- 20 Mar, 2023 9 commits
-
-
Thomas Zimmermann authored
Instead of the DRM framebuffer, pass the FB info strcuture to the fbdev page-fault handler psb_fbdev_vm_fault(). The framebuffer is a high-level data structure and does not belong into fault handling. The fb_info has all necessary information. Also set fix.smem_start to the correct value (the beginning of the framebuffer in physical address space) and streamline the page-fault handler. v2: * remove unused struct drm_psb_private.fb_base (Patrik) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313151610.14367-8-tzimmermann@suse.de
-
Thomas Zimmermann authored
Implement fbdevemulation on top of struct drm_client and its helpers. This ad-hoc interfaces for restoring and closing fbdev emulation with per-client callback for hotplugging, restoring and unregistering. A single function, psb_fbdev_setup(), starts fbdev emulation after the DRM device has been registered. Hence, fbdev acts like a regular DRM client. The setup call only prepares the fbdev emulation. It then implements connector hotplugging. The first successful hotplug event initializes fbdev emulation. Unregistering depends on the hotplugging. Fully initialized emulation is cleaned up through drm_fb_helper_unregister_info() and fb_destroy. For prepared-only setups, unregistering unprepares the emulation and releases all resources. In both cases, fbdev emulation will be cleaned up. v2: * declare empty setup function as 'static inline' (kernel test robot) Signed-off-by:
-
Thomas Zimmermann authored
Inline psbfb_create() into its only caller psbfb_probe(). Streamline the color-depth selection. Also clean up the naming around struct drm_fb_helper_funcs. v2: * rename psbfb_probe() (Patrik) Signed-off-by:
-
Thomas Zimmermann authored
Fix some names around struct fb_ops to better fit the overall naming conventions. No functional changes. v2: * fix typo in commit message Signed-off-by:
-
Thomas Zimmermann authored
Remove fbdev emulations' open and close implementaitons for the VM. The functions are empty. Also update the naming of the VMA code. Signed-off-by:
-
Thomas Zimmermann authored
Move the fbdev emulation from framebuffer.c to fbdev.c. Only build the source code if the Kconfig symbol has been selected. Remaining in framebuffer.c is gma500's code for DRM framebuffers. No functional changes. v2: * remove 'extern' from function declaration (Patrik) * declare empty init/fini functions as 'static inline' (kernel test robot) * rebase onto vm_flags_set() * typo fixes in commit message Signed-off-by:
-
Thomas Zimmermann authored
Remove unnecessary include statements from framebuffer.c. No functional changes. Signed-off-by:
-
Adam Ford authored
When dynamically switching lanes was removed, the intent of the code was to check to make sure that higher speed items used 4 lanes, but it had the unintended consequence of removing the slower speeds for 4-lane users. This attempts to remedy this by doing a check to see that the max frequency doesn't exceed the chip limit, and a second check to make sure that the max bit-rate doesn't exceed the number of lanes * max bit rate / lane. Fixes: 9a0cdcd6 ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge") Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/gpu/drm/bridge/sii9234.c:870:31: error: unused function 'bridge_to_sii9234' [-Werror,-Wunused-function] static inline struct sii9234 *bridge_to_sii9234(struct drm_bridge *bridge) ^ This static function is not used, so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
- 18 Mar, 2023 1 commit
-
-
Simon Ser authored
This was pointed out by Ville and Pekka in their replies, but forgot to apply the change properly before pushing. Sorry for the noise! Signed-off-by:
Simon Ser <contact@emersion.fr> Fixes: 409f07d3 ("drm: document connector margin properties") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230305103503.42619-1-contact@emersion.fr
-
- 17 Mar, 2023 4 commits
-
-
Javier Martinez Canillas authored
There's a nice macro to calculate the destination pitch that already takes into account sub-byte pixel formats. Use that instead of open coding it. Suggested-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Yang Li authored
According to commit 7945f929 ("drivers: provide devm_platform_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to Use devm_platform_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(drm->dev)', 'drm->dev' is equivalent to 'pdev->deva'. Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(dev)', 'pdev->dev' is equivalent to 'dev'. Signed-off-by:
-
Lee Jones authored
'bulk' description taken from another in the same file. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_bo.c:98: warning: Function parameter or member 'bulk' not described in 'ttm_bo_set_bulk_move' drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space' drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Excess function parameter 'proposed_placement' description in 'ttm_bo_mem_space' Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 16 Mar, 2023 5 commits
-
-
Arthur Grillo authored
This test case uses an arbitrary pitch size, different of the default one, to test if the conversions methods obey. Change the "destination_pitch" colors to change the monochrome expected result from being just zeros, as this makes the arbitrary pitch use unusable. Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
-
Arthur Grillo authored
Extend the existing test cases to test the conversion from XRGB8888 to monochromatic. Signed-off-by:
-
Tom Rix authored
gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes] 49 | wpr_generic_header_dump(struct nvkm_subdev *subdev, | ^~~~~~~~~~~~~~~~~~~~~~~ wpr_generic_header_dump is only used in acr.c, so it should be static Signed-off-by:Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18: warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static? nvkm_engn_cgrp_get is only used in runl.c, so it should be static Signed-off-by:
-
Tom Rix authored
gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error: no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes] 451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index) | ^~~~~~~~~~~~~~~~~~~~~~~~~ gf100_fifo_nonstall_block is only used in gf100.c, so it should be static Signed-off-by:
-
- 15 Mar, 2023 7 commits
-
-
Zack Rusin authored
The src/dst_pitch got mixed up during the rework of the function, make sure the offset's refer to the correct one. Spotted by clang: Clang warns (or errors with CONFIG_WERROR): drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized] src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp; ^~~~~~~~~ drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning s32 src_pitch, dst_pitch; ^ = 0 1 error generated. Signed-off-by:Zack Rusin <zackr@vmware.com> Reported-by:
Nathan Chancellor <nathan@kernel.org> Reported-by:
Dave Airlie <airlied@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1811 Fixes: 39985eea ("drm/vmwgfx: Abstract placement selection") Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
-
Tvrtko Ursulin authored
Thread group id (aka pid from userspace point of view) is a more interesting thing to show as an owner of a DRM fd, so track and show that instead of the thread id. In the next patch we will make the owner updated post file descriptor handover, which will also be tgid based to avoid ping-pong when multiple threads access the fd. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Fabio Estevam authored
Sometimes a GPIO is needed to turn on/off the display. Add support for this usecase by introducing the optional 'enable-gpios' property. Tested on a imx53qsb board. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Fabio Estevam authored
Add an optional 'enable-gpios' property that can be used to turn on/off the display. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Ruihai Zhou authored
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by:
-
Ruihai Zhou authored
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Liu Ying authored
Appropriate maintainers should be suggested for changes to the include/drm/drm_bridge.h header file, so add the header file to the 'DRM DRIVERS FOR BRIDGE CHIPS' section. Signed-off-by:
Liu Ying <victor.liu@nxp.com> Acked-by:
Robert Foss <robert.foss@linaro.org> Acked-by:
-
- 14 Mar, 2023 14 commits
-
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
-
Linus Walleij authored
This driver has no way to handle damage, the reason the drm_gem_fb_create_with_dirty() was used was because I had the ambition that the driver would only send out updates to DSI command displays whenever something changed, so as to minimize traffic. It turns out this ambition with command mode isn't working in practice because all the MCDE does is to create a continuous stream of DSI commands and while it is possible to send single frame updates with it, it's not been worthwhile. So we are just setting up continuous updates. Reported-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
