- 19 May, 2010 40 commits
-
-
Dmitri Belimov authored
The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF. This tuner has internal I2C switch. This switch switch I2C bus between DVB-T and IF part. Default state is DVB-T. When module saa7134 is load it can't find IF tda9887 and disable analog TV mode. Sets internal I2C switch of the tuner to IF by send special value to the tuner as for receive analog TV from low band. It can be usefule for other cards. I didn't set configure a tuner by a tuner model because this tuner can have different I2C address. May be we can do it later after discuss for more robust support a tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stefan Ringel authored
Signed-off-by:
Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
switch to a gpio structure Signed-off-by:
-
Dan Carpenter authored
Return an error if the controller is not found. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The original code doesn't handle the situation where the controller is not found. Signed-off-by:
-
Dan Carpenter authored
Return an error if the controller is not found. Signed-off-by:
-
Dan Carpenter authored
"dev" is never NULL here so there is no need to check. Signed-off-by:
-
Dean Anderson authored
adding v4l2_device structure. if one video_register_device call fails, allows use of other devices or channels. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Dean Anderson authored
Signed-off-by:
-
Dean Anderson authored
big kernel lock removed from open function. v4l2 code does not require locking the open function except to check asynchronous firmware load state, which is protected by a mutex Signed-off-by:
-
Dean Anderson authored
call to video_device_alloc was not being checked in probe function. code simplified and uses video_device inside device structure. Signed-off-by:
-
Dean Anderson authored
removal of unused pipe array (of size one). Signed-off-by:
-
Dean Anderson authored
simplifies use of kref in driver Signed-off-by:
-
Dan Carpenter authored
The "AUVI_INPUT(tmp)" macro uses "tmp" as an index of an array with AU0828_MAX_INPUT elements. Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch fixes code that checks for CX88_VMUX_TELEVISION, but not CX88_VMUX_CABLE. This prevented for example the audio standard from being set when using the cable input. Signed-off-by:
Istvan Varga <istvanv@users.sourceforge.net> Signed-off-by:
-
Christoph Fritz authored
makes USB_PWC_INPUT_EVDEV to depend also on USB_PWC Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
-
Bjørn Mork authored
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Also clean up if we are unable to register the tuner and LNB drivers [mchehab@redhat.com: add printk log level, to calm down chechpatch.pl] Signed-off-by:
Bjørn Mork <bjorn@mork.no> Reported-by:
Fladischer Michael <FladischerMichael@fladi.at> Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
David Härdeman authored
This patch adds an RC6 decoder (modes 0 and 6A) to ir-core. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
This patch adds NECx support to drivers/media/IR/ir-nec-decoder.c Signed-off-by:
-
David Härdeman authored
This patch adds RC5x support to drivers/media/IR/ir-rc5-decoder.c Signed-off-by:
-
Nicolas Noirbent authored
Fix a divide-by-zero error in ds3000's ds3000_read_snr(), when getting a very low signal reading (dvbs2_signal_reading >= 1). This prevents some nasty EIPs when running szap-s2 with a very low signal strength. Signed-off-by:
Nicolas Noirbent <nicolas.noirbent@smartjog.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/gspca/cpia1.c:1063: warning: ‘command_setlights’ defined but not used Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/IR/ir-raw-event.c:55: warning: ‘wq_load’ defined but not used drivers/media/IR/ir-raw-event.c:222: warning: ‘init_decoders’ defined but not used drivers/media/IR/rc-map.c: In function ‘get_rc_map’: drivers/media/IR/rc-map.c:40: warning: unused variable ‘rc’ Signed-off-by: -
Andreas Bombe authored
Due to obvious copy and paste coding a number of video capture drivers which implement a limit on the buffer memory decremented the user supplied buffer count in a while loop until it reaches an acceptable value. This is a silly thing to do when the maximum value can be directly computed. Signed-off-by:
Andreas Bombe <aeb@debian.org> Signed-off-by:
-
Herton Ronaldo Krzesinski authored
This reverts commit bc52d6eb. On newer kernels, a saa7134 board stopped to display TV video output properly. After a bisect, I found it as the commit causing the issue. Turns out that v4l_bound_align_image isn't doing the same bounding calculation as manually done previously in saa7134_try_fmt_vid_cap. What isn't equal is the calculation done in clamp align, while previously it did "f->fmt.pix.width &= ~0x03", clamp_align function does "Round to nearest aligned value" as stated in the comment, which yields a different result. If I comment the round calculation in clamp_align like this: "x = (x /*+ (1 << (align - 1))*/) & mask", I get it fixed too, because this way the calculation is the same then. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
Wolfram Sang authored
In file included from drivers/media/dvb/dvb-usb/dib0700_devices.c:14: drivers/media/dvb/frontends/dib8000.h: In function 'dib8000_get_adc_power': drivers/media/dvb/frontends/dib8000.h:112: warning: no return statement in function returning non-void Fixed by adding a return to the dummy function. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in drivers/media/dvb/ngene/ngene-core.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Now that video_ioctl2 no longer clobbers the argument for _IO() ioctls we can move these into vidioc_default where they really belong. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Try to make a more sensible sequence of events in __video_do_ioctl: first check for a valid ops pointer, then get the compat part done. The VIDIOCGMBUF command is now part of the big switch. Signed-off-by:
-
Hans Verkuil authored
After unregister_device all fileops are blocked, except for ioctls. So it is not just the open that is blocked, others are as well. Signed-off-by:
-
Hans Verkuil authored
Note that I have not been able to find anyone with this hardware. I tried contacting the author without success, searched on eBay and similar places without luck either. So this conversion is untested. That said, it was pretty straightforward so it is time to have this driver join the V4L2 world at last. Signed-off-by:
-
Hans Verkuil authored
The indentation of the sections had gone wrong, causing a mistake with section nesting. Fixed. Signed-off-by:
-
Hans Verkuil authored
The usbvision driver created vbi device nodes but the actual implementation was just stubs and only returned errors to userspace. In addition it used video_usercopy() and we want to remove that eventually. So remove all the vbi code except for the vbi flag in the card definition should someone ever be mad enough to work on a proper implementation for this driver. Signed-off-by:
-
Hans Verkuil authored
You want to be able to reach the debug code at the end of this function, so don't use return, use break. Signed-off-by:
-
Hans Verkuil authored
If the ioctl was defined without direction (e.g. _IO('o', 25)), then the arg as passed to vidioc_default was NULL instead of the original argument. Several ioctls in e.g. include/linux/dvb/video.h and audio.h use this type of ioctl to pass simple numerical values to the driver. Signed-off-by: -
Hans Verkuil authored
For some reason the definition of enum v4l2_ctrl_type is far from the place where it is actually needed. This makes it hard to work with this header. Move it to just before struct v4l2_queryctrl, which is the one that actually uses it. Signed-off-by:
-
Hans Verkuil authored
The spec says that the control ID for these types of controls is the same as that of the control class. But it should read: 'control class + 1'. Signed-off-by:
-
Dan Carpenter authored
If the kmalloc() failed for "ccdc_cfg = kmalloc(...);" then we would exit with the lock held. I moved the mutex_lock() below the allocation because it isn't protecting anything in that block and allocations are allocations are sometimes slow. Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
ir-core.h has the kABI to be used by the bridge drivers, when needing to register IR protocols and pass IR events. However, the same file also contains IR subsystem internal calls, meant to be used inside ir-core and between ir-core and the raw decoders. Better to move those functions to an internal header, for some reasons: 1) Header will be a little more cleaner; 2) It avoids the need of recompile everything (bridge/hardware drivers, etc), just because a new decoder were added, or some other internal change were needed; 3) Better organize the ir-core API, splitting the functions that are internal to IR core and the ancillary drivers (decoders, lirc_dev) from the features that should be exported to IR subsystem clients. Signed-off-by:
-
