There was a time long ago when the "test" command's documentation
claimed that the "-a" and "-o" arguments did something useful.
But this documentation now suggests letting the shell execute
these boolean operators, so this commit applies that suggestion to
kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit causes kvm-test-1-run-batch.sh to use the new
kvm-assign-cpus.sh and kvm-get-cpus-script.sh scripts to create a
TORTURE_AFFINITY environment variable containing either an empty string
(for no affinity) or a list of CPUs to pin the scenario's vCPUs to.
The additional change to kvm-test-1-run.sh places the per-scenario
number-of-CPUs information where it can easily be found.

If there is some reason why affinity cannot be supplied, this commit
prints and logs the reason via changes to kvm-again.sh.

Finally, this commit updates the kvm-remote.sh script to copy the
qemu-affinity output files back to the host system.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

There is "qemu-affinity", "qemu-cmd", "qemu-retval", but also "qemu_pid".
This is hard to remember, not so good for bash tab completion, and just
plain inconsistent.  This commit therefore renames the "qemu_pid" file to
"qemu-pid".  A couple of the scripts must deal with old runs, and thus
must handle both "qemu_pid" and "qemu-pid", but new runs will produce
"qemu-pid".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The jitter.sh script has some entertaining awk code to generate a
hex mask from a randomly selected CPU number, which is handed to the
"taskset" command.  Except that this command has a "-c" parameter to
take a comma/dash-separated list of CPU numbers.  This commit therefore
saves a few lines of awk by switching to a single-number CPU list.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

There is no way to place the vCPUs in a two-CPU rcutorture scenario to
get variable memory latency.  This commit therefore upgrades the current
two-CPU rcutorture scenarios to four CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit causes the kvm-test-1-run-qemu.sh script to check the
TORTURE_AFFINITY environment variable and to add "taskset" commands to
the qemu-cmd file.  The first "taskset" command is applied only if the
TORTURE_AFFINITY environment variable is a non-empty string, and this
command pins the current scenario's guest OS to the specified CPUs.
The second "taskset" command reports the guest OS's affinity in a new
"qemu-affinity" file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, kvm-test-1-run-qemu.sh applies redirection to each and every
line of each qemu-cmd script.  Only the first line (the only one that
is not a bash comment) needs to be redirected.  Although redirecting
the comments is currently harmless, just adding to the comment, it is
an accident waiting to happen.  This commit therefore adjusts the "sed"
command to redirect only the qemu-system* command itself.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit causes kvm.sh to use the new kvm-assign-cpus.sh and
kvm-get-cpus-script.sh scripts to create a TORTURE_AFFINITY environment
variable containing either an empty string (for no affinity) or a list
of CPUs to pin the scenario's vCPUs to.  A later commit will make
use of this information to actually pin the vCPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit is a first step towards pinning guest-OS vCPUs so as
to force latency differences, especially on multi-socket systems.
The kvm.sh script puts its batch-creation awk script into a temporary
file so that later commits can add the awk code needed to dole out CPUs
so as to maximize latency differences.  This awk code will be used by
multiple scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The last line of kvm-test-1-run-qemu.sh invokes parse-console.sh, but
kvm-test-1-run-qemu.sh is unaware of the PATH containing this script
and does not have the job title handy.  This commit therefore moves
the invocation of parse-console.sh to kvm-test-1-run.sh, which has
PATH and title at hand.  This commit does not add an invocation of
parse-console.sh to kvm-test-1-run-batch.sh because this latter script
is run in the background, and the information will be gathered at the
end of the full run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, kvm-recheck.sh attempts to create a kcsan.sum file even for
build-only runs.  This results in false-positive bash errors due to
there being no console.log files in that case.  This commit therefore
makes kvm-recheck.sh skip creating the kcsan.sum file for build-only runs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The kvm-remote.sh script places the datestamped directory containing
all the build artifacts in the destination systems' /tmp directories,
where they accumulate runtime artifacts such as console.log.  This works,
but some systems have a habit of removing files in /tmp that have not
been recently accessed.  This commit therefore runs a simple script that
periodically accesses all files in the datestamped directory.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit logs additional information to help track down set up and
networking issues.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The qemu-cmd file can contain comments that are not relevant to the
operation of kvm-recheck-lock.sh.  This commit therefore strips these
comments before looking for timing information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The qemu-cmd file can contain comments that are not relevant to the
operation of kvm-recheck-scf.sh.  This commit therefore strips these
comments before looking for timing information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, each -kcsan run in a torture.sh group of runs has its own
kcsan.sum summary.  This works, but there is usually a lot of duplication
between the runs.  This commit therefore also creates an overall kcsan.sum
file for the entire torture.sh run, if there was at least one -kcsan run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The kcsan-collapse.sh script assumes that it is being run over the output
of a single kvm.sh run, which is less than helpful for torture.sh runs.
This commit therefore changes the kcsan-collapse.sh script's "ls" pattern
with a "find" command to enable a KCSAN summary across all the -kcsan
runs in a full torture.sh run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Currently, torture.sh accepts --doall on the one hand and --do-none
on the other, which is a bit inconsistent.  This commit therefore adds
--do-all and --donone so that a fully consistent test may be used.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit adds three short tests of the clocksource-watchdog capability
to the torture.sh script, all to avoid otherwise-inevitable bitrot.
While in the area, fix an obsolete comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs
   are offlined.

 - Fix 'perf test' problems related to the recently added hybrid
   (BIG/little) code.

 - Split ARM's coresight (hw tracing) decode by aux records to avoid
   fatal decoding errors.

 - Fix add event failure in 'perf probe' when running 32-bit perf in a
   64-bit kernel.

 - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set.

 - Fix memory and refcount leaks detected by ASAn when running 'perf
   test', should be clean of warnings now.

 - Remove broken definition of __LITTLE_ENDIAN from tools'
   linux/kconfig.h, which was breaking the build in some systems.

 - Cast PTHREAD_STACK_MIN to int as it may turn into 'long
   sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some
   systems.

 - Fix libperf build error with LIBPFM4=1.

 - Sync UAPI files changed by the memfd_secret new syscall.

* tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits)
  perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set
  perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel
  perf data: Close all files in close_dir()
  perf probe-file: Delete namelist in del_events() on the error path
  perf test bpf: Free obj_buf
  perf trace: Free strings in trace__parse_events_option()
  perf trace: Free syscall tp fields in evsel->priv
  perf trace: Free syscall->arg_fmt
  perf trace: Free malloc'd trace fields on exit
  perf lzma: Close lzma stream on exit
  perf script: Fix memory 'threads' and 'cpus' leaks on exit
  perf script: Release zstd data
  perf session: Cleanup trace_event
  perf inject: Close inject.output on exit
  perf report: Free generated help strings for sort option
  perf env: Fix memory leak of cpu_pmu_caps
  perf test maps__merge_in: Fix memory leak of maps
  perf dso: Fix memory leak in dso__new_map()
  perf test event_update: Fix memory leak of unit
  perf test event_update: Fix memory leak of evlist
  ...

Pull xfs fixes from Darrick Wong:
 "A few fixes for issues in the new online shrink code, additional
  corrections for my recent bug-hunt w.r.t. extent size hints on
  realtime, and improved input checking of the GROWFSRT ioctl.

  IOW, the usual 'I somehow got bored during the merge window and
  resumed auditing the farther reaches of xfs':

   - Fix shrink eligibility checking when sparse inode clusters enabled

   - Reset '..' directory entries when unlinking directories to prevent
     verifier errors if fs is shrinked later

   - Don't report unusable extent size hints to FSGETXATTR

   - Don't warn when extent size hints are unusable because the sysadmin
     configured them that way

   - Fix insufficient parameter validation in GROWFSRT ioctl

   - Fix integer overflow when adding rt volumes to filesystem"

* tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: detect misaligned rtinherit directory extent size hints
  xfs: fix an integer overflow error in xfs_growfs_rt
  xfs: improve FSGROWFSRT precondition checking
  xfs: don't expose misaligned extszinherit hints to userspace
  xfs: correct the narrative around misaligned rtinherit/extszinherit dirs
  xfs: reset child dir '..' entry when unlinking child
  xfs: check for sparse inode clusters that cross new EOAG when shrinking

Pull iomap fixes from Darrick Wong:
 "A handful of bugfixes for the iomap code.

  There's nothing especially exciting here, just fixes for UBSAN (not
  KASAN as I erroneously wrote in the tag message) warnings about
  undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some
  reshuffling of per-page block state info to fix some problems with
  gfs2.

   - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE

   - Fix assertion errors when using inlinedata files on gfs2"

* tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor
  iomap: Don't create iomap_page objects for inline files
  iomap: Permit pages without an iop to enter writeback
  iomap: remove the length variable in iomap_seek_hole
  iomap: remove the length variable in iomap_seek_data

Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Restore the original behavior of scripts/setlocalversion when
   LOCALVERSION is set to empty.

 - Show Kconfig prompts even for 'make -s'

 - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
   for older GNU Make versions

* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: Fix intiramfs script name
  Kbuild: lto: fix module versionings mismatch in GNU make 3.X
  kbuild: do not suppress Kconfig prompts for silent build
  scripts/setlocalversion: fix a bug when LOCALVERSION is empty

Documentation was not changed when renaming the script in commit
80e715a0 ("initramfs: rename gen_initramfs_list.sh to
gen_initramfs.sh"). Fixing this.

Basically does:

 $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh)

Fixes: 80e715a0 ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When building modules(CONFIG_...=m), I found some of module versions
are incorrect and set to 0.
This can be found in build log for first clean build which shows

WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed,
symbol will not be versioned.

But in second build(incremental build), the WARNING disappeared and the
module version becomes valid CRC and make someone who want to change
modules without updating kernel image can't insert their modules.

The problematic code is
+	$(foreach n, $(filter-out FORCE,$^),				\
+		$(if $(wildcard $(n).symversions),			\
+			; cat $(n).symversions >> $@.symversions))

For example:
  rm -f fs/notify/built-in.a.symversions    ; rm -f fs/notify/built-in.a; \
llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \
fs/notify/notification.o fs/notify/group.o ...

`foreach n` shows nothing to `cat` into $(n).symversions because
`if $(wildcard $(n).symversions)` return nothing, but actually
they do exist during this line was executed.

-rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o
-rw-r--r-- 1 root root    111 Jun 13 19:10 fs/notify/fsnotify.o.symversions

The reason is the $(n).symversions are generated at runtime, but
Makefile wildcard function expends and checks the file exist or not
during parsing the Makefile.

Thus fix this by use `test` shell command to check the file
existence in runtime.

Rebase from both:
1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/]
2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/]

Fixes: 38e89184 ("kbuild: lto: fix module versioning")
Co-developed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.

  $ make
  [ snip ]
  Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)

This is the only interactive place in the build process.

Commit 174a1dcc ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.

Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.

Fixes: 174a1dcc ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

The commit 042da426 ("scripts/setlocalversion: simplify the short
version part") reduces indentation. Unfortunately, it also changes behavior
in a subtle way - if the user has empty "LOCALVERSION" variable, the plus
sign is appended to the kernel version. It wasn't appended before.

This patch reverts to the old behavior - we append the plus sign only if
the LOCALVERSION variable is not set.

Fixes: 042da426 ("scripts/setlocalversion: simplify the short version part")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.

Before:

  #perf sched record sleep 1
  event syntax error: 'sched:sched_stat_wait'
                       \___ unknown tracepoint

  Error:  File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
  Hint:   Perhaps this kernel misses some CONFIG_ setting to enable this feature?.

  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Solution:
  Check whether schedstat tracepoints are exposed. If no, these events are not recorded.

After:
  # perf sched record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
  # perf sched report
  run measurement overhead: 4736 nsecs
  sleep measurement overhead: 9059979 nsecs
  the run test took 999854 nsecs
  the sleep test took 8945271 nsecs
  nr_run_events:        716
  nr_sleep_events:      785
  nr_wakeup_events:     0
  ...
  ------------------------------------------------------------

Fixes: 2a09b5de ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The "address" member of "struct probe_trace_point" uses long data type.
If kernel is 64-bit and perf program is 32-bit, size of "address"
variable is 32 bits.

As a result, upper 32 bits of address read from kernel are truncated, an
error occurs during address comparison in kprobe_warn_out_range().

Before:

  # perf probe -a schedule
  schedule is out of .text, skip it.
    Error: Failed to add events.

Solution:
  Change data type of "address" variable to u64 and change corresponding
address printing and value assignment.

After:

  # perf.new.new probe -a schedule
  Added new event:
    probe:schedule       (on schedule)

  You can now use it in all perf tools, such as:

          perf record -e probe:schedule -aR sleep 1

  # perf probe -l
    probe:schedule       (on schedule@kernel/sched/core.c)
  # perf record -e probe:schedule -aR sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ]
  # perf report --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 1K of event 'probe:schedule'
  # Event count (approx.): 1366
  #
  # Overhead  Command          Shared Object      Symbol
  # ........  ...............  .................  ............
  #
       6.22%  migration/0      [kernel.kallsyms]  [k] schedule
       6.22%  migration/1      [kernel.kallsyms]  [k] schedule
       6.22%  migration/2      [kernel.kallsyms]  [k] schedule
       6.22%  migration/3      [kernel.kallsyms]  [k] schedule
       6.15%  migration/10     [kernel.kallsyms]  [k] schedule
       6.15%  migration/11     [kernel.kallsyms]  [k] schedule
       6.15%  migration/12     [kernel.kallsyms]  [k] schedule
       6.15%  migration/13     [kernel.kallsyms]  [k] schedule
       6.15%  migration/14     [kernel.kallsyms]  [k] schedule
       6.15%  migration/15     [kernel.kallsyms]  [k] schedule
       6.15%  migration/4      [kernel.kallsyms]  [k] schedule
       6.15%  migration/5      [kernel.kallsyms]  [k] schedule
       6.15%  migration/6      [kernel.kallsyms]  [k] schedule
       6.15%  migration/7      [kernel.kallsyms]  [k] schedule
       6.15%  migration/8      [kernel.kallsyms]  [k] schedule
       6.15%  migration/9      [kernel.kallsyms]  [k] schedule
       0.22%  rcu_sched        [kernel.kallsyms]  [k] schedule
  ...
  #
  # (Cannot load tips.txt file, please install perf!)
  #
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jianlin Lv <jianlin.lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.

The problem is caused by the iterating variable never reaching 0.

Fixes: 14552063 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e42 ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the patches for this week that came as the fallout of the
  merge window:

   - Two fixes for the NVidia memory controller driver

   - multiple defconfig files get patched to turn CONFIG_FB back on
     after that is no longer selected by CONFIG_DRM

   - ffa and scmpi firmware drivers fixes, mostly addressing compiler
     and documentation warnings

   - Platform specific fixes for device tree files on ASpeed, Renesas
     and NVidia SoC, mostly for recent regressions.

   - A workaround for a regression on the USB PHY with devlink when the
     usb-nop-xceiv driver is not available until the rootfs is mounted.

   - Device tree compiler warnings in Arm Versatile-AB"

* tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
  ARM: dts: versatile: Fix up interrupt controller node names
  ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in
  ARM: configs: Update u8500_defconfig
  ARM: configs: Update Vexpress defconfig
  ARM: configs: Update Versatile defconfig
  ARM: configs: Update RealView defconfig
  ARM: configs: Update Integrator defconfig
  arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/
  firmware: arm_scmi: Fix range check for the maximum number of pending messages
  firmware: arm_scmi: Avoid padding in sensor message structure
  firmware: arm_scmi: Fix kernel doc warnings about return values
  firmware: arm_scpi: Fix kernel doc warnings
  firmware: arm_scmi: Fix kernel doc warnings
  ARM: shmobile: defconfig: Restore graphical consoles
  firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow
  firmware: arm_ffa: Fix the comment style
  firmware: arm_ffa: Simplify probe function
  firmware: arm_ffa: Ensure drivers provide a probe function
  firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow
  firmware: arm_scmi: Ensure drivers provide a probe function
  ...

This reverts commit 78869146.

It's not clear why, but it causes unexplained problems in entirely
unrelated xfs code.  The most likely explanation is some slab
corruption, possibly triggered due to CONFIG_SLUB_DEBUG_ON.  See [1].

It ends up having a few other problems too, like build errors on
arch/arc, and Geert reporting it using much more memory on m68k [3] (it
probably does so elsewhere too, but it is probably just more noticeable
on m68k).

The architecture issues (both build and memory use) are likely just
because this change effectively force-enabled STACKDEPOT (along with a
very bad default value for the stackdepot hash size).  But together with
the xfs issue, this all smells like "this commit was not ready" to me.

Link: https://lore.kernel.org/linux-xfs/YPE3l82acwgI2OiV@infradead.org/ [1]
Link: https://lore.kernel.org/lkml/202107150600.LkGNb4Vb-lkp@intel.com/ [2]
Link: https://lore.kernel.org/lkml/CAMuHMdW=eoVzM1Re5FVoEN87nKfiLmM2+Ah7eNu2KXEhCvbZyA@mail.gmail.com/ [3]
Reported-by: Christoph Hellwig <hch@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "One core fix for an oops which can occur if the error handling thread
  fails to start for some reason and the driver is removed.

  The other fixes are all minor ones in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: core: Add missing host_lock in ufshcd_vops_setup_xfer_req()
  scsi: mpi3mr: Fix W=1 compilation warnings
  scsi: pm8001: Clean up kernel-doc and comments
  scsi: zfcp: Report port fc_security as unknown early during remote cable pull
  scsi: core: Fix bad pointer dereference when ehandler kthread is invalid
  scsi: fas216: Fix a build error
  scsi: core: Fix the documentation of the scsi_execute() time parameter

Pull cifs fixes from Steve French:
 "Eight cifs/smb3 fixes, including three for stable.

  Three are DFS related fixes, and two to fix problems pointed out by
  static checkers"

* tag '5.14-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not share tcp sessions of dfs connections
  SMB3.1.1: fix mount failure to some servers when compression enabled
  cifs: added WARN_ON for all the count decrements
  cifs: fix missing null session check in mount
  cifs: handle reconnect of tcon when there is no cached dfs referral
  cifs: fix the out of range assignment to bit fields in parse_server_interfaces
  cifs: Do not use the original cruid when following DFS links for multiuser mounts
  cifs: use the expiry output of dns_query to schedule next resolution

Merge tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah Khan:
 "Fixes to kunit tool and documentation:

   - fix asserts on older python versions

   - fixes to misleading error messages when TAP header format is
     incorrect or when file is missing

   - documentation fix: drop obsolete information about uml_abort
     coverage

   - remove unnecessary annotations"

* tag 'linux-kselftest-kunit-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Assert the version requirement
  kunit: tool: remove unnecessary "annotations" import
  Documentation: kunit: drop obsolete note about uml_abort for coverage
  kunit: tool: Fix error messages for cases of no tests and wrong TAP header

Merge tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "A fix to memory-hotplug hot-remove test to stop spamming logs with
  dump_page() entries and slowing the system down to a crawl"

* tag 'linux-kselftest-fixes-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: memory-hotplug: avoid spamming logs with dump_page(), ratio limit hot-remove error test

Pull tracing fix from Steven Rostedt:
 "Fix the histogram logic from possibly crashing the kernel

  Working on the histogram code, I found that if you dereference a char
  pointer in a trace event that happens to point to user space, it can
  crash the kernel, as it does no checks of that pointer. I have code
  coming that will do this better, so just remove this ability to treat
  character pointers in trace events as stings in the histogram"

* tag 'trace-v5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Do not reference char * as a string in histograms

Pull devicetree fixes from Rob Herring:

 - Drop 'resets' as required on renesas,du

 - Moving of fixed string patterns for 'properties' instead of
   'patternProperties'

 - Drop more redundant minItems/maxItems that we merged in the merge
   window

 - Indentation warning fix for sja1105

* tag 'devicetree-fixes-for-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: renesas,du: Make resets optional on R-Car H1
  dt-bindings: Move fixed string 'patternProperties' to 'properties'
  dt-bindings: More dropping redundant minItems/maxItems
  dt-bindings: net: dsa: sja1105: Fix indentation warnings