- 09 Nov, 2019 8 commits
-
-
Himanshu Madhani authored
Link: https://lore.kernel.org/r/20191105150657.8092-9-hmadhani@marvell.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Arun Easi authored
P2P needs to take the alternate plogi route. Link: https://lore.kernel.org/r/20191105150657.8092-8-hmadhani@marvell.comReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
Arun Easi authored
On heavy loads, a memory leak of the srb_t structure is observed. This would make the qla2xxx_srbs cache gobble up memory. Fixes: 219d27d7 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-7-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
Current code assumes abort will remove the original command from the active list where scsi_done will not be called. Instead, the eh_abort thread will do the scsi_done. That is not the case. Instead, we have a double scsi_done calls triggering use after free. Abort will tell FW to release the command from FW possesion. The original command will return to ULP with error in its normal fashion via scsi_done. eh_abort path would wait for the original command completion before returning. eh_abort path will not perform the scsi_done call. Fixes: 219d27d7 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.comReviewed-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
This patch fixes driver unload hang by removing msleep() Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191105150657.8092-5-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
when GPSC/GPDB switch command fails, driver just returns without doing a proper cleanup. This patch fixes this memory leak by calling sp->free() in the error path. Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
On switch, fabric and mgt command timeout, driver send Abort to tell FW to return the original command. If abort is timeout, then return both Abort and original command for cleanup. Fixes: 219d27d7 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-3-hmadhani@marvell.comReviewed-by:
-
Quinn Tran authored
Current code will send PRLI with FC-NVMe bit set for the targets which support only FCP. This may result into issue with targets which do not understand NVMe and will go into a strange state. This patch would restart the login process by going back to PLOGI state. The PLOGI state will force the target to respond to correct PRLI request. Fixes: c76ae845 ("scsi: qla2xxx: Add error handling for PLOGI ELS passthrough") Cc: stable@vger.kernel.org # 5.4 Link: https://lore.kernel.org/r/20191105150657.8092-2-hmadhani@marvell.comReviewed-by:
-
- 06 Nov, 2019 25 commits
-
-
Vinod Koul authored
Document "qcom,sm8150-ufshc" compatible string for UFS HC found on SM8150. Link: https://lore.kernel.org/r/20191024074802.26526-2-vkoul@kernel.orgReviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Maurizio Lombardi authored
This patch renames some variables in chap_server_compute_hash() to make it harder to confuse the initiator's challenge with the target's challenge when the mutual chap authentication is used. Link: https://lore.kernel.org/r/20191017131037.9903-4-mlombard@redhat.comSigned-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Maurizio Lombardi authored
Link: https://lore.kernel.org/r/20191017131037.9903-3-mlombard@redhat.comSigned-off-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
Maurizio Lombardi authored
This patch modifies the chap_server_compute_hash() function to make it agnostic to the choice of hash algorithm that is used. It also adds support to three new hash algorithms: SHA1, SHA256 and SHA3-256. The chap_got_response() function has been removed because the digest type validity is already checked by chap_server_open() Link: https://lore.kernel.org/r/20191028123822.5864-2-mlombard@redhat.comSigned-off-by:
-
Bart Van Assche authored
According to SBC-2 a TRANSFER LENGTH field of zero means that 256 logical blocks must be transferred. Make the SCSI tracing code follow SBC-2. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191105215553.185018-1-bvanassche@acm.orgSigned-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.6.0.1 Link: https://lore.kernel.org/r/20191105005708.7399-12-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Some adapters support the ability to hold multiple adapter dumps on the adapter flash. Some adapters default to enabling this feature while others default to single-dump. Make support uniform by enabling dual dump by default. Link: https://lore.kernel.org/r/20191105005708.7399-11-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The current driver attempts to allocate an interrupt vector per cpu using the systems managed IRQ allocator (flag PCI_IRQ_AFFINITY). The system IRQ allocator will either provide the per-cpu vector, or return fewer vectors. When fewer vectors, they are evenly spread between the numa nodes on the system. When run on an AMD architecture, if interrupts occur to a cpu that is not in the same numa node as the adapter generating the interrupt, there are extreme costs and overheads in performance. Thus, if 1:1 vector allocation is used, or the "balanced" vectors in the other numa nodes, performance can be hit significantly. A much more performant model is to allocate interrupts only on the cpus that are in the numa node where the adapter resides. I/O completion is still performed by the cpu where the I/O was generated. Unfortunately, there is no flag to request the managed IRQ subsystem allocate vectors only for the CPUs in the numa node as the adapter. On AMD architecture, revert the irq allocation to the normal style (non-managed) and then use irq_set_affinity_hint() to set the cpu affinity and disable user-space rebalancing. Tie the support into CPU offline/online. If the cpu being offlined owns a vector, the vector is re-affinitized to one of the other CPUs on the same numa node. If there are no more CPUs on the numa node, the vector has all affinity removed and lets the system determine where it's serviced. Similarly, when the cpu that owned a vector comes online, the vector is reaffinitized to the cpu. Link: https://lore.kernel.org/r/20191105005708.7399-10-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The recent affinitization didn't address cpu offlining/onlining. If an interrupt vector is shared and the low order cpu owning the vector is offlined, as interrupts are managed, the vector is taken offline. This causes the other CPUs sharing the vector will hang as they can't get io completions. Correct by registering callbacks with the system for Offline/Online events. When a cpu is taken offline, its eq, which is tied to an interrupt vector is found. If the cpu is the "owner" of the vector and if the eq/vector is shared by other CPUs, the eq is placed into a polled mode. Additionally, code paths that perform io submission on the "sharing CPUs" will check the eq state and poll for completion after submission of new io to a wq that uses the eq. Similarly, when a cpu comes back online and owns an offlined vector, the eq is taken out of polled mode and rearmed to start driving interrupts for eq. Link: https://lore.kernel.org/r/20191105005708.7399-9-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
Current message on FAWWN events is rather cryptic. Expand the message to clarify its meaning. Link: https://lore.kernel.org/r/20191105005708.7399-8-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
Prior to the last FC-NVME-2 draft, SLER and CONF were independent. SLER now requires CONF to be set. Revise the NVME PRLI checking to look for both inorder to enable SLER. Link: https://lore.kernel.org/r/20191105005708.7399-7-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The recently posted patch had a typo that incorrectly tested the receiving function. Fix the typo (change == to !=) Fixes: 95bfc6d8 ("scsi: lpfc: Make FW logging dynamically configurable") Link: https://lore.kernel.org/r/20191105005708.7399-6-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
During heavy RCN activity and log_verbose = 0 we see these messages: 2754 PRLI failure DID:521245 Status:x9/xb2c00, data: x0 0231 RSCN timeout Data: x0 x3 0230 Unexpected timeout, hba link state x5 This is due to delayed RSCN activity. Correct by avoiding the timeout thus the messages by restarting the discovery timeout whenever an rscn is received. Filter PRLI responses such that severity depends on whether expected for the configuration or not. For example, PRLI errors on a fabric will be informational (they are expected), but Point-to-Point errors are not necessarily expected so they are raised to an error level. Link: https://lore.kernel.org/r/20191105005708.7399-5-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
When reading sysfs nvme_info file while a remote port leaves and comes back, a NULL pointer is encountered. The issue is due to ndlp list corruption as the the nvme_info_show does not use the same lock as the rest of the code. Correct by removing the rcu_xxx_lock calls and replace by the host_lock and phba->hbaLock spinlocks that are used by the rest of the driver. Given we're called from sysfs, we are safe to use _irq rather than _irqsave. Link: https://lore.kernel.org/r/20191105005708.7399-4-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The driver today is reading service parameters from the firmware and then overwriting the firmware-provided values with values of its own. There are some switch features that require preliminary FLOGI's that are switch-specific and done prior to the actual fabric FLOGI for traffic. The fw will perform those FLOGIs and will revise the service parameters for the features configured. As the driver later overwrites those values with its own values, it misconfigures things like BBSCN use by doing so. Correct by eliminating the driver-overwrite of firmware values. The driver correctly re-reads the service parameters after each link up to obtain the latest values from firmware. Link: https://lore.kernel.org/r/20191105005708.7399-3-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
If the driver receives a login that is later then LOGO'd by the remote port (aka ndlp), the driver, upon the completion of the LOGO ACC transmission, will logout the node and unregister the rpi that is being used for the node. As part of the unreg, the node's rpi value is replaced by the LPFC_RPI_ALLOC_ERROR value. If the port is subsequently offlined, the offline walks the nodes and ensures they are logged out, which possibly entails unreg'ing their rpi values. This path does not validate the node's rpi value, thus doesn't detect that it has been unreg'd already. The replaced rpi value is then used when accessing the rpi bitmask array which tracks active rpi values. As the LPFC_RPI_ALLOC_ERROR value is not a valid index for the bitmask, it may fault the system. Revise the rpi release code to detect when the rpi value is the replaced RPI_ALLOC_ERROR value and ignore further release steps. Link: https://lore.kernel.org/r/20191105005708.7399-2-jsmart2021@gmail.comSigned-off-by:
-
Al Viro authored
simply not needed there - neither sg_new_read() nor sg_new_write() need it. Link: https://lore.kernel.org/r/20191017193925.25539-8-viro@ZenIV.linux.org.ukSigned-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Al Viro authored
Just use plain copy_from_user() and get_user(). Note that while a buf-derived pointer gets stored into ->dxferp, all places that actually use the resulting value feed it either to import_iovec() or to import_single_range(), and both will do validation. Link: https://lore.kernel.org/r/20191017193925.25539-7-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
Use copy_..._user() instead, both in sg_read() and in sg_read_oxfer(). And don't open-code memdup_user()... Link: https://lore.kernel.org/r/20191017193925.25539-6-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
... just use copy_from_user(). We copy only SZ_SG_IO_HDR bytes, so that would, strictly speaking, loosen the check. However, for call chains via ->write() the caller has actually checked the entire range and SG_IO passes exactly SZ_SG_IO_HDR for count. So no visible behaviour changes happen if we check only what we really need for copyin. Link: https://lore.kernel.org/r/20191017193925.25539-5-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
We don't need to allocate a temporary buffer and read the entire structure in it, only to fetch a single field and free what we'd allocated. Just use get_user() and be done with it... Link: https://lore.kernel.org/r/20191017193925.25539-4-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
Link: https://lore.kernel.org/r/20191017193925.25539-3-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
Link: https://lore.kernel.org/r/20191017193925.25539-2-viro@ZenIV.linux.org.ukSigned-off-by:
-
Al Viro authored
First of all, __put_user() can fail with access_ok() succeeding. And access_ok() + __copy_to_user() is spelled copy_to_user()... __put_user() *can* fail with access_ok() succeeding... Link: https://lore.kernel.org/r/20191017193925.25539-1-viro@ZenIV.linux.org.ukSigned-off-by:
-
Pan Bian authored
The memory chunk io_req is released by mempool_free. Accessing io_req->start_time will result in a use after free bug. The variable start_time is a backup of the timestamp. So, use start_time here to avoid use after free. Link: https://lore.kernel.org/r/1572881182-37664-1-git-send-email-bianpan2016@163.comSigned-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
-
- 02 Nov, 2019 5 commits
-
-
Bart Van Assche authored
This patch fixes an unintended sign extension on left shifts. From Colin King: "Shifting a u8 left will cause the value to be promoted to an integer. If the top bit of the u8 is set then the following conversion to an u64 will sign extend the value causing the upper 32 bits to be set in the result." Fix this by using get_unaligned_be*() instead. Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Link: https://lore.kernel.org/r/20191101211447.187151-1-bvanassche@acm.orgReported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Saurav Girepunje authored
Only csio_hw_free() calling csio_dfs_destroy() and it is not checking return value. So remove the return from csio_dfs_destroy(). Link: https://lore.kernel.org/r/20191028194234.GA27848@sauravSigned-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> Signed-off-by:
-
Saurav Girepunje authored
debugfs_remove_recursive() has taken the null pointer into account. Remove the null check before debugfs_remove_recursive(). Link: https://lore.kernel.org/r/20191026195625.GA22455@sauravSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Saurav Girepunje authored
Replace assignment of 0 to pointer with NULL assignment. Link: https://lore.kernel.org/r/20191025135010.GA6191@sauravSigned-off-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Ming Lei authored
It isn't necessary to check the host depth in scsi_queue_rq() any more since it has been respected by blk-mq before calling scsi_queue_rq() via getting driver tag. Lots of LUNs may attach to same host and per-host IOPS may reach millions, so we should avoid expensive atomic operations on the host-wide counter in the IO path. This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() with one scsi command state for reading the count of busy IOs for scsi_mq. It is observed that IOPS is increased by 15% in IO test on scsi_debug (32 LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket system. Cc: Jens Axboe <axboe@kernel.dk> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Omar Sandoval <osandov@fb.com>, Cc: "Martin K. Petersen" <martin.petersen@oracle.com>, Cc: James Bottomley <james.bottomley@hansenpartnership.com>, Cc: Christoph Hellwig <hch@lst.de>, Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Laurence Oberman <loberman@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20191025065855.6309-1-ming.lei@redhat.comSigned-off-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
-
- 01 Nov, 2019 2 commits
-
-
Bart Van Assche authored
Declare all variables that hold dev_cmd_type values as an enum instead of as an int. Cc: Yaniv Gardi <ygardi@codeaurora.org> Cc: Subhash Jadavani <subhashj@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191029230710.211926-3-bvanassche@acm.orgSigned-off-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Bart Van Assche authored
Fix the following three kernel-doc warnings: drivers/scsi/ufs/ufs_bsg.c:165: warning: Function parameter or member 'hba' not described in 'ufs_bsg_remove' drivers/scsi/ufs/ufshcd.c:5789: warning: Function parameter or member 'cmd_type' not described in 'ufshcd_issue_devman_upiu_cmd' drivers/scsi/ufs/ufshcd.c:5789: warning: Excess function parameter 'msgcode' description in 'ufshcd_issue_devman_upiu_cmd' Cc: Yaniv Gardi <ygardi@codeaurora.org> Cc: Subhash Jadavani <subhashj@codeaurora.org> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20191029230710.211926-2-bvanassche@acm.orgSigned-off-by:
-
