- 02 Jan, 2024 4 commits
-
-
Gergo Koteles authored
The 14ARB7 has two tas2563 amplifier on i2c. Connect it to the tas2781 driver. Signed-off-by:
Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.huSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
Gergo Koteles authored
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7 laptop. It has two TAS2563 amplifier. Add the PNP ID and calibration functions to handle them. ACPI excerpt: Scope (_SB.I2CD) { Device (TAS) { Name (_HID, "INT8866") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0020 } }) Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Signed-off-by: -
Gergo Koteles authored
Make the global i2c address configurable to support compatible amplifiers with different global i2c address. Signed-off-by:
-
Gergo Koteles authored
Make calibration functions configurable to support different calibration data storage modes. Signed-off-by:
-
- 30 Dec, 2023 5 commits
-
-
Takashi Iwai authored
Pull CS35L41 codec updates for Lenovo laptops. Signed-off-by: -
Dorian Cruveiller authored
Add driver properties on 4 models of this laptop serie since they don't have _DSD in the ACPI table Signed-off-by:
Dorian Cruveiller <doriancruveiller@gmail.com> Cc: <stable@vger.kernel.org> # v6.7 Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.comSigned-off-by:
-
Dorian Cruveiller authored
Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are 16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids). Subsystem ids list: - 17AA38B4 - 17AA38B5 - 17AA38B6 - 17AA38B7 Signed-off-by:
-
Gergo Koteles authored
Make the amp available immediately after a module load to avoid having to wait for a PCM hook action. (eg. unloading & loading the module while listening music) Signed-off-by:
-
Greg Kroah-Hartman authored
Now that the driver core can properly handle constant struct bus_type, move all of the sound subsystem struct bus_type structures as const, placing them into read-only memory which can not be modified at runtime. Note, this fixes a duplicate definition of ac97_bus_type, which somehow was declared extern in a .h file, and then static as a prototype in a .c file, and then properly later on in the same .c file. Amazing that no compiler warning ever showed up for this. Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Dawei Li <set_pte_at@outlook.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: linux-sound@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkhSigned-off-by:
-
- 29 Dec, 2023 31 commits
-
-
Takashi Iwai authored
Pull Scarlett2 USB audio mixer extensions. Signed-off-by: -
Geoffrey D. Bennett authored
When the Direct button on the Solo Gen 4 is held for 3 seconds, the PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer Outputs E and F. This patch adds the corresponding ALSA control. Signed-off-by:
Geoffrey D. Bennett <g@b4.vu> Signed-off-by:
-
Geoffrey D. Bennett authored
Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config sets, and device info data. Signed-off-by:
-
Geoffrey D. Bennett authored
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition to a R/O master volume control (which is already supported). Mark the new scarlett2_notify_volume() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by:
-
Geoffrey D. Bennett authored
Early firmware for the Scarlett Gen 4 devices has sufficient differences that it is better to enforce a minimum firmware version than to try and work around those differences. Add a minimum firmware version field to the device info struct, and display a message if the firmware version is too old. Only create the Firmware Version and MSD (optional) controls in this case. Signed-off-by:
-
Geoffrey D. Bennett authored
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the ALSA controls would refer to them "Mix X" and "Mixer Input X". This patch fixes them to be called "DSP X" and "DSP Input X". Signed-off-by:
-
Geoffrey D. Bennett authored
The DSP mux channels in the Scarlett 4th Gen appear as SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer controls. Add a dsp_count option to the device info struct to exclude those DSP channels from the num_mix_in/num_mix_out counts. Signed-off-by:
-
Geoffrey D. Bennett authored
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces are configurable. This patch adds ALSA controls for the gains which are copied to the mixer when Direct Monitor is enabled. Signed-off-by:
-
Geoffrey D. Bennett authored
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces is used, the Mix A and B gains are updated by the interface. This patch calls snd_ctl_notify() for the ALSA mix controls when a Direct Monitor notification is received. Signed-off-by:
-
Geoffrey D. Bennett authored
The Scarlett 4th Gen small interfaces have a software-controllable mixer like the large 2nd and 3rd Gen interfaces do. Pressing the "Direct" button on the interface updates the mixer controls, which this driver hasn't needed to deal with previously. This commit stores the ALSA mixer controls, and adds a mix_updated flag so that the controls can be updated when a notification is received. Signed-off-by:
-
Geoffrey D. Bennett authored
Add a control to retrieve the power status from the interface (bus-powered, external-powered, or insufficient power). Mark the new scarlett2_notify_power_status() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by:
-
Geoffrey D. Bennett authored
When phantom power is enabled or disabled, the autogain control cannot be enabled until the interface has signalled that the change is complete and the input is unmuted. Update those controls to be read-only during this time. Signed-off-by:
-
Geoffrey D. Bennett authored
While the autogain function is running, the other input controls (select, link, gain, safe, level, air, and phantom) can't be modified. Update those controls to be read-only during this time. Signed-off-by:
-
Geoffrey D. Bennett authored
Create local variable for storing private data pointer in snd_scarlett2_controls_create(). It's currently only used for checking msd_switch, but it will be used again. Signed-off-by:
-
Geoffrey D. Bennett authored
Some devices in the Scarlett Gen 4 series have support for software-controllable input gain. Along with this comes a channel select option, an auto-gain feature, "safe" mode, and linking two channels into a stereo pair. Mark the new scarlett2_notify_input_*() functions with __always_unused until they get used when the Gen 4 notification callback function arrays are added. Signed-off-by:
-
Geoffrey D. Bennett authored
Extend the existing "air" option support from Scarlett Gen 3, which had two states (off/on), to accommodate Scarlett Gen 4's new state: Presence + Drive. Signed-off-by:
-
Geoffrey D. Bennett authored
Gen 2/3 interfaces would only use 0/1 values for input level and phantom power switch controls. Gen 4 interfaces use the second bit to indicate that the state should be changed (or is changing), and the input is to be muted (or is muted) while that happens. Add a "mute" flag to config items to enable this behaviour for the level/phantom controls. Signed-off-by:
-
Geoffrey D. Bennett authored
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3: - the values are written into a shared write location - the values are only byte-sized - the read locations now extend beyond 0xFF - a separate NVRAM save step is no longer required This patch implements that alternate write style, triggered by setting the config item size field to zero. The write address is specified through a new config set field gen4_write_addr. Signed-off-by:
-
Geoffrey D. Bennett authored
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls on analogue input #2 (the Gen 3 Solo had these controls on analogue input #1). Add air_input_first and phantom_first device info options to cater for this. These options are similar to the level_input_first option that was added for the Gen 3 Solo, but these new options do not require adjusting the index of the control. Signed-off-by:
-
Geoffrey D. Bennett authored
Use a local variable *mixer rather than repeating elem->header.mixer in scarlett2_direct_monitor_ctl_get() and scarlett2_meter_ctl_get(). Signed-off-by:
-
Geoffrey D. Bennett authored
The notification value for monitor_other on the large interfaces is the same as the notification value for direct_monitor on the 3rd Gen small interfaces. Add a separate scarlett3a_notifications array and split out the direct_monitor handling. Signed-off-by:
-
Geoffrey D. Bennett authored
Gen 2/3 devices have a single notification value for "input other" changes. Gen 4 has separate notification values for level, pad, air, and phantom power changes. Therefore, split the input_other_updated field and the scarlett2_update_input_other() function into the four components so that they can be handled separately later. Signed-off-by:
-
Geoffrey D. Bennett authored
db_scale_scarlett2_gain is the TLV for the output volume controls. Gen 4 has software-controllable input gain controls, so rename this to db_scale_scarlett2_volume so we can use that name for the inputs. Signed-off-by:
-
Geoffrey D. Bennett authored
Add a #define for SCARLETT2_MIX_MAX (max of mixer inputs * outputs) as that will be used again soon. Signed-off-by:
-
Geoffrey D. Bennett authored
Refactor scarlett2_usb_get_mix(), moving the scarlett2_mixer_values[] lookup into scarlett2_mixer_value_to_db(). Signed-off-by:
-
Geoffrey D. Bennett authored
Currently-supported interfaces with a mixer have per-channel volume controls, but this changes in Gen 4. Add a check so that the Playback Volume and associated controls don't get created unless the SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present. Signed-off-by:
-
Geoffrey D. Bennett authored
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use scarlett2_has_config_item() instead of the per-device line_out_hw_vol. As Gen 4 has a master volume control but no SW/HW switches, check for both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH as needed, even though for Gen 2 and Gen 3 the former implies the latter. Signed-off-by:
-
Geoffrey D. Bennett authored
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute notifications. The Scarlett 4i4 Gen 4 has volume change notification but no dim/mute control so split dim_mute_update out from vol_update. Signed-off-by:
-
Geoffrey D. Bennett authored
The struct scarlett2_usb_volume_status matched the config space layout of a few volume controls that could be read together and were in fixed locations between Gen 2 and Gen 3 devices. Gen 4 devices have removed, moved, and new related controls, so this needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the only config item that didn't already have its own entry, because it is read-only), we can remove: - struct scarlett2_usb_volume_state, - #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and - scarlett2_usb_get_volume_status() and replace with calls to scarlett2_usb_get_config(). Signed-off-by:
-
Geoffrey D. Bennett authored
Rather than looking up the analogue and mixer I/O counts repeatedly in info->port_count[SCARLETT2_PORT_TYPE_*][SCARLETT2_PORT_*], save those numbers in private variables. Signed-off-by:
-
Geoffrey D. Bennett authored
num_mux_srcs and num_mux_dsts will fit into a u8, so change the type. More similar counts are coming soon. Signed-off-by:
-
