Pull iommu fixes from Joerg Roedel:

 - Fix for a potential NULL-ptr dereference in IOMMU core code

 - Two resource leak fixes

 - Cache flush fix in the Intel VT-d driver

* tag 'iommu-fixes-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix incomplete cache flush in intel_pasid_tear_down_entry()
  iommu/vt-d: Fix PASID reference leak
  iommu: Check if group is NULL before remove device
  iommu/dma: Fix leak in non-contiguous API

Pull ARM SoC fixes from Arnd Bergmann:
 "Not much to see here. Half the fixes this time are for Qualcomm dts
  files, fixing small mistakes on certain machines. The other fixes are:

   - A 5.13 regression fix for freescale QE interrupt controller\

   - A fix for TI OMAP gpt12 timer error handling

   - A randconfig build regression fix for ixp4xx

   - Another defconfig fix following the CONFIG_FB dependency rework"

* tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: fsl: qe: fix static checker warning
  ARM: ixp4xx: fix building both pci drivers
  ARM: configs: Update the nhk8815_defconfig
  bus: ti-sysc: Fix error handling for sysc_check_active_timer()
  soc: fsl: qe: convert QE interrupt controller to platform_device
  arm64: dts: qcom: sdm845-oneplus: fix reserved-mem
  arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem
  arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7
  arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping
  arm64: dts: qcom: msm8992-bullhead: Remove PSCI
  arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from bpf, wireless and mac80211
  trees.

  Current release - regressions:

   - tipc: call tipc_wait_for_connect only when dlen is not 0

   - mac80211: fix locking in ieee80211_restart_work()

  Current release - new code bugs:

   - bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()

   - ethernet: ice: fix perout start time rounding

   - wwan: iosm: prevent underflow in ipc_chnl_cfg_get()

  Previous releases - regressions:

   - bpf: clear zext_dst of dead insns

   - sch_cake: fix srchost/dsthost hashing mode

   - vrf: reset skb conntrack connection on VRF rcv

   - net/rds: dma_map_sg is entitled to merge entries

  Previous releases - always broken:

   - ethernet: bnxt: fix Tx path locking and races, add Rx path
     barriers"

* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
  net: dpaa2-switch: disable the control interface on error path
  Revert "flow_offload: action should not be NULL when it is referenced"
  iavf: Fix ping is lost after untrusted VF had tried to change MAC
  i40e: Fix ATR queue selection
  r8152: fix the maximum number of PLA bp for RTL8153C
  r8152: fix writing USB_BP2_EN
  mptcp: full fully established support after ADD_ADDR
  mptcp: fix memory leak on address flush
  net/rds: dma_map_sg is entitled to merge entries
  net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
  net: asix: fix uninit value bugs
  ovs: clear skb->tstamp in forwarding path
  net: mdio-mux: Handle -EPROBE_DEFER correctly
  net: mdio-mux: Don't ignore memory allocation errors
  net: mdio-mux: Delete unnecessary devm_kfree
  net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
  sch_cake: fix srchost/dsthost hashing mode
  ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
  net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
  mac80211: fix locking in ieee80211_restart_work()
  ...

Merge tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Enable SW_TABLET_MODE support for the TP200s

 - Enable WMI on two more Gigabyte motherboards

* tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: gigabyte-wmi: add support for B450M S2H V2
  platform/x86: gigabyte-wmi: add support for X570 GAMING X
  platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s
  platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option

Currently dpaa2_switch_takedown has a funny name and does not do the
opposite of dpaa2_switch_init, which makes probing fail when we need to
handle an -EPROBE_DEFER.

A sketch of what dpaa2_switch_init does:

	dpsw_open

	dpaa2_switch_detect_features

	dpsw_reset

	for (i = 0; i < ethsw->sw_attr.num_ifs; i++) {
		dpsw_if_disable

		dpsw_if_set_stp

		dpsw_vlan_remove_if_untagged

		dpsw_if_set_tci

		dpsw_vlan_remove_if
	}

	dpsw_vlan_remove

	alloc_ordered_workqueue

	dpsw_fdb_remove

	dpaa2_switch_ctrl_if_setup

When dpaa2_switch_takedown is called from the error path of
dpaa2_switch_probe(), the control interface, enabled by
dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled,
because dpaa2_switch_takedown does not call
dpaa2_switch_ctrl_if_teardown.

Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this
means that a second probe of the driver will happen with the control
interface directly enabled.

This will trigger a second error:

[   93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed
[   93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13
[   93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13

Which if we investigate the /dev/dpaa2_mc_console log, we find out is
caused by:

[E, ctrl_if_set_pools:2211, DPMNG]  ctrl_if must be disabled

So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in
reasonable limits, no reason to change STP state, re-add VLANs etc), and
rename it to something more conventional, like dpaa2_switch_teardown.

Fixes: 613c0a58 ("staging: dpaa2-switch: enable the control interface")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 9ea3e52c.

Cited commit added a check to make sure 'action' is not NULL, but
'action' is already dereferenced before the check, when calling
flow_offload_has_one_action().

Therefore, the check does not make any sense and results in a smatch
warning:

include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn:
variable dereferenced before check 'action' (see line 319)

Fix by reverting this commit.

Cc: gushengxian <gushengxian@yulong.com>
Fixes: 9ea3e52c ("flow_offload: action should not be NULL when it is referenced")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-08-18

This series contains updates to i40e and iavf drivers.

Arkadiusz fixes Flow Director not using the correct queue due to calling
the wrong pick Tx function for i40e.

Sylwester resolves traffic loss for iavf when it attempts to change its
MAC address when it does not have permissions to do so.
====================

Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make changes to MAC address dependent on the response of PF.
Disallow changes to HW MAC address and MAC filter from untrusted
VF, thanks to that ping is not lost if VF tries to change MAC.
Add a new field in iavf_mac_filter, to indicate whether there
was response from PF for given filter. Based on this field pass
or discard the filter.
If untrusted VF tried to change it's address, it's not changed.
Still filter was changed, because of that ping couldn't go through.

Fixes: c5c922b3 ("iavf: fix MAC address setting for VFs when filter is rejected")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <Gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Without this patch, ATR does not work. Receive/transmit uses queue
selection based on SW DCB hashing method.

If traffic classes are not configured for PF, then use
netdev_pick_tx function for selecting queue for packet transmission.
Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx,
which ensures that packet is transmitted/received from CPU that is
running the application.

Reproduction steps:
1. Load i40e driver
2. Map each MSI interrupt of i40e port for each CPU
3. Disable ntuple, enable ATR i.e.:
ethtool -K $interface ntuple off
ethtool --set-priv-flags $interface flow-director-atr
4. Run application that is generating traffic and is bound to a
single CPU, i.e.:
taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10
5. Observe behavior:
Application's traffic should be restricted to the CPU provided in
taskset.

Fixes: 89ec1f08 ("i40e: Fix queue-to-TC mapping on Tx")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-08-19

We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 3 files changed, 29 insertions(+), 6 deletions(-).

The main changes are:

1) Fix to clear zext_dst for dead instructions which was causing invalid program
   rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich.

2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are
   invoked from sleepable programs, from Yonghong Song.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests, bpf: Test that dead ldx_w insns are accepted
  bpf: Clear zext_dst of dead insns
  bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers
====================

Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fix for omap gpt12 timer error handling

Two of the recent fixes for ti-sysc driver had bad interaction for a
function return value that caused one of the fixes to not work so we
need to change the return value handling. Otherwise early beagleboard
variants still have a boot issue.

* tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix error handling for sysc_check_active_timer()

Link: https://lore.kernel.org/r/pull-1629354796-830948@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Hayes Wang says:

====================
r8152: fix bp settings

Fix the wrong bp settings of the firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum PLA bp number of RTL8153C is 16, not 8. That is, the
bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48.

Fixes: 195aae32 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register of USB_BP2_EN is 16 bits, so we should use
ocp_write_word(), not ocp_write_byte().

Fixes: 9370f2d0 ("support request_firmware for RTL8153")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Bug fixes

Here are two bug fixes for the net tree:

Patch 1 fixes a memory leak that could be encountered when clearing the
list of advertised MPTCP addresses.

Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure
both peers correctly understand that the full MPTCP connection handshake
has completed even when the server side quickly sends an ADD_ADDR
option.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.

It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.

But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.

Fixes: 84dfe367 ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The endpoint cleanup path is prone to a memory leak, as reported
by syzkaller:

 BUG: memory leak
 unreferenced object 0xffff88810680ea00 (size 64):
   comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s)
   hex dump (first 32 bytes):
     58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de  Xu}<....".......
     01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00  ................
   backtrace:
     [<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline]
     [<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170
     [<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731
     [<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
     [<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792
     [<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504
     [<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
     [<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
     [<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340
     [<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929
     [<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline]
     [<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724
     [<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403
     [<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457
     [<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
     [<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
     [<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80
     [<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae

We should not require an allocation to cleanup stuff.

Rework the code a bit so that the additional RCU work is no more needed.

Fixes: 1729cf18 ("mptcp: create the listening socket for new port")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function "dma_map_sg" is entitled to merge adjacent entries
and return a value smaller than what was passed as "nents".

Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len")
rather than the original "nents" parameter ("sg_len").

This old RDS bug was exposed and reliably causes kernel panics
(using RDMA operations "rds-stress -D") on x86_64 starting with:
commit c588072b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")

Simply put: Linux 5.11 and later.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/60efc69f-1f35-529d-a7ef-da0549cad143@oracle.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently we are unable to ping a bridge on top of a felix switch which
uses the ocelot-8021q tagger. The packets are dropped on the ingress of
the user port and the 'drop_local' counter increments (the counter which
denotes drops due to no valid destinations).

Dumping the PGID tables, it becomes clear that the PGID_SRC of the user
port is zero, so it has no valid destinations.

But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q
ports) is clearly missing from the forwarding mask of ports that are
under a bridge. So this has always been broken.

Looking at the version history of the patch, in v7
https://patchwork.kernel.org/project/netdevbpf/patch/20210125220333.1004365-12-olteanv@gmail.com/
the code looked like this:

	/* Standalone ports forward only to DSA tag_8021q CPU ports */
	unsigned long mask = cpu_fwd_mask;

(...)
	} else if (ocelot->bridge_fwd_mask & BIT(port)) {
		mask |= ocelot->bridge_fwd_mask & ~BIT(port);

while in v8 (the merged version)
https://patchwork.kernel.org/project/netdevbpf/patch/20210129010009.3959398-12-olteanv@gmail.com/
it looked like this:

	unsigned long mask;

(...)
	} else if (ocelot->bridge_fwd_mask & BIT(port)) {
		mask = ocelot->bridge_fwd_mask & ~BIT(port);

So the breakage was introduced between v7 and v8 of the patch.

Fixes: e21268ef ("net: dsa: felix: perform switch setup for tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull btrfs fix from David Sterba:
 "One more fix for cross-rename, adding a missing check for directory
  and subvolume, this could lead to a crash"

* tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: prevent rename2 from exchanging a subvol with a directory from different parents

Pull sound fixes from Takashi Iwai:
 "Only a few regression fixes and trivial device quirks"

* tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
  ALSA: hda: Fix hang during shutdown due to link reset
  ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
  ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire
  ALSA: hda - fix the 'Capture Switch' value change notifications

Pull clang cfi fix from Kees Cook:

 - Use rcu_read_{un}lock_sched_notrace to avoid recursion (Elliot Berman)

* tag 'cfi-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Use rcu_read_{un}lock_sched_notrace

I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.

Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.

It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all.  So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.

I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior.  That
is sufficient for at least the hackbench case.

Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk.  That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.

[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
  up to you to decide whether you actually want to backport it or not.
  It likely has no impact outside of synthetic benchmarks  - Linus ]

Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-901207693Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210818164435.99821-1-linux@weissschuh.netSigned-off-by: Hans de Goede <hdegoede@redhat.com>

This fixes improper iotlb invalidation in intel_pasid_tear_down_entry().
When a PASID was used as nested mode, released and reused, the following
error message will appear:

[  180.187556] Unexpected page request in Privilege Mode
[  180.187565] Unexpected page request in Privilege Mode
[  180.279933] Unexpected page request in Privilege Mode
[  180.279937] Unexpected page request in Privilege Mode

Per chapter 6.5.3.3 of VT-d spec 3.3, when tear down a pasid entry, the
software should use Domain selective IOTLB flush if the PGTT of the pasid
entry is SL only or Nested, while for the pasid entries whose PGTT is FL
only or PT using PASID-based IOTLB flush is enough.

Fixes: 2cd1311a ("iommu/vt-d: Add set domain DOMAIN_ATTR_NESTING attr")
Signed-off-by: Kumar Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Yi Sun <yi.y.sun@intel.com>
Link: https://lore.kernel.org/r/20210817042425.1784279-1-yi.l.liu@intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-3-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

A PASID reference is increased whenever a device is bound to an mm (and
its PASID) successfully (i.e. the device's sdev user count is increased).
But the reference is not dropped every time the device is unbound
successfully from the mm (i.e. the device's sdev user count is decreased).
The reference is dropped only once by calling intel_svm_free_pasid() when
there isn't any device bound to the mm. intel_svm_free_pasid() drops the
reference and only frees the PASID on zero reference.

Fix the issue by dropping the PASID reference and freeing the PASID when
no reference on successful unbinding the device by calling
intel_svm_free_pasid() .

Fixes: 40483774 ("iommu/vt-d: Use iommu_sva_alloc(free)_pasid() helpers")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20210813181345.1870742-1-fenghua.yu@intel.comSigned-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210817124321.1517985-2-baolu.lu@linux.intel.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

Syzbot reported uninit-value in asix_mdio_read(). The problem was in
missing error handling. asix_read_cmd() should initialize passed stack
variable smsr, but it can fail in some cases. Then while condidition
checks possibly uninit smsr variable.

Since smsr is uninitialized stack variable, driver can misbehave,
because smsr will be random in case of asix_read_cmd() failure.
Fix it by adding error handling and just continue the loop instead of
checking uninit value.

Added helper function for checking Host_En bit, since wrong loop was used
in 4 functions and there is no need in copy-pasting code parts.

Cc: Robert Foss <robert.foss@collabora.com>
Fixes: d9fe64e5 ("net: asix: Add in_pm parameter")
Reported-by: syzbot+a631ec9e717fb0423053@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs
doesn't clear skb->tstamp. We encountered a problem with linux
version 5.4.56 and ovs version 2.14.1, and packets failed to
dequeue from qdisc when fq qdisc was attached to ovs port.

Fixes: fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: kaixi.fan <fankaixi.li@bytedance.com>
Signed-off-by: xiexiaohui <xiexiaohui.xxh@bytedance.com>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saravana Kannan says:

====================
Clean up and fix error handling in mdio_mux_init()

This patch series was started due to -EPROBE_DEFER not being handled
correctly in mdio_mux_init() and causing issues [1]. While at it, I also
did some more error handling fixes and clean ups. The -EPROBE_DEFER fix is
the last patch.

Ideally, in the last patch we'd treat any error similar to -EPROBE_DEFER
but I'm not sure if it'll break any board/platforms where some child
mdiobus never successfully registers. If we treated all errors similar to
-EPROBE_DEFER, then none of the child mdiobus will work and that might be a
regression. If people are sure this is not a real case, then I can fix up
the last patch to always fail the entire mdio-mux init if any of the child
mdiobus registration fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't
ignore it and continue registering the rest of the mdiobus children. This
would permanently prevent the deferring child mdiobus from working instead
of reattempting it in the future. So, if a child mdiobus needs to be
reattempted in the future, defer the entire mdio-mux initialization.

This fixes the issue where PHYs sitting under the mdio-mux aren't
initialized correctly if the PHY's interrupt controller is not yet ready
when the mdio-mux is being probed. Additional context in the link below.

Fixes: 0ca2997d ("netdev/of/phy: Add MDIO bus multiplexer support.")
Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#tSigned-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we are seeing memory allocation errors, don't try to continue
registering child mdiobus devices. It's unlikely they'll succeed.

Fixes: 342fa196 ("mdio: mux: make child bus walking more permissive and errors more verbose")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The whole point of devm_* APIs is that you don't have to undo them if you
are returning an error that's going to get propagated out of a probe()
function. So delete unnecessary devm_kfree() call in the error return path.

Fixes: b6016166 ("mdio: mux: Correct mdio_mux_init error path issues")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems that of_find_compatible_node has a weird calling convention in
which it calls of_node_put() on the "from" node argument, instead of
leaving that up to the caller. This comes from the fact that
of_find_compatible_node with a non-NULL "from" argument it only supposed
to be used as the iterator function of for_each_compatible_node(). OF
iterator functions call of_node_get on the next OF node and of_node_put()
on the previous one.

When of_find_compatible_node calls of_node_put, it actually never
expects the refcount to drop to zero, because the call is done under the
atomic devtree_lock context, and when the refcount drops to zero it
triggers a kobject and a sysfs file deletion, which assume blocking
context.

So any driver call to of_find_compatible_node is probably buggy because
an unexpected of_node_put() takes place.

What should be done is to use the of_get_compatible_child() function.

Fixes: 5a8f0974 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Link: https://lore.kernel.org/netdev/20210814010139.kzryimmp4rizlznt@skbuf/Suggested-by: Frank Rowand <frowand.list@gmail.com>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When adding support for using the skb->hash value as the flow hash in CAKE,
I accidentally introduced a logic error that broke the host-only isolation
modes of CAKE (srchost and dsthost keywords). Specifically, the flow_hash
variable should stay initialised to 0 in cake_hash() in pure host-based
hashing mode. Add a check for this before using the skb->hash value as
flow_hash.

Fixes: b0c19ed6 ("sch_cake: Take advantage of skb->hash where appropriate")
Reported-by: Pete Heist <pete@heistp.net>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-900263115Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210817154628.84992-1-linux@weissschuh.netSigned-off-by: Hans de Goede <hdegoede@redhat.com>

In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails,
We should restore the previous state and clean up the
resources. Add the missing clear af_xdp_zc_qps and unmap dma
to fix this bug.

Fixes: d49e286d ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair")
Fixes: 4a9b32f3 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210817203736.3529939-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-2021-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.14

First set of fixes for v5.14 and nothing major this time. New devices
for iwlwifi and one fix for a compiler warning.

iwlwifi
 * support for new devices

mt76
 * fix compiler warning about MT_CIPHER_NONE

* tag 'wireless-drivers-2021-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
  mt76: fix enum type mismatch
  iwlwifi: add new so-jf devices
  iwlwifi: add new SoF with JF devices
  iwlwifi: pnvm: accept multiple HW-type TLVs
====================

Link: https://lore.kernel.org/r/20210817171027.EC1E6C43460@smtp.codeaurora.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull tracing fix from Steven Rostedt:
 "Limit the shooting in the foot of tp_printk

  The "tp_printk" option redirects the trace event output to printk at
  boot up. This is useful when a machine crashes before boot where the
  trace events can not be retrieved by the in kernel ring buffer. But it
  can be "dangerous" because trace events can be located in high
  frequency locations such as interrupts and the scheduler, where a
  printk can slow it down that it live locks the machine (because by the
  time the printk finishes, the next event is triggered). Thus tp_printk
  must be used with care.

  It was discovered that the filter logic to trace events does not apply
  to the tp_printk events. This can cause a surprise and live lock when
  the user expects it to be filtered to limit the amount of events
  printed to the console when in fact it still prints everything"

* tag 'trace-v5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Apply trace filters on all output channels

qlcnic_83xx_unlock_flash() is called on all paths after we call
qlcnic_83xx_lock_flash(), except for one error path on failure
of QLCRD32(), which may cause a deadlock. This bug is suggested
by a static analysis tool, please advise.

Fixes: 81d0aeb0 ("qlcnic: flash template based firmware reset recovery")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ilan's change to move locking around accidentally lost the
wiphy_lock() during some porting, add it back.

Fixes: 45daaa13 ("mac80211: Properly WARN on HW scan before restart")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210817121210.47bdb177064f.Ib1ef79440cd27f318c028ddfc0c642406917f512@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>