The new chip series has 64 bit doorbell for notification queues. Thus,
both control and data path event queues need new routines to write 64 bit
doorbell. Adding the same. There is new doorbell interface between the
chip and driver. Changing the chip specific data structure definitions.

Additional significant changes are listed below
- bnxt_re_net_ring_free/alloc takes a new argument
- bnxt_qplib_enable_nq and enable_rcfw uses new doorbell offset
  for new chip.
- DB mapping for NQ and CREQ now maps 8 bytes.
- DBR_DBR_* macros renames to DBC_DBC_*
- store nq_db_offset in a 32bit data type.
- got rid of __iowrite64_copy, used writeq instead.
- changed the DB header initialization to simpler scheme.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Adding setup and destroy routines for chip-context. The chip context would
be used frequently in control and data path to take execution flow
depending on the chip type.  chip context structure pointer is added to
the relevant data structures.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use is_power_of_2() instead of hard coding it in the driver. While at it,
fix the meaningless error print.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

We are really talking about pinned_vm here.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ib_umem_get() uses gup_longterm() and relies on the lock to stabilze the
vma_list, so we cannot really get rid of mmap_sem altogether, but now that
the counter is atomic, we can get of some complexity that mmap_sem brings
with only pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

usnic_uiom_get_pages() uses gup_longterm() so we cannot really get rid of
mmap_sem altogether in the driver, but we can get rid of some complexity
that mmap_sem brings with only pinned_vm.  We can get rid of the wq
altogether as we no longer need to defer work to unpin pages as the
counter is now atomic. We also share the lock.
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This driver already uses gup_fast() and thus we can just drop the mmap_sem
protection around the pinned_vm counter. Note that the window between when
hfi1_can_pin_pages() is called and the actual counter is incremented
remains the same as mmap_sem was _only_ used for when ->pinned_vm was
touched.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.det>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The driver uses mmap_sem for both pinned_vm accounting and
get_user_pages(). Because rdma drivers might want to use gup_longterm() in
the future we still need some sort of mmap_sem serialization (as opposed
to removing it entirely by using gup_fast()). Now that pinned_vm is atomic
the writer lock can therefore be converted to reader.

This also fixes a bug that __qib_get_user_pages was not taking into
account the current value of pinned_vm.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The driver uses mmap_sem for both pinned_vm accounting and
get_user_pages(). By using gup_fast() and letting the mm handle the lock
if needed, we can no longer rely on the semaphore and simplify the whole
thing.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Taking a sleeping lock to _only_ increment a variable is quite the
overkill, and pretty much all users do this. Furthermore, some drivers
(ie: infiniband and scif) that need pinned semantics can go to quite
some trouble to actually delay via workqueue (un)accounting for pinned
pages when not possible to acquire it.

By making the counter atomic we no longer need to hold the mmap_sem and
can simply some code around it for pinned_vm users. The counter is 64-bit
such that we need not worry about overflows such as rdma user input
controlled from userspace.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Move the iwpm kdoc comments from the prototype declarations to above
the function bodies.  There are no functional changes in this patch.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Netlink statistics exported by rdma-cm never had any working user space
component published to the mailing list or to any open source
project. Canvassing various proprietary users, and the original requester,
we find that there are no real users of this interface.

This patch simply removes all occurrences of RDMA CM netlink in favour of
modern nldev implementation, which provides the same information and
accompanied by widely used user space component.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Avoid that sparse reports the following for the mlx5 driver:

drivers/infiniband/hw/mlx5/qp.c:2671:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2671:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2671:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2679:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2679:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2679:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2680:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2680:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2680:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2684:34: warning: invalid assignment: |=
drivers/infiniband/hw/mlx5/qp.c:2684:34:    left side has type restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2684:34:    right side has type int
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: incorrect type in argument 1 (different base types)
drivers/infiniband/hw/mlx5/qp.c:2686:28:    expected unsigned int [usertype] val
drivers/infiniband/hw/mlx5/qp.c:2686:28:    got restricted __be32 [usertype]
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32
drivers/infiniband/hw/mlx5/qp.c:2686:28: warning: cast from restricted __be32

This patch does not change any functionality.

Fixes: a60109dc ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A soft iwarp driver that uses the host TCP stack via a kernel mode socket
does not need port mapping.  In fact, if the port map daemon, iwpmd, is
running, then iwpmd must not try and create/bind a socket to the actual
port for a soft iwarp connection, since the driver already has that socket
bound.

Yet if the soft iwarp driver wants to interoperate with hard iwarp devices
that -are- using port mapping, then the soft iwarp driver's mappings still
need to be maintained and advertised by the iwpm protocol.

This patch enhances the rdma driver<->iwcm interface to allow an iwarp
driver to specify that it does not want port mapping.  The iwpm
kernel<->iwpmd interface is also enhanced to pass up this information on
map requests.

Care is taken to interoperate with the current iwpmd version (ABI version
3) and only use the new NL attributes if iwpmd supports ABI version 4.

The ABI version define has also been created in rdma_netlink.h so both
kernel and user code can share it.  The iwcm and iwpmd negotiate the ABI
version to use with a new HELLO netlink message.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In order to add new IWPM_NL attributes, the enums for the IWPM commands
attributes are refactored such that a new attribute can be added without
breaking ABI version 3. Instead of sharing nl attribute enums for both
request and response messages, we create separate enums for each IWPM
message request and reply.  This allows us to extend any given IWPM
message by adding new attributes for just that message.  These new enums
are created, though, in a way to avoid breaking ABI version 3.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

So future additions to that struct get initialized by default.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

On hi08 chip, There is a possibility of chip hanging when sending doorbell
during reset. We can fix it by prohibiting doorbell during reset.

Fixes: 2d407888 ("RDMA/hns: Add support for processing send wr and receive wr")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset.  We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In the reset process, the hns3 NIC driver notifies the RoCE driver to
perform reset related processing by calling the .reset_notify() interface
registered by the RoCE driver in hip08 SoC.

In the current version, if a reset occurs simultaneously during the
execution of rmmod or insmod ko, there may be Oops error as below:

 Internal error: Oops: 86000007 [#1] PREEMPT SMP
 Modules linked in: hns_roce(O) hns3(O) hclge(O) hnae3(O) [last unloaded: hns_roce_hw_v2]
 CPU: 0 PID: 14 Comm: kworker/0:1 Tainted: G           O      4.19.0-ge00d540 #1
 Hardware name: Huawei Technologies Co., Ltd.
 Workqueue: events hclge_reset_service_task [hclge]
 pstate: 60c00009 (nZCv daif +PAN +UAO)
 pc : 0xffff00000100b0b8
 lr : 0xffff00000100aea0
 sp : ffff000009afbab0
 x29: ffff000009afbab0 x28: 0000000000000800
 x27: 0000000000007ff0 x26: ffff80002f90c004
 x25: 00000000000007ff x24: ffff000008f97000
 x23: ffff80003efee0a8 x22: 0000000000001000
 x21: ffff80002f917ff0 x20: ffff8000286ea070
 x19: 0000000000000800 x18: 0000000000000400
 x17: 00000000c4d3225d x16: 00000000000021b8
 x15: 0000000000000400 x14: 0000000000000400
 x13: 0000000000000000 x12: ffff80003fac6e30
 x11: 0000800036303000 x10: 0000000000000001
 x9 : 0000000000000000 x8 : ffff80003016d000
 x7 : 0000000000000000 x6 : 000000000000003f
 x5 : 0000000000000040 x4 : 0000000000000000
 x3 : 0000000000000004 x2 : 00000000000007ff
 x1 : 0000000000000000 x0 : 0000000000000000
 Process kworker/0:1 (pid: 14, stack limit = 0x00000000af8f0ad9)
 Call trace:
  0xffff00000100b0b8
  0xffff00000100b3a0
  hns_roce_init+0x624/0xc88 [hns_roce]
  0xffff000001002df8
  0xffff000001006960
  hclge_notify_roce_client+0x74/0xe0 [hclge]
  hclge_reset_service_task+0xa58/0xbc0 [hclge]
  process_one_work+0x1e4/0x458
  worker_thread+0x40/0x450
  kthread+0x12c/0x130
  ret_from_fork+0x10/0x18
 Code: bad PC value

In the reset process, we will release the resources firstly, and after the
hardware reset is completed, we will reapply resources and reconfigure the
hardware.

We can solve this problem by modifying both the NIC and the RoCE
driver. We can modify the concurrent processing in the NIC driver to avoid
calling the .reset_notify and .uninit_instance ops at the same time. And
we need to modify the RoCE driver to record the reset stage and the
driver's init/uninit state, and check the state in the .reset_notify,
.init_instance. and uninit_instance functions to avoid NULL pointer
operation.

Fixes: cb7a94c9 ("RDMA/hns: Add reset process for RoCE in hip08")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently a packet is marked for loopback only if the source and
destination addresses equals. This is not enough when multiple gids are
present in rxe device's gid table and the traffic is from one gid to
another. Fix it by marking the packet for loopback if the destination MAC
address is equal to the source MAC address.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Move the function rxe_init_av() to rxe_av.c file and use it instead of
calling rxe_av_from_attr() and rxe_av_fill_ip_info(), also remove the
unused rxe_dev parameter from rxe_init_av().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes the following sparse warnings:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c:5822:5: warning:
 symbol 'hns_roce_v2_query_srq' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:158:6: warning:
 symbol 'hns_roce_srq_free' was not declared. Should it be static?
drivers/infiniband/hw/hns/hns_roce_srq.c:81:5: warning:
 symbol 'hns_roce_srq_alloc' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Linux 5.0-rc5

Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.

Keeping single line wrapper functions is not useful. Hence remove the
ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add changes to the WQE page-fault handler to

1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure

The rest is handled as for regular RQ WQE.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.

Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In the function mlx5_ib_mr_responder_pfault_handler()

1. The parameter wqe is used as read-only so there is no need to pass it
   by reference.
2. Remove the unused argument pfault from list of arguments.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Expose XRC ODP capabilities as part of the extended device capabilities.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The ODP support matrix is per operation and per transport. The support for
each transport (RC, UD, etc.) is described with a bit field.

ODP for SRQ WQEs is considered a different kind of support from ODP for RQ
WQs and therefore needs a different capability bit.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.

While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.

Fixes: 032080ab ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

From
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

For dependencies needed in the next ODP patches.

* branch 'mlx5-next':
  net/mlx5: Set ODP SRQ support in firmware
  net/mlx5: Add XRC transport to ODP device capabilities layout

Pull x86 fixes from Thomas Gleixner:
 "A few updates for x86:

   - Fix an unintended sign extension issue in the fault handling code

   - Rename the new resource control config switch so it's less
     confusing

   - Avoid setting up EFI info in kexec when the EFI runtime is
     disabled.

   - Fix the microcode version check in the AMD microcode loader so it
     only loads higher version numbers and never downgrades

   - Set EFER.LME in the 32bit trampoline before returning to long mode
     to handle older AMD/KVM behaviour properly.

   - Add Darren and Andy as x86/platform reviewers"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Avoid confusion over the new X86_RESCTRL config
  x86/kexec: Don't setup EFI info if EFI runtime is not enabled
  x86/microcode/amd: Don't falsely trick the late loading mechanism
  MAINTAINERS: Add Andy and Darren as arch/x86/platform/ reviewers
  x86/fault: Fix sign-extend unintended sign extension
  x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode
  x86/cpu: Add Atom Tremont (Jacobsville)

Pull cpu hotplug fixes from Thomas Gleixner:
 "Two fixes for the cpu hotplug machinery:

   - Replace the overly clever 'SMT disabled by BIOS' detection logic as
     it breaks KVM scenarios and prevents speculation control updates
     when the Hyperthreads are brought online late after boot.

   - Remove a redundant invocation of the speculation control update
     function"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM
  x86/speculation: Remove redundant arch_smt_update() invocation

Pull perf fixes from Thomas Gleixner:
 "A pile of perf updates:

   - Fix broken sanity check in the /proc/sys/kernel/perf_cpu_time_max_percent
     write handler

   - Cure a perf script crash which caused by an unitinialized data
     structure

   - Highlight the hottest instruction in perf top and not a random one

   - Cure yet another clang issue when building perf python

   - Handle topology entries with no CPU correctly in the tools

   - Handle perf data which contains both tracepoints and performance
     counter entries correctly.

   - Add a missing NULL pointer check in perf ordered_events_free()"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf script: Fix crash when processing recorded stat data
  perf top: Fix wrong hottest instruction highlighted
  perf tools: Handle TOPOLOGY headers with no CPU
  perf python: Remove -fstack-clash-protection when building with some clang versions
  perf core: Fix perf_proc_update_handler() bug
  perf script: Fix crash with printing mixed trace point and other events
  perf ordered_events: Fix crash in ordered_events__free

Pull EFI fix from Thomas Gleixner:
 "The dump info for the efi page table debugging lacks a terminator
  which causes the kernel to crash when the debugfile is read"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Fix debugfs crash by adding a terminator for ptdump marker