- 29 Jun, 2020 1 commit
-
-
Ulrich Hecht authored
Make use of the IRLM setup feature in the renesas-intc-irqpin driver. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by:
Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/1441726946-30131-3-git-send-email-ulrich.hecht+renesas@gmail.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
- 26 Jun, 2020 13 commits
-
-
Lad Prabhakar authored
The HiHope RZ/G2N variants are advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts's, enabling the lvds node to get the panel to work with all the HiHope RZ/G2N variants. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Lad Prabhakar authored
The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main board. Signed-off-by:
-
Lad Prabhakar authored
Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on r8a774b1 SoC. Signed-off-by:
-
Lad Prabhakar authored
Add support for idk-1110wr display as similarly done for Rev.2.0 Signed-off-by:
-
Lad Prabhakar authored
Separate out LVDS specific nodes into common file hihope-rzg2-ex-lvds.dtsi so that this can be re-used by RZ/G2M[N] variants. Signed-off-by:
-
Lad Prabhakar authored
The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0 main board. Signed-off-by:
-
Lad Prabhakar authored
Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on r8a774a1 SoC. Signed-off-by:
-
Lad Prabhakar authored
Rev.3.0 and Rev.4.0 are identical and can be identified by using GP5_19 and GP5_21. Rev GP5_19 GP5_21 ============================== Rev.3.0 0 0 Rev.4.0 0 1 This patch creates hihope-rev4.dtsi file with Rev.3.0/4.0 specific changes for HopeRun HiHope RZ/G2M[N] boards. Signed-off-by:
-
Lad Prabhakar authored
Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi file so that hihope-common.dtsi can be used by all the variants for RZ/G2M[N] boards. LED node names have been updated according to Rev.4.0 schematics. Signed-off-by:
-
Lad Prabhakar authored
The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. Signed-off-by:
-
Lad Prabhakar authored
The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. While at it also added a comment about switch SW43 to be OFF for pciec1 to be activated. Signed-off-by:
-
Yoshihiro Shimoda authored
Add IPMMU nodes for r8a77961 (R-Car M3-W+). Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1591874021-10209-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Lad Prabhakar authored
Add the DT nodes needed by MSIOF[0123] interfaces to the SoC dtsi. Signed-off-by:
-
- 15 Jun, 2020 22 commits
-
-
Lad Prabhakar authored
Add support for the camera daughter board which is connected to iWave's RZ/G1H Qseven carrier board. Also enable ttySC[0135] and ethernet1 interfaces. Signed-off-by:
-
Lad Prabhakar authored
Add CMT[01] support to r8a7742 SoC DT. Signed-off-by:
-
Lad Prabhakar authored
This patch instantiates the thermal sensor module with thermal-zone support. Signed-off-by:
-
Lad Prabhakar authored
Enable sound with DMA support on carrier board. DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: -
Lad Prabhakar authored
This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by:
-
Lad Prabhakar authored
Add sound support for the RZ/G1H SoC (a.k.a. R8A7742). This work is based on similar work done on the R8A7744 SoC. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/1590526904-13855-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Lad Prabhakar authored
Enable RWDT and use 60 seconds as default timeout. Signed-off-by:
-
Lad Prabhakar authored
Enable Ethernet AVB on iWave RZ/G1H carrier board. Signed-off-by:
-
Lad Prabhakar authored
Enable the SDHI2 controller on iWave RZ/G1H carrier board. Signed-off-by:
-
Lad Prabhakar authored
Enable SCIFB2 interface on iWave RZ/G1H carrier board. Signed-off-by:
-
Lad Prabhakar authored
Add XHCI support to R8A7742 SoC DT. Signed-off-by:
-
Lad Prabhakar authored
Add USB DMAC and HSUSB device nodes on RZ/G1H SoC dtsi. Signed-off-by:
-
Lad Prabhakar authored
Describe internal PCI bridge devices, USB phy device and link PCI USB devices to USB phy. Signed-off-by:
-
Lad Prabhakar authored
Add a device node for the Watchdog Timer (RWDT) controller on the Renesas RZ/G1H (r8a7742) SoC. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1590172641-1556-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Geert Uytterhoeven authored
According to commit 61efb56e ("dt-bindings: arm: gic: Allow combining arm,gic-400 compatible strings"), "arm,gic-400" should be listed first. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20200519095431.5650-1-geert+renesas@glider.be
-
Lad Prabhakar authored
Add DT nodes for the Advanced Power Management Units (APMU), and use the enable-method to point out that the APMU should be used for SMP support. Signed-off-by:
-
Lad Prabhakar authored
Define the generic R8A7742 part of the Ether device node. Signed-off-by:
-
Lad Prabhakar authored
Add Ethernet AVB support for R8A7742 SoC. Signed-off-by:
-
Lad Prabhakar authored
Add the SATA device nodes to the R8A7742 device tree. Signed-off-by:
-
Lad Prabhakar authored
Describe MMC0 device node in the R8A7742 device tree. Signed-off-by:
-
Lad Prabhakar authored
Add the SDHI device nodes to the R8A7742 device tree. Signed-off-by:
-
Lad Prabhakar authored
Add the I2C[0-3] and IIC[0-3] device nodes to the R8A7742 device tree. Automatic transmission for PMIC control is not available on IIC3 hence compatible strings "renesas,rcar-gen2-iic" and "renesas,rmobile-iic" are not added to iic3 node. Signed-off-by:
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
