Since

commit 890880dd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.

v2: Rebase.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Kalyan Thota <kalyant@codeaurora.org>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Eric Anholt <eric@anholt.net>
Cc: Tanmay Shah <tanmay@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-4-daniel.vetter@ffwll.ch

Since

commit 890880dd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: "José Roberto de Souza" <jose.souza@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Karthik B S <karthik.b.s@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-3-daniel.vetter@ffwll.ch

Since

commit 890880dd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here.
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Yannick Fertre <yannick.fertre@foss.st.com>
Cc: Philippe Cornu <philippe.cornu@foss.st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-7-daniel.vetter@ffwll.ch

Even when all we support is linear, make that explicit. Otherwise the
uapi is rather confusing.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-2-daniel.vetter@ffwll.ch

Since

commit 890880dd
Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Date:   Fri Jan 4 09:56:10 2019 +0100

    drm: Auto-set allow_fb_modifiers when given modifiers at plane init

this is done automatically as part of plane init, if drivers set the
modifier list correctly. Which is the case here for both komeda and
malidp.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427092018.832258-1-daniel.vetter@ffwll.ch

Replace the open coded drm_mode_is_420_only() with the real thing.

No functional changes.

Cc: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504102742.7005-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

LONTIUM_LT8912B uses "drm_display_mode_to_videomode" from
DRM framework that needs VIDEOMODE_HELPERS to be enabled.

Fixes: 30e2ae94 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504220207.4004511-1-adrien.grassein@gmail.com

Tracking devices, process info and fence info using
/proc/pid/fdinfo
Signed-off-by: David M Nieto <David.Nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-2-Roy.Sun@amd.com

Update the timestamp of scheduled fence on HW
completion of the previous fences

This allow more accurate tracking of the fence
execution in HW

v2 (chk): drop the flag check and improve the comment
Signed-off-by: David M Nieto <david.nieto@amd.com>
Signed-off-by: Roy Sun <Roy.Sun@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426062701.39732-1-Roy.Sun@amd.com

TTM uses drm-misc now.  Update the tree.

Cc: David Ward <david.ward@gatech.edu>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210503134736.1467003-1-alexander.deucher@amd.com

The ti_sn_gpio_unregister() is not just called from the remove path
but also from the error handling of the init path. That means it can't
have the __exit annotation.

Fixes: bf73537f ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504073845.1.Ibf4194f4252846edaa0c6a6c7b86588f75ad5529@changeid

Include the header for the prototype.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210503142710.153369-1-christian.koenig@amd.com

It doesn't make sense to go out to the bus and read the EDID over and
over again. Let's cache it and throw away the cache when we turn power
off from the panel. Autosuspend means that even if there are several
calls to read the EDID before we officially turn the power on then we
should get good use out of this cache.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.18.If050957eaa85cf45b10bcf61e6f7fa61c9750ebf@changeid

I don't believe that it ever makes sense to read the EDID when a panel
is not powered and the powering on of the panel is the job of
prepare(). Let's make sure that this happens before we try to read the
EDID. We use the pm_runtime functions directly rather than directly
calling the normal prepare() function because the pm_runtime functions
are definitely refcounted whereas it's less clear if the prepare() one
is.

NOTE: I'm not 100% sure how EDID reading was working for folks in the
past, but I can only assume that it was failing on the initial attempt
and then working only later. This patch, presumably, will fix that. If
some panel out there really can read the EDID without powering up and
it's a big advantage to preserve the old behavior we can add a
per-panel flag. It appears that providing the DDC bus to the panel in
the past was somewhat uncommon in any case.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.17.Ibd31b8f7c73255d68c5c9f5b611b4bfaa036f727@changeid

As of commit 5186421c ("drm: Introduce epoch counter to
drm_connector") the drm_get_edid() function calls
drm_connector_update_edid_property() for us. There's no reason for us
to call it again.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.16.Icb581b0273d95cc33ca38676c61ae6d7d2e75357@changeid

Let's reorganize how we init and turn on the reference clock in the
code to allow us to turn it on early (even before pre_enable()) so
that we can read the EDID early. This is handy for eDP because:
- We always assume that a panel is there.
- Once we report that a panel is there we get asked to read the EDID.
- Pre-enable isn't called until we know what pixel clock we want to
  use and we're ready to turn everything on. That's _after_ we get
  asked to read the EDID.

NOTE: the above only works out OK if we "refclk" is provided. Though I
don't have access to any hardware that uses ti-sn65dsi86 and _doesn't_
provide a "refclk", I believe that we'll have trouble reading the EDID
at bootup in that case. Specifically I believe that if there's no
"refclk" we need the MIPI source clock to be active before we can
successfully read the EDID. My evidence here is that, in testing, I
couldn't read the EDID until I turned on the DPPLL in the bridge chip
and that the DPPLL needs the input clock to be active.

Since this is hard to support, let's punt trying to handle this case
if there's no "refclk". In that case we'll enable comms in
pre_enable() like we always did.

I don't believe there are any users of the ti-sn65dsi86 bridge chip
that _don't_ use "refclk". The bridge chip is _very_ inflexible in
that mode. The only time I've seen that mode used was for some really
early prototype hardware that was thrown in the e-waste bin years ago
when we realized how inflexible it was.

Even if someone is using the bridge chip without the "refclk" they're
in no worse shape than they were before the (fairly recent) commit
58074b08 ("drm/bridge: ti-sn65dsi86: Read EDID blob over DDC").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.13.Ie8cf556114953c6e7634564cc0d3ddbd103cb96c@changeid

No functional changes--this just makes the diffstat of a future change
easier to understand.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.12.I047b8c7c6a3fc60eaca473da7a374f171fb021c2@changeid

Let's make the bridge use autosuspend with a 500ms delay. This is in
preparation for promoting DP AUX transfers to their own sub-driver so
that we're not constantly powering up and down the device as we
transfer all the chunks.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.11.I4c0b4a87e4dc19e5023b4d0a21bbfa6d9c09ebd8@changeid

When I added support for the hpd-gpio to simple-panel in commit
48834e60 ("drm/panel-simple: Support hpd-gpios for delaying
prepare()"), I added a special case to handle a circular dependency I
was running into on the ti-sn65dsi86 bridge chip. On my board the
hpd-gpio is actually provided by the bridge chip. That was causing
some circular dependency problems that I had to work around by getting
the hpd-gpio late.

I've now reorganized the ti-sn65dsi86 bridge chip driver to be a
collection of sub-drivers. Now the GPIO part can probe separately and
that breaks the chain. Let's get rid of the old code to clean things
up.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.10.I40eeedc23459d1e3fc96fa6cdad775d88c6e706c@changeid

Let's use the newly minted aux bus to break up the driver into sub
drivers. We're not doing a full breakup here: all the code is still in
the same file and remains largely untouched. The big goal here of
using sub-drivers is to allow part of our code to finish probing even
if some other code needs to defer. This can solve some chicken-and-egg
problems. Specifically:
- In commit 48834e60 ("drm/panel-simple: Support hpd-gpios for
  delaying prepare()") we had to add a bit of a hack to simpel-panel
  to support HPD showing up late. We can get rid of that hack now
  since the GPIO part of our driver can finish probing early.
- We have a desire to expose our DDC bus to simple-panel (and perhaps
  to a backlight driver?). That will end up with the same
  chicken-and-egg problem. A future patch to move this to a sub-driver
  will fix it.
- If/when we support the PWM functionality present in the bridge chip
  for a backlight we'll end up with another chicken-and-egg
  problem. If we allow the PWM to be a sub-driver too then it solves
  this problem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.9.I3e68fa38c4ccbdbdf145cad2b01e83a1e5eac302@changeid

This is just code motion of the probe routine to move all the things
that are for the "whole chip" (instead of the GPIO parts or the
MIPI-to-eDP parts) together at the start of probe. This is in
preparation for breaking the driver into sub-drivers.

Since we're using devm for all of the "whole chip" stuff this is
actually quite easy now.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.8.Ide8ba40feb2e43bc98a11edbb08d696d62dcd83e@changeid

Let's:
- Set the drvdata as soon as it's allocated. This just sets up a
  pointer so there's no downside here.
- Remove the useless call to i2c_set_clientdata() which is literally
  the same thing as dev_set_drvdata().

No functional changes intended.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.7.If5d4d4e22e97bebcd493b76765c1759527705620@changeid

Tiny cleanup for probe so we don't keep having to specify
"&client->dev" or "pdata->dev". No functional changes intended.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.6.I83925d8ca228bdc5f55b17854c90754efc6a470e@changeid

Let's cleanup the debugfs code to:
- Check for errors.
- Use devm to manage freeing, which also means we don't need to store
  a pointer in our structure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.5.I5fe072753290c6a77eda736ebd5778e17b7cb0fb@changeid

There's no devm_runtime_enable(), but it's easy to use
devm_add_action_or_reset() and means we don't need to worry about the
disable in our remove() routine or in error paths.

No functional changes intended by this change.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.4.I1e627eb5f316c0cf6595b120e6e262f5bf890300@changeid

Like the previous patch ("drm/bridge: ti-sn65dsi86: Rename the main
driver data structure") this is just a no-op rename in preparation for
splitting the driver up a bit.

Here I've attempted to rename functions / structures making sure that
anything applicable to the whole chip (instead of just the MIPI to eDP
bridge part) included "sn65dsi86" somewhere in the name instead of
just "ti_sn_bridge".
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.3.I4b28c737933a44548662df42ccd37db89ec739c1@changeid

In preparation for splitting this driver into sub-drivers, let's
rename the main data structure so it's clear that it's holding data
for the whole device and not just the MIPI-eDP bridge part.

This is a no-op change.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.2.Ib03e88304a9ea1c503f1b9567be5cbf8b7c5761c@changeid

The field pdev in struct drm_device is unused. Remove it. The
value can be obtained by upcasting from the structure's dev field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-8-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-7-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-6-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-5-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-4-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-3-tzimmermann@suse.de

Replace all references to struct drm_device's pdev field with
an upcast from dev.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210502104953.21768-2-tzimmermann@suse.de

Drop the special handling here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-3-christian.koenig@amd.com

Init all fields in ttm_resource_alloc() when we create a new resource.

v2: use place->mem_type instead of res->mem_type
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-2-christian.koenig@amd.com

Add a separate manager for the system domain and make function tables
mandatory.

v2: debug is still optional
v3: return void during init
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-1-christian.koenig@amd.com

Audit the includes and stop accessing the internal drm_mm_node.

The ttm_resource::start is the same value as the drm_mm_node::start.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210426175824.122557-1-christian.koenig@amd.com

Force-probing a connector can be slow and cause flickering. As this
affects the global KMS state, let's make it so only the DRM master
can force-probe a connector.

Non-master DRM clients won't be able to force-probe a connector
anymore. Instead, KMS will perform a regular read-only connector
query.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210402112212.5625-1-contact@emersion.fr

We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.

The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.

v4:
	* convert to drm_aperture_acquire_from_firmware()
v3:
	* use platform_device_unregister() and handle detachment
	  like hot-unplug event (Daniel)
v2:
	* adapt to aperture changes
	* use drm_dev_unplug() and drm_dev_enter/exit()
	* don't split error string
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-10-tzimmermann@suse.de