- 30 Oct, 2017 6 commits
-
-
Arnd Bergmann authored
Merge tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Pull "ARM: Keystone DTS update for 4.15" from Santosh Shilimkar: - McASP support for K2G EVM - I2C support for K2G EVM - USB support for K2G EVM - SPI & SPI NOR flash support for K2G EVM - ECAP PWM support for K2G EVM * tag 'keystone_dts_for_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add bindings for SPI NOR flash ARM: dts: keystone-k2g: Add SPI nodes ARM: dts: keystone-k2g-evm: Enable PWM ECAP0 ARM: dts: keystone-k2g: Add ECAP PWM DT nodes ARM: dts: k2g-evm: Enable USB 0 and 1 ARM: dts: k2g: Add USB instances ARM: dts: keystone-k2g-evm: Add I2C EEPROM DT entry ARM: dts: keystone-k2g: Add I2C nodes ARM: dts: keystone-k2g: Add McASP nodes
-
http://github.com/Broadcom/stblinuxArnd Bergmann authored
Pull "Broadcom devicetree changes for 4.15" from Florian Fainelli: This pull request contains Broadcom ARM-based Device Tree changes for 4.15, please pull the following: - Eric adds support for the CLCD and PWM controller on Cygnus chis - Loic fixes the console path on the Raspberry Pi 3 (already submitted as fixes) and then proceeds with enabling the BCM43438 bluetooth chip on the Raspberry Pi 3 - Rafal specifies the USB ports on the Luxul XWR-1200 - Dan adds support for the Luxul ABR-4500 based on BCM47094, the Luxul XAP-810 and XAP-1440 both based on BCM53573 - Florian adds support for the Broadcom Hurricane 2 SoC by adding general machine binding, clock binding, SoC DTS include file and a DTS for the Ubiquiti Networks UniFi Switch 8 * tag 'arm-soc/for-4.15/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8 dt-bindings: Add Ubiquiti Networks vendor prefix ARM: dts: Add Broadcom Hurricane 2 DTS include file dt-bindings: Document Broadcom Hurricane 2 clocks dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs ARM: dts: BCM53573: Add DT for Luxul XAP-1440 ARM: dts: BCM53573: Add DT for Luxul XAP-810 ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul XWR-1200 ARM: dts: bcm2837-rpi-3-b: Add bcm43438 serial slave ARM: dts: bcm283x: Fix console path on RPi3 ARM: dts: cygnus: Add the PWM node ARM: dts: cygnus: Add the CLCD controller
-
Arnd Bergmann authored
Merge tag 'tegra-for-4.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "ARM: tegra: Device tree changes for v4.15-rc1" from Thierry Reding: Adds support for the CEC controller found on Tegra124 and enables it on Tegra K1. * tag 'tegra-for-4.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Enable CEC support on Jetson TK1 ARM: tegra: Add CEC support for Tegra124
-
Arnd Bergmann authored
Merge tag 'tegra-for-4.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "dt-bindings: Updates for v4.15-rc1" from Thierry Reding: This contains the addition of a clock alias which will be used to fix the implementation of the SOR1 clock. Also included are the bindings for the Tegra186 BPMP thermal driver, a prerequisite for both the driver and device tree changes. * tag 'tegra-for-4.15-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: Add bindings for nvidia,tegra186-bpmp-thermal dt-bindings: clock: tegra: Add sor1_out clock
-
Arnd Bergmann authored
Merge tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman: * r8a77430 (RZ/G1M) SoC - Add XHCI support to SoC DT. Boards may enable this as appropriate * All Renesas ARM based SoCs - Add missing clocks for ARM CPU cores Geert Uytterhoeven says "This series improves DT hardware descriptions for Renesas arm32 SoCs by adding missing clocks properties to the device nodes corresponding to ARM CPU cores." * R-Car Gen 1 and 2, and RZ/G SoCs - Use R-Car Fallback compat strings for GPIO Simon Horman says "Use newly added R-Car GPIO Gen 1, 2 and 3 fallback compat strings in peace of now deprecated non-generation specific R-Car GPIO fallback compat string in the DT of Renesas ARM and arm64 based SoCs. As noted in the changelogs for the r8a777[89] changes, this introduces an incompatibility with pre-v4.14 kernels used with new DTBs. There is no run-time effect for other SoCs updated by this changeset." * r7s72100 (RZ/A1H) GR-Peach board - Add pin configuration subnode for ETHER pin group. This avoids relying on boot-loader configuration of these pins. - Enable ostm0 and ostm1 timers Jacopo Mondi says these are "to be used as clock source and clockevent source. The timers provides greater accuracy than the already enabled mtu2 one." - Correct leds node name indent - Enable MTU2 timer pulse unit Jacopo Mondi says "MTU2 multi-function/multi-channel timer/counter is not enabled for GR-Peach board. The timer is used as clock event source to schedule wake-ups, and without this enabled all sleeps not performed through busy waiting hang the board." * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM - Add USB function support * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform - Add USB2.0 Host support * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform - Rework DT architecture and add DT for camera DB Fabrizio Castro says "Some of the serial interfaces are exposed on the camera daughter board. The camera daughter board can be connected to the carrier board by means of expansion connectors 1, 2 and 3. The carrier board may host an RZ/G1M or an RZ/G1N based SoM. While adding support for the serial interfaces on the camera daughter board we faced the dilemma of how to properly describe all of the possible HW configurations and how to maximize code reuse. The best option would be to use device tree overlays, however there is still some work to be done on that front before actually using them, therefore for the time being we decided to provide .dtsi files to describe the carrier board and the camera daughter board, and provide .dts files to describe the HW configurations we need to support." * r8a779[0-4] R-Car Gen2 SoCs - Use generic node name for VSP1 nodes Geert Uytterhoeven says "This patch series replaces the specific node names used for the VSP1 nodes by the preferred generic node names, cfr. commit 0e1bfb72 ("v4l: vsp1: Use generic node name")." * tag 'renesas-dt2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (42 commits) ARM: dts: r8a7743: Add xhci support to SoC dtsi ARM: dts: r7s72100: Add clock for CA9 CPU core dt-bindings: clk: r7s72100: Add missing I and G clocks ARM: dts: sh73a0: Add clocks for CA9 CPU cores ARM: dts: r8a7794: Add missing clock for secondary CA7 CPU core ARM: dts: r8a7793: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7792: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7791: Add missing clock for secondary CA15 CPU core ARM: dts: r8a7790: Add clocks for CA7 CPU cores ARM: dts: r8a7790: Add missing clocks for secondary CA15 CPU cores ARM: dts: r8a7779: Add clocks for CA9 CPU cores ARM: dts: r8a7778: Add clock for CA9 CPU core ARM: dts: r8a7743: Add missing clock for secondary CA15 CPU core ARM: dts: r8a73a4: Add clock for CA15 CPU0 core ARM: dts: r8a7794: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7793: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7792: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7791: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7790: Use R-Car GPIO Gen2 fallback compat string ARM: dts: r8a7743: Use R-Car GPIO Gen2 fallback compat string ...
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner DT changes for 4.15" from Maxime Ripard: The most notable changes are: - Conversion to the last SoC (A10, A20) to the new clock framework - HDMI and dual pipeline support for the A10, A20 and A31 DRM driver - Support for the various power supplies on a number of boards - Fix of DTC warnings on a number of SoCs, but most of them still need some work - New boards: A20-OLinuXino-MICRO-eMMC, TBS A711, Banana Pi M2 Berry, Banana Pi M2 Ultra - New R40 SoC support * tag 'sunxi-dt-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (63 commits) ARM: sun8i: r40: enable USB host for Banana Pi M2 Ultra ARM: sun8i: v40: add 5V regulator for Banana Pi M2 Berry ARM: sun8i: r40: add 5V regulator for Banana Pi M2 Ultra ARM: sun8i: r40: add USB host port nodes for R40 ARM: dts: sun4i: Enable HDMI support on some A10 devices ARM: dts: sun7i: Enable HDMI support on some A20 devices ARM: dts: sun7i: Add device nodes for display pipelines ARM: dts: sun4i: Add device nodes for display pipelines ARM: dts: sun8i: r40: add watchdog device node ARM: dts: sun5i: reference-design-tablet: Enable AXP209 AC and battery ARM: dts: sun9i: Change node names to remove underscores ARM: dts: sun9i: Change node names to remove underscores ARM: dts: sun4i: Remove underscores from nodes names ARM: dts: sun4i: Provide default muxing for relevant controllers ARM: dts: sun4i: Change pinctrl nodes to avoid warning ARM: dts: sun6i: Enable HDMI support on some A31/A31s devices ARM: dts: sun6i: Add device node for HDMI controller ARM: dts: sun4i: Change LRADC node names to avoid warnings ARM: dts: sun4i: Remove skeleton and memory to avoid warnings ARM: dts: sun4i: Remove gpio-keys warnings ...
-
- 20 Oct, 2017 4 commits
-
-
Icenowy Zheng authored
Banana Pi M2 Ultra board features two USB host ports, connected to the two USB host ports on the SoC. Add support for them. Signed-off-by:
Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Chen-Yu Tsai <wens@csie.org>
-
Icenowy Zheng authored
On the Banana Pi M2 Berry board, the 5V power output (used by HDMI, SATA and USB) is controlled via a GPIO. Add regulator node for it. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Signed-off-by:
-
Icenowy Zheng authored
On newer revisions of the Banana Pi M2 Ultra boards, the 5V power output (used by HDMI, SATA and USB) is controller via a GPIO. Add the regulator node for it. Older revisions just have the 5V power output always on, and the GPIO is reserved on these boards. So it won't affect the older revisions. Signed-off-by:
-
Icenowy Zheng authored
Allwinner R40 SoC features a USB OTG port and two USB HOST ports. Add support for the host ports in the DTSI file. The OTG controller still cannot work with existing compatibles, and needs more investigation. So it's not added yet. Signed-off-by:
-
- 19 Oct, 2017 25 commits
-
-
Arnd Bergmann authored
Merge tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "device tree changes for omaps for v4.15 merge window" from Tony Lindgren: Device tree changes for omaps for v4.15 merge window to improve support for omap35xx-evm, am34xx-epos-evm and dra7: - A series of changes to fix support for omap35xx-evm - A series of changes to add earlycon support for n8x0, pandaboard and omap5 boards - A series of changes for am43xx-epos-evm pinctrl modes for default and sleep states - A series of changes to correct pbias regulator voltage for dra7 from 3V to 3.3V - Use microchip compatible instead of deprecated mcp compatible for mcp23017 * tag 'omap-for-v4.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits) ARM: dts: omap3: Replace deprecated mcp prefix ARM: dts: dra7-evm: Move pcie RC node to common file ARM: dts: omap5: Increase max-voltage of pbias regulator ARM: dts: dra7: Increase max-voltage of pbias regulator ARM: dts: am43xx-epos-evm: Add default pinmux for unused pins ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for usb2_phy1 and usb2_phy2 ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for uart0 ARM: dts: am43xx-epos-evm: Add default and sleep pinmux for matrix_keypad0 ARM: dts: am43xx-epos-evm: Add sleep pinmux for mmc1 ARM: dts: am43xx-epos-evm: Add sleep pinmux for pixcir_ts ARM: dts: am43xx-epos-evm: Add sleep pinmux for gpmc ARM: dts: am43xx-epos-evm: Add sleep pinmux for ecap0 ARM: dts: am43xx-epos-evm: Add sleep pinmux for qspi1 ARM: dts: am43xx-epos-evm: Add sleep pinmux for spi0 and spi1 ARM: dts: am43xx: Introduce additional pinmux definitions for DS0 ARM: dts: Configure earlycon for omap5-common ARM: dts: Configure earlycon for pandaboard ARM: dts: Configure earlycon for n8x0 ARM: dts: omap3-evm: Add DSS {vdds_dsi,vdda_video}-supply references ARM: dts: omap3: Add Sharp LS037V7DW01 'envdd' supply ...
-
Arnd Bergmann authored
Merge tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc Pull "non-urgent device tree fixes for omaps for v4.15 merge window" from Tony Lindgren Non-urgent device tree fixes for omaps that can all wait for v4.15 merge window. Turns out that we have many devices working just because we have the legacy platform data still around. This is mostly an issue for omap4, other SoCs just have minimal fixes needed. As many of the missing device tree nodes and properties are for devices that have no drivers in the mainline kernel, such as slimbus, iss, mcasp, aess, fdif and gpu, we might as well start using the new "ti,sysc" interconnect target module binding for them so we can get the devices with no child device drivers idled. This also makes it possible to drop unnecessary platform data in later patches. * tag 'omap-for-v4.15/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix typo for omap4 mcasp rx path ARM: dts: Configure SmartReflex only to idle the interconnect target module ARM: dts: Add nodes for missing omap4 interconnect target modules dt-bindings: bus: Minimal TI sysc interconnect target module binding ARM: dts: Add missing hwmod related properties for dra7 ARM: dts: Add missing hwmod related nodes for am33xx ARM: dts: Add missing dma hwmod property for omap5 ARM: dts: Add missing wdt3 node for omap4 ARM: dts: Add missing hsi node for omap4 ARM: dts: Add missing onewire node for omap4 ARM: dts: Add missing smartreflex node and binding for omap4 ARM: dts: Add missing hwmods property for omap4 dma ARM: dts: Add missing properties for omap4 control modules ARM: dts: Configure pmu without interrupt for omap4430 ARM: dts: Add missing dma hwmods property for omap3
-
Arnd Bergmann authored
Merge tag 'v4.15-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc Pull "Rockchip dts64 updates for 4.15 part1" from Heiko Stübner: The biggest step forward is probably the enablement of display support on the rk3399-firefly, which got its default serial set as well and got cec support as well. Gru boards got their touchpad support refined to actually mark the button correctly and also git their rt5514 dsp added. And finally the rk3328 eval board got its cpu regulator and mmc nodes. * tag 'v4.15-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: enable cec pin for rk3399 firefly arm64: dts: rockchip: add the cec clk for dw-mipi-hdmi on rk3399 arm64: dts: rockchip: default serial for Firefly-RK3399 arm64: dts: rockchip: enable touchpad button for rk3399-gru-kevin arm64: dts: rockchip: enable display subsystem on rk3399-firefly arm64: dts: rockchip: Add rt5514 dsp for rk3399 gru arm64: dts: rockchip: add cpu regulator for rk3328 evaluation board arm64: dts: rockchip: add mmc nodes for rk3328 evaluation board
-
Arnd Bergmann authored
Merge tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc Pull "Rockchip dts32 updates for 4.15 part1" from Heiko Stübner: One new board the Vyasa from Amarula Solutions using a rk3288 and core lvds node for the newly added driver+binding. Also bindings + nodes for the Mali-Utgard GPUs found on some Rockchip socs like rk3036 and rk3188. With the recently revived Lima project they can even render a red triangle to a png file. * tag 'v4.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Enable thermal on rk3288-vyasa board ARM: dts: rockchip: fix mali400 ppmmu interrupt names ARM: dts: rockchip: Enable mali GPU node on rk3288-vyasa ARM: dts: rockchip: enable gpu on rk3188-radxarock ARM: dts: rockchip: add gpu nodes on rk3066/rk3188 ARM: dts: rockchip: add rk322x gpu node ARM: dts: rockchip: enable the gpu on rk3036-kylin boards ARM: dts: rockchip: add rk3036 gpu node dt-bindings: gpu: mali-utgard: add optional power-domain reference dt-bindings: gpu: mali-utgard: add optional supply regulator dt-bindings: gpu: mali-utgard: Add Rockchip Utgard Malis ARM: dts: rockchip: enable vops and hdmi output on rk3288-vyasa ARM: dts: rockchip: Add rk3288 vyasa board dt-bindings: Add vendor prefix for Amarula Solutions ARM: dts: rockchip: add LVDS node for rk3288
-
Arnd Bergmann authored
Merge tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc Pull "STM32 DT updates for v4.15, round 1" from Alexandre Torgue: Highlights: ---------- -Add I2C1 support on STM32F746 SoC -Enable I2C1 on STM32F746 eval board -Add Timers support on STM32F746 SoC -Add USB HS and FS supports on STM32F746 Soc -Enable USB HS on STM32F746 disco and eval boards -Enable USB FS en STM32F746 disco board -Add Vrefbuf to STM32H743 SoC -Add LPTIMERS support on STM32H743 SoC -Add DMAMUX support on STM32H743 SoC -Enable STM32H743 clock driver -Add MDMA support on STM32H743 SoC -Change pinctrl pinmux entries for all SoC. * tag 'stm32-dt-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Add MDMA support for STM32H743 SoC ARM: dts: stm32: Enable USB FS on stm32f746-disco ARM: dts: stm32: Add USB FS support for STM32F746 MCU ARM: dts: stm32: Enable USB HS on stm32f746-disco ARM: dts: stm32: Enable USB HS on stm32746g-eval ARM: dts: stm32: Add USB HS support for STM32F746 MCU ARM: dts: stm32: change pinctrl bindings definition ARM: dts: stm32: Enable STM32H743 clock driver ARM: dts: stm32: fix hse clock frequency on STM32H743 Eval board ARM: dts: stm32: add Timers driver for stm32f746 MCU ARM: dts: stm32: Add DMAMUX support for STM32H743 SoC ARM: dts: stm32: Add lptimer definitions to stm32h743 ARM: dts: stm32: add vrefbuf to stm32h743 ARM: dts: stm32: Add I2C1 support for STM32F746 eval board ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc Pull "Qualcomm Device Tree Changes for v4.15" from Andy Gross: * Add Support for MSM8974 based Fairphone 2 phone * Add support for MSM8974 based Sony Xperia Z2 Tablet * Add MSM8660 GSBI6/7 nodes * Disable GSBI6 at APQ8064 platform level * Fix phy cells on APQ8064 * tag 'qcom-dts-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: msm8974-FP2: Add USB node ARM: dts: msm8974-FP2: Add sdhci1 node ARM: dts: msm8974-FP2: Add regulator nodes for FP2 ARM: dts: msm8974-FP2: Introduce gpio-keys nodes ARM: dts: qcom: Add initial DTS file for Fairphone 2 phone ARM: dts: qcom: add MSM8660 GSBI6 and GSBI7 ARM: dts: qcom: msm8974: Add Sony Xperia Z2 Tablet ARM: dts: qcom-apq8064: disable gsbi6 i2c by default at soc dtsi ARM: dts: qcom-apq8064: Fix dsi and hdmi phy cells
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc Pull "Qualcomm ARM64 Updates for v4.15" from Andy Gross: * Add PCIE support to relevant MSM8996 based boards * Add RPM clock controller node on MSM8996 * Add dload address on MSM8916 and MSM8996 * Add MBHC button support on APQ8016 SBC * Add RTMFS specific compatible for rmtfs memory node * Fixups for MSM8916 GPIO line names and MDP address length * tag 'qcom-arm64-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: msm8916: Mark rmtfs node as qcom, rmtfs-mem compatible arm64: dts: msm8996: Add the rpm clock controller node arm64: dts: qcom: sbc: Name GPIO lines arm64: dts: qcom: msm8916: Shrink mdp address length for msm8916 arm64: dts: apq8016-sbc: add mbhc buttons support arm64: dts: qcom: Specify dload address for msm8916 and msm8996 arm64: dts: apq8096-db820c: never disable regulator on LS expansion arm64: dts: apq8096-db820c: Enable on board 3 pcie root complex arm64: dts: qcom: msm8996: add support to pcie
-
https://github.com/Xilinx/linux-xlnxArnd Bergmann authored
Pull "arm: Xilinx ZynqMP DT changes for v4.15" from Michal Simek: - Change 24c08 compatible string * tag 'zynq-dt-for-4.15' of https://github.com/Xilinx/linux-xlnx: ARM: dts: zynq: Add generic compatible string for I2C EEPROM
-
Arnd Bergmann authored
Merge tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski: 1. Add new board: Hardkernel Odroid HC1. 2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to possible overheat if first pair of A7+A15 cores is idle but rest of CPUs are busy. 3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs. 4. Add power button to Odroid XU3/4. 5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5. 6. Add suspend quirk to DWC3 USB controller to fix enumeration of SuperSpeed devices on Odroid XU4. 7. Add HDMI and MHL to Trats2. 8. Cleanups (redundant properties and nodes). * tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: samsung: Document binding for new Odroid HC1 board ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi ARM: dts: exynos: Add dwc3 SUSPHY quirk ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420 ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards ARM: dts: exynos: Add power button for Odroid XU3/4 ARM: dts: exynos: Remove the display-timing and delay from Rinato ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
-
Arnd Bergmann authored
Merge tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc Pull "DaVinci DT updates for v4.15" from Sekhar Nori: Add support for accessing DSP on DA850 SoC when using device-tree. * tag 'davinci-for-v4.15/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching ARM: dts: da850-lcdk: Add and enable CMA reserved pool for DSP ARM: dts: da850: Add DSP node
-
git://github.com/hisilicon/linux-hisiArnd Bergmann authored
ARM64: DT: Hisilicon SoC DT updates for 4.15 - Add CoreSight related nodes for hi6220 - Add GPIO line names for hikey960 - Rectify the GPIO line names of the Poplar board to keep consistency - Add thermal sensor binding doc and dt nodes for hi3660 * tag 'hisi-arm64-dt-for-4.15' of git://github.com/hisilicon/linux-hisi: arm64: dts: Register Hi3660's thermal sensor dt-bindings: Document the hi3660 thermal sensor binding arm64: dts: hisilicon: Standardize Poplar GPIO line names arm64: dts: hikey960: Update HiKey960 with GPIO line names arm64: dts: hi6220: add coresight dt nodes
-
Linus Walleij authored
The Faraday TVE200 is present in the Gemini SoC, sometimes under the name "TVC". Add it to the SoC DTSI file along with its resources. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc Pull "ARMv8 Vexpress/Juno DT update for v4.15" from Sudeep Holla: Just single update to enable PSCI support on Foundation models * tag 'juno-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: foundation-v8: Enable PSCI mode
-
Arnd Bergmann authored
Merge tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/soc Pull "ASPEED devicetree updates for 4.15" from Joel Stanley: - Cleanups of the ASPEED device trees - Enable the i2c bus on all platforms - Turn VUART on for BMC platforms - Bind watchdog two for compatilbiy with shipping u-boot * tag 'aspeed-4.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed-romulus: Enable VUART ARM: dts: aspeed-palmetto: Enable VUART ARM: dts: aspeed: Enable watchdog two ARM: dts: aspeed: Remove undocumented wdt properties ARM: dts: aspeed: Clean up UART nodes ARM: dts: aspeed: Correctly order UART nodes ARM: dts: aspeed: Add aliases for UARTs ARM: dts: aspeed-ast2500: Add I2C devices ARM: dts: aspeed-palmetto: Add I2C devices ARM: dts: aspeed-romulus: Add I2C devices ARM: dts: aspeed: Add I2C buses ARM: dts: aspeed: Reorder ADC node ARM: dts: aspeed: Move pinctrl subnodes to improve readability
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/soc Pull "SoCFPGA DTS updates for v4.15" from Dinh Nguyen: - Stratix10 platform updates - Fix up gic register entry - Enable ethernet/SDMMC - Update reset manager properties * tag 'socfpga_dts_for_v4.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: add reset property for various peripherals arm64: dts: stratix10: add the 'altr,modrst-off' property arm64: dts: stratix10: include the reset manager bindings arm64: dts: stratix10: add ethernet/sdmmc support to the S10 devkit arm64: dts: stratix10: fix up the gic register for the Stratix10 platform
-
Arnd Bergmann authored
Merge tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC DT Updates for v4.15" from Simon Horman: * r7s72100 (RZ/A1) Peach board - Add pin groups for SCIF2 serial debug interface and Ethernet This avoids relying on bootloader settings - Support control of LED1 using gpio-leds * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs - Add MSIOF[012] support and define aliases for spi[0123] * r8a7743 (RZ/G1M) SoC - Add I2C and IIC core nodes * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers - Add chosen node to allow correct selection of serial console and the kernel command line - Enable RTC support - Enable USB2.0 host support This includes enabling USB PHY and internal PCI * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs - Enable Add SPI NOR support This devices is used to boot up the system to the SoM DT * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM - Enable SDHI0 SD controller supporting high-speed transfers * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform - Add pnctl support for scif4 This avoids reling on boot loader settings - Add EtherAVB support * r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM - Add basic SoM support - Enable MMCIF eMMC support - Enable RTC support - Enable SDHI1 SD controller supporting high-speed transfers * r8a779[0-4] R-Car Gen2 SoCs - Add reset control properties Geert Uytterhoeven says: This patch series describes the reset topology on all R-Car Gen2 Socs, like was done before for R-Car Gen3 and RZ/G1. Resets usually match the corresponding module clocks. Exceptions are: - The audio module has resets for the Serial Sound Interfaces only, - The display module has only a single reset for all DU channels, but adding reset properties for the display is postponed upon request from Laurent. - Convert to new CPG/MSSR bindings Geert Uytterhoven says: Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2, clk-mstp, and clk-div6 drivers, which depend on most clocks being described in DT. Especially the module (MSTP) clocks are cumbersome and error prone, due to 3 arrays (clocks, clock-indices, and clock-output-names) to be kept in sync. In addition, the clk-mstp driver cannot be extended easily to also support module resets, which are provided by the same hardware module. Hence when developing support for R-Car Gen3 SoCs, another approach was chosen, which led to the CPG/MSSR driver core, and SoC-specific subdrivers (initially for R-Car Gen3, but later also for RZ/G1). This series converts the various R-Car Gen2 DTSes to migrate to the new CPG/MSSR drivers that were added in v4.13-rc1. * r8a779[0,1,3,4] R-Car Gen2 SoCs - Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven says: The current practice is to not group clocks under a "clocks" subnode, but just put them together with the other on-SoC devices. Hence this patch series implements this for the various R-Car Gen2 DTSes that still need this (r8a7792.dtsi is OK). * r8a7794 (E2) Alt board - Correct inverted sense of SD wip pins * tag 'renesas-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (48 commits) ARM: dts: r8a7743: Add MSIOF[012] support ARM: dts: r8a7745: Add MSIOF[012] support ARM: dts: iwg22d: Enable SDHI0 controller ARM: dts: iwg22m: Add SPI NOR support ARM: dts: r8a7745: Add QSPI support ARM: dts: iwg20m: Add SPI NOR support ARM: dts: r8a7743: Add QSPI support ARM: dts: iwg22m: Enable SDHI1 controller ARM: dts: r8a7745: Add SDHI controllers ARM: dts: r8a7794: Add reset control properties ARM: dts: r8a7793: Add reset control properties ARM: dts: r8a7792: Add reset control properties ARM: dts: r8a7791: Add reset control properties ARM: dts: r8a7790: Add reset control properties ARM: dts: r8a7743: Add IIC cores to dtsi ARM: dts: alt: use correct logic for SD WP pins ARM: dts: iwg20d-q7: Enable USB PHY ARM: dts: iwg20d-q7: Enable internal PCI ARM: dts: r8a7743: Link PCI USB devices to USB PHY ARM: dts: r8a7743: Add USB PHY DT support ...
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM Based SoC DT Bindings Updates for v4.15" from Simon Horman: * Consistently do not use ';' in documentation of compat strings for boards. A misture of using and not using a trailing ';' had krept in over time with not using being dominant. * Document bindings for - Eagle board and r8a77970 (V3M) SoC bindings. Eagle is a board for the V3M SoC - Document Kingfisher board bindings. Kingfisher is an extension board for the H3ULCB and M3ULCB boards. * Add r8a77970 (V3M) SYSC power domain definitions Add macros usable by the device tree sources to reference r8a77970 SYSC power domains by index. * Add Renesas SoC DT bindings doc to Renesas ARM section of MAINTAINERS file * Drop bogus node name suffix from example of /renesas,dw-hdmi binding * Document APMU and SMP enable method for r8a7745 (RZ/G1E) SoC * tag 'renesas-dt-bindings-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: remove inconsistent ; from documentation arm64: renesas: document Eagle board bindings arm: shmobile: Document Kingfisher board DT bindings dt-bindings: power: add R8A77970 SYSC power domain definitions MAINTAINERS: Add Renesas SoC DT bindings doc to Renesas ARM sections ARM: shmobile: Document R-Car V3M SoC DT bindings dt-bindings: display: renesas: dw-hdmi: Drop bogus node name suffix dt-bindings: apmu: Document r8a7745 support
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Pull "Renesas ARM64 Based SoC DT Updates for v4.15" from Simon Horman: * r8a7795 (H3) - Use r8a7795-cpg-mssr and r8a7795-sysc bindings Hardcoded indicies are replaced with symbols now that they are available - Drop bogus HDMI node name suffixes Laurent Pinchart says: Node names should not use numerical suffixes if the nodes can be distinguished by unit-address - Update PFC node name to pin-controller Shimoda-san says the PFC node name is changed "from e6060000.pfc and pfc@e6060000 to e6060000.pin-controller and pin-controller@e6060000 like other Renesas SoCs." * r8a7795 (H3) ES1.0 - Drop extra zero from XHCI unit address This corrects a typo were ee0400000 rather than ee040000 was used as the unit address. * r8a7796 (M3-W) - Add FDP1 instance Laurent Pinchart says: The r8a7796 has a single FDP1 instance. * r8a7795 (H3) and r8a7796 (M3-W) SoCs - Add USB3.0 peripheral device nodes Shimoda-san says that this is not enabled on the Salvator-X/XS boards for now as: + we need a special cable (USB type-A to A cross cable). + we can swap the role by renesas_usb3 driver even if we use a normal cable and after usb3.0 host is running, but I think it's a special use case. * r8a7795 (H3) and r8a7796 (M3-W) ULCB boards - Enable display output Laurent Pinchart says: The DU is already wired up to the HDMI encoder, all we need to do is enable it. * r8a77995 (D3) Draak board - Enable EthernetAVB and , USB2.0 Host and PHY - Add serial console pins. This is safe to do now that r8a77995 PFC driver support is present * r8a77970 (V3M) - Add basic support for SoC and EtherAVB, [H]SCIF and SYS-DMAC nodes This is a step towards enabling EtherAVB and [H]SCIF with SYS-DMAC in the Eagle board support for which is under review * tag 'renesas-arm64-dt-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) arm64: dts: renesas: r8a7796: add USB3.0 peripheral device node arm64: dts: renesas: r8a7795: add USB3.0 peripheral device node arm64: dts: renesas: r8a77995: draak: enable EthernetAVB arm64: dts: renesas: r8a77995: draak: enable USB2.0 Host (EHCI/OHCI) arm64: dts: renesas: r8a77995: draak: enable USB2.0 PHY arm64: dts: renesas: r8a77995: add USB2.0 Host (EHCI/OHCI) device node arm64: dts: renesas: r8a77995: Add USB2.0 PHY device node arm64: dts: draak: Add serial console pins arm64: dts: renesas: r8a77970: add EtherAVB support arm64: dts: renesas: r8a77970: add [H]SCIF support arm64: dts: renesas: r8a77970: add SYS-DMAC support arm64: dts: renesas: initial R8A77970 SoC device tree arm64: dts: renesas: r8a77995: Add EthernetAVB device node arm64: dts: renesas: r8a77995: add GPIO device nodes arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr binding definitions arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions arm64: renesas: Add Renesas R8A77970 Kconfig support arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes arm64: dts: renesas: ulcb: Enable display output arm64: dts: renesas: r8a77995: update PFC node name to pin-controller ...
-
Arnd Bergmann authored
Merge tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc Pull "DTS updates for the Integrator PCIv3 driver" from Linus Walleij: These are the DTS file changes required to fix bugs and satisfy requirements for the new PCIv3 driver in the PCI subsystem. The binding changes have been merged to the PCI tree. [arnd] Note: this is an incompatible DT binding change, so things will break during bisection or when using an old dtb file. Since integrator has no real users, we can make an exception for that. * tag 'integrator-pciv3-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Update Integrator/AP PCI v3 compatible ARM: dts: integratorap: Fix PCI windows ARM: dts: add the PCI clock to the device tree
-
Rob Herring authored
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm64/boot/dts -type -f -name '*.dts*' Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rob Herring authored
Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by:
-
Surender Polsani authored
"interrupt-parent" property is declared in root node, so it is global to all nodes. This property is re-declared in few sub-nodes. To avoid duplication this property is removed from following sub-nodes: pmu, amba@0, amba@0/ethernet. Signed-off-by:
Surender Polsani <surenderp@techveda.org> Acked-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Mikko Perttunen authored
In Tegra186, the BPMP (Boot and Power Management Processor) implements an interface that is used to read system temperatures, including CPU cluster and GPU temperatures. This binding describes the thermal sensor that is exposed by BPMP. Signed-off-by:
Mikko Perttunen <mperttunen@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com>
-
Hans Verkuil authored
Enable the CEC controller on Jetson TK1 so that it can be used to communicate with CEC devices via the HDMI connector. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Add support for the Tegra CEC IP to the Tegra124 DTSI and link it to the HDMI controller via phandle. Signed-off-by:
-
- 18 Oct, 2017 5 commits
-
-
Fabrizio Castro authored
Add node for xhci. Boards DT files will enable it if needed. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Chen-Yu Tsai authored
Various A10-based development boards have standard HDMI connectors wired to the dedicated HDMI pins on the SoC. Enable the display pipeline and HDMI output on boards I have or have access to schematics: - Cubieboard - Olimex A10-OLinuXino-LIME Signed-off-by:
-
Chen-Yu Tsai authored
All the A20 devices I own have standard HDMI connectors wired to the dedicated HDMI pins on the SoC: - Bananapi M1+ - Cubieboard 2 - Cubietruck - Lamobo R1 (or Bananapi R1) Development boards from Olimex also have standard HDMI connectors. Schematics for them are publicly available. Enable HDMI on them as well. - Olimex A20-OLinuXino-LIME - Olimex A20-OLinuXino-LIME2 - Olimex A20-OLinuXino-MICRO Enable the display pipeline and HDMI output for them. Signed-off-by:
-
Jonathan Liu authored
The A20 has two interconnected display pipelines, mirroring the A10. Add all the device nodes for them, including the downstream HDMI controller that we already support. Signed-off-by:
Jonathan Liu <net147@gmail.com> [wens@csie.org: Squashed in HDMI and provided commit message] Signed-off-by:
-
Chen-Yu Tsai authored
The A10 has two interconnected display pipelines, much like the A31, but without the DRCs between the backend and TCONs. Add all the device nodes for them, including the downstream HDMI controller that we already support. Signed-off-by:
-
