- 09 Dec, 2010 1 commit
-
-
Sedat Dilek authored
The AHB bus support patchset moved the table "Known PCI ids" from base.c to pci.c - unfortunately, MODULE_DEVICE_TABLE() was not transferred. With this fix 'modinfo ath5k' lists the alias -> pci-id lines, again. The issue was introduced by: commit e5b046d8 "ath5k: Move PCI bus functions to separate file." Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 08 Dec, 2010 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville authored
Conflicts: drivers/net/wireless/ath/ath9k/ath9k.h drivers/net/wireless/ath/ath9k/main.c drivers/net/wireless/ath/ath9k/xmit.c
-
Luis R. Rodriguez authored
Suspend requires the device to be in fullsleep otherwise upon resume the device becomes unresponsive. We need to ensure that when we want the device to go to sleep it yields to the request, otherwise we'll have a useless devices upon resume. Warn when changing the power fails as we need to look into these issues. Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
We should not be idle when we get the ATH9K_INT_TIM_TIMER, otherwise its a sign of something broken in our design with our idle state machine and mac80211. Skip these and WARN once just in case this is triggerable. Cc: Paul Stewart <pstew@google.com> Cc: Amod Bodas <amod.bodas@atheros.com> signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
1)WLAN_EID_BSS_COEX_2040 2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM 3)WLAN_EID_EXT_CAPABILITY Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
This let us avoid double addressing while still having reg check. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Order was changed in specs. For writing arrays we have designed bulk function which makes use of auto increment and do not write table address over and over. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
It can be NULL according to docs, and logging showed it to be NULL in practice. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Add a new BSS attribute to allow hostapd to set the current HT opmode. Otherwise drivers won't be able to set up protection for HT rates in AP mode. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
Enable the port when disabling countermeasures, and disable it on enabling countermeasures. This bug causes the response of the system to certain attacks to be ineffective. It also prevents wpa_supplicant from getting scan results, as wpa_supplicant disables countermeasures on startup - preventing the hardware from scanning. wpa_supplicant works with ap_mode=2 despite this bug because the commit handler re-enables the port. The log tends to look like: State: DISCONNECTED -> SCANNING Starting AP scan for wildcard SSID Scan requested (ret=0) - scan timeout 5 seconds EAPOL: disable timer tick EAPOL: Supplicant port status: Unauthorized Scan timeout - try to get results Failed to get scan results Failed to get scan results - try scanning again Setting scan request: 1 sec 0 usec Starting AP scan for wildcard SSID Scan requested (ret=-1) - scan timeout 5 seconds Failed to initiate AP scan. Reported by: Giacomo Comes <comes@naic.edu> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
... and interface up. In these situations, you are usually trying to connect to a new AP, so keeping TKIP countermeasures active is confusing. This is already how the driver behaves (inadvertently). However, querying SIOCGIWAUTH may tell userspace that countermeasures are active when they aren't. Clear the setting so that the reporting matches what the driver has done.. Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
mac80211 doesn't handle shared skbs correctly at the moment. As a result a possible resize can trigger a BUG in pskb_expand_head. [ 676.030000] Kernel bug detected[#1]: [ 676.030000] Cpu 0 [ 676.030000] $ 0 : 00000000 00000000 819662ff 00000002 [ 676.030000] $ 4 : 81966200 00000020 00000000 00000020 [ 676.030000] $ 8 : 819662e0 800043c0 00000002 00020000 [ 676.030000] $12 : 3b9aca00 00000000 00000000 00470000 [ 676.030000] $16 : 80ea2000 00000000 00000000 00000000 [ 676.030000] $20 : 818aa200 80ea2018 80ea2000 00000008 [ 676.030000] $24 : 00000002 800ace5c [ 676.030000] $28 : 8199a000 8199bd20 81938f88 80f180d4 [ 676.030000] Hi : 0000026e [ 676.030000] Lo : 0000757e [ 676.030000] epc : 801245e4 pskb_expand_head+0x44/0x1d8 [ 676.030000] Not tainted [ 676.030000] ra : 80f180d4 ieee80211_skb_resize+0xb0/0x114 [mac80211] [ 676.030000] Status: 1000a403 KERNEL EXL IE [ 676.030000] Cause : 10800024 [ 676.030000] PrId : 0001964c (MIPS 24Kc) [ 676.030000] Modules linked in: mac80211_hwsim rt2800lib rt2x00soc rt2x00pci rt2x00lib mac80211 crc_itu_t crc_ccitt cfg80211 compat arc4 aes_generic deflate ecb cbc [last unloaded: rt2800pci] [ 676.030000] Process kpktgend_0 (pid: 97, threadinfo=8199a000, task=81879f48, tls=00000000) [ 676.030000] Stack : ffffffff 00000000 00000000 00000014 00000004 80ea2000 00000000 00000000 [ 676.030000] 818aa200 80f180d4 ffffffff 0000000a 81879f78 81879f48 81879f48 00000018 [ 676.030000] 81966246 80ea2000 818432e0 80f1a420 80203050 81814d98 00000001 81879f48 [ 676.030000] 81879f48 00000018 81966246 818432e0 0000001a 8199bdd4 0000001c 80f1b72c [ 676.030000] 80203020 8001292c 80ef4aa2 7f10b55d 801ab5b8 81879f48 00000188 80005c90 [ 676.030000] ... [ 676.030000] Call Trace: [ 676.030000] [<801245e4>] pskb_expand_head+0x44/0x1d8 [ 676.030000] [<80f180d4>] ieee80211_skb_resize+0xb0/0x114 [mac80211] [ 676.030000] [<80f1a420>] ieee80211_xmit+0x150/0x22c [mac80211] [ 676.030000] [<80f1b72c>] ieee80211_subif_start_xmit+0x6f4/0x73c [mac80211] [ 676.030000] [<8014361c>] pktgen_thread_worker+0xfac/0x16f8 [ 676.030000] [<8002ebe8>] kthread+0x7c/0x88 [ 676.030000] [<80008e0c>] kernel_thread_helper+0x10/0x18 [ 676.030000] [ 676.030000] [ 676.030000] Code: 24020001 10620005 2502001f <0200000d> 0804917a 00000000 2502001f 00441023 00531021 Fix this by making a local copy of shared skbs prior to mangeling them. To avoid copying the skb unnecessarily move the skb_copy call below the checks that don't need write access to the skb. Also, move the assignment of nh_pos and h_pos below the skb_copy to point to the correct skb. It would be possible to avoid another resize of the copied skb by using skb_copy_expand instead of skb_copy but that would make the patch more complex. Also, shared skbs are a corner case right now, so the resize shouldn't matter much. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
The HW has to be set to FULLSLEEP mode during suspend, when no interface has been brought up. Not doing this would break resume, as the chip won't be powered up at all. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
This results in an erroneus num_adhoc_vifs count, as the this counter was incremented but not decremented for mesh interfaces. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Javier Cardona authored
This patch fixes the oops below when attempting to bring up a mesh interface on ath5k hardware. [ 128.933099] kernel BUG at drivers/net/wireless/ath/ath5k/base.c:197! [ 128.933099] invalid opcode: 0000 [#1] (...) [ 128.933099] Call Trace: [ 128.933099] [<c83b77fa>] ? ath5k_beacon_update+0x57/0x1f8 [ath5k] [ 128.933099] [<c02d9a40>] ? __sysfs_add_one+0x28/0x76 [ 128.933099] [<c83b830e>] ? ath5k_bss_info_changed+0x13f/0x173 [ath5k] [ 128.933099] [<c82ff629>] ? ieee80211_config_beacon+0xc0/0x17e [mac80211] [ 128.933099] [<c82f073e>] ? ieee80211_bss_info_change_notify+0x182/0x18b [mac80211] [ 128.933099] [<c83b81cf>] ? ath5k_bss_info_changed+0x0/0x173 [ath5k] [ 128.933099] [<c82ff6d6>] ? ieee80211_config_beacon+0x16d/0x17e [mac80211] [ 128.933099] [<c82ff753>] ? ieee80211_add_beacon+0x34/0x39 [mac80211] [ 128.933099] [<c830a4ed>] ? ieee80211s_init+0xf8/0x10f [mac80211] [ 128.933099] [<c830a5df>] ? ieee80211_mesh_init_sdata+0xdb/0x154 [mac80211] Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Kilroy authored
The interrupt handler takes a lock - but since commit bcad6e80 this lock goes through an indirection specified in the hermes_t structure. We must therefore initialise the structure before setting up the interrupt handler. Fix orinoco_cs and spectrum_cs <https://bugzilla.kernel.org/show_bug.cgi?id=23932> Bisected by: Matt Domsch <Matt_Domsch@dell.com> Signed-off by: David Kilroy <kilroyd@googlemail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 07 Dec, 2010 15 commits
-
-
Javier Cardona authored
Wrap mesh sections inside CONFIG_MAC80211_MESH to fix compilation problems reported by Stephen Rothwell, Larry Finger and Bruno Randolf. Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
The structure struct ieee80211_rx_status *rxs is no longer needed to be passed to ath_rx_send_to_mac80211 function Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
With the current save power save implementation we assume a dtim period of 1.This value is assigned based on a sanity check in the driver eventhough we had not parsed it from mac80211.This patch obtains the actual DTIM period from AP by parsing it from mac80211.Yet for handling multicast traffic we may still have it as fixed rather than parsing it from mac80211 .This does not breaks power save or anything as the sleep duration is currently fixed in the driver.This patch may serve to improve power save in the future by using dtim period for sleep duration and using correct dtim period adhoc mode. Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
AUTOSLEEP feature is enabled only for AR9271 and AR9003 version chipsets.So unlikely macro should be used only to check whether auto-sleep feature is enabled Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Use the correct error condition exit in case firmware download fails for some reason. Not doing so results in a panic: usb 1-3: ath9k_htc: Transferred FW: ar9271.fw, size: 51280 usb 1-3: ath9k_htc: Firmware - ar9271.fw download failed usb 1-3: ath9k_htc: Target is unresponsive Failed to initialize the device INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2823, comm: insmod Tainted: G W 2.6.37-rc4-wl #11 Call Trace: [<ffffffff81090d7e>] __lock_acquire+0xe3e/0x1d00 [<ffffffff813a9f14>] ? restore_args+0x0/0x30 [<ffffffff81058af1>] ? vprintk+0x321/0x500 [<ffffffff81092290>] lock_acquire+0xa0/0x190 [<ffffffffa02a0eac>] ? usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffff813a8ea8>] _raw_spin_lock_irq+0x48/0x60 [<ffffffffa02a0eac>] ? usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffff813a53fd>] ? printk+0x3c/0x3f [<ffffffffa02a0eac>] usb_kill_anchored_urbs+0x1c/0x80 [usbcore] [<ffffffffa0055388>] ath9k_hif_usb_dealloc_urbs+0x18/0x40 [ath9k_htc] [<ffffffffa00557d7>] ath9k_hif_usb_probe+0x227/0x3d0 [ath9k_htc] [<ffffffffa02a56ac>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812ae826>] driver_probe_device+0x96/0x1c0 [<ffffffff812ae9f3>] __driver_attach+0xa3/0xb0 [<ffffffff812ae950>] ? __driver_attach+0x0/0xb0 [<ffffffff812ad6ae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae4c9>] driver_attach+0x19/0x20 [<ffffffff812ae038>] bus_add_driver+0x168/0x320 [<ffffffff812aec71>] driver_register+0x71/0x140 [<ffffffff811fc338>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa02a438c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa0063000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa005599e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa006302b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef9b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
ath.ko is a common module shared between ath5k, ar9170usb, ath9k and ath9k_htc. Adding driver specific data to the shared structure would impact all the drivers. Handling USB device recognition for devices specific to ath9k_htc can be handled within the driver itself. Also, AR7010 refers to the processor used in both AR9280/AR9287 based devices. Rename the device enumerations accordingly. While at it, check properly for the bus type when choosing the EEPROM base address for UB95. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
net/mac80211/mlme.c: In function 'ieee80211_sta_work': net/mac80211/mlme.c:1981: warning: too many arguments for format Introduced by commit 04ac3c0e ("mac80211: speed up AP probing using nullfunc frames"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bruno Randolf authored
One thing I missed in my WME series: Older hardware does not have enough hardware queues to support WME. In this case we just set up one data queue. Use the capability information to decide how many queues to set up. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ben Greear authored
This decreases spammage in the log. A single line message will still be printed, so users can be aware that problem exists. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Vasanthakumar Thiagarajan authored
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-