- 10 Apr, 2013 1 commit
-
-
Andy Zhou authored
Signed-off-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
Jesse Gross <jesse@nicira.com>
-
- 02 Apr, 2013 1 commit
-
-
Thomas Graf authored
The port specific options are currently unused resulting in an empty OVS_VPORT_ATTR_OPTIONS nested attribute being inserted into every OVS_VPORT_CMD_GET message. Don't insert OVS_VPORT_ATTR_OPTIONS if no options are present. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
- 30 Mar, 2013 6 commits
-
-
Thomas Graf authored
It contains the public netlink interface bits required by userspace to make use of the interface. Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Signed-off-by:
-
Thomas Graf authored
Kills the FLOW_BUFSIZE constant which needs to be calculated manually and replaces it with key_attr_size() based on nla_total_size(). Calculates the size of datapath messages instead of relying on NLMSG_DEFAULT_SIZE and moves the existing message size calculations into own functions for clarity. Signed-off-by:
-
Thomas Graf authored
Less error prone as it takes into account the length of both the destination buffer and the source attribute and documents when data is copied from an attribute. Signed-off-by:
-
Thomas Graf authored
Specifying the minimal length in the policy makes it reuseable and documents the interface. Signed-off-by:
-
- 29 Mar, 2013 14 commits
-
-
Rajesh Borundia authored
Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o VFs might get scheduled out after sending a command to a PF and scheduled in after receiving a response. Implement a worker thread to handle atomic commands. Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o Add support for commands from VF to PF. o PF validates the commands sent by the VF before sending it to adapter. o vPort is a container of resources. PF creates vPort for VFs and attach resources to it. vPort is transparent to the VF. o Separate 83xx TX and RX hardware resource cleanup from 82xx. Signed-off-by:
Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
o Adapter provides communication channel between VF and PF. Any control commands from the VF driver are sent to the PF driver through this communication channel. PF driver validates the commands before sending them to the adapter. Similarly PF driver forwards any control command responses to the VF driver through this communication channel. Adapter sends message pending event to VF or PF when there is an outstanding response or a command for VF or PF respectively. When a command or a response is sent over a channel VF or PF cannot send another command or a response until adapter sends a channel free event. Adapter allocates 1K area to VF and PF each for this communication. o Commands and responses are encapsulated in a header. Header determines sequence id, number of fragments, fragment number etc. Signed-off-by:
-
Rajesh Borundia authored
o VF will use shared MSI-X interrupt vector for Tx and Rx. o When QLCNIC_INTR_SHARED flag is set Tx and Rx will share MSI-X interrupt vector. Tx will use a separate MSI-X interrupt vector from Rx otherwise. Signed-off-by:
-
Rajesh Borundia authored
o Add PCI device entry for VF. o Add HW operations for VF. Signed-off-by:
-
Rajesh Borundia authored
o Add QLCNIC_SRIOV to Kconfig. o Provide PCI sysfs hooks to enable and disable SR-IOV. o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined. o qlcnic_sriov_pf.c has all the PF related SR-IOV functionality. o qlcnic_sriov_common.c has VF functionality and SR-IOV functionality which is common between VF and PF. o qlcnic_sriov.h is a common header file for SR-IOV defines. Signed-off-by:
-
Paul Bolle authored
The CONFIG_ARCH_IXDP2X01 and CONFIG_MACH_IXDP2351 Kconfig macros are unused since the ixp23xx and ixp2000 platforms were removed in v3.5. So remove the last code still depending on these macros. And since CS89x0_NONISA_IRQ was only set if either of these two macros was defined we can also remove that macro and the code depending on it. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Sergei Shtylyov authored
Commit d0418bb7 (net: sh_eth: Add eth support for R8A7779 device) was a failed attempt to add support for one of members of the R-Car SoC family. That's for three reasons: it treated R8A7779 the same as SH7724 except including quite dirty hack adding ECMR_ELB bit to the mask in sh_eth_set_rate() while not removing ECMR_RTM bit (despite it's reserved in R-Car Ether), and it didn't add a new register offset array despite the closest SH_ETH_REG_FAST_SH4 mapping differs by 0x200 to the offsets all the R-Car Ether registers have, and also some of the registers in this old mapping don't exist on R-Car Ether (due to this, SH7724's 'sh_eth_my_cpu_data' structure is not adequeate for R-Car too). Fix all these shortcomings, restoring the SH7724 related section to its pristine state... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
The driver's header file contains initialized register offset tables which (as any data definitions), of course, have no business being there. Move them to the driver's body, somewhat beautifying the initializers, while at it... Signed-off-by:
-
John Fastabend authored
In rtnl_fdb_dump() when the fdb_dump ndo op is not populated we never set the idx value so that cb->arg[0] is always 0. Resulting in a endless loop of messages. Introduced with this commit, commit 090096bf Author: Vlad Yasevich <vyasevic@redhat.com> Date: Wed Mar 6 15:39:42 2013 +0000 net: generic fdb support for drivers without ndo_fdb_<op> CC: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
Pravin B Shelar authored
As Ben pointed out following patch fixes bug in checking device name length limits while forming tunnel device name. CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Li RongQing authored
replace per_cpu with per_cpu_ptr to save conversion between address and pointer Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
Hong Zhiguo <honkiko@gmail.com> Signed-off-by:
-
- 28 Mar, 2013 18 commits
-
-
Alexandru Copot authored
Commit 94191213 replaced the macros NLMSG_NEXT with calls to nlmsg_next which produces this warning: kernel/audit.c: In function ‘audit_receive_skb’: kernel/audit.c:928:3: warning: passing argument 2 of ‘nlmsg_next’ makes pointer from integer without a cast In file included from include/net/rtnetlink.h:5:0, from include/net/neighbour.h:28, from include/net/dst.h:17, from include/net/sock.h:68, from kernel/audit.c:55: include/net/netlink.h:359:1: note: expected ‘int *’ but argument is of type ‘int’ Fix this by sending the intended pointer. Signed-off-by:
Alexandru Copot <alex.mihai.c@gmail.com> Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Steffen Trumtrar authored
Use clk_prepare_enable/clk_disable_unprepare to be safe on SMP systems. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Steffen Trumtrar authored
The core has a bit for swapping packet data endianism. Reset default from Cadence is off. Xilinx however, who uses this core on the Zynq SoCs, opted for on. Force it to off. This shouldn't change the behaviour for current users of the macb, but enables usage on Zynq devices. Signed-off-by:
-
Steffen Trumtrar authored
At least in the cadence IP core on the Xilinx Zynq SoC the TCOMP/RCOMP flags are not auto-cleaned. As these flags are evaluated, they need to be cleaned. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== This series contains updates to e1000e, ixgbe and ixgbevf. Majority of the changes are against e1000e (from Bruce Allan). Bruce adds additional error handling on PHY register access, as well as improve slow performance on 82579 when connected to a 10Mbit hub. In addition, fixes LED blink logic for cathode LED design. Most notable is added EEE support which is enabled by default and the added support for LTR on I217/I218. The ixgbe and ixgbevf from Greg Rose changes the VM so that if a user does not assign a MAC address, the MAC address is set to all zeros instead of a random MAC address. This ensures that we always know when we have a random address and udev won't get upset about it. ==================== Signed-off-by: -
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - A fix for the network coding component which has been added within the last pull request (so it is in linux-3.10). The problem has been spotted thanks to Fengguang Wu's automated daily checks on our tree. - Implementation of the RTNL API for virtual interface creation/deletion and slave manipulation - substitution of seq_printf with seq_puts when possible - minor cleanups Signed-off-by: -
Hong zhi guo authored
Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
-
Hong zhi guo authored
Signed-off-by:
-
Greg Rose authored
If the administrator has not assigned a MAC address to the VF via the PF then handle it gracefully by generating a temporary MAC address. This ensures that we always know when we have a random address and udev won't get upset about it. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Stefan Assmann <sassmann@kpanic.de> Tested-by:
Sibai Li <sibai.li@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
If the user has not assigned a MAC address to a VM, then don't give it a random one. Instead, just give it zeros and let it figure out what to do with them. Signed-off-by:
-
Bruce Allan authored
The previous commit ce43a216 (e1000e: cleanup USLEEP_RANGE checkpatch checks) converted a number of delays and sleeps as recommended in ./Documentation/timers/timers-howto.txt. Unfortunately, a few of the udelay() to usleep_range() conversions are in code paths that are in an atomic context in which usleep_range() should not be used. Revert those specific changes. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Bruce Allan authored
Signed-off-by:
-
