* for-5.19/io_uring-socket:
  io_uring: use the text representation of ops in trace
  io_uring: rename op -> opcode
  io_uring: add io_uring_get_opcode
  io_uring: add type to op enum
  io_uring: add socket(2) support
  net: add __sys_socket_file()
  io_uring: fix trace for reduced sqe padding
  io_uring: add fgetxattr and getxattr support
  io_uring: add fsetxattr and setxattr support
  fs: split off do_getxattr from getxattr
  fs: split off setxattr_copy and do_setxattr function from setxattr

* for-5.19/io_uring: (85 commits)
  io_uring: don't clear req->kbuf when buffer selection is done
  io_uring: eliminate the need to track provided buffer ID separately
  io_uring: move provided buffer state closer to submit state
  io_uring: move provided and fixed buffers into the same io_kiocb area
  io_uring: abstract out provided buffer list selection
  io_uring: never call io_buffer_select() for a buffer re-select
  io_uring: get rid of hashed provided buffer groups
  io_uring: always use req->buf_index for the provided buffer group
  io_uring: ignore ->buf_index if REQ_F_BUFFER_SELECT isn't set
  io_uring: kill io_rw_buffer_select() wrapper
  io_uring: make io_buffer_select() return the user address directly
  io_uring: kill io_recv_buffer_select() wrapper
  io_uring: use 'sr' vs 'req->sr_msg' consistently
  io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg
  io_uring: check IOPOLL/ioprio support upfront
  io_uring: replace smp_mb() with smp_mb__after_atomic() in io_sq_thread()
  io_uring: add IORING_SETUP_TASKRUN_FLAG
  io_uring: use TWA_SIGNAL_NO_IPI if IORING_SETUP_COOP_TASKRUN is used
  io_uring: set task_work notify method at init time
  io-wq: use __set_notify_signal() to wake workers
  ...

It's not needed as the REQ_F_BUFFER_SELECTED flag tracks the state of
whether or not kbuf is valid, so just drop it.
Suggested-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have io_kiocb->buf_index which is used for either fixed buffers, or
for provided buffers. For the latter, it's used to hold the buffer group
ID for buffer selection. Post selection, req->kbuf->bid is used to get
the buffer ID.

Store the buffer ID, when selected, in req->buf_index. If we do end up
recycling the buffer, reset it back to the buffer group ID.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The timeout and other items that follow are less hot, so let's move the
provided buffer state above that.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

These are mutually exclusive - if you use provided buffers, then you
cannot use fixed buffers and vice versa. Move them into the same spot
in the io_kiocb, which is also advantageous for provided buffers as
they get near the submit side hot cacheline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In preparation for providing another way to select a buffer, move the
existing logic into a helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Callers already have room to store the addr and length information,
clean it up by having the caller just assign the previously provided
data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use a plain array for any group ID that's less than 64, and punt
anything beyond that to an xarray. 64 fits in a page even for 4KB
page sizes and with the planned additions.

This makes the expected group usage faster by avoiding a hash and lookup
to find our list, and it uses less memory upfront by not allocating any
memory for provided buffers unless it's actually being used.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The read/write opcodes use it already, but the recv/recvmsg do not. If
we switch them over and read and validate this at init time while we're
checking if the opcode supports it anyway, then we can do it in one spot
and we don't have to pass in a separate group ID for io_buffer_select().
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's no point in validity checking buf_index if the request doesn't
have REQ_F_BUFFER_SELECT set, as we will never use it for that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

After the recent changes, this is direct call to io_buffer_select()
anyway. With this change, there are no wrappers left for provided
buffer selection.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's no point in having callers provide a kbuf, we're just returning
the address anyway.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull parisc architecture fixes from Helge Deller:
 "Some reverts of existing patches, which were necessary because of boot
  issues due to wrong CPU clock handling and cache issues which led to
  userspace segfaults with 32bit kernels. Dave has a whole bunch of
  upcoming cache fixes which I then plan to push in the next merge
  window.

  Other than that just small updates and fixes, e.g. defconfig updates,
  spelling fixes, a clocksource fix, boot topology fixes and a fix for
  /proc/cpuinfo output to satisfy lscpu"

* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  Revert "parisc: Increase parisc_cache_flush_threshold setting"
  parisc: Mark cr16 clock unstable on all SMP machines
  parisc: Fix typos in comments
  parisc: Change MAX_ADDRESS to become unsigned long long
  parisc: Merge model and model name into one line in /proc/cpuinfo
  parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
  parisc: Update 32- and 64-bit defconfigs
  parisc: Only list existing CPUs in cpu_possible_mask
  Revert "parisc: Fix patch code locking and flushing"
  Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
  Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"

Pull powerpc fixes from Michael Ellerman:

 - Fix the DWARF CFI in our VDSO time functions, allowing gdb to
   backtrace through them correctly.

 - Fix a buffer overflow in the papr_scm driver, only triggerable by
   hypervisor input.

 - A fix in the recently added QoS handling for VAS (used for
   communicating with coprocessors).

Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.

* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
  powerpc/vdso: Fix incorrect CFI in gettimeofday.S
  powerpc/pseries/vas: Use QoS credits from the userspace

Pull x86 fix from Thomas Gleixner:
 "A fix and an email address update:

   - Prevent FPU state corruption.

     The condition in irq_fpu_usable() grants FPU usage when the FPU is
     not used in the kernel. That's just wrong as it does not take the
     fpregs_lock()'ed regions into account. If FPU usage happens within
     such a region from interrupt context, then the FPU state gets
     corrupted.

     That's a long standing bug, which got unearthed by the recent
     changes to the random code.

   - Josh wants to use his kernel.org email address"

* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Prevent FPU state corruption
  MAINTAINERS: Update Josh Poimboeuf's email address

Pull timer fix from Thomas Gleixner:
 "A fix and an email address update:

   - Mark the NMI safe time accessors notrace to prevent tracer
     recursion when they are selected as trace clocks.

   - John Stultz has a new email address"

* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Mark NMI safe time accessors as notrace
  MAINTAINERS: Update email address for John Stultz

This reverts commit a58e9d09.

Triggers segfaults with 32-bit kernels on PA8500 machines.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull irq fix from Thomas Gleixner:
 "A fix for the threaded interrupt core.

  A quick sequence of request/free_irq() can result in a hang because
  the interrupt thread did not reach the thread function and got stopped
  in the kthread core already. That leaves a state active counter
  arround which makes a invocation of synchronized_irq() on that
  interrupt hang forever.

  Ensure that the thread reached the thread function in request_irq() to
  prevent that"

* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Synchronize interrupt thread startup

Pull locking fixlet from Thomas Gleixner:
 "Just a email address update for MAINTAINERS and mailmap"

* tag 'locking-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: MAINTAINERS, .mailmap: Update André's email address

The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
Signed-off-by: Helge Deller <deller@gmx.de>

Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>

Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
	MAX_ADDRESS   (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>

The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org

In commit 62773112 ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 62773112 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY")
Signed-off-by: Helge Deller <deller@gmx.de>

Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and
enable CONFIG_NAMESPACES and CONFIG_USER_NS.
Signed-off-by: Helge Deller <deller@gmx.de>

The inventory knows which CPUs are in the system, so this bitmask should
be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS.

Reset the cpu_possible_mask before scanning the system for CPUs, and
mark each existing CPU as possible during initialization of that CPU.

This avoids those warnings later on too:

 register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>

This reverts commit a9fe7fa7.

Leads to segfaults on 32bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>

This reverts commit d97180ad.

It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+

This reverts commit afdb4a5b.

It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.16+

Pull PASID fix from Thomas Gleixner:
 "A single bugfix for the PASID management code, which freed the PASID
  too early. The PASID needs to be tied to the mm lifetime, not to the
  address space lifetime"

* tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm: Fix PASID use-after-free issue

Pull sound fixes from Takashi Iwai:
 "This became slightly larger as I've been off in the last weeks.

  The majority of changes here is about ASoC, fixes for dmaengine
  and for addressing issues reported by CI, as well as other
  device-specific small fixes.

  Also, fixes for FireWire core stack and the usual HD-audio quirks
  are included"

* tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
  ASoC: ops: Validate input values in snd_soc_put_volsw_range()
  ASoC: dmaengine: Restore NULL prepare_slave_config() callback
  ASoC: atmel: mchp-pdmc: set prepare_slave_config
  ASoC: max98090: Generate notifications on changes for custom control
  ASoC: max98090: Reject invalid values in custom control put()
  ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
  ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
  firewire: core: extend card->lock in fw_core_handle_bus_reset
  firewire: remove check of list iterator against head past the loop body
  firewire: fix potential uaf in outbound_phy_packet_callback()
  ASoC: rt9120: Correct the reg 0x09 size to one byte
  ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
  ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
  ASoC: meson: axg-card: Fix nonatomic links
  ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
  ASoC: soc-ops: fix error handling
  ASoC: meson: Fix event generation for G12A tohdmi mux
  ASoC: meson: Fix event generation for AUI CODEC mux
  ASoC: meson: Fix event generation for AUI ACODEC mux
  ...

The last two users were floppy.c and ataflop.c respectively, it was
verified that no other drivers makes use of this, so let's remove it.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Denis Efremov <efremov@linux.com>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the last driver making use of fd_request->error_count, which is
easy to get wrong as was shown in floppy.c.  We don't need to keep it
there, it can be moved to the atari_floppy_struct instead, so let's do
this.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Minh Yuan <yuanmingbuaa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.18

A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems.  The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.

Pull gpio fixes from Bartosz Golaszewski:

 - fix the bounds check for the 'gpio-reserved-ranges' device property
   in gpiolib-of

 - drop the assignment of the pwm base number in gpio-mvebu (this was
   missed by the patch doing it globally for all pwm drivers)

 - fix the fwnode assignment (use own fwnode, not the parent's one) for
   the GPIO irqchip in gpio-visconti

 - update the irq_stat field before checking the trigger field in
   gpio-pca953x

 - update GPIO entry in MAINTAINERS

* tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
  gpio: visconti: Fix fwnode of GPIO IRQ
  MAINTAINERS: update the GPIO git tree entry
  gpio: mvebu: drop pwm base assignment
  gpiolib: of: fix bounds check for 'gpio-reserved-ranges'

Pull block fixes from Jens Axboe:
 "A single revert for a change that isn't needed in 5.18, and a small
  series for s390/dasd"

* tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
  s390/dasd: Use kzalloc instead of kmalloc/memset
  s390/dasd: Fix read inconsistency for ESE DASD devices
  s390/dasd: Fix read for ESE with blksize < 4k
  s390/dasd: prevent double format of tracks for ESE devices
  s390/dasd: fix data corruption for ESE devices
  Revert "block: release rq qos structures for queue without disk"

Pull io_uring fix from Jens Axboe:
 "Just a single file assignment fix this week"

* tag 'io_uring-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
  io_uring: assign non-fixed early for async work