- 03 Sep, 2021 40 commits
-
-
Miaohe Lin authored
mfill_atomic_install_pte() is introduced to install pte and update mmu cache since commit bf6ebd97aba0 ("userfaultfd/shmem: modify shmem_mfill_atomic_pte to use install_pte()"). So we should remove tlbflush.h as update_mmu_cache() is not called here now. Link: https://lkml.kernel.org/r/20210812120350.49801-3-linmiaohe@huawei.comSigned-off-by:Miaohe Lin <linmiaohe@huawei.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Miaohe Lin authored
Patch series "Cleanups for shmem". This series contains cleanups to remove unneeded variable, header file, function forward declaration and so on. More details can be found in the respective changelogs. This patch (of 4): The local variable ret is always equal to -ENOMEM and never touched. So remove it and return -ENOMEM directly to simplify the code. Link: https://lkml.kernel.org/r/20210812120350.49801-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210812120350.49801-2-linmiaohe@huawei.comSigned-off-by:
-
Sebastian Andrzej Siewior authored
Each CPU has SHMEM_INO_BATCH inodes available in `->ino_batch' which is per-CPU. Access here is serialized by disabling preemption. If the pool is empty, it gets reloaded from `->next_ino'. Access here is serialized by ->stat_lock which is a spinlock_t and can not be acquired with disabled preemption. One way around it would make per-CPU ino_batch struct containing the inode number a local_lock_t. Another solution is to promote ->stat_lock to a raw_spinlock_t. The critical sections are short. The mpol_put() must be moved outside of the critical section to avoid invoking the destructor with disabled preemption. Link: https://lkml.kernel.org/r/20210806142916.jdwkb5bx62q5fwfo@linutronix.deSigned-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
John Hubbard authored
get_kernel_page() was added in 2012 by [1]. It was used for a while for NFS, but then in 2014, a refactoring [2] removed all callers, and it has apparently not been used since. Remove get_kernel_page() because it has no callers. [1] commit 18022c5d ("mm: add get_kernel_page[s] for pinning of kernel addresses for I/O") [2] commit 91f79c43 ("new helper: iov_iter_get_pages_alloc()") Link: https://lkml.kernel.org/r/20210729221847.1165665-1-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Cc: Mark Salter <msalter@redhat.com> Signed-off-by:
-
Hugh Dickins authored
We had a recurring situation in which admin procedures setting up swapfiles would race with test preparation clearing away swapfiles; and just occasionally that got stuck on a swapfile "(deleted)" which could never be swapped off. That is not supposed to be possible. 2.6.28 commit f9454548 ("don't unlink an active swapfile") admitted that it was leaving a race window open: now close it. may_delete() makes the IS_SWAPFILE check (amongst many others) before inode_lock has been taken on target: now repeat just that simple check in vfs_unlink() and vfs_rename(), after taking inode_lock. Which goes most of the way to fixing the race, but swapon() must also check after it acquires inode_lock, that the file just opened has not already been unlinked. Link: https://lkml.kernel.org/r/e17b91ad-a578-9a15-5e3-4989e0f999b5@google.com Fixes: f9454548 ("don't unlink an active swapfile") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
John Hubbard authored
try_get_page() is very similar to try_get_compound_head(), and in fact try_get_page() has fallen a little behind in terms of maintenance: try_get_compound_head() handles speculative page references more thoroughly. There are only two try_get_page() callsites, so just call try_get_compound_head() directly from those, and remove try_get_page() entirely. Also, seeing as how this changes try_get_compound_head() into a non-static function, provide some kerneldoc documentation for it. Link: https://lkml.kernel.org/r/20210813044133.1536842-4-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
try_grab_page() does the same thing as try_grab_compound_head(..., refs=1, ...), just with a different API. So there is a lot of code duplication there. Change try_grab_page() to call try_grab_compound_head(), while keeping the API contract identical for callers. Also, now that try_grab_compound_head() always has a caller, remove the __maybe_unused annotation. Link: https://lkml.kernel.org/r/20210813044133.1536842-3-jhubbard@nvidia.comSigned-off-by:
-
John Hubbard authored
Patch series "A few gup refactorings and documentation updates", v3. While reviewing some of the other things going on around gup.c, I noticed that the documentation was wrong for a few of the routines that I wrote. And then I noticed that there was some significant code duplication too. So this fixes those issues. This is not entirely risk-free, but after looking closely at this, I think it's actually a useful improvement, getting rid of the code duplication here. This patch (of 3): The documentation for try_grab_compound_head() and try_grab_page() has fallen a little out of date. Update and clarify a few points. Also make it kerneldoc-correct, by adding @args documentation. Link: https://lkml.kernel.org/r/20210813044133.1536842-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20210813044133.1536842-2-jhubbard@nvidia.comSigned-off-by:
-
Miaohe Lin authored
Use helper PAGE_ALIGNED to check if address is aligned to PAGE_SIZE. Minor readability improvement. Link: https://lkml.kernel.org/r/20210807093620.21347-6-linmiaohe@huawei.comSigned-off-by:
Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Miaohe Lin authored
When failed to try_grab_page, put_dev_pagemap() is missed. So pgmap refcnt will leak in this case. Also we remove the check for pgmap against NULL as it's also checked inside the put_dev_pagemap(). [akpm@linux-foundation.org: simplify, cleanup] [akpm@linux-foundation.org: fix return value] Link: https://lkml.kernel.org/r/20210807093620.21347-5-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Indeed, this BUG_ON couldn't catch anything useful. We are sure ret == 0 here because we would already bail out if ret != 0 and ret is untouched till here. Link: https://lkml.kernel.org/r/20210807093620.21347-4-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Remove unneed local variable orig_refs since refs is unchanged now. Link: https://lkml.kernel.org/r/20210807093620.21347-3-linmiaohe@huawei.comSigned-off-by:
-
Miaohe Lin authored
Patch series "Cleanups and fixup for gup". This series contains cleanups to remove unneeded variable, useless BUG_ON and use helper to improve readability. Also we fix a potential pgmap refcnt leak. More details can be found in the respective changelogs. This patch (of 5): Since commit a2beb5f1 ("mm: clean up the last pieces of page fault accountings"), the local variable major is unused. Remove it. Link: https://lkml.kernel.org/r/20210807093620.21347-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20210807093620.21347-2-linmiaohe@huawei.comSigned-off-by:
-
Jing Yangyang authored
./include/linux/buffer_head.h:412:64-65:WARNING:return of 0/1 in function 'has_bh_in_lru' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Link: https://lkml.kernel.org/r/20210824055828.58783-1-deng.changcheng@zte.com.cnSigned-off-by:
Jing Yangyang <jing.yangyang@zte.com.cn> Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
-
Shakeel Butt authored
Currently cgroup_writeback_by_id calls mem_cgroup_wb_stats() to get dirty pages for a memcg. However mem_cgroup_wb_stats() does a lot more than just get the number of dirty pages. Just directly get the number of dirty pages instead of calling mem_cgroup_wb_stats(). Also cgroup_writeback_by_id() is only called for best-effort dirty flushing, so remove the unused 'nr' parameter and no need to explicitly flush memcg stats. Link: https://lkml.kernel.org/r/20210722182627.2267368-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
-
Johannes Weiner authored
pginodesteal is supposed to capture the impact that inode reclaim has on the page cache state. Currently, it doesn't consider shadow pages that get dropped this way, even though this can have a significant impact on paging behavior, memory pressure calculations etc. To improve visibility into these effects, make sure shadow pages get counted when they get dropped through inode reclaim. This changes the return value semantics of invalidate_mapping_pages() semantics slightly, but the only two users are the inode shrinker itsel and a usb driver that logs it for debugging purposes. Link: https://lkml.kernel.org/r/20210614211904.14420-3-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Johannes Weiner authored
When drop_caches truncates the page cache in an inode it also includes any shadow entries for evicted pages. However, there is a preliminary check on whether the inode has pages: if it has *only* shadow entries, it will skip running truncation on the inode and leave it behind. Fix the check to mapping_empty(), such that it runs truncation on any inode that has cache entries at all. Link: https://lkml.kernel.org/r/20210614211904.14420-2-hannes@cmpxchg.orgSigned-off-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
Johannes Weiner authored
The page cache deletion paths all have interrupts enabled, so no need to use irqsafe/irqrestore locking variants. They used to have irqs disabled by the memcg lock added in commit c4843a75 ("memcg: add per cgroup dirty page accounting"), but that has since been replaced by memcg taking the page lock instead, commit 0a31bc97 ("mm: memcontrol: rewrite uncharge AP"). Link: https://lkml.kernel.org/r/20210614211904.14420-1-hannes@cmpxchg.orgSigned-off-by:
-
Jan Kara authored
We do some unlocked reads of writeback statistics like avg_write_bandwidth, dirty_ratelimit, or bw_time_stamp. Generally we are fine with getting somewhat out-of-date values but actually getting different values in various parts of the functions because the compiler decided to reload value from original memory location could confuse calculations. Use READ_ONCE for these unlocked accesses and WRITE_ONCE for the updates to be on the safe side. Link: https://lkml.kernel.org/r/20210713104716.22868-5-jack@suse.czSigned-off-by:
-
Jan Kara authored
Rename domain_update_bandwidth() to domain_update_dirty_limit(). The original name is a misnomer. The function has nothing to do with a bandwidth, it updates dirty limits. Link: https://lkml.kernel.org/r/20210713104716.22868-4-jack@suse.czSigned-off-by:
-
Jan Kara authored
Michael Stapelberg has reported that for workload with short big spikes of writes (GCC linker seem to trigger this frequently) the write throughput is heavily underestimated and tends to steadily sink until it reaches zero. This has rather bad impact on writeback throttling (causing stalls). The problem is that writeback throughput estimate gets updated at most once per 200 ms. One update happens early after we submit pages for writeback (at that point writeout of only small fraction of pages is completed and thus observed throughput is tiny). Next update happens only during the next write spike (updates happen only from inode writeback and dirty throttling code) and if that is more than 1s after previous spike, we decide system was idle and just ignore whatever was written until this moment. Fix the problem by making sure writeback throughput estimate is also updated shortly after writeback completes to get reasonable estimate of throughput for spiky workloads. [jack@suse.cz: avoid division by 0 in wb_update_dirty_ratelimit()] Link: https://lore.kernel.org/lkml/20210617095309.3542373-1-stapelberg+linux@google.com Link: https://lkml.kernel.org/r/20210713104716.22868-3-jack@suse.czSigned-off-by:
Michael Stapelberg <stapelberg+linux@google.com> Tested-by:
-
Jan Kara authored
Currently we trigger writeback bandwidth estimation from balance_dirty_pages() and from wb_writeback(). However neither of these need to trigger when the system is relatively idle and writeback is triggered e.g. from fsync(2). Make sure writeback estimates happen reliably by triggering them from do_writepages(). Link: https://lkml.kernel.org/r/20210713104716.22868-2-jack@suse.czSigned-off-by:
-
Jan Kara authored
Patch series "writeback: Fix bandwidth estimates", v4. Fix estimate of writeback throughput when device is not fully busy doing writeback. Michael Stapelberg has reported that such workload (e.g. generated by linking) tends to push estimated throughput down to 0 and as a result writeback on the device is practically stalled. The first three patches fix the reported issue, the remaining two patches are unrelated cleanups of problems I've noticed when reading the code. This patch (of 4): Track number of inodes under writeback for each bdi_writeback structure. We will use this to decide whether wb does any IO and so we can estimate its writeback throughput. In principle we could use number of pages under writeback (WB_WRITEBACK counter) for this however normal percpu counter reads are too inaccurate for our purposes and summing the counter is too expensive. Link: https://lkml.kernel.org/r/20210713104519.16394-1-jack@suse.cz Link: https://lkml.kernel.org/r/20210713104716.22868-1-jack@suse.czSigned-off-by:
-
liuhailong authored
Print NR_KERNEL_MISC_RECLAIMABLE stat from show_free_areas() so users can check whether the shrinker is working correctly and to show the current memory usage. Link: https://lkml.kernel.org/r/20210813104725.4562-1-liuhailong@oppo.comSigned-off-by:
liuhailong <liuhailong@oppo.com> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
A recent lockdep report included these lines: [ 96.177910] 3 locks held by containerd/770: [ 96.177934] #0: ffff88810815ea28 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x115/0x770 [ 96.177999] #1: ffffffff82915020 (rcu_read_lock){....}-{1:2}, at: get_swap_device+0x33/0x140 [ 96.178057] #2: ffffffff82955ba0 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30 While it was not useful to that bug report to know where the reclaim lock had been acquired, it might be useful under other circumstances. Allow the caller of __fs_reclaim_acquire to specify the instruction pointer to use. Link: https://lkml.kernel.org/r/20210719185709.1755149-1-willy@infradead.orgSigned-off-by:Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Omar Sandoval <osandov@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by:
-
Gavin Shan authored
In page table entry modifying tests, set_xxx_at() are used to populate the page table entries. On ARM64, PG_arch_1 (PG_dcache_clean) flag is set to the target page flag if execution permission is given. The logic exits since commit 4f04d8f0 ("arm64: MMU definitions"). The page flag is kept when the page is free'd to buddy's free area list. However, it will trigger page checking failure when it's pulled from the buddy's free area list, as the following warning messages indicate. BUG: Bad page state in process memhog pfn:08000 page:0000000015c0a628 refcount:0 mapcount:0 \ mapping:0000000000000000 index:0x1 pfn:0x8000 flags: 0x7ffff8000000800(arch_1|node=0|zone=0|lastcpupid=0xfffff) raw: 07ffff8000000800 dead000000000100 dead000000000122 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag(s) set This fixes the issue by clearing PG_arch_1 through flush_dcache_page() after set_xxx_at() is called. For architectures other than ARM64, the unexpected overhead of cache flushing is acceptable. Link: https://lkml.kernel.org/r/20210809092631.1888748-13-gshan@redhat.com Fixes: a5c3b9ff ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers") Signed-off-by:
Gavin Shan <gshan@redhat.com> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390] Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chunyu Hu <chuhu@redhat.com> Cc: Qian Cai <cai@lca.pw> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Gavin Shan authored
The variables used by old implementation isn't needed as we switched to "struct pgtable_debug_args". Lets remove them and related code in debug_vm_pgtable(). Link: https://lkml.kernel.org/r/20210809092631.1888748-12-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in PGD/P4D modifying tests. No allocated huge page is used in these tests. Besides, the unused variable @saved_p4dp and @saved_pudp are dropped. Link: https://lkml.kernel.org/r/20210809092631.1888748-11-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in PUD modifying tests. The allocated huge page is used when set_pud_at() is used. The corresponding tests are skipped if the huge page doesn't exist. Besides, the following unused variables in debug_vm_pgtable() are dropped: @prot, @paddr, @pud_aligned. Link: https://lkml.kernel.org/r/20210809092631.1888748-10-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in PMD modifying tests. The allocated huge page is used when set_pmd_at() is used. The corresponding tests are skipped if the huge page doesn't exist. Besides, the unused variable @pmd_aligned in debug_vm_pgtable() is dropped. Link: https://lkml.kernel.org/r/20210809092631.1888748-9-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in PTE modifying tests. The allocated page is used as set_pte_at() is used there. The tests are skipped if the allocated page doesn't exist. It's notable that args->ptep need to be mapped before the tests. The reason why we don't map args->ptep at the beginning is PTE entry is only mapped and accessible in atomic context when CONFIG_HIGHPTE is enabled. So we avoid to do that so that atomic context is only enabled if needed. Besides, the unused variable @pte_aligned and @ptep in debug_vm_pgtable() are dropped. Link: https://lkml.kernel.org/r/20210809092631.1888748-8-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in the migration and thp test functions. It's notable that the pre-allocated page is used in swap_migration_tests() as set_pte_at() is used there. Link: https://lkml.kernel.org/r/20210809092631.1888748-7-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in the soft_dirty and swap test functions. Link: https://lkml.kernel.org/r/20210809092631.1888748-6-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in protnone and devmap test functions. After that, the unused variable @protnone in debug_vm_pgtable() is dropped. Link: https://lkml.kernel.org/r/20210809092631.1888748-5-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in the leaf and savewrite test functions. Link: https://lkml.kernel.org/r/20210809092631.1888748-4-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
This uses struct pgtable_debug_args in the basic test functions. The unused variables @pgd_aligned and @p4d_aligned in debug_vm_pgtable() are dropped. Link: https://lkml.kernel.org/r/20210809092631.1888748-3-gshan@redhat.comSigned-off-by:
-
Gavin Shan authored
Patch series "mm/debug_vm_pgtable: Enhancements", v6. There are a couple of issues with current implementations and this series tries to resolve the issues: (a) All needed information are scattered in variables, passed to various test functions. The code is organized in pretty much relaxed fashion. (b) The page isn't allocated from buddy during page table entry modifying tests. The page can be invalid, conflicting to the implementations of set_xxx_at() on ARM64. The target page is accessed so that the iCache can be flushed when execution permission is given on ARM64. Besides, the target page can be unmapped and accessing to it causes kernel crash. "struct pgtable_debug_args" is introduced to address issue (a). For issue (b), the used page is allocated from buddy in page table entry modifying tests. The corresponding tets will be skipped if we fail to allocate the (huge) page. For other test cases, the original page around to kernel symbol (@start_kernel) is still used. The patches are organized as below. PATCH[2-10] could be combined to one patch, but it will make the review harder: PATCH[1] introduces "struct pgtable_debug_args" as place holder of all needed information. With it, the old and new implementation can coexist. PATCH[2-10] uses "struct pgtable_debug_args" in various test functions. PATCH[11] removes the unused code for old implementation. PATCH[12] fixes the issue of corrupted page flag for ARM64 This patch (of 6): In debug_vm_pgtable(), there are many local variables introduced to track the needed information and they are passed to the functions for various test cases. It'd better to introduce a struct as place holder for these information. With it, what the tests functions need is the struct. In this way, the code is simplified and easier to be maintained. Besides, set_xxx_at() could access the data on the corresponding pages in the page table modifying tests. So the accessed pages in the tests should have been allocated from buddy. Otherwise, we're accessing pages that aren't owned by us. This causes issues like page flag corruption or kernel crash on accessing unmapped page when CONFIG_DEBUG_PAGEALLOC is enabled. This introduces "struct pgtable_debug_args". The struct is initialized and destroyed, but the information in the struct isn't used yet. It will be used in subsequent patches. Link: https://lkml.kernel.org/r/20210809092631.1888748-1-gshan@redhat.com Link: https://lkml.kernel.org/r/20210809092631.1888748-2-gshan@redhat.comSigned-off-by: -
kernel test robot authored
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2107061049150.7197@hadrien Fixes: 7d37cb2c ("lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS") Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@inria.fr> Reported-by:
-
Gang He authored
Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to the expected level for satisfy dlm bast requests from the other nodes. But there is a rare situation. When dlm lock conversion is being canceled, ocfs2_downconvert_lock() function will return -EBUSY. You need to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm implementation. If we does not requeue this lockres entry, ocfs2 downconvert thread no longer handles this dlm lock bast request. Then, the other nodes will not get the dlm lock again, the current node's process will be blocked when acquire this dlm lock again. Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.comSigned-off-by:
Gang He <ghe@suse.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Tuo Li authored
A memory block is allocated through kmalloc(), and its return value is assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not initialized but it is accessed in: iput(oinfo->dqi_gqinode); To fix this possible uninitialized-variable access, assign NULL to oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the assignment in ocfs2_local_read_info(). Remove ocfs2_qinfo_lock_res_init() in ocfs2_global_read_info(). Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.comSigned-off-by:
Tuo Li <islituo@gmail.com> Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by:
-
