Pull sound fixes from Takashi Iwai:
 "A small collection of fixes.

  The main changes are fixes for a couple of regressions in AMD HD-audio
  and FireWire that were introduced in 5.5-rc1. The rest are small fixes
  for echoaudio and FireWire, as well as a usual Dell HD-audio fixup"

* tag 'sound-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO
  ALSA: hda/hdmi - Fix duplicate unref of pci_dev
  ALSA: fireface: fix return value in error path of isochronous resources reservation
  ALSA: oxfw: fix return value in error path of isochronous resources reservation
  ALSA: firewire-motu: fix double unlocked 'motu->mutex'
  ALSA: echoaudio: simplify get_audio_levels

Pull drm fixes from Dave Airlie:
 "Usual round of rc2 fixes.

  i915 and amdgpu leading the charge, but a few others in here,
  including some nouveau fixes, all seems pretty for rc2, but hey it's a
  Fri 13th pull so I'm sure it'll cause untold bad fortune.

  dma-buf:
   - memory leak fix
   - expand MAINTAINERS scope

  core:
   - fix mode matching for drivers not using picture_aspect_ratio

  nouveau:
   - panel scaling fix
   - MST BPC fix
   - atomic fixes

  i915:
   - GPU hang on idle transition
   - GLK+ FBC corruption fix
   - non-priv OA access on Tigerlake
   - HDCP state fix
   - CI found race fixes

  amdgpu:
   - renoir DC fixes
   - GFX8 fence flush alignment with userspace
   - Arcturus power profile fix
   - DC aux + i2c over aux fixes
   - GPUVM invalidation semaphore fixes
   - gfx10 golden registers update

  mgag200:
   - expand startadd fix

  panfrost:
   - devfreq fix
   - memory fixes

  mcde:
   - DSI pointer deref fix"

* tag 'drm-fixes-2019-12-13' of git://anongit.freedesktop.org/drm/drm: (51 commits)
  drm/amdgpu: add invalidate semaphore limit for SRIOV in gmc10
  drm/amdgpu: add invalidate semaphore limit for SRIOV and picasso in gmc9
  drm/amdgpu: avoid using invalidate semaphore for picasso
  Revert "drm/amdgpu: dont schedule jobs while in reset"
  drm/amdgpu: fix license on Kconfig and Makefiles
  drm/amdgpu/gfx10: update gfx golden settings for navi14
  drm/amdgpu/gfx10: update gfx golden settings
  drm/amdgpu/gfx10: update gfx golden settings for navi14
  drm/amdgpu/gfx10: update gfx golden settings
  drm/i915: Serialise with remote retirement
  drm/amd/display: include linux/slab.h where needed
  drm/amd/display: fix undefined struct member reference
  drm/nouveau/kms/nv50-: fix panel scaling
  drm/nouveau/kms/nv50-: Limit MST BPC to 8
  drm/nouveau/kms/nv50-: Store the bpc we're using in nv50_head_atom
  drm/nouveau/kms/nv50-: Call outp_atomic_check_view() before handling PBN
  drm/nouveau: Fix drm-core using atomic code-paths on pre-nv50 hardware
  drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit
  drm/i915/gt: Detect if we miss WaIdleLiteRestore
  drm/i915/hdcp: Nuke intel_hdcp_transcoder_config()
  ...

Pull block fixes from Jens Axboe:

 - stable fix for the bi_size overflow. Not a corruption issue, but a
   case wher we could merge but disallowed (Andreas)

 - NVMe pull request via Keith, with various fixes.

 - MD pull request from Song.

 - Merge window regression fix for the rq passthrough stats (Logan)

 - Remove unused blkcg_drain_queue() function (Guoqing)

* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
  blk-cgroup: remove blkcg_drain_queue
  block: fix NULL pointer dereference in account statistics with IDE
  md: make sure desc_nr less than MD_SB_DISKS
  md: raid1: check rdev before reference in raid1_sync_request func
  raid5: need to set STRIPE_HANDLE for batch head
  block: fix "check bi_size overflow before merge"
  nvme/pci: Fix read queue count
  nvme/pci Limit write queue sizes to possible cpus
  nvme/pci: Fix write and poll queue types
  nvme/pci: Remove last_cq_head
  nvme: Namepace identification descriptor list is optional
  nvme-fc: fix double-free scenarios on hw queues
  nvme: else following return is not needed
  nvme: add error message on mismatching controller ids
  nvme_fc: add module to ops template to allow module references
  nvmet-loop: Avoid preallocating big SGL for data
  nvme-fc: Avoid preallocating big SGL for data
  nvme-rdma: Avoid preallocating big SGL for data

Pull io_uring fixes from Jens Axboe:

 - A tweak to IOSQE_IO_LINK (also marked for stable) to allow links that
   don't sever if the result is < 0.

   This is mostly for linked timeouts, where if we ask for a pure
   timeout we always get -ETIME. This makes links useless for that case,
   hence allow a case where it works.

 - Five minor optimizations to fix and improve cases that regressed
   since v5.4.

 - An SQTHREAD locking fix.

 - A sendmsg/recvmsg iov assignment fix.

 - Net fix where read_iter/write_iter don't honor IOCB_NOWAIT, and
   subsequently ensuring that works for io_uring.

 - Fix a case where for an invalid opcode we might return -EBADF instead
   of -EINVAL, if the ->fd of that sqe was set to an invalid fd value.

* tag 'io_uring-5.5-20191212' of git://git.kernel.dk/linux-block:
  io_uring: ensure we return -EINVAL on unknown opcode
  io_uring: add sockets to list of files that support non-blocking issue
  net: make socket read/write_iter() honor IOCB_NOWAIT
  io_uring: only hash regular files for async work execution
  io_uring: run next sqe inline if possible
  io_uring: don't dynamically allocate poll data
  io_uring: deferred send/recvmsg should assign iov
  io_uring: sqthread should grab ctx->uring_lock for submissions
  io-wq: briefly spin for new work after finishing work
  io-wq: remove worker->wait waitqueue
  io_uring: allow unbreakable links

Merge tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM multipath by restoring full path selector functionality for
   bio-based configurations that don't haave a SCSI device handler.

 - Fix dm-btree removal to ensure non-root btree nodes have at least
   (max_entries / 3) entries. This resolves userspace thin_check
   utility's report of "too few entries in btree_node".

 - Fix both the DM thin-provisioning and dm-clone targets to properly
   flush the data device prior to metadata commit. This resolves the
   potential for inconsistency across a power loss event when the data
   device has a volatile writeback cache.

 - Small documentation fixes to dm-clone and dm-integrity.

* tag 'for-5.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  docs: dm-integrity: remove reference to ARC4
  dm thin: Flush data device before committing metadata
  dm thin metadata: Add support for a pre-commit callback
  dm clone: Flush destination device before committing metadata
  dm clone metadata: Use a two phase commit
  dm clone metadata: Track exact changes per transaction
  dm btree: increase rebalance threshold in __rebalance2()
  dm: add dm-clone to the documentation index
  dm mpath: remove harmful bio-based optimization

Pull FIELD_SIZEOF conversion from Kees Cook:
 "A mostly mechanical treewide conversion from FIELD_SIZEOF() to
  sizeof_field(). This avoids the redundancy of having 2 macros
  (actually 3) doing the same thing, and consolidates on sizeof_field().
  While "field" is not an accurate name, it is the common name used in
  the kernel, and doesn't result in any unintended innuendo.

  As there are still users of FIELD_SIZEOF() in -next, I will clean up
  those during this coming development cycle and send the final old
  macro removal patch at that time"

* tag 'sizeof_field-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  treewide: Use sizeof_field() macro
  MIPS: OCTEON: Replace SIZEOF_FIELD() macro

drm-fixes-5.5-2019-12-12:

amdgpu:
- DC fixes for renoir
- Gfx8 fence flush align with mesa
- Power profile fix for arcturus
- Freesync fix
- DC I2c over aux fix
- DC aux defer fix
- GPU reset fix
- GPUVM invalidation semaphore fixes for PCO and SR-IOV
- Golden settings updates for gfx10
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212223211.8034-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2019-12-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix user reported issue #673: GPU hang on transition to idle
- Avoid corruption on the top of the screen on GLK+ by disabling FBC
- Fix non-privileged access to OA on Tigerlake
- Fix HDCP code not to touch global state when just computing commit
- Fix CI splat by saving irqstate around virtual_context_destroy
- Serialise context retirement possibly on another CPU
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212100759.GA22260@jlahtine-desk.ger.corp.intel.com

Merge tag 'drm-misc-next-fixes-2019-12-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

-mgag200: more startadd mitigation (Thomas)
-panfrost: devfreq fix + several memory fixes (Steven, Boris)

Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212140145.GA145200@art_vandelay

It may fail to load guest driver in round 2 when using invalidate
semaphore for SRIOV. So it needs to avoid using invalidate semaphore
for SRIOV.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It may fail to load guest driver in round 2 or cause Xstart problem
when using invalidate semaphore for SRIOV or picasso. So it needs avoid
using invalidate semaphore for SRIOV and picasso.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull ceph fixes from Ilya Dryomov:
 "A fix to avoid a corner case when scheduling cap reclaim in batches
  from Xiubo, a patch to add some observability into cap waiters from
  Jeff and a couple of cleanups"

* tag 'ceph-for-5.5-rc2' of git://github.com/ceph/ceph-client:
  ceph: add more debug info when decoding mdsmap
  ceph: switch to global cap helper
  ceph: trigger the reclaim work once there has enough pending caps
  ceph: show tasks waiting on caps in debugfs caps file
  ceph: convert int fields in ceph_mount_options to unsigned int

Since blk_drain_queue had already been removed, so this function
is not needed anymore.
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The IDE driver creates some passthru requests which never get
submitted to the block layer in such a way that blk_account_io_start()
gets called. However, the driver still calls __blk_mq_end_request() in
ide_end_rq() which will call blk_account_io_completion() which tries
to dereferences req->part which is never set. See ide_prep_sense() for
an example of where these requests come from.

To fix this, blk_account_io_completion() and blk_account_io_done()
should do nothing if req->part is not set.

The back trace of this bug is:

    BUG: kernel NULL pointer dereference, address: 000002ac
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    *pde = 00000000
    Oops: 0002 [#1]
    CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted
    5.4.0-rc2-00011-g48d9b0d4 #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1
    04/01/2014
    Workqueue: kblockd drive_rq_insert_work
    EIP: blk_account_io_completion+0x7a/0xf0
    Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee
    09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4
    02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b
    EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54
    DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046
    CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0
    Call Trace:
     <IRQ>
      blk_update_request+0x85/0x420
      ide_end_rq+0x38/0xa0
      ide_complete_rq+0x3d/0x70
      cdrom_newpc_intr+0x258/0xba0
      ide_intr+0x135/0x250
      __handle_irq_event_percpu+0x3e/0x250
      handle_irq_event_percpu+0x1f/0x50
      handle_irq_event+0x32/0x60
      handle_level_irq+0x6c/0x110
      handle_irq+0x72/0xa0
      </IRQ>
      do_IRQ+0x45/0xad
      common_interrupt+0x115/0x11c

Fixes: 48d9b0d4 ("block: account statistics for passthrough requests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It may cause timeout waiting for sem acquire in VM flush when using
invalidate semaphore for picasso. So it needs to avoid using invalidate
semaphore for piasso.
Signed-off-by: changzhu <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit f2efc6e6.

This was fixed properly for 5.5, but came back via 5.4 merge
into drm-next, so revert it again.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Bunch of random nouveau fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv56Am90okV334eXgxDuK228sb9UJxMiOYjNAMShvvv4cg@mail.gmail.com

Pull MD fixes from Song.

* 'md-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/song/md:
  md: make sure desc_nr less than MD_SB_DISKS
  md: raid1: check rdev before reference in raid1_sync_request func
  raid5: need to set STRIPE_HANDLE for batch head

- Expand dma-buf MAINTAINER scope
- Fix mode matching for drivers not using picture_aspect_ratio
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211212107.GA257983@art_vandelay

Pull AFS fixes from David Howells:
 "Fixes for AFS plus one patch to make debugging easier:

   - Fix how addresses are matched to server records. This is currently
     incorrect which means cache invalidation callbacks from the server
     don't necessarily get delivered correctly. This causes stale data
     and metadata to be seen under some circumstances.

   - Make the dynamic root superblock R/W so that rpm/dnf can reapply
     the SELinux label to it when upgrading the Fedora filesystem-afs
     package. If the filesystem is R/O, this fails and the upgrade
     fails.

     It might be better in future to allow setxattr from an LSM to
     bypass the R/O protections, if only for pseudo-filesystems.

   - Fix the parsing of mountpoint strings. The mountpoint object has to
     have a terminal dot, whereas the source/device string passed to
     mount should not. This confuses type-forcing suffix detection
     leading to the wrong volume variant being mounted.

   - Make lookups in the dynamic root superblock for creation events
     (such as mkdir) fail with EOPNOTSUPP rather than something like
     EEXIST. The dynamic root only allows implicit creation by the
     ->lookup() method - and only if the target cell exists.

   - Fix the looking up of an AFS superblock to include the cell in the
     matching key - otherwise all volumes with the same ID number are
     treated as the same thing, irrespective of which cell they're in.

   - Show the volume name of each volume in the volume records displayed
     in /proc/net/afs/<cell>/volumes. This proved useful in debugging as
     it provides a way to map the volume IDs to names, where the names
     are what appear in /proc/mounts"

* tag 'afs-fixes-20191211' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Show volume name in /proc/net/afs/<cell>/volumes
  afs: Fix missing cell comparison in afs_test_super()
  afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP
  afs: Fix mountpoint parsing
  afs: Fix SELinux setting security label on /afs
  afs: Fix afs_find_server lookups for ipv4 peers

If we submit an unknown opcode and have fd == -1, io_op_needs_file()
will return true as we default to needing a file. Then when we go and
assign the file, we find the 'fd' invalid and return -EBADF. We really
should be returning -EINVAL for that case, as we normally do for
unsupported opcodes.

Change io_op_needs_file() to have the following return values:

0   - does not need a file
1   - does need a file
< 0 - error value

and use this to pass back the right value for this invalid case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull erofs fixes from Gao Xiang:
 "Mainly address a regression reported by David recently observed
  together with overlayfs due to the improper return value of
  listxattr() without xattr. Update outdated expressions in document as
  well.

  Summary:

   - Fix improper return value of listxattr() with no xattr

   - Keep up documentation with latest code"

* tag 'erofs-for-5.5-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: update documentation
  erofs: zero out when listxattr is called with no xattr

Pull tracing fixes from Steven Rostedt:

 - Remove code I accidentally applied when doing a minor fix up to a
   patch, and then using "git commit -a --amend", which pulled in some
   other changes I was playing with.

 - Remove an used variable in trace_events_inject code

 - Fix function graph tracer when it traces a ftrace direct function.
   It will now ignore tracing a function that has a ftrace direct
   tramploine attached. This is needed for eBPF to use the ftrace direct
   code.

* tag 'trace-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix function_graph tracer interaction with BPF trampoline
  tracing: remove set but not used variable 'buffer'
  module: Remove accidental change of module_enable_x()

There's no need to separately check for signals while inside the locked
region, since we're going to do "wait_event_interruptible()" right
afterwards anyway, and the error handling is much simpler there.

The check for whether we had already read anything was also redundant,
since we no longer do the odd merging of reads when there are pending
writers.

But perhaps more importantly, this adds commentary about why we still
need to wake up possible writers even though we didn't read any data,
and why we can skip all the finishing touches now if we get a signal (or
had a signal pending) while waiting for more data.

[ This is a split-out cleanup from my "make pipe IO use exclusive wait
  queues" thing, which I can't apply because it triggers a nasty bug in
  the GNU make jobserver   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

amdgpu is MIT licensed.

Fixes: ec8f24b7 ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add registers: mmPA_SC_BINNER_TIMEOUT_COUNTER and mmPA_SC_ENHANCE_2
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add registers: mmSPI_CONFIG_CNTL
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add registers: mmSPI_CONFIG_CNTL
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For super_90_load, we need to make sure 'desc_nr' less
than MD_SB_DISKS, avoiding invalid memory access of 'sb->disks'.

Fixes: 228fc7d7 ("md: avoid invalid memory access for array sb->dev_roles")
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

In raid1_sync_request func, rdev should be checked before reference.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

With commit 6ce220dd ("raid5: don't set
STRIPE_HANDLE to stripe which is in batch list"), we don't want to set
STRIPE_HANDLE flag for sh which is already in batch list.

However, the stripe which is the head of batch list should set this flag,
otherwise panic could happen inside init_stripe at BUG_ON(sh->batch_head),
it is reproducible with raid5 on top of nvdimm devices per Xiao oberserved.

Thanks for Xiao's effort to verify the change.

Fixes: 6ce220dd ("raid5: don't set STRIPE_HANDLE to stripe which is in batch list")
Reported-by: Xiao Ni <xni@redhat.com>
Tested-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

Show the name of each volume in /proc/net/afs/<cell>/volumes to make it
easier to work out the name corresponding to a volume ID.  This makes it
easier to work out which mounts in /proc/mounts correspond to which volume
ID.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>

Fix missing cell comparison in afs_test_super().  Without this, any pair
volumes that have the same volume ID will share a superblock, no matter the
cell, unless they're in different network namespaces.

Normally, most users will only deal with a single cell and so they won't
see this.  Even if they do look into a second cell, they won't see a
problem unless they happen to hit a volume with the same ID as one they've
already got mounted.

Before the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/kth.se afs ro,relatime 0 0

After the patch:

    # ls /afs/grand.central.org/archive
    linuxdev/  mailman/  moin/  mysql/  pipermail/  stage/  twiki/
    # ls /afs/kth.se/
    admin/        common/  install/  OldFiles/  service/  system/
    bakrestores/  home/    misc/     pkg/       src/      wsadmin/
    # cat /proc/mounts | grep afs
    none /afs afs rw,relatime,dyn,autocell 0 0
    #grand.central.org:root.cell /afs/grand.central.org afs ro,relatime 0 0
    #grand.central.org:root.archive /afs/grand.central.org/archive afs ro,relatime 0 0
    #kth.se:root.cell /afs/kth.se afs ro,relatime 0 0

Fixes: ^1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Carsten Jacobi <jacobi@de.ibm.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>
cc: Todd DeSantis <atd@us.ibm.com>

Fix the lookup method on the dynamic root directory such that creation
calls, such as mkdir, open(O_CREAT), symlink, etc. fail with EOPNOTSUPP
rather than failing with some odd error (such as EEXIST).

lookup() itself tries to create automount directories when it is invoked.
These are cached locally in RAM and not committed to storage.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>

Each AFS mountpoint has strings that define the target to be mounted.  This
is required to end in a dot that is supposed to be stripped off.  The
string can include suffixes of ".readonly" or ".backup" - which are
supposed to come before the terminal dot.  To add to the confusion, the "fs
lsmount" afs utility does not show the terminal dot when displaying the
string.

The kernel mount source string parser, however, assumes that the terminal
dot marks the suffix and that the suffix is always "" and is thus ignored.
In most cases, there is no suffix and this is not a problem - but if there
is a suffix, it is lost and this affects the ability to mount the correct
volume.

The command line mount command, on the other hand, is expected not to
include a terminal dot - so the problem doesn't arise there.

Fix this by making sure that the dot exists and then stripping it when
passing the string to the mount configuration.

Fixes: bec5eb61 ("AFS: Implement an autocell mount capability [ver #2]")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Jonathan Billings <jsbillings@jsbillings.org>

Since retirement may be running in a worker on another CPU, it may be
skipped in the local intel_gt_wait_for_idle(). To ensure the state is
consistent for our sanity checks upon load, serialise with the remote
retirer by waiting on the timeline->mutex.

Outside of this use case, e.g. on suspend or module unload, we expect the
slack to be picked up by intel_gt_pm_wait_for_idle() and so prefer to
put the special case serialisation with retirement in its single user,
for now at least.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191121071044.97798-2-chris@chris-wilson.co.uk
(cherry picked from commit 2d0fb251)
Fixes: 093b9228 ("drm/i915: Split i915_active.mutex into an irq-safe spinlock for the rbtree")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/754Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

In chasing a performance issue between using IORING_OP_RECVMSG and
IORING_OP_READV on sockets, tracing showed that we always punt the
socket reads to async offload. This is due to io_file_supports_async()
not checking for S_ISSOCK on the inode. Since sockets supports the
O_NONBLOCK (or MSG_DONTWAIT) flag just fine, add sockets to the list
of file types that we can do a non-blocking issue to.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The socket read/write helpers only look at the file O_NONBLOCK. not
the iocb IOCB_NOWAIT flag. This breaks users like preadv2/pwritev2
and io_uring that rely on not having the file itself marked nonblocking,
but rather the iocb itself.

Cc: netdev@vger.kernel.org
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>