upstream. The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Linus Lüssing authored
commit 8a4023c5 upstream. So far the mcast tvlv handler did not anticipate the processing of multiple incoming OGMs from the same originator at the same time. This can lead to various issues: * Broken refcounting: For instance two mcast handlers might both assume that an originator just got multicast capabilities and will together wrongly decrease mcast.num_disabled by two, potentially leading to an integer underflow. * Potential kernel panic on hlist_del_rcu(): Two mcast handlers might one after another try to do an hlist_del_rcu(&orig->mcast_want_all_*_node). The second one will cause memory corruption / crashes. (Reported by: Sven Eckelmann <sven@narfation.org>) Right in the beginning the code path makes assumptions about the current multicast related state of an originator and bases all updates on that. The easiest and least error prune way to fix the issues in this case is to serialize multiple mcast handler invocations with a spinlock. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
Linus Lüssing authored
commit 9c936e3f upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
Linus Lüssing authored
commit ac4eebd4 upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: e17931d1 ("batman-adv: introduce capability initialization bitfield") Signed-off-by:
-
Linus Lüssing authored
commit 4635469f upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 3f4841ff ("batman-adv: tvlv - add network coding container") Signed-off-by:
-
James Hogan authored
commit 53960059 upstream. If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Fixes: a2e715a8 ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9610/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Viresh Kumar authored
commit a2022001 upstream. Tolerance applies on both sides of the target voltage, i.e. both min and max sides. But while checking if a voltage is supported by the regulator or not, we haven't taken care of tolerance on the lower side. Fix that. Cc: Lucas Stach <l.stach@pengutronix.de> Fixes: 045ee45c ("cpufreq: cpufreq-dt: disable unsupported OPPs") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Borislav Petkov authored
commit 2110d70c upstream. Philip Müller reported a hang when booting 32-bit 4.1 kernel on an AMD box. A fragment of the splat was enough to pinpoint the issue: task: f58e0000 ti: f58e8000 task.ti: f58e800 EIP: 0060:[<c135a903>] EFLAGS: 00010206 CPU: 0 EIP is at free_cache_attributes+0x83/0xd0 EAX: 00000001 EBX: f589d46c ECX: 00000090 EDX: 360c2000 ESI: 00000000 EDI: c1724a80 EBP: f58e9ec0 ESP: f58e9ea0 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 000000ac CR3: 01731000 CR4: 000006d0 cache_shared_cpu_map_setup() did check sibling CPUs cacheinfo descriptor while the respective teardown path cache_shared_cpu_map_remove() didn't. Fix that. >From tglx's version: to be on the safe side, move the cacheinfo descriptor check to free_cache_attributes(), thus cleaning up the hotplug path a little and making this even more robust. Reported-and-tested-by:
Philip Müller <philm@manjaro.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: manjaro-dev@manjaro.org Cc: Philip Müller <philm@manjaro.org> Link: https://lkml.kernel.org/r/55B47BB8.6080202@manjaro.orgSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Yao-Wen Mao authored
commit 8484bf29 upstream. These two headphones need a reset-resume quirk to properly resume to original volume level. Signed-off-by:
Yao-Wen Mao <yaowen@google.com> Signed-off-by:
-
Vincent Palatin authored
commit 72194739 upstream. Add a device quirk for the Logitech PTZ Pro Camera and its sibling the ConferenceCam CC3000e Camera. This fixes the failed camera enumeration on some boot, particularly on machines with fast CPU. Tested by connecting a Logitech PTZ Pro Camera to a machine with a Haswell Core i7-4600U CPU @ 2.10GHz, and doing thousands of reboot cycles while recording the kernel logs and taking camera picture after each boot. Before the patch, more than 7% of the boots show some enumeration transfer failures and in a few of them, the kernel is giving up before actually enumerating the webcam. After the patch, the enumeration has been correct on every reboot. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Signed-off-by:
-
Alexander Inyukhin authored
commit 1d5c47f5 upstream. Rng reads in chaoskey driver could return the same data under the certain conditions. Signed-off-by:
Alexander Inyukhin <shurick@sectorb.msk.ru> Signed-off-by:
-
Felipe Balbi authored
commit b0a688dd upstream. since commit 33c300cb ("usb: musb: dsps: don't fake of_node to musb core") we have been preventing CPPI 4.1 from probing due to NULL of_node. We can't revert said commit otherwise a different regression would show up, so the fix is to look for the parent device's (glue layer's) of_node instead, since that's the thing which is actually described in DTS. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Roger Quadros authored
commit 762982db upstream. The gpio-desc migration done in v4.0 caused a regression with legacy boots due to reversed reset logic. e.g. omap3-beagle USB host breaks on legacy boot. Request the reset GPIO with GPIOF_ACTIVE_LOW flag so that it matches the driver logic and pin behaviour. Fixes: e9f2cefb ("usb: phy: generic: migrate to gpio_desc") Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Mathias Nyman authored
commit ff30cbc8 upstream. Bits 1:0 of the bmAttributes are used for the burst multiplier. The rest of the bits used to be reserved (zero), but USB3.1 takes bit 7 into use. Use the existing USB_SS_MULT() macro instead to make sure the mult value and hence max packet calculations are correct for USB3.1 devices. Note that burst multiplier in bmAttributes is zero based and that the USB_SS_MULT() macro adds one. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Peter Chen authored
commit 56ffa1d1 upstream. According to spec, there are functional and protocol stalls. For functional stall, it is for bulk and interrupt endpoints, below are cases for it: - Host sends SET_FEATURE request for Set-Halt, the udc driver needs to set stall, and return true unconditionally. - The gadget driver may call usb_ep_set_halt to stall certain endpoints, if there is a transfer in pending, the udc driver should not set stall, and return -EAGAIN accordingly. These two kinds of stall need to be cleared by host using CLEAR_FEATURE request (Clear-Halt). For protocol stall, it is for control endpoint, this stall will be set if the control request has failed. This stall will be cleared by next setup request (hardware will do it). It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt" test failure, meanwhile, this change has been verified by USB2 CV Compliance Test and MSC Tests. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Bin Liu authored
commit b8239dcc upstream. Fix the regression caused by commit ad78c918 ("usb: musb: dsps: just start polling already") which causes polling the ID pin status even in device-only mode. Fixes: ad78c918 ("usb: musb: dsps: just start polling already") Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Jann Horn authored
commit b7f76ea2 upstream. Signed-off-by:
Jann Horn <jann@thejh.net> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mark Brown authored
commit 176fc2d5 upstream. The in kernel snprintf() will conveniently return the actual length of the printed string even if not given an output beffer at all so just do that rather than relying on the user to pass in a suitable buffer, ensuring that we don't need to worry if the buffer was truncated due to the size of the buffer passed in. Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
commit b763ec17 upstream. If a read is attempted which is smaller than the line length then we may underflow the subtraction we're doing with the unsigned size_t type so move some of the calculation to be additions on the right hand side instead in order to avoid this. Reported-by:
-
Gabriel Krisman Bertazi authored
commit e35d7f27 upstream. Remove unnecessary check that disabled SIS pipe commands for SIS-32 devices. This change was sufficient to enable raw mode and send SIS pipe commands for a 57B3 device. Fixes: f8ee25d7 ("ipr: AF DASD raw mode implementation in ipr driver") Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Reviewed-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Russell King authored
commit 72010aca upstream. Fix the lack of clk_put() in sa11xx_base.c's error cleanup paths by converting the driver to the devm_* API. Fixes: 86d88bfc ("ARM: 8247/2: pcmcia: sa1100: make use of device clock") Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Michal Kazior authored
commit 92092fe5 upstream. Even though there's a WMI enum for fragmentation threshold no known firmware actually implements it. Moreover it is not possible to rely frame fragmentation to mac80211 because firmware clears the "more fragments" bit in frame control making it impossible for remote devices to reassemble frames. Hence implement a dummy callback just to say fragmentation isn't supported. This effectively prevents mac80211 from doing frame fragmentation in software. This fixes Tx becoming broken after setting fragmentation threshold. Fixes: 1010ba4c ("ath10k: unregister and remove frag_threshold callback") Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Andy Shevchenko authored
commit ecc87eed upstream. In device_add_property_set() we check pset parameter for a NULL, but few lines later we do a pointer arithmetic without check that will crash kernel in the set_secondary_fwnode(). Here we check if pset parameter is NULL and return immediately. Fixes: 16ba08d5 (device property: Introduce firmware node type for platform data) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Heiko Stuebner authored
commit 28c1f162 upstream. The rockchip io-domain driver currently only depends on ARCH_ROCKCHIP itself. This makes it possible to select the power-domain driver, but not the POWER_AVS class and results in the iodomain-driver not getting build in this case. So add the additional dependency, which also results in the driver config option now being placed nicely into the AVS submenu. Fixes: 662a9586 ("PM / AVS: rockchip-io: add driver handling Rockchip io domains") Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Boris BREZILLON authored
commit 03a0e8a7 upstream. The USER_DATA register cannot be accessed using byte accessors on A13 SoCs, thus triggering a bug when using memcpy_toio on this register. Declare an helper macros to convert an OOB buffer into a suitable USER_DATA value and vice-versa. This patch also fixes an error in the oob_required logic (some OOB data are not written even if the user required it) by removing the oob_required condition, which is perfectly valid since the core already fill ->oob_poi with FFs when oob_required is false. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Boris BREZILLON authored
commit 8e375ccd upstream. The sunxi_nand_chips_cleanup() function is missing a call to list_del() which generates a double free error. Reported-by:
Priit Laes <plaes@plaes.org> Signed-off-by:
-
Antoine Ténart authored
commit bc3e00f0 upstream. When keeping the configuration set by the bootloader (by using the marvell,nand-keep-config property), the pxa3xx_nand_detect_config() function is called and set the chunk size to 512 as a default value if NDCR_PAGE_SZ is not set. In the other case, when not keeping the bootloader configuration, no chunk size is set. Fix this by adding a default chunk size of 512. Fixes: 70ed8523 ("mtd: nand: pxa3xx: Introduce multiple page I/O support") Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free> Signed-off-by:
-
Mario Carrillo authored
commit e4144fe5 upstream. The HOWTO document needed updating for the new kernel versioning. Signed-off-by:
Mario Carrillo <mario.alfredo.c.arevalo@intel.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
