- 18 Sep, 2022 1 commit
-
-
Rebecca Mckeever authored
Add function setup_numa_memblock() for setting up a memory layout with multiple NUMA nodes in a previously allocated dummy physical memory. This function can be used in place of setup_memblock() in tests that need to simulate a NUMA system. setup_numa_memblock(): - allows for setting up a memory layout by specifying the fraction of MEM_SIZE in each node Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to 16 NUMA nodes. Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Rebecca Mckeever <remckee0@gmail.com> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
-
- 04 Sep, 2022 2 commits
-
-
Rebecca Mckeever authored
Move variable declarations to a single block at the beginning of each testing function. Signed-off-by:
-
Rebecca Mckeever authored
The tests in alloc_nid_api can now run either memblock_alloc_try_nid() or memblock_alloc_try_nid_raw(). The comment blocks for these tests should not refer to a 'cleared' region since that only applies to memblock_alloc_try_nid(). Remove 'cleared' from the comment blocks so that the comments are accurate for either memblock function. Signed-off-by:
-
- 30 Aug, 2022 10 commits
-
-
Rebecca Mckeever authored
Add tests for memblock_trim_memory() for the following scenarios: - all regions aligned - one unaligned region that is smaller than the alignment - one unaligned region that is unaligned at the base - one unaligned region that is unaligned at the end Reviewed-by:
Shaoqin Huang <shaoqin.huang@intel.com> Signed-off-by:
-
Rebecca Mckeever authored
Add simple tests for memblock_set_bottom_up() and memblock_bottom_up(). Reviewed-by:
-
Rebecca Mckeever authored
Update memblock_alloc_try_nid() tests so that they test either memblock_alloc_try_nid() or memblock_alloc_try_nid_raw() depending on the value of alloc_nid_test_flags. Run through all the existing tests in alloc_nid_api twice: once for memblock_alloc_try_nid() and once for memblock_alloc_try_nid_raw(). When the tests run memblock_alloc_try_nid(), they test that the entire memory region is zero. When the tests run memblock_alloc_try_nid_raw(), they test that the entire memory region is nonzero. The content of the memory region is initialized to nonzero, and we expect it to remain unchanged if running memblock_alloc_try_nid_raw(). Reviewed-by:
-
Rebecca Mckeever authored
Update memblock_alloc() tests so that they test either memblock_alloc() or memblock_alloc_raw() depending on the value of alloc_test_flags. Run through all the existing tests in memblock_alloc_api twice: once for memblock_alloc() and once for memblock_alloc_raw(). When the tests run memblock_alloc(), they test that the entire memory region is zero. When the tests run memblock_alloc_raw(), they test that the entire memory region is nonzero. The content of the memory region is initialized to nonzero, and we expect it to remain unchanged if running memblock_alloc_raw(). Reviewed-by:
-
Rebecca Mckeever authored
Add tests for memblock_add(), memblock_reserve(), memblock_remove(), memblock_free(), and memblock_alloc() for the following test scenarios. memblock_add() and memblock_reserve(): - add/reserve a memory block in the gap between two existing memory blocks, and check that the blocks are merged into one region - try to add/reserve memblock regions that extend past PHYS_ADDR_MAX memblock_remove() and memblock_free(): - remove/free a region when it is the only available region + These tests ensure that the first region is overwritten with a "dummy" region when the last remaining region of that type is removed or freed. - remove/free() a region that overlaps with two existing regions of the relevant type - try to remove/free memblock regions that extend past PHYS_ADDR_MAX memblock_alloc(): - try to allocate a region that is larger than the total size of available memory (memblock.memory) Reviewed-by: -
Rebecca Mckeever authored
Generic tests for memblock_alloc*() functions do not use separate functions for testing top-down and bottom-up allocation directions. Therefore, the function name that is displayed in the verbose testing output does not include the allocation direction. Add an additional prefix when running generic tests for memblock_alloc*() functions that indicates which allocation direction is set. The prefix will be displayed when the tests are run in verbose mode. Reviewed-by:
-
Rebecca Mckeever authored
Update the assert in memblock_alloc_try_nid() and memblock_alloc_from() tests that checks whether the memory is cleared so that it checks the entire chunk of allocated memory instead of just the first byte. Reviewed-by:
-
Rebecca Mckeever authored
Add an assert in memblock_alloc() tests where allocation is expected to occur. The assert checks whether the entire chunk of allocated memory is cleared. The current memblock_alloc() tests do not check whether the allocated memory was zeroed. memblock_alloc() should zero the allocated memory since it is a wrapper for memblock_alloc_try_nid(). Reviewed-by:
-
Rebecca Mckeever authored
The VERBOSE build option was replaced with the --verbose runtime option, but the comments describing the ASSERT_*() macros still refer to the VERBOSE build option. Update these comments so that they refer to the --verbose runtime option. Reviewed-by:
-
Rebecca Mckeever authored
Add a help command line option to the help message. Add the help option to the short and long options so it will be recognized as a valid option. Usage: $ ./main -h Or: $ ./main --help Reviewed-by:
-
- 28 Aug, 2022 25 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull more hotfixes from Andrew Morton: "Seventeen hotfixes. Mostly memory management things. Ten patches are cc:stable, addressing pre-6.0 issues" * tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: .mailmap: update Luca Ceresoli's e-mail address mm/mprotect: only reference swap pfn page if type match squashfs: don't call kmalloc in decompressors mm/damon/dbgfs: avoid duplicate context directory creation mailmap: update email address for Colin King asm-generic: sections: refactor memory_intersects bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown Revert "memcg: cleanup racy sum avoidance code" mm/zsmalloc: do not attempt to free IS_ERR handle binder_alloc: add missing mmap_lock calls when using the VMA mm: re-allow pinning of zero pfns (again) vmcoreinfo: add kallsyms_num_syms symbol mailmap: update Guilherme G. Piccoli's email addresses writeback: avoid use-after-free after removing device shmem: update folio if shmem_replace_page() updates the page mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
-
Linus Torvalds authored
Pull bitmap fixes from Yury Norov: "Fix the reported issues, and implements the suggested improvements, for the version of the cpumask tests [1] that was merged with commit c41e8866 ("lib/test: introduce cpumask KUnit test suite"). These changes include fixes for the tests, and better alignment with the KUnit style guidelines" * tag 'bitmap-6.0-rc3' of github.com:/norov/linux: lib/cpumask_kunit: add tests file to MAINTAINERS lib/cpumask_kunit: log mask contents lib/test_cpumask: follow KUnit style guidelines lib/test_cpumask: fix cpu_possible_mask last test lib/test_cpumask: drop cpu_possible_mask full test
-
Luca Ceresoli authored
My Bootlin address is preferred from now on. Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.comSigned-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atishp@atishpatra.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Peter Xu authored
Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c287605 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by:
Peter Xu <peterx@redhat.com> Reported-by:
Yu Zhao <yuzhao@google.com> Tested-by:
-
Phillip Lougher authored
The decompressors may be called while in an atomic section. So move the kmalloc() out of this path, and into the "page actor" init function. This fixes a regression introduced by commit f268eedd ("squashfs: extend "page actor" to handle missing pages") Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk Fixes: f268eedd ("squashfs: extend "page actor" to handle missing pages") Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Badari Pulavarty authored
When user tries to create a DAMON context via the DAMON debugfs interface with a name of an already existing context, the context directory creation fails but a new context is created and added in the internal data structure, due to absence of the directory creation success check. As a result, memory could leak and DAMON cannot be turned on. An example test case is as below: # cd /sys/kernel/debug/damon/ # echo "off" > monitor_on # echo paddr > target_ids # echo "abc" > mk_context # echo "abc" > mk_context # echo $$ > abc/target_ids # echo "on" > monitor_on <<< fails Return value of 'debugfs_create_dir()' is expected to be ignored in general, but this is an exceptional case as DAMON feature is depending on the debugfs functionality and it has the potential duplicate name issue. This commit therefore fixes the issue by checking the directory creation failure and immediately return the error in the case. Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b5 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by:Badari Pulavarty <badari.pulavarty@intel.com> Signed-off-by:
SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [ 5.15.x] Signed-off-by:
-
Colin Ian King authored
Colin King is working on kernel janitorial fixes in his spare time and using his Intel email is confusing. Use his gmail account as the default email address. Link: https://lkml.kernel.org/r/20220817212753.101109-1-colin.i.king@gmail.comSigned-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Quanyang Wang authored
There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834 ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834 ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 97955936 ("asm/sections: add helpers to check for section data") Signed-off-by:
Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Liu Shixin authored
The vmemmap pages is marked by kmemleak when allocated from memblock. Remove it from kmemleak when freeing the page. Otherwise, when we reuse the page, kmemleak may report such an error and then stop working. kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing) kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff98fb6be00000 (size 335544320): kmemleak: comm "swapper", pid 0, jiffies 4294892296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com Fixes: f41f2ed4 (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page) Signed-off-by:
Liu Shixin <liushixin2@huawei.com> Reviewed-by:
Muchun Song <songmuchun@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Heming Zhao authored
After commit 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job before return error"), any procedure after ocfs2_dlm_init() fails will trigger crash when calling ocfs2_dlm_shutdown(). ie: On local mount mode, no dlm resource is initialized. If ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will trigger kernel crash. This solution should bypass uninitialized resources in ocfs2_dlm_shutdown(). Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com Fixes: 0737e01d ("ocfs2: ocfs2_mount_volume does cleanup job before return error") Signed-off-by:
Heming Zhao <heming.zhao@suse.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shakeel Butt authored
This reverts commit 96e51ccf. Recently we started running the kernel with rstat infrastructure on production traffic and begin to see negative memcg stats values. Particularly the 'sock' stat is the one which we observed having negative value. $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 18446744073708724224 Re-run after couple of seconds $ grep "sock " /mnt/memory/job/memory.stat sock 253952 total_sock 53248 For now we are only seeing this issue on large machines (256 CPUs) and only with 'sock' stat. I think the networking stack increase the stat on one cpu and decrease it on another cpu much more often. So, this negative sock is due to rstat flusher flushing the stats on the CPU that has seen the decrement of sock but missed the CPU that has increments. A typical race condition. For easy stable backport, revert is the most simple solution. For long term solution, I am thinking of two directions. First is just reduce the race window by optimizing the rstat flusher. Second is if the reader sees a negative stat value, force flush and restart the stat collection. Basically retry but limited. Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com Fixes: 96e51ccf ("memcg: cleanup racy sum avoidance code") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Cc: David Hildenbrand <david@redhat.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> [5.15] Signed-off-by:
-
Sergey Senozhatsky authored
zsmalloc() now returns ERR_PTR values as handles, which zram accidentally can pass to zs_free(). Another bad scenario is when zcomp_compress() fails - handle has default -ENOMEM value, and zs_free() will try to free that "pointer value". Add the missing check and make sure that zs_free() bails out when ERR_PTR() is passed to it. Link: https://lkml.kernel.org/r/20220816050906.2583956-1-senozhatsky@chromium.org Fixes: c7e6f17b ("zsmalloc: zs_malloc: return ERR_PTR on failure") Signed-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org>, Signed-off-by:
-
Liam Howlett authored
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages() and when checking for a VMA in binder_alloc_new_buf_locked(). It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock after it verifies a VMA exists, but may be taken again deeper in the call stack, if necessary. Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com Fixes: a43cfc87 (android: binder: stop saving a pointer to the VMA) Signed-off-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by:
Ondrej Mosnacek <omosnace@redhat.com> Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com> Acked-by:
Carlos Llamas <cmllamas@google.com> Tested-by:
-
Alex Williamson authored
The below referenced commit makes the same error as 1c563432 ("mm: fix is_pinnable_page against a cma page"), re-interpreting the logic to exclude pinning of the zero page, which breaks device assignment with vfio. To avoid further subtle mistakes, split the logic into discrete tests. [akpm@linux-foundation.org: simplify comment, per John] Link: https://lkml.kernel.org/r/166015037385.760108.16881097713975517242.stgit@omen Link: https://lore.kernel.org/all/165490039431.944052.12458624139225785964.stgit@omen Fixes: f25cbb7a ("mm: add zone device coherent type memory support") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Suggested-by:
Matthew Wilcox <willy@infradead.org> Suggested-by:
Felix Kuehling <felix.kuehling@amd.com> Tested-by:
Slawomir Laba <slawomirx.laba@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Alistair Popple <apopple@nvidia.com> Signed-off-by:
-
Stephen Brennan authored
The rest of the kallsyms symbols are useless without knowing the number of symbols in the table. In an earlier patch, I somehow dropped the kallsyms_num_syms symbol, so add it back in. Link: https://lkml.kernel.org/r/20220808205410.18590-1-stephen.s.brennan@oracle.com Fixes: 5fd8fea9 ("vmcoreinfo: include kallsyms symbols") Signed-off-by:
Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Guilherme G. Piccoli authored
Both @canonical and @ibm email addresses are invalid now; use my personal address instead. Link: https://lkml.kernel.org/r/20220804202207.439427-1-gpiccoli@igalia.comSigned-off-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by:
-
Khazhismel Kumykov authored
When a disk is removed, bdi_unregister gets called to stop further writeback and wait for associated delayed work to complete. However, wb_inode_writeback_end() may schedule bandwidth estimation dwork after this has completed, which can result in the timer attempting to access the just freed bdi_writeback. Fix this by checking if the bdi_writeback is alive, similar to when scheduling writeback work. Since this requires wb->work_lock, and wb_inode_writeback_end() may get called from interrupt, switch wb->work_lock to an irqsafe lock. Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com Fixes: 45a2966f ("writeback: fix bandwidth estimate for spiky workload") Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Michael Stapelberg <stapelberg+linux@google.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
If we allocate a new page, we need to make sure that our folio matches that new page. If we do end up in this code path, we store the wrong page in the shmem inode's page cache, and I would rather imagine that data corruption ensues. This will be solved by changing shmem_replace_page() to shmem_replace_folio(), but this is the minimal fix. Link: https://lkml.kernel.org/r/20220730042518.1264767-1-willy@infradead.org Fixes: da08e9b7 ("mm/shmem: convert shmem_swapin_page() to shmem_swapin_folio()") Signed-off-by:
William Kucharski <william.kucharski@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Miaohe Lin authored
In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code. Link: https://lkml.kernel.org/r/20220712130542.18836-1-linmiaohe@huawei.com Fixes: f6191471 ("userfaultfd: add UFFDIO_CONTINUE ioctl") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "Fixes: - check that subvolume is writable when changing xattrs from security namespace - fix memory leak in device lookup helper - update generation of hole file extent item when merging holes - fix space cache corruption and potential double allocations; this is a rare bug but can be serious once it happens, stable backports and analysis tool will be provided - fix error handling when deleting root references - fix crash due to assert when attempting to cancel suspended device replace, add message what to do if mount fails due to missing replace item Regressions: - don't merge pages into bio if their page offset is not contiguous - don't allow large NOWAIT direct reads, this could lead to short reads eg. in io_uring" * tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add info when mount fails due to stale replace target btrfs: replace: drop assert for suspended replace btrfs: fix silent failure when deleting root reference btrfs: fix space cache corruption and potential double allocations btrfs: don't allow large NOWAIT direct reads btrfs: don't merge pages into bio if their page offset is not contiguous btrfs: update generation of hole file extent item when merging holes btrfs: fix possible memory leak in btrfs_get_dev_args_from_path() btrfs: check if root is readonly while setting security xattr -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cfis fixes from Steve French: - two locking fixes (zero range, punch hole) - DFS 9 fix (padding), affecting some servers - three minor cleanup changes * tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add helper function to check smb1+ server cifs: Use help macro to get the mid header size cifs: Use help macro to get the header preamble size cifs: skip extra NULL byte in filenames smb3: missing inode locks in punch hole smb3: missing inode locks in zero range
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 fixes from Ingo Molnar: - Fix PAT on Xen, which caused i915 driver failures - Fix compat INT 80 entry crash on Xen PV guests - Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs - Fix RSB stuffing regressions - Fix ORC unwinding on ftrace trampolines - Add Intel Raptor Lake CPU model number - Fix (work around) a SEV-SNP bootloader bug providing bogus values in boot_params->cc_blob_address, by ignoring the value on !SEV-SNP bootups. - Fix SEV-SNP early boot failure - Fix the objtool list of noreturn functions and annotate snp_abort(), which bug confused objtool on gcc-12. - Fix the documentation for retbleed * tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/ABI: Mention retbleed vulnerability info file for sysfs x86/sev: Mark snp_abort() noreturn x86/sev: Don't use cc_platform_has() for early SEV-SNP calls x86/boot: Don't propagate uninitialized boot_params->cc_blob_address x86/cpu: Add new Raptor Lake CPU model number x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry x86/nospec: Fix i386 RSB stuffing x86/nospec: Unwreck the RSB stuffing x86/bugs: Add "unknown" reporting for MMIO Stale Data x86/entry: Fix entry_INT80_compat for Xen PV guests x86/PAT: Have pat_enabled() properly reflect state when running on Xen
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 perf fixes from Ingo Molnar: "Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix, PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix" * tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU perf/x86/intel: Fix pebs event constraints for ADL perf/x86/intel/ds: Fix precise store latency handling perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline perf/x86/lbr: Enable the branch type for the Arch LBR by default
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fixup setup of weak groups when using 'perf stat --repeat', add a 'perf test' for it. - Fix memory leaks in 'perf sched record' detected with -fsanitize=address. - Fix build when PYTHON_CONFIG is user supplied. - Capitalize topdown metrics' names in 'perf stat', so that the output, sometimes parsed, matches the Intel SDM docs. - Make sure the documentation for the save_type filter about Intel systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+ server) reflects recent related kernel changes. - Fix 'perf record' man page formatting of description of support to hybrid systems. - Update arm64´s KVM header from the kernel sources. * tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf stat: Capitalize topdown metrics' names perf docs: Update the documentation for the save_type filter perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=address perf record: Fix manpage formatting of description of support to hybrid systems perf test: Stat test for repeat with a weak group perf stat: Clear evsel->reset_group for each stat run tools kvm headers arm64: Update KVM header from the kernel sources perf python: Fix build when PYTHON_CONFIG is user supplied
-
- 27 Aug, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull thermal control fixes from Rafael Wysocki: "Fix two issues introduced recently and one driver problem leading to a NULL pointer dereference in some cases. Specifics: - Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the required 'trips' property to the thermal zone DT bindings (Daniel Lezcano) - Prevent the int340x_thermal driver from crashing when a package with a buffer of 0 length is returned by an ACPI control method evaluated by it (Lee, Chun-Yi)" * tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR dt-bindings: thermal: Fix missing required property thermal/core: Add missing EXPORT_SYMBOL_GPL -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "Make __resolve_freq() check the presence of the frequency table instead of checking whether or not the ->target_index() callback is implemented by the driver, because that need not be the case when __resolve_freq() is used (Lukasz Luba)" * tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: check only freq_table in __resolve_freq()
-
