The decompressed kernel initially relies on the identity map set up by
the boot/compressed kernel for accessing things like boot_params. With
the recent introduction of SEV-SNP support, the decompressed kernel
also needs to access the setup_data entries pointed to by
boot_params->hdr.setup_data.

This can lead to a crash in the kexec kernel during early boot due to
these entries not currently being included in the initial identity map,
see thread at Link below.

Include mappings for the setup_data entries in the initial identity map.

  [ bp: Massage commit message and use a helper var for better readability. ]

Fixes: b190a043 ("x86/sev: Add SEV-SNP feature detection/setup")
Reported-by: Jun'ichi Nomura <junichi.nomura@nec.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/TYCPR01MB694815CD815E98945F63C99183B49@TYCPR01MB6948.jpnprd01.prod.outlook.com

Commit in Fixes added the "NOLOAD" attribute to the .brk section as a
"failsafe" measure.

Unfortunately, this leads to the linker no longer covering the .brk
section in a program header, resulting in the kernel loader not knowing
that the memory for the .brk section must be reserved.

This has led to crashes when loading the kernel as PV dom0 under Xen,
but other scenarios could be hit by the same problem (e.g. in case an
uncompressed kernel is used and the initrd is placed directly behind
it).

So drop the "NOLOAD" attribute. This has been verified to correctly
cover the .brk section by a program header of the resulting ELF file.

Fixes: e32683c6 ("x86/mm: Fix RESERVE_BRK() for older binutils")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220630071441.28576-4-jgross@suse.com

The .brk section has the same properties as .bss: it is an alloc-only
section and should be cleared before being used.

Not doing so is especially a problem for Xen PV guests, as the
hypervisor will validate page tables (check for writable page tables
and hypervisor private bits) before accepting them to be used.

Make sure .brk is initially zero by letting clear_bss() clear the brk
area, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com

Instead of clearing the bss area in assembly code, use the clear_bss()
function.

This requires to pass the start_info address as parameter to
xen_start_kernel() in order to avoid the xen_start_info being zeroed
again.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220630071441.28576-2-jgross@suse.com

Pull ARM SoC fixes from Arnd Bergmann:
 "A number of fixes have accumulated, but they are largely for harmless
  issues:

   - Several OF node leak fixes

   - A fix to the Exynos7885 UART clock description

   - DTS fixes to prevent boot failures on TI AM64 and J721s2

   - Bus probe error handling fixes for Baikal-T1

   - A fixup to the way STM32 SoCs use separate dts files for different
     firmware stacks

   - Multiple code fixes for Arm SCMI firmware, all dealing with
     robustness of the implementation

   - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT
     nodes

   - Three updates to the MAINTAINERS file, including Florian Fainelli
     taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz
     Julienne"

* tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom
  arm: mach-spear: Add missing of_node_put() in time.c
  ARM: cns3xxx: Fix refcount leak in cns3xxx_init
  MAINTAINERS: Update email address
  arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode
  arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region
  ARM: dts: bcm2711-rpi-400: Fix GPIO line names
  bus: bt1-axi: Don't print error on -EPROBE_DEFER
  bus: bt1-apb: Don't print error on -EPROBE_DEFER
  ARM: Fix refcount leak in axxia_boot_secondary
  ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15
  soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain
  ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity
  ARM: dts: imx6qdl: correct PU regulator ramp delay
  firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get
  firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary
  firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported
  ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node
  soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
  MAINTAINERS: Update BCM2711/BCM2835 maintainer
  ...

Pull hotfixes from Andrew Morton:
 "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc.

  Fixes for this merge window:

   - fix for a damon boot hang, from SeongJae

   - fix for a kfence warning splat, from Jason Donenfeld

   - fix for zero-pfn pinning, from Alex Williamson

   - fix for fallocate hole punch clearing, from Mike Kravetz

  Fixes for previous releases:

   - fix for a performance regression, from Marcelo

   - fix for a hwpoisining BUG from zhenwei pi"

* tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: add entry for Christian Marangi
  mm/memory-failure: disable unpoison once hw error happens
  hugetlbfs: zero partial pages during fallocate hole punch
  mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py
  mm: re-allow pinning of zero pfns
  mm/kfence: select random number before taking raw lock
  MAINTAINERS: add maillist information for LoongArch
  MAINTAINERS: update MM tree references
  MAINTAINERS: update Abel Vesa's email
  MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer
  MAINTAINERS: add Miaohe Lin as a memory-failure reviewer
  mailmap: add alias for jarkko@profian.com
  mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized
  kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal
  mm: lru_cache_disable: use synchronize_rcu_expedited
  mm/page_isolation.c: fix one kernel-doc comment

Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Enable ignore_missing_thread in 'perf stat', enabling counting with
   '--pid' when threads disappear during counting session setup

 - Adjust output data offset for backward compatibility in 'perf inject'

 - Fix missing free in copy_kcore_dir() in 'perf inject'

 - Fix caching files with a wrong build ID

 - Sync drm, cpufeatures, vhost and svn headers with the kernel

* tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  perf stat: Enable ignore_missing_thread
  perf inject: Adjust output data offset for backward compatibility
  perf trace beauty: Fix generation of errno id->str table on ALT Linux
  perf build-id: Fix caching files with a wrong build ID
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  perf inject: Fix missing free in copy_kcore_dir()

Pull btrfs fixes from David Sterba:

 - zoned relocation fixes:
      - fix critical section end for extent writeback, this could lead
        to out of order write
      - prevent writing to previous data relocation block group if space
        gets low

 - reflink fixes:
      - fix race between reflinking and ordered extent completion
      - proper error handling when block reserve migration fails
      - add missing inode iversion/mtime/ctime updates on each iteration
        when replacing extents

 - fix deadlock when running fsync/fiemap/commit at the same time

 - fix false-positive KCSAN report regarding pid tracking for read locks
   and data race

 - minor documentation update and link to new site

* tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Documentation: update btrfs list of features and link to readthedocs.io
  btrfs: fix deadlock with fsync+fiemap+transaction commit
  btrfs: don't set lock_owner when locking extent buffer for reading
  btrfs: zoned: fix critical section of relocation inode writeback
  btrfs: zoned: prevent allocation from previous data relocation BG
  btrfs: do not BUG_ON() on failure to migrate space when replacing extents
  btrfs: add missing inode updates on each iteration when replacing extents
  btrfs: fix race between reflinking and ordered extent completion

Pull dma-mapping fix from Christoph Hellwig:

 - pass the correct size to dma_set_encrypted() when freeing memory
   (Dexuan Cui)

* tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: use the correct size for dma_set_encrypted()

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments

Pull parisc architecture fixes from Helge Deller:

 - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000
   machines

 - flush all mappings of a shared anonymous page on PA8800/8900 machines
   via flushing the whole data cache. This may slow down such machines
   but makes sure that the cache is consistent

 - Fix duplicate definition build error regarding fb_is_primary_device()

* tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
  parisc: Fix flush_anon_page on PA8800/PA8900
  parisc: align '*' in comment in math-emu code
  parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI

Pull xtensa fixes from Max Filippov:

 - fix OF reference leaks in xtensa arch code

 - replace '.bss' with '.section .bss' to fix entry.S build with old
   assembler

* tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa:
  xtensa: change '.bss' to '.section .bss'
  xtensa: xtfpga: Fix refcount leak bug in setup
  xtensa: Fix refcount leak bug in time.c

Pull powerpc fixes from Michael Ellerman:

 - A fix for a CMA change that broke booting guests with > 2G RAM on
   Power8 hosts.

 - Fix the RTAS call filter to allow a special case that applications
   rely on.

 - A change to our execve path, to make the execve syscall exit
   tracepoint work.

 - Three fixes to wire up our various RNGs earlier in boot so they're
   available for use in the initial seeding in random_init().

 - A build fix for when KASAN is enabled along with
   STRUCTLEAK_BYREF_ALL.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason
Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit
Dubey2, Tyrel Datwyler, and Zi Yan.

* tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: wire up rng during setup_arch
  powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN
  powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
  powerpc: Enable execve syscall exit tracepoint
  powerpc/pseries: wire up rng during setup_arch()
  powerpc/microwatt: wire up rng during setup_arch()
  powerpc/mm: Move CMA reservations after initmem_init()

Merge tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit

 - Update the supported arch list in the LLVM document

 - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS

 - Avoid false __KSYM___this_module define in include/generated/autoksyms.h

* tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: Ignore __this_module in gen_autoksyms.sh
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
  Documentation/llvm: Update Supported Arch table
  modpost: fix section mismatch check for exported init/exit sections

Pull exfat fix from Namjae Jeon:

 - Use updated exfat_chain directly instead of snapshot values in
   rename.

* tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: use updated exfat_chain directly during renaming

Pull cifs client fixes from Steve French:
 "Fixes addressing important multichannel, and reconnect issues.

  Multichannel mounts when the server network interfaces changed, or ip
  addresses changed, uncovered problems, especially in reconnect, but
  the patches for this were held up until recently due to some lock
  conflicts that are now addressed.

  Included in this set of fixes:

   - three fixes relating to multichannel reconnect, dynamically
     adjusting the list of server interfaces to avoid problems during
     reconnect

   - a lock conflict fix related to the above

   - two important fixes for negotiate on secondary channels (null
     netname can unintentionally cause multichannel to be disabled to
     some servers)

   - a reconnect fix (reporting incorrect IP address in some cases)"

* tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update cifs_ses::ip_addr after failover
  cifs: avoid deadlocks while updating iface
  cifs: periodically query network interfaces from server
  cifs: during reconnect, update interface if necessary
  cifs: change iface_list from array to sorted linked list
  smb3: use netname when available on secondary channels
  smb3: fix empty netname context on secondary channels

To pick up the changes from:

  d5af44dd ("x86/sev: Provide support for SNP guest request NAEs")
  0afb6b66 ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs")
  dc3f3d24 ("x86/mm: Validate memory when changing the C-bit")
  cbd3d4f7 ("x86/sev: Check SEV-SNP features support")

That gets these new SVM exit reasons:

+       { SVM_VMGEXIT_PSC,              "vmgexit_page_state_change" }, \
+       { SVM_VMGEXIT_GUEST_REQUEST,    "vmgexit_guest_request" }, \
+       { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \
+       { SVM_VMGEXIT_AP_CREATION,      "vmgexit_ap_creation" }, \
+       { SVM_VMGEXIT_HV_FEATURES,      "vmgexit_hypervisor_feature" }, \

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h

This causes these changes:

  CC      /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o
  LD      /tmp/build/perf-urgent/arch/x86/util/perf-in.o
  LD      /tmp/build/perf-urgent/arch/x86/perf-in.o
  LD      /tmp/build/perf-urgent/arch/perf-in.o
  LD      /tmp/build/perf-urgent/perf-in.o
  LINK    /tmp/build/perf-urgent/perf

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  84d7c8fd ("vhost-vdpa: introduce uAPI to set group ASID")
  2d1fcb77 ("vhost-vdpa: uAPI to get virtqueue group id")
  a0c95f20 ("vhost-vdpa: introduce uAPI to get the number of address spaces")
  3ace88bd ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups")
  175d493c ("vhost: move the backend feature bits to vhost_types.h")

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

To pick up these changes and support them:

  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2022-06-26 12:04:35.982003781 -0300
  +++ after	2022-06-26 12:04:43.819972476 -0300
  @@ -28,6 +28,7 @@
   	[0x74] = "VDPA_SET_CONFIG",
   	[0x75] = "VDPA_SET_VRING_ENABLE",
   	[0x77] = "VDPA_SET_CONFIG_CALL",
  +	[0x7C] = "VDPA_SET_GROUP_ASID",
   };
   static const char *vhost_virtio_ioctl_read_cmds[] = {
   	[0x00] = "GET_FEATURES",
  @@ -39,5 +40,8 @@
   	[0x76] = "VDPA_GET_VRING_NUM",
   	[0x78] = "VDPA_GET_IOVA_RANGE",
   	[0x79] = "VDPA_GET_CONFIG_SIZE",
  +	[0x7A] = "VDPA_GET_AS_NUM",
  +	[0x7B] = "VDPA_GET_VRING_GROUP",
   	[0x80] = "VDPA_GET_VQS_COUNT",
  +	[0x81] = "VDPA_GET_GROUP_NUM",
   };
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gautam Dawar <gautam.dawar@xilinx.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf already support ignore_missing_thread for -p, but not yet
applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread
for `perf stat -p <pid>`.

Committer notes:

And here is a refresher about the 'ignore_missing_thread' knob, from a
previous patch using it:

  ca800068 ("perf evsel: Enable ignore_missing_thread for pid option")

  ---
    While monitoring a multithread process with pid option, perf sometimes
    may return sys_perf_event_open failure with 3(No such process) if any of
    the process's threads die before we open the event. However, we want
    perf continue monitoring the remaining threads and do not exit with
    error.
  ---
Signed-off-by: Gang Li <ligang.bdlg@bytedance.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When 'perf inject' creates a new file, it reuses the data offset from
the input file. If there has been a change on the size of the header, as
happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in
a corrupted output file.

This change adds the function perf_session__data_offset to compute the
data offset based on the current header size, and uses that instead of
the offset from the original input file.
Signed-off-by: Raul Silvera <rsilvera@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.king@intel.com>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

For some reason using:

         cat <<EoFuncBegin
  static const char *errno_to_name__$arch(int err)
  {
         switch (err) {
  EoFuncBegin

In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT
Linux sisyphus (development version), which could be some distro
specific glitch, so just get this done in an alternative way that works
everywhere while giving notice to the people working on that distro to
try and figure our what really took place.

Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Build ID events associate a file name with a build ID.  However, when
using perf inject, there is no guarantee that the file on the current
machine at the current time has that build ID. Fix by comparing the
build IDs and skip adding to the cache if they are different.

Example:

  $ echo "int main() {return 0;}" > prog.c
  $ gcc -o prog prog.c
  $ perf record --buildid-all ./prog
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.019 MB perf.data ]
  $ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; }
  $ file-buildid prog
  444ad9be165d8058a48ce2ffb4e9f55854a3293e
  $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
  444ad9be165d8058a48ce2ffb4e9f55854a3293e
  $ echo "int main() {return 1;}" > prog.c
  $ gcc -o prog prog.c
  $ file-buildid prog
  885524d5aaa24008a3e2b06caa3ea95d013c0fc5

Before:

  $ perf buildid-cache --purge $(pwd)/prog
  $ perf inject -i perf.data -o junk
  $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf
  885524d5aaa24008a3e2b06caa3ea95d013c0fc5
  $

After:

  $ perf buildid-cache --purge $(pwd)/prog
  $ perf inject -i perf.data -o junk
  $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf

  $

Fixes: 454c407e ("perf: add perf-inject builtin")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  d6d0c7f6 ("x86/cpufeatures: Add PerfMonV2 feature bit")
  296d5a17 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts")
  f3090339 ("x86/cpufeatures: Add virtual TSC_AUX feature bit")
  8ad7e8f6 ("x86/fpu/xsave: Support XSAVEC in the kernel")
  59bd54a8 ("x86/tdx: Detect running as a TDX guest in early boot")
  a77d41ac ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Babu Moger <babu.moger@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the changes in:

  ecf8eca5 ("drm/i915/xehp: Add compute engine ABI")
  991b4de3 ("drm/i915/uapi: Add kerneldoc for engine class enum")
  c94fde8f ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES")
  1c671ad7 ("drm/i915/doc: Link query items to their uapi structs")
  a2e54026 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc")
  462ac1cd ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc")
  034d47b2 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB")
  78e1fb31 ("drm/i915/uapi: Add query for hwconfig blob")

That don't add any new ioctl, so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: John Harrison <John.C.Harrison@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Free string allocated by asprintf().

Fixes: d8fc0855 ("perf inject: Keep a copy of kcore_dir")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix a boot crash on a c8000 machine as reported by Dave.  Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org   # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/

Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.

This won't fix all coherency issues with shared mappings but it
seems to work well in practice.  I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.

There is a small preformance hit.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v5.18+

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Module object files can contain an undefined reference to __this_module,
which isn't resolved until we link the final .ko. The kernel doesn't
export this symbol, so ignore it in gen_autoksyms.sh.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Steve Muckle <smuckle@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Ramji Jiyani <ramjiyani@google.com>

If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from
a pristine state, the vmlinux is linked twice.

Commit 3fdc7d3f ("kbuild: link vmlinux only once for
CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix
the issue at all.

Now I realized I had applied a wrong patch.

In v1 patch [1], the autoksyms_recursive target correctly recurses to
"$(MAKE) -f $(srctree)/Makefile autoksyms_recursive".

In v2 patch [2], I accidentally dropped the diff line, and it recurses to
"$(MAKE) -f $(srctree)/Makefile vmlinux".

Restore the code I intended in v1.

[1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/
[2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/

Fixes: 3fdc7d3f ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

Pull IIO driver fixes from Greg KH:
 "Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best
  in his pull request to me, so I'll just quote it here below, as that's
  the only changes we have right now for the char-misc driver tree:

  testing:
      - Fix a missing MODULE_LICENSE() warning by restricting possible
        build configs.

  Various drivers:
      - Fix ordering of iio_get_trigger() being called before
        iio_trigger_register()

  adi,admv1014:
      - Fix dubious x & !y warning.

  adi,axi-adc:
      - Fix missing of_node_put() in error and normal paths.

  aspeed,adc:
      - Add missing of_node_put()

  fsl,mma8452:
      - Fix broken probing from device tree.
      - Drop check on return value of i2c write to device to cause reset
        as ACK will be missing (device reset before sending it).

  fsl,vf610:
      - Fix documentation of in_conversion_mode ABI.

  iio-trig-sysfs:
      - Ensure irq work has finished before freeing the trigger.

  invensense,mpu3050:
      - Disable regulators in error path.

  invensense,icm42600:
      - Fix collision of enum value of 0 with error path where 0 is no
        match.

  renesas,rzg2l_Adc:
      - Add missing fwnode_handle_put() in error path.

  rescale:
      - Fix a boolean logic bug for detection of raw + scale affecting
        an obscure corner case.

  semtech,sx9324:
      - Check return value of read of pin_defs

  st,stm32-adc:
      - Fix interaction across ADC instances for some supported devices.
      - Drop false spurious IRQ messages.
      - Fix calibration value handling. If we can't calibrate don't
        expose the vref_int channel.
      - Fix maximum clock rate for stm32pm15x

  ti,ads131e08:
      - Add missing fwnode_handle_put() in error paths.

  xilinx,ams:
      - Fix variable checked for error from platform_get_irq()

  x-powers,axp288:
      - Overide TS_PIN bias current for boards where it is not correctly
        initialized.

  yamaha,yas530:
      - Fix inverted check on calibration data being all zeros.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  iio:proximity:sx9324: Check ret value of device_property_read_u32_array()
  iio: accel: mma8452: ignore the return value of reset operation
  iio: adc: stm32: fix maximum clock rate for stm32mp15x
  iio: adc: stm32: fix vrefint wrong calibration value handling
  iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value)
  iio: adc: vf610: fix conversion mode sysfs node name
  iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client
  iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m
  iio:humidity:hts221: rearrange iio trigger get and register
  iio:chemical:ccs811: rearrange iio trigger get and register
  iio:accel:mxc4005: rearrange iio trigger get and register
  iio:accel:kxcjk-1013: rearrange iio trigger get and register
  iio:accel:bma180: rearrange iio trigger get and register
  iio: afe: rescale: Fix boolean logic bug
  iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data
  iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message
  iio: adc: stm32: Fix ADCs iteration in irq handler
  iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels()
  iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties()
  iio: trigger: sysfs: fix use-after-free on remove
  ...

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 5.19-rc4
  for a few small reported issues. They include:

   - new usb-serial driver ids

   - MAINTAINERS file update to properly catch the USB dts files

   - dt-bindings fixes for reported build warnings

   - xhci driver fixes for reported problems

   - typec Kconfig dependancy fix

   - raw_gadget fuzzing fixes found by syzbot

   - chipidea driver bugfix

   - usb gadget uvc bugfix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: chipidea: udc: check request status before setting device address
  USB: gadget: Fix double-free bug in raw_gadget driver
  xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI
  xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI
  xhci: turn off port power in shutdown
  xhci: Keep interrupt disabled in initialization until host is running.
  USB: serial: option: add Quectel RM500K module support
  USB: serial: option: add Quectel EM05-G modem
  USB: serial: pl2303: add support for more HXN (G) types
  usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC
  usb: gadget: uvc: fix list double add in uvcg_video_pump
  dt-bindings: usb: ehci: Increase the number of PHYs
  dt-bindings: usb: ohci: Increase the number of PHYs
  usb: gadget: Fix non-unique driver names in raw-gadget driver
  MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM
  USB: serial: option: add Telit LE910Cx 0x1250 composition

Merge tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Some bug fixes and a trivial cleanup"

* tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Make compute_return_era() return void
  LoongArch: Fix wrong fpu version
  LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler()
  LoongArch: Fix sleeping in atomic context in setup_tlb_handler()
  LoongArch: Fix the _stext symbol address
  LoongArch: Fix the !THP build

Pull f2fs fixes from Jaegeuk Kim:
 "Some urgent fixes to avoid generating corrupted inodes caused by
  compressed and inline_data files.

  In addition, avoid a wrong error report which prevents a roll-forward
  recovery"

* tag 'f2fs-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: do not count ENOENT for error case
  f2fs: fix iostat related lock protection
  f2fs: attach inline_data after setting compression

compute_return_era() always returns 0, make it return void,
and then no need to check its return value for its callers.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

According to the configuration information accessible by the CPUCFG
instruction in LoongArch Reference Manual [1], FP_ver is stored in
bit [5: 3] of CPUCFG2, the current code to get fpu version is wrong,
use CPUCFG2_FPVERS to fix it.

[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html

Fixes: 628c3bb4 ("LoongArch: Add boot and setup routines")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

setup_tlb_handler() is expected to set per-cpu exception handlers, but
it only set the TLBRENTRY successfully because of copy & paste errors,
so fix it.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Since setup_tlb_handler() is executed in atomic context, we should use
GFP_ATOMIC instead of GFP_KERNEL to alloc pages. Otherwise we will get
a "sleeping in atomic context" error:

[    0.013118] BUG: sleeping function called from invalid context at mm/page_alloc.c:5158
[    0.013126] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
[    0.013131] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19-rc3+ #1008 1a223086d14d07967cc427f15d52139422271360
[    0.013136] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    0.013140] Stack : 90000000015fc990 9000000100493c18 9000000000df3370 9000000100490000
[    0.013151]         9000000100493b50 0000000000000000 9000000100493b58 9000000001417ef0
[    0.013160]         900000000199e54e 0000000000000040 9000000100493c18 90000000015f7a98
[    0.013168]         ffffffffffffffff 6de72f8b42179d1e 9000000100403b80 90000000015f7890
[    0.013176]         0000000000000001 00000000fffff175 9000000000eb9860 9000000001530b4b
[    0.013184]         9000000000e99e60 0000000000000013 0000000006ecc000 0000000000000001
[    0.013193]         90000000015f7a98 9000000001417ef0 0000000000000004 0000000000000000
[    0.013201]         0000000000000cc0 0000000000000000 0000000000000001 90000000015fc990
[    0.013209]         9000000000217e74 9000000001603b6b 9000000000208640 0000000000000000
[    0.013217]         00000000000000b0 0000000000000004 0000000000000000 0000000000070000
[    0.013225]         ...
[    0.013229] Call Trace:
[    0.013230] [<9000000000208640>] show_stack+0x4c/0x14c
[    0.013240] [<9000000000df3370>] dump_stack_lvl+0x70/0xac
[    0.013246] [<9000000000270c8c>] ___might_sleep+0x104/0x124
[    0.013253] [<9000000000477e84>] __alloc_pages+0x240/0x464
[    0.013260] [<9000000000214214>] setup_tlb_handler+0x104/0x1e8
[    0.013265] [<9000000000214324>] tlb_init+0x2c/0x3c
[    0.013270] [<9000000000208b74>] per_cpu_trap_init+0xec/0x108
[    0.013275] [<9000000000202850>] cpu_probe+0x400/0x8a4
[    0.013279] [<900000000020d160>] start_secondary+0x5c/0x3d4
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

_stext means the start of .text section (see __is_kernel_text()), but we
put its definition in .ref.text by mistake. Fix it by defining it in the
vmlinux.lds.S.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>