- 22 Apr, 2019 10 commits
-
-
Helen Fornazier authored
Media bus codes were being mapped to pixelformats, which causes a limitation on vimc because not all pixelformats can be mapped to media bus codes. Also, media bus codes are an internal configuration from the device. Userspace only assures media bus codes matches between pads and expects the image in a given pixelformat. So we can allow almost any media bus format to be configured between pads, except for debayer that expects a media bus code of type bayer in the sink pad. [hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available] [hverkuil-cisco@xs4all.nl: made vimc_mbus_list static] Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Helen Fornazier authored
Add bayer format information in struct v4l2_format_info table. Signed-off-by:
-
Ezequiel Garcia authored
Add two new API helpers, v4l2_fill_pixfmt and v4l2_fill_pixfmt_mp, to be used by drivers to calculate plane sizes and bytes per lines. Note that driver-specific padding and alignment are not taken into account, and must be done by drivers using this API. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
The rockchip VPU driver uses generic names for its pixel format helpers. We want to use the same names for generic versions of these helpers, so rename the rockchip ones. The driver will be switched to the generic helpers later. Signed-off-by:
-
Ezequiel Garcia authored
Minor fix for helper function and comment, s/v4l2_vb2_buffer/vb2_v4l2_buffer. Signed-off-by:
-
Hans Verkuil authored
Somehow the string "Controls name" got pasted in two places where it doesn't belong. Remove that text. Signed-off-by:
-
Yannick Fertre authored
It is mandatory to write CEC_CFGR only when CECEN=0. To protect transmission, a check have been added to delayed logical address modification. This patch is necessary tp pass all tests of compliance. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Eugen Hristev authored
ISC will output the "ARGB32" configuration in byte order: B, G, R, Alpha. This is in fact the format BGRA, aka ABGR32. If alpha is missing, the same format is equivalent to XBGR32. Added both formats and removed ARGB32 which is wrong. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
This change is a redesign in the formats and the way the ISC is configured w.r.t. sensor format and the output format from the ISC. I have changed the splitting between sensor output (which is also ISC input) and ISC output. The sensor format represents the way the sensor is configured, and what ISC is receiving. The format configuration represents the way ISC is interpreting the data and formatting the output to the subsystem. Now it's much easier to figure out what is the ISC configuration for input, and what is the configuration for output. The non-raw format can be obtained directly from sensor or it can be done inside the ISC. The controller format list will include a configuration for each format. The old supported formats are still in place, if we want to dump the sensor format directly to the output, the try format routine will detect and configure the pipeline accordingly. This also fixes the previous issues when the raw format was NULL which resulted in many crashes for sensors which did not have the expected/tested formats. Signed-off-by:
-
Fish Lin authored
Add following V4L2 QP parameters for H.264: * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP * V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP These controls will limit QP range for intra and inter frame, provide more manual control to improve video encode quality. Signed-off-by:
Fish Lin <linfish@google.com> Signed-off-by:
-
- 30 Mar, 2019 4 commits
-
-
Mauro Carvalho Chehab authored
With LaTex, the Index at the end will always be present. Having an extra chapter for it there will just add extra noise to the document. Signed-off-by: -
Mauro Carvalho Chehab authored
Avoid cell overlapping by changing some sizes, and changing the font sizes when needed. Tested with Sphinx 1.7.8. Signed-off-by: -
Mauro Carvalho Chehab authored
Some lines inside this table has more than 34 columns, which isn't what is expected, according to the .. tabularcolumns:: definition. That causes the PDF output to fail. This patch ensures that all columns will have exactly the same size, merging the unused ones using :cpan: Signed-off-by: -
Mauro Carvalho Chehab authored
There are a few left overs at staging which were still using the deprecated strlcpy() function. Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
- 29 Mar, 2019 20 commits
-
-
Sakari Ailus authored
Remove a few files left over from the mt9t031 driver. While at it, add a TODO file for the SoC camera framework as a whole. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
The SoC camera was moved to the staging tree but we missed updating MAINTAINERS. Do that now. Fixes: 280de94a ("media: soc_camera: Move to the staging tree") Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Akinobu Mita authored
The exposure control is clustered with the autoexposure control and flagged as volatile, but the g_volatile_ctrl() doesn't handle V4L2_CID_EXPOSURE_AUTO. So, the value of the exposure control can't be read in autoexposure mode. This enables to get the exposure control in autoexposure mode by making ov7740_get_volatile_ctrl() deal with V4L2_CID_EXPOSURE_AUTO. This also sets the exposure control as volatile by specifying the argument to v4l2_ctrl_auto_cluster() instead of manually flagging it. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of doing the cast, just change the type to char. Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
The strncpy() function is being deprecated upstream. Replace it by the safer strscpy(). While here, replace a few occurences of strlcpy() that were recently added to also use strscpy(). Reviewed-by:
-
Mauro Carvalho Chehab authored
The support for those two formats are archtecture-dependent. Use the endianness to CPU macros to do it right. Signed-off-by: -
Dan Carpenter authored
The st_register() returns have changed over time, but these days it never returns -1. We should just be checking for any negative error codes. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
Smatch marks skb->data as untrusted so it warns that "evt_hdr->dlen" can copy up to 255 bytes and we only have room for two bytes. Even if this comes from the firmware and we trust it, the new policy generally is just to fix it as kernel hardenning. I can't test this code so I tried to be very conservative. I considered not allowing "evt_hdr->dlen == 1" because it doesn't initialize the whole variable but in the end I decided to allow it and manually initialized "asic_id" and "asic_ver" to zero. Fixes: e8454ff7 ("[media] drivers:media:radio: wl128x: FM Driver Common sources") Signed-off-by:
-
YueHaibing authored
'vb' null check should be done before dereferencing it in tw5864_handle_frame, otherwise a NULL pointer dereference may occur. Fixes: 34d1324e ("[media] pci: Add tw5864 driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kangjie Lu authored
In case usb_alloc_coherent fails, the fix returns -ENOMEM to avoid a potential NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Kangjie Lu authored
devm_kcalloc may fail and return a null pointer. The fix returns -ENOMEM upon failures to avoid null pointer dereferences. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Alexandre Courbot authored
This member is never read throughout the code, so remove it. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
Commit 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") fixed the return types for mem2mem buffer helper functions by changing a few local variables from vb2_buffer to vb2_v4l2_buffer. However, it left a few accesses to vb2_buffer::planes as-is, accidentally turning them into accesses to vb2_v4l2_buffer::planes and resulting in values being read from/written to the wrong place. Fix this by inserting vb2_buf into these accesses so they mimic their original behavior. Fixes: 0650a914 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers") Signed-off-by:
-
Dan Carpenter authored
This code generates a static checker warning: drivers/media/v4l2-core/v4l2-ctrls.c:2921 v4l2_querymenu() warn: should '(1 << i)' be a 64 bit type? The problem is that "ctrl->menu_skip_mask" is a u64 and we're only testing the lower 32 bits. Signed-off-by: -
Arnd Bergmann authored
clang warns about a possible variable use that gcc never complained about: drivers/media/platform/davinci/isif.c:982:32: error: variable 'frame_size' is uninitialized when used here [-Werror,-Wuninitialized] dm365_vpss_set_pg_frame_size(frame_size); ^~~~~~~~~~ drivers/media/platform/davinci/isif.c:887:2: note: variable 'frame_size' is declared here struct vpss_pg_frame_size frame_size; ^ 1 error generated. There is no initialization for this variable at all, and there has never been one in the mainline kernel, so we really should not put that stack data into an mmio register. On the other hand, I suspect that gcc checks the condition more closely and notices that the global isif_cfg.bayer.config_params.test_pat_gen flag is initialized to zero and never written to from any code path, so anything depending on it can be eliminated. To shut up the clang warning, just remove the dead code manually, it has probably never been used because any attempt to do so would have resulted in undefined behavior. Fixes: 63e3ab14 ("V4L/DVB: V4L - vpfe capture - source for ISIF driver on DM365") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Koen Vandeputte authored
Building tda1997x fails now unless V4L2_FWNODE is selected: drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt' undefined reference to `v4l2_fwnode_endpoint_parse' While at it, also sort the selections alphabetically Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: stable@vger.kernel.org # v4.17+ Acked-by:
-
Arnd Bergmann authored
When CONFIG_DEBUGFS is enabled, we get a warning about an incorrect section annotation that can lead to undefined behavior: WARNING: vmlinux.o(.text+0xd3c7c4): Section mismatch in reference from the function mipi_csis_probe() to the function .init.text:mipi_csis_debugfs_init() The function mipi_csis_probe() references the function __init mipi_csis_debugfs_init(). This is often because mipi_csis_probe lacks a __init annotation or the annotation of mipi_csis_debugfs_init is wrong. The same function for an unknown reason has a different version for !CONFIG_DEBUGFS, which does not have this problem, but behaves the same way otherwise (it does nothing when debugfs is disabled). Consolidate the two versions, using the correct section from one version, and the implementation from the other. Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
clang is unable to optimize the isif_ioctl() in the same way that gcc does, as it fails to prove that the local copy of the 'struct vpfe_isif_raw_config' argument is unnecessary: drivers/staging/media/davinci_vpfe/dm365_isif.c:622:13: error: stack frame size of 1344 bytes in function 'isif_ioctl' [-Werror,-Wframe-larger-than=] Marking it as 'const' while passing the data down clearly shows us that the copy is never modified, and we can skip copying it entirely, which reduces the stack usage to just eight bytes. Signed-off-by:
-
Lucas Leonardo Ciancaglini authored
Small readability changes to make the breaking of some lines cleaner. Signed-off-by:
Lucas Leonardo Ciancaglini <leociancalucas@gmail.com> Signed-off-by:
-
Ezequiel Garcia authored
In order to prevent ISOC URBs from being infinitely resubmitted, the driver's USB disconnect handler must kill all the in-flight URBs. While here, change the URB packet status message to a debug level, to avoid spamming the console too much. This commit fixes a lockup caused by an interrupt storm coming from the URB completion handler. Signed-off-by:
-
- 28 Mar, 2019 1 commit
-
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/media/dvb-core/dvbdev.c: drivers/media/dvb-core/dvbdev.c:529 dvb_register_device() error: double unlock 'sem:&minor_rwsem' Reported-by:
-
- 25 Mar, 2019 5 commits
-
-
Mauro Carvalho Chehab authored
Smatch warns about small size on two structs: drivers/media/platform/qcom/venus/hfi_parser.c:103 parse_profile_level() error: memcpy() 'proflevel' too small (8 vs 128) drivers/media/platform/qcom/venus/hfi_parser.c: drivers/media/platform/qcom/venus/hfi_parser.c:129 parse_caps() error: memcpy() 'cap' too small (16 vs 512) The reason is that the hfi_parser actually expects: - multiple data entries on hfi_capabilities - multiple profile_level on hfi_profile_level_supported However, the structs trick gcc, making it to believe that there's just one value for each. Signed-off-by: -
Mauro Carvalho Chehab authored
The only way for p_set to be NULL would be if vin_coef_set would be an empty array. On such case, the driver will OOPS, as it would try to de-reference a NULL value. So, the check if p_set is not NULL doesn't make any sense. Solves those two smatch warnings: drivers/media/platform/rcar-vin/rcar-dma.c:489 rvin_set_coeff() warn: variable dereferenced before check 'p_set' (see line 484) drivers/media/platform/rcar-vin/rcar-dma.c:494 rvin_set_coeff() error: we previously assumed 'p_set' could be null (see line 489) Signed-off-by: -
Mauro Carvalho Chehab authored
At the error logic, ipc_buf was already asigned to &ctx->ipc_buf_struct, with can't be null, as warned by smatch: drivers/media/platform/sti/delta/delta-ipc.c:223 delta_ipc_open() warn: variable dereferenced before check 'ctx->ipc_buf' (see line 183) So, remove the uneeded check. Signed-off-by: -
Mauro Carvalho Chehab authored
The way the code works, compression will be a valid value (less or equal to 3) on both set_video_mode_foo() calls at the beginning of the while() loop. So, the value for pChoose can't be NULL. Solves those smatch warnings: drivers/media/usb/pwc/pwc-ctrl.c: drivers/media/usb/pwc/pwc-ctrl.c:252 set_video_mode_Timon() warn: variable dereferenced before check 'pChoose' (see line 248) drivers/media/usb/pwc/pwc-ctrl.c: drivers/media/usb/pwc/pwc-ctrl.c:302 set_video_mode_Kiara() warn: variable dereferenced before check 'pChoose' (see line 298) and simplifies the code a little bit. Signed-off-by: -
Mauro Carvalho Chehab authored
There are some macros at cx2341x_update() with seemed to be introduced in order to ensure that lines would be less than 80 columns. Well, the thing is that they make the code harder to be analized, not only by humans, but also for static code analyzers: drivers/media/common/cx2341x.c:1116 cx2341x_update() error: we previously assumed 'old' could be null (see line 1047) So, remove the "force" var, and replace the NEQ macro to a better designed one that makes clearer about what it is doing. While here, also remove the "temporal" var, as it is just another way of doing the same type of check as the new CMP_FIELD() macro already does. Finally, fix coding style at the block code. remove such macros. Signed-off-by:
-
