The mcu command format are different for mt7915 and mt7986.
Fix the mt7915_mcu_wed_wa_tx_stats to support mt7915 and mt7986.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

When queueing packets, only the MT76_RESET flag of the primary PHY
is checked. If the primary PHY is scanning or changing channels, this can
lead to packet loss for tx on the second PHY.
Fix this by passing the phy to the .tx_queue_skb op and using it to check
the correct flag.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid potentially reusing uninitialized data
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Improves initial rate selection after connecting
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Commit 3e2f544d ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.

Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240426093156.2002258-2-leitao@debian.org

With commit 34d21de9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.

With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.

Move qtnfmac driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240426093156.2002258-1-leitao@debian.org

struct brcmf_usb_image was added in the initial commit 71bb244b
("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") and updated
in commit 803599d4 ("brcmfmac: store usb fw images in local linked
list.")

Its only usage was removed in commit 52f98a57 ("brcmfmac: remove
firmware list from USB driver").

Remove the structure definition now. This saves a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/23afd8c1733ad087ce2399a07a30d689aef861d5.1714039373.git.christophe.jaillet@wanadoo.fr

struct cb_del_ampdu_pars was added in the initial commit 5b435de0
("net: wireless: add brcm80211 drivers") and its only usage was removed in
commit e041f65d ("brcmsmac: Remove internal tx queue").

Remove the structure definition now. This saves a few lines of code.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/fa3b190b6e9cba65ecc36fc93121c6ed8704f704.1714036681.git.christophe.jaillet@wanadoo.fr

Tony Nguyen says:

====================
net: intel: start The Great Code Dedup + Page Pool for iavf

Alexander Lobakin says:

Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:

Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  MAINTAINERS: add entry for libeth and libie
  iavf: switch to Page Pool
  iavf: pack iavf_ring more efficiently
  libeth: add Rx buffer management
  page_pool: add DMA-sync-for-CPU inline helper
  page_pool: constify some read-only function arguments
  slab: introduce kvmalloc_array_node() and kvcalloc_node()
  iavf: drop page splitting and recycling
  iavf: kill "legacy-rx" for good
  net: intel: introduce {, Intel} Ethernet common library
====================

Link: https://lore.kernel.org/r/20240424203559.3420468-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Asbjørn Sloth Tønnesen says:

====================
net: lan966x: flower: validate control flags

This series adds flower control flags validation to the
lan966x driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags.

v1: https://lore.kernel.org/netdev/20240423102720.228728-1-ast@fiberby.net/
====================

Link: https://lore.kernel.org/r/20240424125347.461995-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.

In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-4-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rename goto label, as the error message is specific to the fragment flags.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-3-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define extack locally, to reduce line lengths and aid future users.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424125347.461995-2-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Asbjørn Sloth Tønnesen says:

====================
net: sparx5: flower: validate control flags

This series adds flower control flags validation to the
sparx5 driver, and changes it from assuming that it handles
all control flags, to instead reject rules if they have
masked any unknown/unsupported control flags.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>

v1: https://lore.kernel.org/netdev/20240423102728.228765-1-ast@fiberby.net/
====================

Link: https://lore.kernel.org/r/20240424121632.459022-1-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use flow_rule_is_supp_control_flags() to reject filters with
unsupported control flags.

In case any unsupported control flags are masked,
flow_rule_is_supp_control_flags() sets a NL extended
error message, and we return -EOPNOTSUPP.

Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-5-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove goto, as it's only used once, and the error message is
specific to that context.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-4-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define extack locally, to reduce line lengths and aid future users.

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-3-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The fragment lookup should only be performed, when
at least one of the fragment flags are set.

This change was deliberately not included in commit
68aba004 ("net: sparx5: flower: fix fragment flags handling")
as it's only needed for future proffing the code, since
"mask" is currently only set in conjunction with the
fragment flags.
(The 3rd flag FLOW_DIS_ENCAPSULATION is only used with "key")

Only compile tested.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424121632.459022-2-ast@fiberby.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].

Un-embed the net_device from the private struct by converting it
into a pointer. Then use the leverage the new alloc_netdev_dummy()
helper to allocate and initialize dummy devices.

[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240424161108.3397057-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Horman says:

====================
net: microchip: Correct spelling in comments

Correct spelling in comments in Microchip drivers.
Flagged by codespell.

v1: https://lore.kernel.org/r/20240419-lan743x-confirm-v1-0-2a087617a3e5@kernel.org
====================

Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-0-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-4-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-3-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-2-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling in comments, as flagged by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240424-lan743x-confirm-v2-1-f0480542e39f@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Someone complains the message appears continuously. This occurs
because the device is woken from UPS mode, and the driver re-loads
the firmware.

When the device enters runtime suspend and cable is unplugged, the
device would enter UPS mode. If the runtime resume occurs, and the
device is woken from UPS mode, the driver has to re-load the firmware
and causes the message. If someone wakes the device continuously, the
message would be shown continuously, too. Use dev_dbg to avoid it.

Note that, the function could be called before register_netdev(), so I
don't use netif_info() or netif_dbg().
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20240424084532.159649-1-hayeswang@realtek.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

To avoid the failure of usbnet_get_endpoints(), we should check the
return value of the usbnet_get_endpoints().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240424065634.1870027-1-make_ruc2021@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add quirk for ATS SFP-GE-T 1000Base-TX module.

This copper module comes with broken TX_FAULT indicator which must be
ignored for it to work.
Co-authored-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rebased on top of net-next ]
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240423090025.29231-1-kabel@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Enhance the quirk for Fibrestore 2.5G copper SFP module. The original
commit e27aca37 ("net: sfp: add quirk for FS's 2.5G copper SFP")
introducing the quirk says that the PHY is inaccessible, but that is
not true.

The module uses Rollball protocol to talk to the PHY, and needs a 4
second wait before probing it, same as FS 10G module.

The PHY inside the module is Realtek RTL8221B-VB-CG PHY. The realtek
driver recently gained support to set it up via clause 45 accesses.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240423085039.26957-2-kabel@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Update the comment for the Fibrestore SFP-10G-T module: since commit
e9301af3 ("net: sfp: fix PHY discovery for FS SFP-10G-T module")
we also do a 4 second wait before probing the PHY.

Fixes: e9301af3 ("net: sfp: fix PHY discovery for FS SFP-10G-T module")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240423085039.26957-1-kabel@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

I had failures with pmtu.sh selftests lately,
with netns dismantles firing ref_tracking alerts [1].

After much debugging, I found that some queued
rcu callbacks were delayed by minutes, because
of CONFIG_RCU_LAZY=y option.

Joel Fernandes had a similar issue in the past,
fixed with commit 483c26ff ("net: Use call_rcu_hurry()
for dst_release()")

In this commit, I make sure nexthop_free_rcu()
and free_fib_info_rcu() are not delayed too much
because they both can release device references.

tools/testing/selftests/net/pmtu.sh no longer fails.

Traces were:

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 3/5 users at
                    dst_alloc+0x76/0x160
                    ip6_dst_alloc+0x25/0x80
                    ip6_pol_route+0x2a8/0x450
                    ip6_pol_route_output+0x1f/0x30
                    fib6_rule_lookup+0x163/0x270
                    ip6_route_output_flags+0xda/0x190
                    ip6_dst_lookup_tail.constprop.0+0x1d0/0x260
                    ip6_dst_lookup_flow+0x47/0xa0
                    udp_tunnel6_dst_lookup+0x158/0x210
                    vxlan_xmit_one+0x4c2/0x1550 [vxlan]
                    vxlan_xmit+0x52d/0x14f0 [vxlan]
                    dev_hard_start_xmit+0x7b/0x1e0
                    __dev_queue_xmit+0x20b/0xe40
                    ip6_finish_output2+0x2ea/0x6e0
                    ip6_finish_output+0x143/0x320
                    ip6_output+0x74/0x140

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 1/5 users at
                    netdev_get_by_index+0xc0/0xe0
                    fib6_nh_init+0x1a9/0xa90
                    rtm_new_nexthop+0x6fa/0x1580
                    rtnetlink_rcv_msg+0x155/0x3e0
                    netlink_rcv_skb+0x61/0x110
                    rtnetlink_rcv+0x19/0x20
                    netlink_unicast+0x23f/0x380
                    netlink_sendmsg+0x1fc/0x430
                    ____sys_sendmsg+0x2ef/0x320
                    ___sys_sendmsg+0x86/0xd0
                    __sys_sendmsg+0x67/0xc0
                    __x64_sys_sendmsg+0x21/0x30
                    x64_sys_call+0x252/0x2030
                    do_syscall_64+0x6c/0x190
                    entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 1/5 users at
                    ipv6_add_dev+0x136/0x530
                    addrconf_notify+0x19d/0x770
                    notifier_call_chain+0x65/0xd0
                    raw_notifier_call_chain+0x1a/0x20
                    call_netdevice_notifiers_info+0x54/0x90
                    register_netdevice+0x61e/0x790
                    veth_newlink+0x230/0x440
                    __rtnl_newlink+0x7d2/0xaa0
                    rtnl_newlink+0x4c/0x70
                    rtnetlink_rcv_msg+0x155/0x3e0
                    netlink_rcv_skb+0x61/0x110
                    rtnetlink_rcv+0x19/0x20
                    netlink_unicast+0x23f/0x380
                    netlink_sendmsg+0x1fc/0x430
                    ____sys_sendmsg+0x2ef/0x320
                    ___sys_sendmsg+0x86/0xd0
....
[ 1079.316024]  ? show_regs+0x68/0x80
[ 1079.316087]  ? __warn+0x8c/0x140
[ 1079.316103]  ? ref_tracker_free+0x1a0/0x270
[ 1079.316117]  ? report_bug+0x196/0x1c0
[ 1079.316135]  ? handle_bug+0x42/0x80
[ 1079.316149]  ? exc_invalid_op+0x1c/0x70
[ 1079.316162]  ? asm_exc_invalid_op+0x1f/0x30
[ 1079.316193]  ? ref_tracker_free+0x1a0/0x270
[ 1079.316208]  ? _raw_spin_unlock+0x1a/0x40
[ 1079.316222]  ? free_unref_page+0x126/0x1a0
[ 1079.316239]  ? destroy_large_folio+0x69/0x90
[ 1079.316251]  ? __folio_put+0x99/0xd0
[ 1079.316276]  dst_dev_put+0x69/0xd0
[ 1079.316308]  fib6_nh_release_dsts.part.0+0x3d/0x80
[ 1079.316327]  fib6_nh_release+0x45/0x70
[ 1079.316340]  nexthop_free_rcu+0x131/0x170
[ 1079.316356]  rcu_do_batch+0x1ee/0x820
[ 1079.316370]  ? rcu_do_batch+0x179/0x820
[ 1079.316388]  rcu_core+0x1aa/0x4d0
[ 1079.316405]  rcu_core_si+0x12/0x20
[ 1079.316417]  __do_softirq+0x13a/0x3dc
[ 1079.316435]  __irq_exit_rcu+0xa3/0x110
[ 1079.316449]  irq_exit_rcu+0x12/0x30
[ 1079.316462]  sysvec_apic_timer_interrupt+0x5b/0xe0
[ 1079.316474]  asm_sysvec_apic_timer_interrupt+0x1f/0x30
[ 1079.316569] RIP: 0033:0x7f06b65c63f0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240423205408.39632-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge networking fixes after downstream PR.

Conflicts:

drivers/net/ethernet/ti/icssg/icssg_prueth.c

net/mac80211/chan.c
  89884459 ("wifi: mac80211: fix idle calculation with multi-link")
  87f55002 ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/

net/unix/garbage.c
  1971d13f ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
  4090fa37 ("af_unix: Replace garbage collection algorithm.")

drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
  4dcd0e83 ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
  e2dc7bfd ("net: ti: icssg-prueth: Move common functions into a separate file")

No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

While testing TCP performance with latest trees,
I saw suspect SOCKET_BACKLOG drops.

tcp_add_backlog() computes its limit with :

    limit = (u32)READ_ONCE(sk->sk_rcvbuf) +
            (u32)(READ_ONCE(sk->sk_sndbuf) >> 1);
    limit += 64 * 1024;

This does not take into account that sk->sk_backlog.len
is reset only at the very end of __release_sock().

Both sk->sk_backlog.len and sk->sk_rmem_alloc could reach
sk_rcvbuf in normal conditions.

We should double sk->sk_rcvbuf contribution in the formula
to absorb bubbles in the backlog, which happen more often
for very fast flows.

This change maintains decent protection against abuses.

Fixes: c377411f ("net: sk_add_backlog() take rmem_alloc into account")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240423125620.3309458-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.10

The second "new features" pull request for v6.10 with changes both in
stack and in drivers. This time the pull request is rather small and
nothing special standing out except maybe that we have several
kernel-doc fixes. Great to see that we are getting warning free
wireless code (until new warnings are added).

Major changes:

rtl8xxxu:
 * enable Management Frame Protection (MFP) support

rtw88:
 * disable unsupported interface type of mesh point for all chips, and only
   support station mode for SDIO chips.

* tag 'wireless-next-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (63 commits)
  wifi: mac80211: handle link ID during management Tx
  wifi: mac80211: handle sdata->u.ap.active flag with MLO
  wifi: cfg80211: add return docs for regulatory functions
  wifi: cfg80211: make some regulatory functions void
  wifi: mac80211: add return docs for sta_info_flush()
  wifi: mac80211: keep mac80211 consistent on link activation failure
  wifi: mac80211: simplify ieee80211_assign_link_chanctx()
  wifi: mac80211: reserve chanctx during find
  wifi: cfg80211: fix cfg80211 function kernel-doc
  wifi: mac80211_hwsim: Use wider regulatory for custom for 6GHz tests
  wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is low
  wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlan
  wifi: iwlwifi: mvm: get periodic statistics in EMLSR
  wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_links
  wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.
  wifi: iwlwifi: mvm: exit EMLSR upon missed beacon
  wifi: iwlwifi: mvm: init vif works only once
  wifi: iwlwifi: mvm: Add helper functions to update EMLSR status
  wifi: iwlwifi: mvm: Implement new link selection algorithm
  wifi: iwlwifi: mvm: move EMLSR/links code
  ...
====================

Link: https://lore.kernel.org/r/20240424100122.217AEC113CE@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Florian Fainelli says:

====================
net: dsa: b53: Remove adjust_link

b53 is now the only remaining driver that uses both PHYLIB's adjust_link
and PHYLINK's mac_ops callbacks, convert entirely to PHYLINK.
====================

Link: https://lore.kernel.org/r/20240423183339.1368511-1-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Convert b53 to provide its own phylink MAC operations, thus avoiding the
shim layer in DSA's port.c
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-9-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Only use the PHYLINK implementation from there on now that an equivalent
configuration is applied to all of the switch ports.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-8-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

And make sure this is done for the MLO_AN_PHY case, where it actually
makes sense, contrary to b53_adjust_link() which only did it for
fixed-PHY configurations where it does not make sense.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-7-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Call b53_adjust_531x5_rgmii() and b53_adjust_5325_mii() from
b53_phylink_mac_config() when we have a fixed PHY in preparation for removing
b53_adjust_link(). Also move b53_adjust_63xx_rgmii() to
b53_phylink_mac_config() where it logically belongs.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-6-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Just like what b53_adjust_link() does, force flow control for the
BCM5301X CPU port(s) by forcing rx_pause and tx_pause in
b53_phylink_mac_link_up(). Preparatory step for getting rid of
b53_adjust_link().
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-5-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Takes care of doing the 5325 switch series specific MII programming and
is called from b53_adjust_link() to allow the future removal of
b53_adjust_link().
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240423183339.1368511-4-florian.fainelli@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>