- 31 Jul, 2018 10 commits
-
-
Finn Thain authored
Replace an open-coded ffs() with the function call. Simplify an if-else cascade using a switch statement. Correct a typo and an indentation issue. Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Finn Thain authored
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver. Tested-by:
-
Finn Thain authored
Don't load the via-pmu68k driver on early PowerBooks. The M50753 PMU device found in those models was never supported by this driver. Attempting to load the driver usually causes a boot hang. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Acked-by:
-
Finn Thain authored
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbols with implicit deps on PPC_PMAC will need explicit deps. Add them now. No functional change. Tested-by:
-
Finn Thain authored
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch, battery and suspend code. Add the necessary interrupt handling to support m68k PowerBooks. The pmu_kind value is available to userspace using the PMU_IOC_GET_MODEL ioctl. It is not clear yet what hardware classes are be needed to describe m68k PowerBook models, so pmu_kind is given the provisional value PMU_UNKNOWN. To find out about the hardware, user programs can use /proc/bootinfo or /proc/hardware, or send the PMU_GET_VERSION command using /dev/adb. Tested-by:
-
Finn Thain authored
On most PowerPC Macs, the PMU driver uses the shift register and IO port B from a single VIA chip. On 68k and early PowerPC PowerBooks, the driver uses the shift register from one VIA chip together with IO port B from another. Replace via with via1 and via2 to accommodate this. For the CONFIG_PPC_PMAC case, set via1 = via2 so there is no change. Tested-by:
-
Finn Thain authored
On 68k Macs, the via/vias pointer can't be used to determine whether the PMU driver has been initialized. For portability, add a new state to indicate that via_find_pmu() succeeded. After via_find_pmu() executes, testing vias == NULL is equivalent to testing via == NULL. Replace these tests with pmu_state == uninitialized which is simpler and more consistent. No functional change. Tested-by:
-
Finn Thain authored
The shift register interrupt flag gets cleared in via_pmu_interrupt() and once again in pmu_sr_intr(). Fix this theoretical race condition. Tested-by:
-
Finn Thain authored
Add missing in_8() accessors to init_pmu() and pmu_sr_intr(). This fixes several sparse warnings: drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression Tested-by:
-
Finn Thain authored
The pmu_init() function has the __init qualifier, but the ops struct that holds a pointer to it does not. This causes a build warning. The driver works fine because the pointer is only dereferenced early. The function is so small that there's negligible benefit from using the __init qualifier. Remove it to fix the warning, consistent with the other ADB drivers. Tested-by:
-
- 30 Jul, 2018 16 commits
-
-
Alexey Spirkov authored
mmu_init_secondary() calls ppc44x_pin_tlb() which is marked __init, leading to a warning: The function mmu_init_secondary() references the function __init ppc44x_pin_tlb(). There's no CPU hotplug support on 44x so mmu_init_secondary() will only be called at boot. Therefore we should mark it as __init. Signed-off-by:
Alexey Spirkov <alexeis@astrosoft.ru> [mpe: Flesh out change log details] Signed-off-by:
-
Michael Ellerman authored
Paul Menzel reported that kmemleak was producing reports such as: unreferenced object 0xc0000000f8b80000 (size 16384): comm "init", pid 1, jiffies 4294937416 (age 312.240s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d997deb7>] __pud_alloc+0x80/0x190 [<0000000087f2e8a3>] move_page_tables+0xbac/0xdc0 [<00000000091e51c2>] shift_arg_pages+0xc0/0x210 [<00000000ab88670c>] setup_arg_pages+0x22c/0x2a0 [<0000000060871529>] load_elf_binary+0x41c/0x1648 [<00000000ecd9d2d4>] search_binary_handler.part.11+0xbc/0x280 [<0000000034e0cdd7>] __do_execve_file.isra.13+0x73c/0x940 [<000000005f953a6e>] sys_execve+0x58/0x70 [<000000009700a858>] system_call+0x5c/0x70 Indicating that a PUD was being leaked. However what's really happening is that kmemleak is not able to recognise the references from the PGD to the PUD, because they are not fully qualified pointers. We can confirm that in xmon, eg: Find the task struct for pid 1 "init": 0:mon> P task_struct ->thread.ksp PID PPID S P CMD c0000001fe7c0000 c0000001fe803960 1 0 S 13 systemd Dump virtual address 0 to find the PGD: 0:mon> dv 0 c0000001fe7c0000 pgd @ 0xc0000000f8b01000 Dump the memory of the PGD: 0:mon> d c0000000f8b01000 c0000000f8b01000 00000000f8b90000 0000000000000000 |................| c0000000f8b01010 0000000000000000 0000000000000000 |................| c0000000f8b01020 0000000000000000 0000000000000000 |................| c0000000f8b01030 0000000000000000 00000000f8b80000 |................| ^^^^^^^^^^^^^^^^ There we can see the reference to our supposedly leaked PUD. But because it's missing the leading 0xc, kmemleak won't recognise it. We can confirm it's still in use by translating an address that is mapped via it: 0:mon> dv 7fff94000000 c0000001fe7c0000 pgd @ 0xc0000000f8b01000 pgdp @ 0xc0000000f8b01038 = 0x00000000f8b80000 <-- pudp @ 0xc0000000f8b81ff8 = 0x00000000037c4000 pmdp @ 0xc0000000037c5ca0 = 0x00000000fbd89000 ptep @ 0xc0000000fbd89000 = 0xc0800001d5ce0386 Maps physical address = 0x00000001d5ce0000 Flags = Accessed Dirty Read Write The fix is fairly simple. We need to tell kmemleak to ignore PUD allocations and never report them as leaks. We can also tell it not to scan the PGD, because it will never find pointers in there. However it will still notice if we allocate a PGD and then leak it. Reported-by:Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Christophe Leroy authored
Split asm/tlbflush.h into: asm/nohash/tlbflush.h asm/book3s/32/tlbflush.h asm/book3s/64/tlbflush.h (already existing) Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
asm/tlbflush.h is only needed for: - using functions xxx_flush_tlb_xxx() - using MMU_NO_CONTEXT - including asm-generic/pgtable.h Signed-off-by:
-
Christophe Leroy authored
mmu-44x.h doesn't need asm/page.h if PAGE_SHIFT are replaced by CONFIG_PPC_XX_PAGES Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
Christophe Leroy authored
Remove superflous includes and add missing ones Signed-off-by:
-
Christophe Leroy authored
PPC_PIN_SIZE is specific to the 44x and is defined in mmu.h Signed-off-by:
-
Christophe Leroy authored
set_breakpoint() is only used in process.c so make it static Signed-off-by:
-
Christophe Leroy authored
Files not using fixmap consts or functions don't need asm/fixmap.h Signed-off-by:
-
Christophe Leroy authored
files not using feature fixup don't need asm/feature-fixups.h files using feature fixup need asm/feature-fixups.h Signed-off-by:
-
Christophe Leroy authored
Only include linux/stringify.h is files using __stringify() Signed-off-by:
-
Christophe Leroy authored
This patch moves ASM_CONST() and stringify_in_c() into dedicated asm-const.h, then cleans all related inclusions. Signed-off-by:
-
Christophe Leroy authored
Signed-off-by:
-
Christophe Leroy authored
Files not using cpu_has_feature() don't need cpu_has_feature.h Signed-off-by:
-
Christophe Leroy authored
page.h doesn't need kdump.h Signed-off-by:
-
- 24 Jul, 2018 14 commits
-
-
Nicholas Piggin authored
This delay was in the very first OPAL console commit 6.5 years ago, and came from the vio hvc driver. The firmware console has hardened sufficiently to remove it. Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
The RAW console does not need writes to be atomic, so relax opal_put_chars to be able to do partial writes, and implement an _atomic variant which does not take a spinlock. This API is used in xmon, so the less locking that is used, the better chance there is that a crash can be debugged. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Nicholas Piggin authored
OPAL console writes do not have to synchronously flush firmware / hardware buffers unless they are going through the udbg path. Remove the unconditional flushing from opal_put_chars. Flush if there was no space in the buffer as an optimisation (callers loop waiting for success in that case). udbg flushing is moved to udbg_opal_putc. Signed-off-by:
-
Nicholas Piggin authored
opal_put_chars deals with partial writes because in OPALv1, opal_console_write_buffer_space did not work correctly. That firmware is not supported. This reworks the opal_put_chars code to no longer deal with partial writes by turning them into full writes. Partial write handling is still supported in terms of what gets returned to the caller, but it may not go to the console atomically. A warning message is printed in this case. This allows console flushing to be moved out of the opal_write_lock spinlock. That could cause the lock to be held for long periods if the console is busy (especially if it was being spammed by firmware), which is dangerous because the lock is taken by xmon to debug the system. Flushing outside the lock improves the situation a bit. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Nicholas Piggin authored
A new console flushing firmware API was introduced to replace event polling loops, and implemented in opal-kmsg with affddff6 ("powerpc/powernv: Add a kmsg_dumper that flushes console output on panic"), to flush the console in the panic path. The OPAL console driver has other situations where interrupts are off and it needs to flush the console synchronously. These still use a polling loop. So move the opal-kmsg flush code to opal_flush_console, and use the new function in opal-kmsg and opal_put_chars. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
Russell Currey <ruscur@russell.cc> Signed-off-by:
-
Nicholas Piggin authored
Use the more refined and tested event polling loop from opal_put_chars as the fallback console flush in the opal-kmsg path. This loop is used by the console driver today, whereas the opal-kmsg fallback is not likely to have been used for years. Use WARN_ONCE rather than a printk when the fallback is invoked to prepare for moving the console flush into a common function. Reviewed-by:
-
Nicholas Piggin authored
OPAL_CONSOLE_FLUSH is documented as being able to return OPAL_BUSY, so implement the standard OPAL_BUSY handling for it. Reviewed-by:
-
Nicholas Piggin authored
The OPAL console driver does not delay in case it gets OPAL_BUSY or OPAL_BUSY_EVENT from firmware. It can't yet be made to sleep because it is called under spinlock, but it can be changed to the standard OPAL_BUSY loop form, and a delay added to keep it from hitting the firmware too frequently. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Nicholas Piggin authored
The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by:
-
Mukesh Ojha authored
Fixes: 8034f715 ("powernv/opal-dump: Convert to irq domain") Converts all the return explicit number to a more proper IRQ_HANDLED, which looks proper incase of interrupt handler returning case. Here, It also removes error message like "nobody cared" which was getting unveiled while returning -1 or 0 from handler. Signed-off-by:
Mukesh Ojha <mukesh02@linux.vnet.ibm.com> Reviewed-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
-
Mukesh Ojha authored
Moves the return value check of 'opal_dump_info' to a proper place which was previously unnecessarily filling all the dump info even on failure. Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Acked-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
Cyril Bur authored
Since commit dc310669 ("powerpc: tm: Always use fp_state and vr_state to store live registers") tm_reclaim_thread() doesn't use the parameter anymore, both callers have to bother getting it as they have no need for a struct thread_info either. Just remove it and adjust the callers. Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Cyril Bur authored
In commit eb5c3f1c ("powerpc: Always save/restore checkpointed regs during treclaim/trecheckpoint") __tm_recheckpoint was modified to no longer take the second parameter 'unsigned long orig_msr' as part of a TM rewrite to simplify the reclaiming/recheckpointing process. There is a comment in the asm file where the function is delcared which has an incorrect prototype with the 'orig_msr' parameter. This patch corrects the comment. Signed-off-by:
-
Simon Guo authored
This patch reworked selftest memcmp_64 so that memcmp selftest can cover more test cases. It adds testcases for: - memcmp over 4K bytes size. - s1/s2 with different/random offset on 16 bytes boundary. - enter/exit_vmx_ops pairness. Signed-off-by:
Simon Guo <wei.guo.simon@gmail.com> [mpe: Add -maltivec to fix build on some toolchains] Signed-off-by:
-
