- 04 Mar, 2024 4 commits
-
-
Yicong Yang authored
The metric counting shows incorrect results if the events in the metric group using the same event but different filter options. This is because we only judge the event code to decide whether the event in the metric group should share the same hardware counter, but ignore the settings of the filter. For example, on a platform of 2 ports 0x1 and 0x2 but only port 0x1 has a downstream PCIe NVME device. The metric counting shows both ports have the same counts because we misassign these two events to one same hardware counter: [root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}' Performance counter stats for 'system wide': 7907484924 hisi_pcie0_core1/event=0x0104,port=0x2/ 7907484924 hisi_pcie0_core1/event=0x0104,port=0x1/ 10.153863691 seconds time elapsed Fix this by using the whole config rather than the event only to judge whether two events are the same and should share the same hardware counter. With this patch, the metric counting in the above case tends to be corrected: [root@localhost perf-iostat]# ./perf stat -e '{hisi_pcie0_core1/event=0x0104,port=0x2/,hisi_pcie0_core1/event=0x0104,port=0x1/}' Performance counter stats for 'system wide': 0 hisi_pcie0_core1/event=0x0104,port=0x2/ 8123122077 hisi_pcie0_core1/event=0x0104,port=0x1/ 10.152875631 seconds time elapsed Fixes: 8404b0fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU") Signed-off-by:Yicong Yang <yangyicong@hisilicon.com> Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240223103359.18669-4-yangyicong@huawei.comSigned-off-by:
Will Deacon <will@kernel.org>
-
Yicong Yang authored
Factor out retrieving of the register value for the corresponding event from hisi_pcie_config_event_ctrl() into a new function hisi_pcie_pmu_get_event_ctrl_val() allowing future reuse. Signed-off-by:
-
Yicong Yang authored
hisi_pcie_pmu_{config,clear}_filter() are config/clear HISI_PCIE_EVENT_CTRL register which contains not only the filter but also the event code. The function names are bit misleading. Rename it to hisi_pcie_pmu_{config,clear}_event_ctrl() to reflects their functions more accurately. Signed-off-by: -
Junhao He authored
HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter cannot be set due to the lack of clock under power saving mode. This will lead to error or inaccurate counts. The clock can be enabled by the PMU global enabling control. This patch tries to fix this by set the UC PMU enable before set event period to turn on the clock, and then restore the UC PMU configuration. The counter register can hold its value without a clock. Signed-off-by:
Junhao He <hejunhao3@huawei.com> Reviewed-by:
-
- 09 Feb, 2024 24 commits
-
-
Robin Murphy authored
Hook up devicetree probing support. For now let's hope that people implement PMIIDR properly and we don't need an override property or match data mechanism. Reviewed-by:
Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Besar Wicaksono <bwicaksono@nvidia.com> Tested-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/836722034302ff62f2df56aaeb0036e71945a5d1.1706718007.git.robin.murphy@arm.comSigned-off-by:
-
Robin Murphy authored
Add a binding for implementations of the Arm CoreSight Performance Monitoring Unit Architecture. Not to be confused with CoreSight debug and trace, the PMU architecture defines a standard MMIO interface for event counters following a similar design to the CPU PMU architecture, where the implementation and most of its features are discoverable through ID registers. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Robin Murphy authored
arm_cspmu_reset_counters() inherently also stops them since it is writing 0 to PMCR.E, so there should be no need to do that twice. Also tidy up the reset routine itself for consistency with the start and stop routines, and to be clear at first glance that it is simply writing a constant value. Reviewed-by:
-
Robin Murphy authored
The attribute group array itself is always the same, so there's no need to allocate it separately. Storing it directly in our instance data saves memory and gives us one less point of failure. Reviewed-by:
-
Robin Murphy authored
It's far simpler for implementations to literally override whichever default ops they want to, by initialising to the default ops first. This saves all the bother of checking what the impl_init_ops call has or hasn't touched. Make the same clear distinction for the PMIIDR override as well, in case we gain more sources for overriding that in future. Reviewed-by:
-
Robin Murphy authored
The debugfs pretty-printer was written for the CMN-600 assumptions of a maximum 8x8 mesh, but CMN-700 now allows coordinates and ID values up to 12 and 128 respectively, which can overflow the format strings, mess up the alignment of the table and hurt overall readability. This table does prove useful for double-checking that the driver is picking up the topology of new systems correctly and for verifying user expectations, so tweak the formatting to stay nice and readable with wider values. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/75dda01b2ad6e17f726830094bd38cb8faab5cbe.1702648125.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/a2587688c54834482d68fe2a44f415a649ad6477.1702648125.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
- 04 Feb, 2024 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous bug fixes and cleanups in ext4's multi-block allocator and extent handling code" * tag 'for-linus-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: make ext4_set_iomap() recognize IOMAP_DELALLOC map type ext4: make ext4_map_blocks() distinguish delalloc only extent ext4: add a hole extent entry in cache after punch ext4: correct the hole length returned by ext4_map_blocks() ext4: convert to exclusive lock while inserting delalloc extents ext4: refactor ext4_da_map_blocks() ext4: remove 'needed' in trace_ext4_discard_preallocations ext4: remove unnecessary parameter "needed" in ext4_discard_preallocations ext4: remove unused return value of ext4_mb_release_group_pa ext4: remove unused return value of ext4_mb_release_inode_pa ext4: remove unused return value of ext4_mb_release ext4: remove unused ext4_allocation_context::ac_groups_considered ext4: remove unneeded return value of ext4_mb_release_context ext4: remove unused parameter ngroup in ext4_mb_choose_next_group_*() ext4: remove unused return value of __mb_check_buddy ext4: mark the group block bitmap as corrupted before reporting an error ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt ext4: avoid bb_free and bb_fragments inconsistency in mb_free_blocks() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull smb client fixes from Steve French: "Five smb3 client fixes, mostly multichannel related: - four multichannel fixes including fix for channel allocation when multiple inactive channels, fix for unneeded race in channel deallocation, correct redundant channel scaling, and redundant multichannel disabling scenarios - add warning if max compound requests reached" * tag 'v6.8-rc3-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb: client: increase number of PDUs allowed in a compound request cifs: failure to add channel on iface should bump up weight cifs: do not search for channel if server is terminating cifs: avoid redundant calls to disable multichannel cifs: make sure that channel scaling is done only once -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Chandan Babu: - Clear XFS_ATTR_INCOMPLETE filter on removing xattr from a node format attribute fork - Remove conditional compilation of realtime geometry validator functions to prevent confusing error messages from being printed on the console during the mount operation * tag 'xfs-6.8-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove conditional building of rt geometry validator functions xfs: reset XFS_ATTR_INCOMPLETE filter on node removal
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are three tiny driver fixes for 6.8-rc3. They include: - Android binder long-term bug with epoll finally being fixed - fastrpc driver shutdown bugfix - open-dice lockdep fix All of these have been in linux-next this week with no reported issues" * tag 'char-misc-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: signal epoll threads of self-work misc: open-dice: Fix spurious lockdep warning misc: fastrpc: Mark all sessions as invalid in cb_remove
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty and serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for 6.8-rc3 that resolve a number of reported issues. Included in here are: - rs485 flag definition fix that affected the user/kernel abi in -rc1 - max310x driver fixes - 8250_pci1xxxx driver off-by-one fix - uart_tiocmget locking race fix All of these have been in linux-next for over a week with no reported issues" * tag 'tty-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: max310x: prevent infinite while() loop in port startup serial: max310x: fail probe if clock crystal is unstable serial: max310x: improve crystal stable clock detection serial: max310x: set default value when reading clock ready bit serial: core: Fix atomicity violation in uart_tiocmget serial: 8250_pci1xxxx: fix off by one in pci1xxxx_process_read_data() tty: serial: Fix bit order in RS485 flag definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are a bunch of small USB driver fixes for 6.8-rc3. Included in here are: - new usb-serial driver ids - new dwc3 driver id added - typec driver change revert - ncm gadget driver endian bugfix - xhci bugfixes for a number of reported issues - usb hub bugfix for alternate settings - ulpi driver debugfs memory leak fix - chipidea driver bugfix - usb gadget driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) USB: serial: option: add Fibocom FM101-GL variant USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e USB: serial: cp210x: add ID for IMST iM871A-USB usb: typec: tcpm: fix the PD disabled case usb: ucsi_acpi: Quirk to ack a connector change ack cmd usb: ucsi_acpi: Fix command completion handling usb: ucsi: Add missing ppm_lock usb: ulpi: Fix debugfs directory leak Revert "usb: typec: tcpm: fix cc role at port reset" usb: gadget: pch_udc: fix an Excess kernel-doc warning usb: f_mass_storage: forbid async queue when shutdown happen USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT usb: chipidea: core: handle power lost in workqueue usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend usb: dwc3: pci: add support for the Intel Arrow Lake-H usb: core: Prevent null pointer dereference in update_port_device_state xhci: handle isoc Babble and Buffer Overrun events properly xhci: process isoc TD properly when there was a transaction error mid TD. xhci: fix off by one check when adding a secondary interrupter. xhci: fix possible null pointer dereference at secondary interrupter removal ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixlet from Wolfram Sang: "MAINTAINERS update to point people to the new tree for i2c host driver changes" * tag 'i2c-for-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: Update i2c host drivers repository
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Core: - fix return value of is_slave_direction() for D2D dma Driver fixes for: - Documentaion fixes to resolve warnings for at_hdmac driver - bunch of fsl driver fixes for memory leaks, and useless kfree - TI edma and k3 fixes for packet error and null pointer checks" * tag 'dmaengine-fix-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: at_hdmac: add missing kernel-doc style description dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV dmaengine: fsl-qdma: Remove a useless devm_kfree() dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA dmaengine: ti: k3-udma: Report short packet errors dmaengine: ti: edma: Add some null pointer checks to the edma_probe dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools dmaengine: at_hdmac: fix some kernel-doc warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy driver fixes from Vinod Koul: - TI null pointer dereference - missing erdes mux entry in lan966x driver - Return of error code in renesas driver - Serdes init sequence and register offsets for IPQ drivers * tag 'phy-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP phy: lan966x: Add missing serdes mux entry phy: renesas: rcar-gen3-usb2: Fix returning wrong error code phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018 phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018
-
- 03 Feb, 2024 2 commits
-
-
Wolfram Sang authored
Merge tag 'i2c-host-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current Just a maintenance patch that updates the repository where the i2c host and muxes related patches will be collected.
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: "Vendor events: - Intel Alderlake/Sapphire Rapids metric fixes, the CPU type ("cpu_atom", "cpu_core") needs to be used as a prefix to be considered on a metric formula, detected via one of the 'perf test' entries. 'perf test' fixes: - Fix the creation of event selector lists on 'perf test' entries, by initializing the sample ID flag, which is done by 'perf record', so this fix affects only the tests, the common case isn't affected - Make 'perf list' respect debug settings (-v) to fix its 'perf test' entry - Fix 'perf script' test when python support isn't enabled - Special case 'perf script' tests on s390, where only DWARF call graphs are supported and only on software events - Make 'perf daemon' signal test less racy Compiler warnings/errors: - Remove needless malloc(0) call in 'perf top' that triggers -Walloc-size - Fix calloc() argument order to address error introduced in gcc-14 Build: - Make minimal shellcheck version to v0.6.0, avoiding the build to fail with older versions Sync kernel header copies: - stat.h to pick STATX_MNT_ID_UNIQUE - msr-index.h to pick IA32_MKTME_KEYID_PARTITIONING - drm.h to pick DRM_IOCTL_MODE_CLOSEFB - unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers - x86 cpufeatures to pick TDX, Zen, APIC MSR fence changes - x86's mem{cpy,set}_64.S used in 'perf bench' - Also, without tooling effects: asm-generic/unaligned.h, mount.h, fcntl.h, kvm headers" * tag 'perf-tools-fixes-for-v6.8-1-2024-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (21 commits) perf tools headers: update the asm-generic/unaligned.h copy with the kernel sources tools include UAPI: Sync linux/mount.h copy with the kernel sources perf evlist: Fix evlist__new_default() for > 1 core PMU tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' tools headers x86 cpufeatures: Sync with the kernel sources to pick TDX, Zen, APIC MSR fence changes tools headers UAPI: Sync unistd.h to pick {list,stat}mount, lsm_{[gs]et_self_attr,list_modules} syscall numbers perf vendor events intel: Alderlake/sapphirerapids metric fixes tools headers UAPI: Sync kvm headers with the kernel sources perf tools: Fix calloc() arguments to address error introduced in gcc-14 perf top: Remove needless malloc(0) call that triggers -Walloc-size perf build: Make minimal shellcheck version to v0.6.0 tools headers UAPI: Update tools's copy of drm.h headers to pick DRM_IOCTL_MODE_CLOSEFB perf test shell daemon: Make signal test less racy perf test shell script: Fix test for python being disabled perf test: Workaround debug output in list test perf list: Add output file option perf list: Switch error message to pr_err() to respect debug settings (-v) perf test: Fix 'perf script' tests on s390 tools headers UAPI: Sync linux/fcntl.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources to pick IA32_MKTME_KEYID_PARTITIONING ...
-
