- 22 Nov, 2016 7 commits
-
-
Sean Young authored
Tested with a homebrew serial ir. Remove last remmants of the nslu2 which could not be enabled, and fix checkpatch warnings. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Hans Verkuil authored
Some CEC adapters will receive messages that they initiated. Add a check that will ignore such messages. Most hardware behaves correctly in this respect, but I have seen adapters that don't, so just filter this out in the framework. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Minghsiu Tsai authored
It can fix known problems with embedded video_device structs. Signed-off-by:
Minghsiu Tsai <minghsiu.tsai@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake "unnsupported" to "unsupported" in debug message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hans Verkuil authored
The maximum 'Max TMDS Rate' in the HDMI VSDB block is 340 MHz, not 600. Higher rates are advertised in the HDMI Forum VSDB block. So lower the Max TMDS rate in the HDMI VSDB block that the vivid driver uses to 300 MHz, which is typical of most HDMI 1.4b devices. Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 4.9-rc6 * tag 'v4.9-rc6': (305 commits) Linux 4.9-rc6 ext4: sanity check the block and cluster size at mount time fscrypto: don't use on-stack buffer for key derivation fscrypto: don't use on-stack buffer for filename encryption i2c: i2c-mux-pca954x: fix deselect enabling for device-tree kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr KVM: async_pf: avoid recursive flushing of work items kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use KVM: Disable irq while unregistering user notifier KVM: x86: do not go through vcpu in __get_kvmclock_ns MAINTAINERS: Add LED subsystem co-maintainer crypto: algif_hash - Fix NULL hash crash with shash powerpc/mm: Fix missing update of HID register on secondary CPUs KVM: arm64: Fix the issues when guest PMCCFILTR is configured arm64: KVM: pmu: Fix AArch32 cycle counter access powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1 i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc' Revert "drm/mediatek: set vblank_disable_allowed to true" ...
-
- 21 Nov, 2016 12 commits
-
-
Paul Bolle authored
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h Remove another reduntdant include, that managed to sneak by commit 97139d4a ("treewide: remove redundant #include <linux/kconfig.h>"). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Sean Young authored
Many lirc drivers have their own receive buffers which are freed on unplug (e.g. ir_lirc_unregister). This means that ir->buf->wait_poll will be freed directly after unplug so do not remove yourself from the wait queue. Signed-off-by:
-
Sean Young authored
If you unplug an lirc device while reading from it, you will get an use after free as the cdev is freed while still in use. Signed-off-by:
-
Sean Young authored
[ 101.457944] ------------[ cut here ]------------ [ 101.457954] WARNING: CPU: 3 PID: 1819 at kernel/sched/core.c:7708 __might_sleep+0x7e/0x80 [ 101.457960] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffc0364bc2>] lirc_dev_fop_read+0x292/0x4e0 [lirc_dev] Signed-off-by:
-
Sean Young authored
In learning mode, you can get much longer messages which can run out of lengths. The usb message will slightly larger. Signed-off-by:
-
Sean Young authored
The wideband receiver is a little awkward on the redrat3. Data arrives on a different endpoint, and the learning command must be reissued every time data is learned. Signed-off-by:
-
Sean Young authored
If redrat3_delete() is called, ensure ep_in and udev members are set up so we don't dereference null in the error path. Also ensure that rc dev device exists before we enable the receiver and that the led urb exists before we create the led device. Signed-off-by:
-
Sean Young authored
Cleanup the error logic, removing checks for things that should be always initialized when the routines are called, and remove some bogus messages. [mchehab@s-opensource.com: fix some merge conflicts] Signed-off-by:
-
Sean Young authored
No need to duplicate these in the rc name. Signed-off-by:
-
Sean Young authored
Rename the pnp driver in sysfs from /sys/bus/pnp/drivers/Winbond CIR to /sys/bus/pnp/drivers/winbond-cir Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Wei Yongjun authored
'buf' is malloced in dibusb_rc_query() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: ff1c1235 ("[media] dibusb: handle error code on RC query") Signed-off-by:
-
- 20 Nov, 2016 7 commits
-
-
Linus Torvalds authored
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A few more ARM fixes: - the assembly backtrace code suffers problems with the new printk() implementation which assumes that kernel messages without KERN_CONT should have newlines inserted between them. Fix this. - fix a section naming error - ".init.text" rather than ".text.init" - preallocate DMA debug memory at core_initcall() time rather than fs_initcall(), as we have some core drivers that need to use DMA mapping - and that triggers a kernel warning from the DMA debug code. - fix XIP kernels after the ro_after_init changes made this data permanently read-only" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: Fix XIP kernels ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall ARM: 8624/1: proc-v7m.S: fix init section name ARM: fix backtrace -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Again a set of smaller fixes across several platforms (OMAP, Marvell, Allwinner, i.MX, etc). A handful of typo fixes and smaller missing contents from device trees, with some tweaks to OMAP mach files to deal with CPU feature print misformatting, potential NULL ptr dereference and one setup issue with UARTs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc' ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage ARM: omap3: Add missing memory node in SOM-LV arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers arm64: dts: marvell: fix clocksource for CP110 slave SPI0 arm64: dts: marvell: Fix typo in label name on Armada 37xx ASoC: omap-abe-twl6040: fix typo in bindings documentation dts: omap5: board-common: enable twl6040 headset jack detection dts: omap5: board-common: add phandle to reference Palmas gpadc ARM: OMAP2+: avoid NULL pointer dereference ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask ARM: dts: omap3: Fix memory node in Torpedo board ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig ARM: OMAP3: Fix formatting of features printed ARM: dts: imx53-qsb: Fix regulator constraints ARM: dts: sun8i: fix the pinmux for UART1
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A security fix (so a maliciously corrupted file system image won't panic the kernel) and some fixes for CONFIG_VMAP_STACK" * tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: sanity check the block and cluster size at mount time fscrypto: don't use on-stack buffer for key derivation fscrypto: don't use on-stack buffer for filename encryption
-
Theodore Ts'o authored
If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by:
Borislav Petkov <bp@alien8.de> Reported-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Eric Biggers authored
With the new (in 4.9) option to use a virtually-mapped stack (CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for the scatterlist crypto API because they may not be directly mappable to struct page. get_crypt_info() was using a stack buffer to hold the output from the encryption operation used to derive the per-file key. Fix it by using a heap buffer. This bug could most easily be observed in a CONFIG_DEBUG_SG kernel because this allowed the BUG in sg_set_buf() to be triggered. Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
With the new (in 4.9) option to use a virtually-mapped stack (CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for the scatterlist crypto API because they may not be directly mappable to struct page. For short filenames, fname_encrypt() was encrypting a stack buffer holding the padded filename. Fix it by encrypting the filename in-place in the output buffer, thereby making the temporary buffer unnecessary. This bug could most easily be observed in a CONFIG_DEBUG_SG kernel because this allowed the BUG in sg_set_buf() to be triggered. Cc: stable@vger.kernel.org Signed-off-by:
-
- 19 Nov, 2016 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Some I2C driver bugfixes (and one documentation fix)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-mux-pca954x: fix deselect enabling for device-tree i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare i2c: mux: fix up dependencies i2c: Documentation: i2c-topology: fix minor whitespace nit i2c: mux: demux-pinctrl: make drivers with no pinctrl work again
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - Fix handling of the 32bit cycle counter - Fix cycle counter filtering x86: - Fix a race leading to double unregistering of user notifiers - Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead - Use SRCU around kvm_lapic_set_vapic_addr - Avoid recursive flushing of asynchronous page faults - Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP - Let userspace know that KVM_GET_CLOCK is useful with master clock; 4.9 changed the return value to better match the guest clock, but didn't provide means to let guests take advantage of it" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr KVM: async_pf: avoid recursive flushing of work items kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use KVM: Disable irq while unregistering user notifier KVM: x86: do not go through vcpu in __get_kvmclock_ns KVM: arm64: Fix the issues when guest PMCCFILTR is configured arm64: KVM: pmu: Fix AArch32 cycle counter access -
Alex Hemme authored
Deselect functionality can be ignored for device-trees with "i2c-mux-idle-disconnect" entries if no platform_data is available. By enabling the deselect functionality outside the platform_data block the logic works as it did in previous kernels. Fixes: 7fcac980 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
Alex Hemme <ahemme@cisco.com> Signed-off-by:
Ziyang Wu <ziywu@cisco.com> [touched up a few minor issues /peda] Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fixes marked for stable: - fix system reset interrupt winkle wakeups - fix setting of AIL in hypervisor mode Fixes for code merged this cycle: - fix exception vector build with 2.23 era binutils - fix missing update of HID register on secondary CPUs Other: - fix missing pr_cont()s - invalidate ERAT on tlbiel for POWER9 DD1" * tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Fix missing update of HID register on secondary CPUs powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1 powerpc/64: Fix setting of AIL in hypervisor mode powerpc/oops: Fix missing pr_cont()s in instruction dump powerpc/oops: Fix missing pr_cont()s in show_regs() powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al. powerpc/oops: Fix missing pr_cont()s in show_stack() powerpc: Fix exception vector build with 2.23 era binutils powerpc/64s: Fix system reset interrupt winkle wakeups
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Compiler warning in caam driver that was the last one remaining - Do not register aes-xts in caam drivers on unsupported platforms - Regression in algif_hash interface that may lead to an oops" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_hash - Fix NULL hash crash with shash crypto: caam - fix type mismatch warning crypto: caam - do not register AES-XTS mode on LP units
-
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-ledsLinus Torvalds authored
Pull LED subsystem update from Jacek Anaszewski: "I'd like to announce a new co-maintainer - Pavel Machek" * tag 'leds_4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Add LED subsystem co-maintainer
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "Some driver fixes which we pending in my tree: - return error code fix in edma driver - Kconfig fix for genric allocator in mmp_tdma - fix uninitialized value in sun6i - Runtime pm fixes for cppi" * tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: cppi41: More PM runtime fixes dmaengine: cpp41: Fix handling of error path dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected dmaengine: cppi41: Fix list not empty warning on module removal dmaengine: sun6i: fix the uninitialized value for v_lli dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig dmaengine: edma: Fix error return code in edma_alloc_chan_resources()
-
Paolo Bonzini authored
kvm_arch_set_irq is unused since commit b97e6de9. Merge its functionality with kvm_arch_set_irq_inatomic. Reported-by:
Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com>
-
Paolo Bonzini authored
Reported by syzkaller: [ INFO: suspicious RCU usage. ] 4.9.0-rc4+ #47 Not tainted ------------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! stack backtrace: CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000 0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9 ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445 [< inline >] __kvm_memslots include/linux/kvm_host.h:534 [< inline >] kvm_memslots include/linux/kvm_host.h:541 [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941 [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217 Reported-by:Dmitry Vyukov <dvyukov@google.com> Fixes: fda4e2e8 Cc: Andrew Honig <ahonig@google.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
This was reported by syzkaller: [ INFO: possible recursive locking detected ] 4.9.0-rc4+ #49 Not tainted --------------------------------------------- kworker/2:1/5658 is trying to acquire lock: ([ 1644.769018] (&work->work) [< inline >] list_empty include/linux/compiler.h:243 [<ffffffff8128dd60>] flush_work+0x0/0x660 kernel/workqueue.c:1511 but task is already holding lock: ([ 1644.769018] (&work->work) [<ffffffff812916ab>] process_one_work+0x94b/0x1900 kernel/workqueue.c:2093 stack backtrace: CPU: 2 PID: 5658 Comm: kworker/2:1 Not tainted 4.9.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events async_pf_execute ffff8800676ff630 ffffffff81c2e46b ffffffff8485b930 ffff88006b1fc480 0000000000000000 ffffffff8485b930 ffff8800676ff7e0 ffffffff81339b27 ffff8800676ff7e8 0000000000000046 ffff88006b1fcce8 ffff88006b1fccf0 Call Trace: ... [<ffffffff8128ddf3>] flush_work+0x93/0x660 kernel/workqueue.c:2846 [<ffffffff812954ea>] __cancel_work_timer+0x17a/0x410 kernel/workqueue.c:2916 [<ffffffff81295797>] cancel_work_sync+0x17/0x20 kernel/workqueue.c:2951 [<ffffffff81073037>] kvm_clear_async_pf_completion_queue+0xd7/0x400 virt/kvm/async_pf.c:126 [< inline >] kvm_free_vcpus arch/x86/kvm/x86.c:7841 [<ffffffff810b728d>] kvm_arch_destroy_vm+0x23d/0x620 arch/x86/kvm/x86.c:7946 [< inline >] kvm_destroy_vm virt/kvm/kvm_main.c:731 [<ffffffff8105914e>] kvm_put_kvm+0x40e/0x790 virt/kvm/kvm_main.c:752 [<ffffffff81072b3d>] async_pf_execute+0x23d/0x4f0 virt/kvm/async_pf.c:111 [<ffffffff8129175c>] process_one_work+0x9fc/0x1900 kernel/workqueue.c:2096 [<ffffffff8129274f>] worker_thread+0xef/0x1480 kernel/workqueue.c:2230 [<ffffffff812a5a94>] kthread+0x244/0x2d0 kernel/kthread.c:209 [<ffffffff831f102a>] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 The reason is that kvm_put_kvm is causing the destruction of the VM, but the page fault is still on the ->queue list. The ->queue list is owned by the VCPU, not by the work items, so we cannot just add list_del to the work item. Instead, use work->vcpu to note async page faults that have been resolved and will be processed through the done list. There is no need to flush those. Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: -
Paolo Bonzini authored
Userspace can read the exact value of kvmclock by reading the TSC and fetching the timekeeping parameters out of guest memory. This however is brittle and not necessary anymore with KVM 4.11. Provide a mechanism that lets userspace know if the new KVM_GET_CLOCK semantics are in effect, and---since we are at it---if the clock is stable across all VCPUs. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Ignacio Alvarado authored
Function user_notifier_unregister should be called only once for each registered user notifier. Function kvm_arch_hardware_disable can be executed from an IPI context which could cause a race condition with a VCPU returning to user mode and attempting to unregister the notifier. Signed-off-by:
Ignacio Alvarado <ikalvarado@google.com> Cc: stable@vger.kernel.org Fixes: 18863bdd ("KVM: x86 shared msr infrastructure") Reviewed-by:
-
Paolo Bonzini authored
Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with a KVM_GET_CLOCK immediately after, without letting the VCPU run and call kvm_guest_time_update. To fix this, compute the kvmclock value ourselves, using the master clock (tsc, nsec) pair as the base and the host CPU frequency as the scale. Reported-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmRadim Krčmář authored
KVM/ARM updates for v4.9-rc6 - Fix handling of the 32bit cycle counter - Fix cycle counter filtering
-
