- 10 Oct, 2019 2 commits
-
-
Hannes Reinecke authored
Some arrays are not capable of returning RTPG data during state transitioning, but rather return an 'LUN not accessible, asymmetric access state transition' sense code. In these cases we can set the state to 'transitioning' directly and don't need to evaluate the RTPG data (which we won't have anyway). Link: https://lore.kernel.org/r/20191007135701.32389-1-hare@suse.deReviewed-by:
Laurence Oberman <loberman@redhat.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Allen Pais authored
alloc_workqueue is not checked for errors and as a result a potential NULL dereference could occur. Link: https://lore.kernel.org/r/1568824618-4366-1-git-send-email-allen.pais@oracle.comSigned-off-by:
Allen Pais <allen.pais@oracle.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
- 04 Oct, 2019 3 commits
-
-
Himanshu Madhani authored
Update maintainer entry for qla2xxx driver now that email addresses have been changed to Marvell. Link: https://lore.kernel.org/r/20191001153338.28765-1-hmadhani@marvell.comSigned-off-by:
-
Steffen Maier authored
On excessive bit errors for the FCP channel ingress fibre path, the channel notifies us. Previously, we only emitted a kernel message and a trace record. Since performance can become suboptimal with I/O timeouts due to bit errors, we now stop using an FCP device by default on channel notification so multipath on top can timely failover to other paths. A new module parameter zfcp.ber_stop can be used to get zfcp old behavior. User explanation of new kernel message: * Description: * The FCP channel reported that its bit error threshold has been exceeded. * These errors might result from a problem with the physical components * of the local fibre link into the FCP channel. * The problem might be damage or malfunction of the cable or * cable connection between the FCP channel and * the adjacent fabric switch port or the point-to-point peer. * Find details about the errors in the HBA trace for the FCP device. * The zfcp device driver closed down the FCP device * to limit the performance impact from possible I/O command timeouts. * User action: * Check for problems on the local fibre link, ensure that fibre optics are * clean and functional, and all cables are properly plugged. * After the repair action, you can manually recover the FCP device by * writing "0" into its "failed" sysfs attribute. * If recovery through sysfs is not possible, set the CHPID of the device * offline and back online on the service element. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: <stable@vger.kernel.org> #2.6.30+ Link: https://lore.kernel.org/r/20191001104949.42810-1-maier@linux.ibm.comReviewed-by:
Jens Remus <jremus@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
-
Damien Le Moal authored
When a non-passthrough command is terminated with CHECK CONDITION, request sense is executed by hijacking the command descriptor. Since scsi_eh_prep_cmnd() and scsi_eh_restore_cmnd() do not save/restore the original command resid, the value returned on failure of the original command is lost and replaced with the value set by the execution of the request sense command. This value may in many instances be unaligned to the device sector size, causing sd_done() to print a warning message about the incorrect unaligned resid before the command is retried. Fix this problem by saving the original command residual in struct scsi_eh_save using scsi_eh_prep_cmnd() and restoring it in scsi_eh_restore_cmnd(). In addition, to make sure that the request sense command is executed with a correctly initialized command structure, also reset the residual to 0 in scsi_eh_prep_cmnd() after saving the original command value in struct scsi_eh_save. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191001074839.1994-1-damien.lemoal@wdc.comSigned-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
- 01 Oct, 2019 2 commits
-
-
Daniel Wagner authored
Commit 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") introduced the WARN_ON_ONCE in qla2x00_status_cont_entry(). The assumption was that there is only one status continuations element. According to the firmware documentation it is possible that multiple status continuations are emitted by the firmware. Fixes: 88263208 ("scsi: qla2xxx: Complain if sp->done() is not called from the completion path") Link: https://lore.kernel.org/r/20190927073031.62296-1-dwagner@suse.de Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
Oliver Neukum authored
I've got a report about a UAS drive enclosure reporting back Sense: Logical unit access not authorized if the drive it holds is password protected. While the drive is obviously unusable in that state as a mass storage device, it still exists as a sd device and when the system is asked to perform a suspend of the drive, it will be sent a SYNCHRONIZE CACHE. If that fails due to password protection, the error must be ignored. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190903101840.16483-1-oneukum@suse.comSigned-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
- 24 Sep, 2019 13 commits
-
-
Quinn Tran authored
For N2N, the NPort ID is assigned by driver in the PLOGI ELS. According to FW Spec the byte order for SID is not the same as DID. Link: https://lore.kernel.org/r/20190912180918.6436-8-hmadhani@marvell.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Tested-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
During link up/bounce, qla driver would do command flush as part of cleanup. In this case, the flush can intefere with FW state. This patch allows FW to be in control of link up. Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
Fix stalled link recovery for N2N with FC-NVMe connection. Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
In the case of NPIV port is being torn down, this patch will set a flag to indicate VPORT_DELETE. This would prevent relogin to be triggered. Link: https://lore.kernel.org/r/20190912180918.6436-5-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
On driver unload, 'remove_one' thread was allowed to advance, while session cleanup still lag behind. This patch ensures session deletion will finish before remove_one can advance. Link: https://lore.kernel.org/r/20190912180918.6436-4-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
There are instances, though rare, where a LOGO request cannot be sent out and the thread in free session done can wait indefinitely. Fix this by putting an upper bound to sleep. Link: https://lore.kernel.org/r/20190912180918.6436-3-hmadhani@marvell.comSigned-off-by:
-
Himanshu Madhani authored
Print if fwdt template is present or not, only when ql2xextended_error_logging is enabled. Link: https://lore.kernel.org/r/20190912180918.6436-2-hmadhani@marvell.comSigned-off-by:
-
YueHaibing authored
Fix sparse warnings: drivers/scsi/hisi_sas/hisi_sas_main.c:3686:6: warning: symbol 'hisi_sas_debugfs_release' was not declared. Should it be static? drivers/scsi/hisi_sas/hisi_sas_main.c:3708:5: warning: symbol 'hisi_sas_debugfs_alloc' was not declared. Should it be static? drivers/scsi/hisi_sas/hisi_sas_main.c:3799:6: warning: symbol 'hisi_sas_debugfs_bist_init' was not declared. Should it be static? Link: https://lore.kernel.org/r/20190923054035.19036-1-yuehaibing@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Xiang Chen authored
For pci device, need to disable device when probe failed after enabled device. Link: https://lore.kernel.org/r/1567818450-173315-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Reviewed-by:
-
Long Li authored
storvsc doesn't use a dedicated hardware queue for a given CPU queue. When issuing I/O, it selects returning CPU (hardware queue) dynamically based on vmbus channel usage across all channels. This patch advertises num_present_cpus() as number of hardware queues. This will have upper layer setup 1:1 mapping between hardware queue and CPU queue and avoid unnecessary locking when issuing I/O. Link: https://lore.kernel.org/r/1567790660-48142-1-git-send-email-longli@linuxonhyperv.comSigned-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
-
Austin Kim authored
Since tmp_prio is declared as u8, the following statement is always false. tmp_prio < 0 So remove 'always false' statement. Link: https://lore.kernel.org/r/20190919075548.GA112801@LGEARND20B15Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Acked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Stanley Chu authored
In some cases, hba may go through shutdown flow without successful initialization and then make system hang. For example, if ufshcd_change_power_mode() gets error and leads to ufshcd_hba_exit() to release resources of the host, future shutdown flow may hang the system since the host register will be accessed in unpowered state. To solve this issue, simply add checking to skip shutdown for above kind of situation. Link: https://lore.kernel.org/r/1568780438-28753-1-git-send-email-stanley.chu@mediatek.comSigned-off-by:
Stanley Chu <stanley.chu@mediatek.com> Acked-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
Laurence Oberman authored
The qla2xxx driver had this issue as well when the newer array firmware returned the retry_delay_timer in the fcp_rsp. The bnx2fc is not handling the masking of the scope bits either so the retry_delay_timestamp value lands up being a large value added to the timer timestamp delaying I/O for up to 27 Minutes. This patch adds similar code to handle this to the bnx2fc driver to avoid the huge delay. Link: https://lore.kernel.org/r/1568210202-12794-1-git-send-email-loberman@redhat.comSigned-off-by:
David Jeffery <djeffery@redhat.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 11 Sep, 2019 16 commits
-
-
Xiang Chen authored
When device gone, it will check whether it is during reset, if not, it will send internal task abort. Before internal task abort returned, reset begins, and it will check whether SAS_PHY_UNUSED is set, if not, it will call hisi_sas_init_device(), but at that time domain_device may already be freed or part of it is freed, so it may referenece null pointer in hisi_sas_init_device(). It may occur as follows: thread0 thread1 hisi_sas_dev_gone() check whether in RESET(no) internal task abort reset prep soft_reset ... (part of reset_done) internal task abort failed release resource anyway clear_itct device->lldd_dev=NULL hisi_sas_reset_init_all_device check sas_dev->dev_type is SAS_PHY_UNUSED and !device set dev_type SAS_PHY_UNUSED sas_free_device hisi_sas_init_device ... Semaphore hisi_hba.sema is used to sync the processes of device gone and host reset. To solve the issue, expand the scope that semaphore protects and let them never occur together. And also some places will check whether domain_device is NULL to judge whether the device is gone. So when device gone, need to clear sas_dev->sas_device. Link: https://lore.kernel.org/r/1567774537-20003-14-git-send-email-john.garry@huawei.comSigned-off-by: -
Xiang Chen authored
Add BIST (built in self test) support for phy loopback. Through the new debugfs interface, the user can configure loopback mode/linkrate/phy id/code mode before enabling it. And also user can enable/disable BIST function. Link: https://lore.kernel.org/r/1567774537-20003-13-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
We extract the code of memory allocate and construct an new function for it. We think it's convenient for subsequent optimization. Link: https://lore.kernel.org/r/1567774537-20003-12-git-send-email-john.garry@huawei.comSigned-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
Some function arguments are unused, so remove them. Also move the timeout print in for wait_cmds_complete_timeout_vX_hw() callsites into that same function. Link: https://lore.kernel.org/r/1567774537-20003-11-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
Remove redundant work declaration in HISI_SAS_DECLARE_RST_WORK_ON_STACK Link: https://lore.kernel.org/r/1567774537-20003-10-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
We never call hisi_sas_hw.slot_complete, so remove it. Link: https://lore.kernel.org/r/1567774537-20003-9-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
Currently the NCQ tag is only assigned for FPDMA READ and FPDMA WRITE commands, and for other NCQ commands (such as FPDMA SEND), their NCQ tags are set in the delivery command to 0. So for all the NCQ commands, we also need to assign normal NCQ tag for them, so drop the command type check in hisi_sas_get_ncq_tag() [drop hisi_sas_get_ncq_tag() altogether actually], and always use the ATA command NCQ tag when appropriate. Link: https://lore.kernel.org/r/1567774537-20003-8-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
After suspend and resume, the HW registers will be set back to their initial value. We use init_reg_v3_hw() to set some registers, but some registers are set via firmware in ACPI "_RST" method, so add reset handler before init_reg_v3_hw(). Link: https://lore.kernel.org/r/1567774537-20003-7-git-send-email-john.garry@huawei.comSigned-off-by:
-
Xiang Chen authored
When init device for SAS disks, it will send TMF IO to clear disks. At that time TMF IO is broken by some operations such as injecting controller reset from HW RAs event, the TMF IO will be timeout, and at last device will be gone. Print is as followed: hisi_sas_v3_hw 0000:74:02.0: dev[240:1] found ... hisi_sas_v3_hw 0000:74:02.0: controller resetting... hisi_sas_v3_hw 0000:74:02.0: phyup: phy7 link_rate=10(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy0 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy2 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy3 link_rate=9(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy6 link_rate=10(sata) hisi_sas_v3_hw 0000:74:02.0: phyup: phy5 link_rate=11 hisi_sas_v3_hw 0000:74:02.0: phyup: phy4 link_rate=11 hisi_sas_v3_hw 0000:74:02.0: controller reset complete hisi_sas_v3_hw 0000:74:02.0: abort tmf: TMF task timeout and not done hisi_sas_v3_hw 0000:74:02.0: dev[240:1] is gone sas: driver on host 0000:74:02.0 cannot handle device 5000c500a75a860d, error:5 To improve the reliability, retry TMF IO max of 3 times for SAS disks which is the same as softreset does. Link: https://lore.kernel.org/r/1567774537-20003-6-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
At expander environment, we delay after issue phy reset to wait for hardware to handle phy reset. But if sas_smp_phy_control() fails, the delay is unnecessary so remove it. Link: https://lore.kernel.org/r/1567774537-20003-5-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
At hisi_sas_debug_I_T_nexus_reset(), we call sas_phy_reset() to reset a phy. But if the phy is disabled, sas_phy_reset() will directly return -ENODEV without issue a phy reset request. If so, We can directly return -ENODEV to libsas before issue a phy reset. Link: https://lore.kernel.org/r/1567774537-20003-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
When calling sas_phy_reset(), we need to specify whether the reset type is hard reset or link reset - use true/false for clarity. Link: https://lore.kernel.org/r/1567774537-20003-3-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
This trigger is add at _hisi_sas_internal_task_abort() Link: https://lore.kernel.org/r/1567774537-20003-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Matt Lupfer authored
The event handler calls scsi_scan_host() when events are missed, which will hotplug new LUNs. However, this function won't remove any unplugged LUNs. The result is that hotunplug doesn't work properly when the number of unplugged LUNs exceeds the event queue size (currently 8). Scan existing LUNs when events are missed to check if they are still present. If not, remove them. Link: https://lore.kernel.org/r/20190905181903.29756-1-mlupfer@ddn.comSigned-off-by:
Matt Lupfer <mlupfer@ddn.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Martin Wilck authored
cdb in send_mode_select() is not zeroed and is only partially filled in rdac_failover_get(), which leads to some random data getting to the device. Users have reported storage responding to such commands with INVALID FIELD IN CDB. Code before commit 32782557 was not affected, as it called blk_rq_set_block_pc(). Fix this by zeroing out the cdb first. Identified & fix proposed by HPE. Fixes: 32782557 ("scsi_dh_rdac: switch to scsi_execute_req_flags()") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20190904155205.1666-1-martin.wilck@suse.comSigned-off-by:
Ales Novak <alnovak@suse.cz> Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Signed-off-by:
-
zhengbin authored
In fcoe_if_init, if fc_attach_transport(&fcoe_vport_fc_functions) fails, need to free the previously memory and return fail, otherwise will trigger null-ptr-deref Read in fc_release_transport. fcoe_exit fcoe_if_exit fc_release_transport(fcoe_vport_scsi_transport) Link: https://lore.kernel.org/r/1566279789-58207-1-git-send-email-zhengbin13@huawei.comReported-by:zhengbin <zhengbin13@huawei.com> Signed-off-by:
-
- 07 Sep, 2019 4 commits
-
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190904130457.24744-1-yuehaibing@huawei.comReported-by:
Avri Altman <avri.altman@wdc.com> Acked-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190904130348.24772-1-yuehaibing@huawei.comReported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190904130256.24704-1-yuehaibing@huawei.comReported-by:
-
YueHaibing authored
Use kmemdup rather than duplicating its implementation Link: https://lore.kernel.org/r/20190831124424.18642-1-yuehaibing@huawei.comSigned-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
