- 18 Apr, 2017 40 commits
-
-
Usha Ketineni authored
When DCB is enabled, add checks to ensure creation of number of VF's is valid based on the traffic classes configured by the device. Signed-off-by:
Usha Ketineni <usha.k.ketineni@intel.com> Tested-by:
Ronald Bynoe <ronald.j.bynoe@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Benjamin Herrenschmidt says: ==================== ftgmac100: Rework batch 5 - Features This is the third spin of the fifth and last batch of updates to the ftgmac100 driver. This contains a few additional "features" such as: - Support for ethtool n-way reset - Multicast filtering & promisc support - Vlan offload - netpoll And a couple of misc bits. This also adds the device-tree binding documentation. v2. - Addresses review comments and adds a new patch fixing a theorical ordering issue in my new NAPI poll implementation - Add a bug fix (Patch 8/9) for a potential ordering issue in the new NAPI poll code. v3. - Rebase on net-next (fix conflict with an unrelated #include change series) - Update DT bindings better describing accepted phy-mode values ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Benjamin Herrenschmidt authored
Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
We need to ensure the loads from the descriptor are done after the MMIO store clearing the interrupts has completed, otherwise we might still miss work. A read back from the MMIO register will "push" the posted store and ioread32 has a barrier on weakly aordered architectures that will order subsequent accesses. Signed-off-by:
-
Benjamin Herrenschmidt authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
This uses the standard phy-mode property Signed-off-by:
-
Benjamin Herrenschmidt authored
Just call the interrupt handler with interrupts locally disabled Signed-off-by:
-
Benjamin Herrenschmidt authored
The chip supports HW vlan tag insertion and extraction. Add support for it. Signed-off-by:
-
Benjamin Herrenschmidt authored
This adds the ndo_set_rx_mode() callback to configure the multicast filters, promisc and allmulti options. Signed-off-by:
-
Benjamin Herrenschmidt authored
Hopefully my understanding of how the hardware works is correct, as the documentation isn't completely clear. So far I have seen no obvious issue. Pause seem to also work with NC-SI. Signed-off-by:
-
Benjamin Herrenschmidt authored
A non-wired up implementation accidentally made its way in a previous patch (Make ring sizes configurable via ethtool). This removes it and wires up the generic phy_ethtool_nway_reset instead. Signed-off-by:
-
David S. Miller authored
Markus Elfring says: ==================== Ethernet-Marvell: Fine-tuning for several function implementations Several update suggestions were taken into account from static source code analysis. ==================== Signed-off-by: -
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "!skge->mem". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed information out like the following. Comparison to NULL could be written "txq->descs". Thus fix the affected source code place. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Use the word "failed" in the string for three function calls. Signed-off-by:
-
Markus Elfring authored
Adjust jump labels according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
The script "checkpatch.pl" pointed out that labels should not be indented. Thus delete two horizontal tabs before the jump label "err_drop_frame" in the function "mvpp2_rx". Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of data structures by references to a local variable as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by:
-
Markus Elfring authored
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Replace the specification of two data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Markus Elfring authored
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data type by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by:
-
Florian Westphal authored
commit 83e7e4ce ("mac80211: Use rhltable instead of rhashtable") removed the last user that made use of 'insecure_elasticity' parameter, i.e. the default of 16 is used everywhere. Replace it with a constant. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: add proper process for duplicated stream reconf requests Now sctp stream reconf will process a request again even if it's seqno is less than asoc->strreset_inseq. It may cause a replay attack. This patchset is to avoid it by add proper process for all duplicated stream reconf requests. ==================== Signed-off-by: -
Xin Long authored
This patch is to fix the replay attack issue for strreset asoc requests. When a duplicated strreset asoc request is received, reply it with bad seqno if it's seqno < asoc->strreset_inseq - 2, and reply it with the result saved in asoc if it's seqno >= asoc->strreset_inseq - 2. But note that if the result saved in asoc is performed, the sender's next tsn and receiver's next tsn for the response chunk should be set. It's safe to get them from asoc. Because if it's changed, which means the peer has received the response already, the new response with wrong tsn won't be accepted by peer. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
