- 18 Aug, 2017 6 commits
-
-
Fabio Estevam authored
When enable_gpio is provided via an I2C or SPI expander, it may not be available when panel-simple probes leading to the following error: panel-simple panel: failed to request GPIO: -517 As this error message is not very useful to the end user, skip printing it in the case of deferred probe. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1498857286-10820-1-git-send-email-festevam@gmail.com
-
Hoegeun Kwon authored
This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver which uses MIPI DSI bus to communicate with panel. The panel has 320×320 resolution in 1.63" physical panel. This panel is used in Samsung Galaxy Gear 2. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-3-git-send-email-hoegeun.kwon@samsung.com
-
Hoegeun Kwon authored
The Samsung S6E63J0X03 is a 1.63" 320x320 AMOLED panel connected using MIPI-DSI interfaces. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-2-git-send-email-hoegeun.kwon@samsung.com
-
Sean Paul authored
Archit requested this backmerge to facilitate merging some patches depending on changes between -rc2 & -rc5 Signed-off-by: Sean Paul <seanpaul@chromium.org>
-
Arvind Yadav authored
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/22fa8ca67a6d4a59997f463bf241ed56596fbcfa.1502526524.git.arvind.yadav.cs@gmail.com
-
Gustavo A. R. Silva authored
NULL check at line 528: if (!sender || !data_out || !len_out) {, implies that pointer _sender_ might be NULL. Move pointer _sender_ dereference after NULL check in order to avoid a potential NULL pointer dereference. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170812015515.GA8360@embeddedgus
-
- 17 Aug, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for v4.14 * HDMI hot plug IRQ support (instead of polling) * Big driver cleanup from Laurent (no functional changes) * OMAP5 DSI support (only the pinmuxing was missing) * tag 'omapdrm-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (60 commits) drm/omap: Potential NULL deref in omap_crtc_duplicate_state() drm/omap: remove no-op cleanup code drm/omap: rename omapdrm device back drm: omapdrm: Remove omapdrm platform data ARM: OMAP2+: Don't register omapdss device for omapdrm ARM: OMAP2+: Remove unused omapdrm platform device drm: omapdrm: Remove the omapdss driver drm: omapdrm: Register omapdrm platform device in omapdss driver drm: omapdrm: hdmi: Don't allocate PHY features dynamically drm: omapdrm: hdmi: Configure the PHY from the HDMI core version drm: omapdrm: hdmi: Configure the PLL from the HDMI core version drm: omapdrm: hdmi: Pass HDMI core version as integer to HDMI audio drm: omapdrm: hdmi: Replace OMAP SoC model check with HDMI xmit version drm: omapdrm: hdmi: Rename functions and structures to use hdmi_ prefix drm/omap: add OMAP5 DSIPHY lane-enable support drm/omap: use regmap_update_bit() when muxing DSI pads drm: omapdrm: Remove dss_features.h drm: omapdrm: Move supported outputs feature to dss driver drm: omapdrm: Move DSS_FCK feature to dss driver drm: omapdrm: Move PCD, LINEWIDTH and DOWNSCALE features to dispc driver ...
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
More features for 4.14. Nothing too major here. I have a few more additional patches for large page support in vega10 among other things, but they require some resevation object patches from drm-misc-next, so I'll send that request once you've pulled the latest drm-misc-next. Highlights: - Fixes for ACP audio on stoney - SR-IOV fixes for vega10 - various powerplay fixes - lots of code clean up * 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (62 commits) drm/amdgpu/gfx7: fix function name drm/amd/amdgpu: Disabling Power Gating for Stoney platform drm/amd/amdgpu: Added a quirk for Stoney platform drm/amdgpu: jt_size was wrongly counted twice drm/amdgpu: fix missing endian-safe guard drm/amdgpu: ignore digest_size when loading sdma fw for raven drm/amdgpu: Uninitialized variable in amdgpu_ttm_backend_bind() drm/amd/powerplay: fix coding style in hwmgr.c drm/amd/powerplay: refine dmesg info under powerplay. drm/amdgpu: don't finish the ring if not initialized drm/radeon: Fix preferred typo drm/amdgpu: Fix preferred typo drm/radeon: Fix stolen typo drm/amdgpu: Fix stolen typo drm/amd/powerplay: fix coccinelle warnings in vega10_hwmgr.c drm/amdgpu: set gfx_v9_0_ip_funcs as static drm/radeon: switch to drm_*{get,put} helpers drm/amdgpu: switch to drm_*{get,put} helpers drm/amd/powerplay: add CZ profile support drm/amd/powerplay: fix PSI not enabled by kmd ...
-
- 16 Aug, 2017 32 commits
-
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
UAPI Changes: - vc4: Allow userspace to dictate rendering order in submit_cl ioctl (Eric) Cross-subsystem Changes: - vboxvideo: One of Cihangir's patches applies to vboxvideo which is maintained in staging Core Changes: - atomic_legacy_backoff is officially killed (Daniel) - Extract drm_device.h (Daniel) - Unregister drm device on unplug (Daniel) - Rename deprecated drm_*_(un)?reference functions to drm_*_{get|put} (Cihangir) Driver Changes: - vc4: Error/destroy path cleanups, log level demotion, edid leak (Eric) - various: Make various drm_*_funcs structs const (Bhumika) - tinydrm: add support for LEGO MINDSTORMS EV3 LCD (David) - various: Second half of .dumb_{map_offset|destroy} defaults set (Noralf) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Eric Anholt <eric@anholt.net> Cc: Bhumika Goyal <bhumirks@gmail.com> Cc: Cihangir Akturk <cakturk@gmail.com> Cc: David Lechner <david@lechnology.com> Cc: Noralf Trønnes <noralf@tronnes.org> * tag 'drm-misc-next-2017-08-16' of git://anongit.freedesktop.org/git/drm-misc: (50 commits) drm/gem-cma-helper: Remove drm_gem_cma_dumb_map_offset() drm/virtio: Use the drm_driver.dumb_destroy default drm/bochs: Use the drm_driver.dumb_destroy default drm/mgag200: Use the drm_driver.dumb_destroy default drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults drm/msm: Use the drm_driver.dumb_destroy default drm/ast: Use the drm_driver.dumb_destroy default drm/qxl: Use the drm_driver.dumb_destroy default drm/udl: Use the drm_driver.dumb_destroy default drm/cirrus: Use the drm_driver.dumb_destroy default drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults drm/meson: Use .dumb_map_offset and .dumb_destroy defaults drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults drm/vc4: Continue the switch to drm_*_put() helpers drm/vc4: Fix leak of HDMI EDID dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2 dma-buf: add reservation_object_copy_fences (v2) drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD ...
-
Colin Ian King authored
The function st7586_pipe_enable is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'st7586_pipe_enable' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-By: David Lechner <david@lechnology.com> [noralf: fixed: Alignment should match open parenthesis] Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170816092306.10969-1-colin.king@canonical.com
-
Noralf Trønnes authored
Add myself as drivers/gpu/drm/tinydrm maintainer. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502645790-14944-1-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() is just a wrapper around drm_gem_fb_create() now, so use the function directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-21-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_fb_cma_create() and drm_fb_cma_prepare_fb() are just wrappers now, use drm_gem_fb_create() and drm_gem_fb_prepare_fb() directly. Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-14-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
Use the new drm_gem_framebuffer_helper who's code was copied from this helper. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-3-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This library provides helpers for drivers that don't subclass drm_framebuffer and are backed by drm_gem_object. The code is taken from drm_fb_cma_helper. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1502631125-13557-2-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
There are no more users of drm_gem_cma_dumb_map_offset(), so remove it. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-20-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy() which is the drm_driver.dumb_destroy default, so no need to set it. Cc: David Airlie <airlied@linux.ie> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-19-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-17-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-15-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and remove exynos_drm_gem_dumb_map_offset(). Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-14-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-13-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-11-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-10-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-9-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-8-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-7-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-6-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-4-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-3-git-send-email-noralf@tronnes.org
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-2-git-send-email-noralf@tronnes.org
-
Dan Carpenter authored
If the kmalloc() fails then we dereference "state" when we set "state->zpos". Fixes: 3dfeb631 ("drm/omap: Rework the rotation-on-crtc hack") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Tomi Valkeinen authored
The driver sets crtc and plane rotation properties back to 0 degrees in dev_lastclose() using drm_object_property_set_value(). drm_object_property_set_value() doesn't do anything with atomic drivers, and a recent change added WARN_ON() when atomic driver calls the function. So remove the code. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Tomi Valkeinen authored
Now that creating the omapdrm device from the platform code has been removed, we can rename the omapdrm device back to "omapdrm". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdrm platform data are not used anymore, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdrm driver doesn't need the omapdss device anymore. Although it can't be removed completely as the fbdev driver still requires it, we can condition its registration to the usage of the omapfb driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdrm platform device is unused, as a replacement is now registered in the omapdss driver. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdss driver (not to be confused with the omapdss_dss driver) is now a dummy driver with empty probe and remove functions. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The omapdrm platform device is a virtual device created for the sole purpose of handling the omapdss/omapdrm driver split. It should eventually be removed. As a first step to ease refactoring move its registration from platform code to driver code. The omapdrm driver name must be changed internally to avoid probing both the device registered in platform code and the device registered in the omapdss driver, as that would otherwise break bisection. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
There's no need to allocate memory dynamically to duplicate the contents of a const structure, only to store the memory pointer in a const pointer field. Just use the original structures directly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Laurent Pinchart authored
The OMAP4 and OMAP5 HDMI PHYs have different properties that require specific handling in the HDMI PHY driver. This needs knowledge of the PHY version, which is currently inferred from the DSS version. As part of the effort to remove usage of the DSS version, use the HDMI controller version instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-