Eduard Zingerman says:

====================
follow up for __jited test tag

This patch-set is a collection of follow-ups for
"__jited test tag to check disassembly after jit" series (see [1]).

First patch is most important:
as it turns out, I broke all test_loader based tests for s390 CI.
E.g. see log [2] for s390 execution of test_progs,
note all 'verivier_*' tests being skipped.
This happens because of incorrect handling of corner case when
get_current_arch() does not know which architecture to return.

Second patch makes matching of function return sequence in
verifier_tailcall_jit more flexible:

    -__jited("	retq")
    +__jited("	{{(retq|jmp	0x)}}")

The difference could be seen with and w/o mitigations=off boot
parameter for test VM (CI runs with mitigations=off, hence it
generates retq).

Third patch addresses Alexei's request to add #define and a comment in
jit_disasm_helpers.c.

[1] https://lore.kernel.org/bpf/20240820102357.3372779-1-eddyz87@gmail.com/
[2] https://github.com/kernel-patches/bpf/actions/runs/10518445973/job/29144511595
====================

Link: https://lore.kernel.org/r/20240823080644.263943-1-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Extract local label length as a #define directive and
elaborate why 'i % MAX_LOCAL_LABELS' expression is needed
for local labels array initialization.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-4-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Depending on kernel parameters, x86 jit generates either retq or jump
to rethunk for 'exit' instruction. The difference could be seen when
kernel is booted with and without mitigations=off parameter.
Relax the verifier_tailcall_jit test case to match both variants.

Fixes: e5bdd6a8 ("selftests/bpf: validate jit behaviour for tail calls")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

At the moment, when test_loader.c:get_current_arch() can't determine
the arch, it returns 0. The arch check in run_subtest() looks as
follows:

	if ((get_current_arch() & spec->arch_mask) == 0) {
		test__skip();
		return;
	}

Which means that all test_loader based tests would be skipped if arch
could not be determined. get_current_arch() recognizes x86_64, arm64
and riscv64. Which means that CI skips test_loader tests for s390.

Fix this by making sure that get_current_arch() always returns
non-zero value. In combination with default spec->arch_mask == -1 this
should cover all possibilities.

Fixes: f406026f ("selftests/bpf: by default use arch mask allowing all archs")
Fixes: 7d743e4c ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240823080644.263943-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add a selftest to confirm the issue, which gets -EINVAL when update
attached freplace prog to prog_array map, has been fixed.

cd tools/testing/selftests/bpf; ./test_progs -t tailcalls
328/25  tailcalls/tailcall_freplace:OK
328     tailcalls:OK
Summary: 1/25 PASSED, 0 SKIPPED, 0 FAILED
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20240728114612.48486-3-leon.hwang@linux.devSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Cross-merge bpf fixes after downstream PR including
important fixes (from bpf-next point of view):
commit 41c24102 ("selftests/bpf: Filter out _GNU_SOURCE when compiling test_cpp")
commit fdad456c ("bpf: Fix updating attached freplace prog in prog_array map")

No conflicts.

Adjacent changes in:
include/linux/bpf_verifier.h
kernel/bpf/verifier.c
tools/testing/selftests/bpf/Makefile

Link: https://lore.kernel.org/bpf/20240813234307.82773-1-alexei.starovoitov@gmail.com/Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says:

====================
support bpf_fastcall patterns for calls to kfuncs

As an extension of [1], allow bpf_fastcall patterns for kfuncs:
- pattern rules are the same as for helpers;
- spill/fill removal is allowed only for kfuncs listed in the
  is_fastcall_kfunc_call (under assumption that such kfuncs would
  always be members of special_kfunc_list).

Allow bpf_fastcall rewrite for bpf_cast_to_kern_ctx() and
bpf_rdonly_cast() in order to conjure selftests for this feature.

After this patch-set verifier would rewrite the program below:

  r2 = 1
  *(u64 *)(r10 - 32) = r2
  call %[bpf_cast_to_kern_ctx]
  r2 = *(u64 *)(r10 - 32)
  r0 = r2;"

As follows:

  r2 = 1   /* spill/fill at r10[-32] is removed */
  r0 = r1  /* replacement for bpf_cast_to_kern_ctx() */
  r0 = r2
  exit

Also, attribute used by LLVM implementation of the feature had been
changed from no_caller_saved_registers to bpf_fastcall (see [2]).
This patch-set replaces references to nocsr by references to
bpf_fastcall to keep LLVM and Kernel parts in sync.

[1] no_caller_saved_registers attribute for helper calls
    https://lore.kernel.org/bpf/20240722233844.1406874-1-eddyz87@gmail.com/
[2] [BPF] introduce __attribute__((bpf_fastcall))
    https://github.com/llvm/llvm-project/pull/105417

Changes v2->v3:
- added a patch fixing arch_mask handling in test_loader,
  otherwise newly added tests for the feature were skipped
  (a fix for regression introduced by a recent commit);
- fixed warning regarding unused 'params' variable;
- applied stylistical fixes suggested by Yonghong;
- added acks from Yonghong;

Changes v1->v2:
- added two patches replacing all mentions of nocsr by bpf_fastcall
  (suggested by Andrii);
- removed KF_NOCSR flag (suggested by Yonghong).

v1: https://lore.kernel.org/bpf/20240812234356.2089263-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240817015140.1039351-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240822084112.3257995-1-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Use kfunc_bpf_cast_to_kern_ctx() and kfunc_bpf_rdonly_cast() to verify
that bpf_fastcall pattern is recognized for kfunc calls.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-7-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

If test case does not specify architecture via __arch_* macro consider
that it should be run for all architectures.

Fixes: 7d743e4c ("selftests/bpf: __jited test tag to check disassembly after jit")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-6-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

do_misc_fixups() relaces bpf_cast_to_kern_ctx() and bpf_rdonly_cast()
by a single instruction "r0 = r1". This follows bpf_fastcall contract.
This commit allows bpf_fastcall pattern rewrite for these two
functions in order to use them in bpf_fastcall selftests.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-5-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Recognize bpf_fastcall patterns around kfunc calls.
For example, suppose bpf_cast_to_kern_ctx() follows bpf_fastcall
contract (which it does), in such a case allow verifier to rewrite BPF
program below:

  r2 = 1;
  *(u64 *)(r10 - 32) = r2;
  call %[bpf_cast_to_kern_ctx];
  r2 = *(u64 *)(r10 - 32);
  r0 = r2;

By removing the spill/fill pair:

  r2 = 1;
  call %[bpf_cast_to_kern_ctx];
  r0 = r2;
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-4-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and selftests parts in sync.

[1] https://github.com/llvm/llvm-project/pull/105417Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Attribute used by LLVM implementation of the feature had been changed
from no_caller_saved_registers to bpf_fastcall (see [1]).
This commit replaces references to nocsr by references to bpf_fastcall
to keep LLVM and Kernel parts in sync.

[1] https://github.com/llvm/llvm-project/pull/105417Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822084112.3257995-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In arraymap.c:

In bpf_array_map_seq_start() and bpf_array_map_seq_next()
cast return values from the __percpu address space to
the generic address space via uintptr_t [1].

Correct the declaration of pptr pointer in __bpf_array_map_seq_show()
to void __percpu * and cast the value from the generic address
space to the __percpu address space via uintptr_t [1].

In hashtab.c:

Assign the return value from bpf_mem_cache_alloc() to void pointer
and cast the value to void __percpu ** (void pointer to percpu void
pointer) before dereferencing.

In memalloc.c:

Explicitly declare __percpu variables.

Cast obj to void __percpu **.

In helpers.c:

Cast ptr in BPF_CALL_1 and BPF_CALL_2 from generic address space
to __percpu address space via const uintptr_t [1].

Found by GCC's named address space checks.

There were no changes in the resulting object files.

[1] https://sparse.docs.kernel.org/en/latest/annotations.html#address-space-nameSigned-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Hao Luo <haoluo@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240811161414.56744-1-ubizjak@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Eduard Zingerman says:

====================
bpf: fix null pointer access for malformed BPF_CORE_TYPE_ID_LOCAL relos

Liu RuiTong reported an in-kernel null pointer derefence when
processing BPF_CORE_TYPE_ID_LOCAL relocations referencing non-existing
BTF types. Fix this by adding proper id checks.

Changes v2->v3:
- selftest update suggested by Andrii:
  avoid memset(0) for log buffer and do memset(0) for bpf_attr.

Changes v1->v2:
- moved check from bpf_core_calc_relo_insn() to bpf_core_apply()
  now both in kernel and in libbpf relocation type id is guaranteed
  to exist when bpf_core_calc_relo_insn() is called;
- added a test case.

v1: https://lore.kernel.org/bpf/20240821164620.1056362-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240822001837.2715909-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240822080124.2995724-1-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Check that verifier rejects BPF program containing relocation
pointing to non-existent BTF type.

To force relocation resolution on kernel side test case uses
bpf_attr->core_relos field. This field is not exposed by libbpf,
so directly do BPF system call in the test.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.

Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.

Simplest reproducer is a program:

    r0 = 0
    exit

With a single relocation record:

    .insn_off = 0,          /* patch first instruction */
    .type_id = 100500,      /* this type id does not exist */
    .access_str_off = 6,    /* offset of string "0" */
    .kind = BPF_CORE_TYPE_ID_LOCAL,

See the link for original reproducer or next commit for a test case.

Fixes: 74753e14 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <cnitlrt@gmail.com>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Let the kmemdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240821073709.4067177-1-yujiaoliang@vivo.com

Merge tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Ilpo Järvinen:

 - ISST: Fix an error-handling corner case

 - platform/surface: aggregator: Minor corner case fix and new HW
   support

* tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ISST: Fix return value on last invalid resource
  platform/surface: aggregator: Fix warning when controller is destroyed in probe
  platform/surface: aggregator_registry: Add support for Surface Laptop 6
  platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5
  platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2
  platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
  platform/surface: aggregator_registry: Add Support for Surface Pro 10
  platform/x86: asus-wmi: Add quirk for ROG Ally X

Pull erofs fixes from Gao Xiang:
 "As I mentioned in the merge window pull request, there is a regression
  which could cause system hang due to page migration. The corresponding
  fix landed upstream through MM tree last week (commit 2e6506e1:
  "mm/migrate: fix deadlock in migrate_pages_batch() on large folios"),
  therefore large folios can be safely allowed for compressed inodes and
  stress tests have been running on my fleet for over 20 days without
  any regression. Users have explicitly requested this for months, so
  let's allow large folios for EROFS full cases now for wider testing.

  Additionally, there is a fix which addresses invalid memory accesses
  on a failure path triggered by fault injection and two minor cleanups
  to simplify the codebase.

  Summary:

   - Allow large folios on compressed inodes

   - Fix invalid memory accesses if z_erofs_gbuf_growsize() partially
     fails

   - Two minor cleanups"

* tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
  erofs: allow large folios for compressed files
  erofs: get rid of check_layout_compatibility()
  erofs: simplify readdir operation

Eduard Zingerman says:

====================
__jited test tag to check disassembly after jit

Some of the logic in the BPF jits might be non-trivial.
It might be useful to allow testing this logic by comparing
generated native code with expected code template.
This patch set adds a macro __jited() that could be used for
test_loader based tests in a following manner:

    SEC("tp")
    __arch_x86_64
    __jited("   endbr64")
    __jited("   nopl    (%rax,%rax)")
    __jited("   xorq    %rax, %rax")
    ...
    __naked void some_test(void) { ... }

Also add a test for jit code generated for tail calls handling to
demonstrate the feature.

The feature uses LLVM libraries to do the disassembly.
At selftests compilation time Makefile detects if these libraries are
available. When libraries are not available tests using __jit_x86()
are skipped.
Current CI environment does not include llvm development libraries,
but changes to add these are trivial.

This was previously discussed here:
https://lore.kernel.org/bpf/20240718205158.3651529-1-yonghong.song@linux.dev/

Patch-set includes a few auxiliary steps:
- patches #2 and #3 fix a few bugs in test_loader behaviour;
- patch #4 replaces __regex macro with ability to specify regular
  expressions in __msg and __xlated using "{{" "}}" escapes;
- patch #8 updates __xlated to match disassembly lines consequently,
  same way as __jited does.

Changes v2->v3:
- changed macro name from __jit_x86 to __jited with __arch_* to
  specify disassembly arch (Yonghong);
- __jited matches disassembly lines consequently with "..."
  allowing to skip some number of lines (Andrii);
- __xlated matches disassembly lines consequently, same as __jited;
- "{{...}}" regex brackets instead of __regex macro;
- bug fixes for old commits.

Changes v1->v2:
- stylistic changes suggested by Yonghong;
- fix for -Wformat-truncation related warning when compiled with
  llvm15 (Yonghong).

v1: https://lore.kernel.org/bpf/20240809010518.1137758-1-eddyz87@gmail.com/
v2: https://lore.kernel.org/bpf/20240815205449.242556-1-eddyz87@gmail.com/
====================

Link: https://lore.kernel.org/r/20240820102357.3372779-1-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Both __xlated and __jited work with disassembly.
It is logical to have both work in a similar manner.

This commit updates __xlated macro handling in test_loader.c by making
it expect matches on sequential lines, same way as __jited operates.
For example:

    __xlated("1: *(u64 *)(r10 -16) = r1")      ;; matched on line N
    __xlated("3: r0 = &(void __percpu *)(r0)") ;; matched on line N+1

Also:

    __xlated("1: *(u64 *)(r10 -16) = r1")      ;; matched on line N
    __xlated("...")                            ;; not matched
    __xlated("3: r0 = &(void __percpu *)(r0)") ;; mantched on any
                                               ;; line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-10-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

A program calling sub-program which does a tail call.
The idea is to verify instructions generated by jit for tail calls:
- in program and sub-program prologues;
- for subprogram call instruction;
- for tail call itself.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-9-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Allow to verify jit behaviour by writing tests as below:

    SEC("tp")
    __arch_x86_64
    __jited("   endbr64")
    __jited("   nopl    (%rax,%rax)")
    __jited("   xorq    %rax, %rax")
    ...
    __naked void some_test(void)
    {
        asm volatile (... ::: __clobber_all);
    }

Allow regular expressions in patterns, same way as in __msg.
By default assume that each __jited pattern has to be matched on the
next consecutive line of the disassembly, e.g.:

    __jited("   endbr64")             # matched on line N
    __jited("   nopl    (%rax,%rax)") # matched on line N+1

If match occurs on a wrong line an error is reported.
To override this behaviour use __jited("..."), e.g.:

    __jited("   endbr64")             # matched on line N
    __jited("...")                    # not matched
    __jited("   nopl    (%rax,%rax)") # matched on any line >= N
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-7-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This commit adds a utility function to get disassembled text for jited
representation of a BPF program designated by file descriptor.
Function prototype looks as follows:

    int get_jited_program_text(int fd, char *text, size_t text_sz)

Where 'fd' is a file descriptor for the program, 'text' and 'text_sz'
refer to a destination buffer for disassembled text.
Output format looks as follows:

    18:	77 06                               	ja	L0
    1a:	50                                  	pushq	%rax
    1b:	48 89 e0                            	movq	%rsp, %rax
    1e:	eb 01                               	jmp	L1
    20:	50                                  L0:	pushq	%rax
    21:	50                                  L1:	pushq	%rax
     ^  ^^^^^^^^                             ^  ^^^^^^^^^^^^^^^^^^
     |  binary insn                          |  textual insn
     |  representation                       |  representation
     |                                       |
    instruction offset              inferred local label name

The code and makefile changes are inspired by jit_disasm.c from bpftool.
Use llvm libraries to disassemble BPF program instead of libbfd to avoid
issues with disassembly output stability pointed out in [1].

Selftests makefile uses Makefile.feature to detect if LLVM libraries
are available. If that is not the case selftests build proceeds but
the function returns -EOPNOTSUPP at runtime.

[1] commit eb9d1acf ("bpftool: Add LLVM as default library for disassembling JIT-ed programs")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-6-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Upcoming changes require a notation to specify regular expression
matches for regular verifier log messages, disassembly of BPF
instructions, disassembly of jited instructions.

Neither basic nor extended POSIX regular expressions w/o additional
escaping are good for this role because of wide use of special
characters in disassembly, for example:

    movq -0x10(%rbp), %rax  ;; () are special characters
    cmpq $0x21, %rax        ;; $ is a special character

    *(u64 *)(r10 -16) = r1  ;; * and () are special characters

This commit borrows syntax from LLVM's FileCheck utility.
It replaces __regex macro with ability to embed regular expressions
in __msg patters using "{{" "}}" pairs for escaping.
Syntax for __msg patterns:

    pattern := (<verbatim text> | regex)*
    regex := "{{" <posix extended regular expression> "}}"

For example, pattern "foo{{[0-9]+}}" matches strings like
"foo0", "foo007", etc.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-5-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.

Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:

    /* seq A */            /* seq B */
    __tag("foo")           __tag("foo")
    __tag("bar")           __tag("bar")
    __tag("foo")

Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:

    #define __msg(msg) \
      __attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))

Using this definition the "seq A" from example above is translated to
BTF as follows:

    [..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
    [..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
    [..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1

Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.

Fixes: 537c3f66 ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.

Fixes: 4ef5d6af ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When running test_loader based tests in the verbose mode each matched
message leaves a trace in the stderr, e.g.:

    ./test_progs -vvv -t ...
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec
    validate_msgs:PASS:expect_msg 0 nsec

This is not very helpful when debugging such tests and clobbers the
log a lot.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-2-eddyz87@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Andrii Nakryiko says:

====================
Support passing BPF iterator to kfuncs

Add support for passing BPF iterator state to any kfunc. Such kfunc has to
declare such argument with valid `struct bpf_iter_<type> *` type and should
use "__iter" suffix in argument name, following the established suffix-based
convention. We add a simple test/demo iterator getter in bpf_testmod.
====================

Link: https://lore.kernel.org/r/20240808232230.2848712-1-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Define BPF iterator "getter" kfunc, which accepts iterator pointer as
one of the arguments. Make sure that argument passed doesn't have to be
the very first argument (unlike new-next-destroy combo).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-4-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

There are potentially useful cases where a specific iterator type might
need to be passed into some kfunc. So, in addition to existing
bpf_iter_<type>_{new,next,destroy}() kfuncs, allow to pass iterator
pointer to any kfunc.

We employ "__iter" naming suffix for arguments that are meant to accept
iterators. We also enforce that they accept PTR -> STRUCT btf_iter_<type>
type chain and point to a valid initialized on-the-stack iterator state.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240808232230.2848712-3-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Verifier enforces that all iterator structs are named `bpf_iter_<name>`
and that whenever iterator is passed to a kfunc it's passed as a valid PTR ->
STRUCT chain (with potentially const modifiers in between).

We'll need this check for upcoming changes, so instead of duplicating
the logic, extract it into a helper function.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240808232230.2848712-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Pull smb server fixes from Steve French:

 - important reconnect fix

 - fix for memcpy issues on mount

 - two minor cleanup patches

* tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: Replace one-element arrays with flexible-array members
  ksmbd: fix spelling mistakes in documentation
  ksmbd: fix race condition between destroy_previous_session() and smb2 operations()
  ksmbd: Use unsafe_memcpy() for ntlm_negotiate

If z_erofs_gbuf_growsize() partially fails on a global buffer due to
memory allocation failure or fault injection (as reported by syzbot [1]),
new pages need to be freed by comparing to the existing pages to avoid
memory leaks.

However, the old gbuf->pages[] array may not be large enough, which can
lead to null-ptr-deref or out-of-bound access.

Fix this by checking against gbuf->nrpages in advance.

[1] https://lore.kernel.org/r/000000000000f7b96e062018c6e3@google.com

Reported-by: syzbot+242ee56aaa9585553766@syzkaller.appspotmail.com
Fixes: d6db47e5 ("erofs: do not use pagepool in z_erofs_gbuf_growsize()")
Cc: <stable@vger.kernel.org> # 6.10+
Reviewed-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240820085619.1375963-1-hsiangkao@linux.alibaba.com

Pull iommufd fixes from Jason Gunthorpe:

 - Incorrect error unwind in iommufd_device_do_replace()

 - Correct a sparse warning missing static

* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
  iommufd/selftest: Make dirty_ops static
  iommufd/device: Fix hwpt at err_unresv in iommufd_device_do_replace()

Pull cxl fixes from Dave Jiang:
 "Check for RCH dport before accessing pci_host_bridge and a fix to
  address a KASAN warning for the cxl regression test suite cxl-test"

* tag 'cxl-fixes-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/test: Skip cxl_setup_parent_dport() for emulated dports
  cxl/pci: Get AER capability address from RCRB only for RCH dport

When only the last resource is invalid, tpmi_sst_dev_add() is returing
error even if there are other valid resources before. This function
should return error when there are no valid resources.

Here tpmi_sst_dev_add() is returning "ret" variable. But this "ret"
variable contains the failure status of last call to sst_main(), which
failed for the invalid resource. But there may be other valid resources
before the last entry.

To address this, do not update "ret" variable for sst_main() return
status.

If there are no valid resources, it is already checked for by !inst
below the loop and -ENODEV is returned.

Fixes: 9d1d3626 ("platform/x86: ISST: Support partitioned systems")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # 6.10+
Link: https://lore.kernel.org/r/20240816163626.415762-1-srinivas.pandruvada@linux.intel.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Cupertino Miranda says:

====================
Correct recent GCC incompatible changes.

Hi everyone,

Apologies for the previous patches which did not include a cover letter.
My wish was to send 3 indepepdent patches but after the initial mistake lets keep
this as a series although they are all independent from themselves.

The changes in this patch series is related to recovering GCC support to
build the selftests.
A few tests and a makefile change have broken the support for GCC in the
last few months.

Looking forward to your comments.

Best regards,
Cupertino
====================

Link: https://lore.kernel.org/r/20240819151129.1366484-1-cupertino.miranda@oracle.comSigned-off-by: Andrii Nakryiko <andrii@kernel.org>

GCC errors when compiling tailcall_bpf2bpf_hierarchy2.c and
tailcall_bpf2bpf_hierarchy3.c with the following error:

progs/tailcall_bpf2bpf_hierarchy2.c: In function 'tailcall_bpf2bpf_hierarchy_2':
progs/tailcall_bpf2bpf_hierarchy2.c:66:9: error: input operand constraint contains '+'
   66 |         asm volatile (""::"r+"(ret));
      |         ^~~

Changed implementation to make use of __sink macro that abstracts the
desired behaviour.

The proposed change seems valid for both GCC and CLANG.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240819151129.1366484-4-cupertino.miranda@oracle.com