- 10 Dec, 2012 20 commits
-
-
Greg Kroah-Hartman authored
-
Michal Marek authored
commit fe04ddf7 upstream. There were reports of users destroying their Fedora installs by a kernel tarball that replaces the /lib -> /usr/lib symlink. Let's remove the toplevel directories from the tarball to prevent this from happening. Reported-by:
Andi Kleen <andi@firstfloor.org> Suggested-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Michal Marek <mmarek@suse.cz> [bwh: Fold in commit 3ce9e53e to avoid conflicts] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peng Tao authored
commit fe6e1e8d upstream. If applications use flock to protect its write range, generic NFS will not do read-modify-write cycle at page cache level. Therefore LD should know how to handle non-sector aligned writes. Otherwise there will be data corruption. Signed-off-by:
Peng Tao <tao.peng@emc.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Chris Wilson authored
commit c31407a3 upstream. Reported-and-tested-by:
Francois Tigeot <ftigeot@wolfpond.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55375Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Calvin Walton authored
commit a51d4ed0 upstream. This board is incorrectly detected as having an LVDS connector, resulting in the VGA output (the only available output on the board) showing the console only in the top-left 1024x768 pixels, and an extra LVDS connector appearing in X. It's a desktop Mini-ITX board using an Atom D525 CPU with an NM10 chipset. I've had this board for about a year, but this is the first time I noticed the issue because I've been running it headless for most of its life. Signed-off-by:
Calvin Walton <calvin.walton@kepstin.ca> Signed-off-by:
-
Alan Cox authored
commit 879dca01 upstream. We handle NOTIFY_THROTTLING so don't then fall through to unsupported event. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Ariel Elior authored
commit 4a25417c upstream. fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Mike Galbraith authored
commit fd8ef117 upstream. This reverts commit 800d4d30. Between commits 8323f26c ("sched: Fix race in task_group()") and 800d4d30 ("sched, autogroup: Stop going ahead if autogroup is disabled"), autogroup is a wreck. With both applied, all you have to do to crash a box is disable autogroup during boot up, then reboot.. boom, NULL pointer dereference due to commit 800d4d30 not allowing autogroup to move things, and commit 8323f26c making that the only way to switch runqueues: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81063ac0>] effective_load.isra.43+0x50/0x90 Pid: 7047, comm: systemd-user-se Not tainted 3.6.8-smp #7 MEDIONPC MS-7502/MS-7502 RIP: effective_load.isra.43+0x50/0x90 Process systemd-user-se (pid: 7047, threadinfo ffff880221dde000, task ffff88022618b3a0) Call Trace: select_task_rq_fair+0x255/0x780 try_to_wake_up+0x156/0x2c0 wake_up_state+0xb/0x10 signal_wake_up+0x28/0x40 complete_signal+0x1d6/0x250 __send_signal+0x170/0x310 send_signal+0x40/0x80 do_send_sig_info+0x47/0x90 group_send_sig_info+0x4a/0x70 kill_pid_info+0x3a/0x60 sys_kill+0x97/0x1a0 ? vfs_read+0x120/0x160 ? sys_read+0x45/0x90 system_call_fastpath+0x16/0x1b Code: 49 0f af 41 50 31 d2 49 f7 f0 48 83 f8 01 48 0f 46 c6 48 2b 07 48 8b bf 40 01 00 00 48 85 ff 74 3a 45 31 c0 48 8b 8f 50 01 00 00 <48> 8b 11 4c 8b 89 80 00 00 00 49 89 d2 48 01 d0 45 8b 59 58 4c RIP [<ffffffff81063ac0>] effective_load.isra.43+0x50/0x90 RSP <ffff880221ddfbd8> CR2: 0000000000000000 Signed-off-by:
Mike Galbraith <efault@gmx.de> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jean Delvare authored
commit 7e06b7a3 upstream. * Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so that the callers get the result they expect. * Fix definition of FERR_FAT_FBD_ERR_MASK. * Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on register FERR_NF_FBD. We were lucky they have the same definition. This fixes kernel bug #44131: https://bugzilla.kernel.org/show_bug.cgi?id=44131Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
NeilBrown authored
commit e7c0c3fa upstream. When a replacement operation completes there is a small window when the original device is marked 'faulty' and the replacement still looks like a replacement. The faulty should be removed and the replacement moved in place very quickly, bit it isn't instant. So the code write out to the array must handle the possibility that the only working device for some slot in the replacement - but it doesn't. If the primary device is faulty it just gives up. This can lead to corruption. So make the code more robust: if either the primary or the replacement is present and working, write to them. Only when neither are present do we give up. This bug has been present since replacement was introduced in 3.3, so it is suitable for any -stable kernel since then. Reported-by:
"George Spelvin" <linux@horizon.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Mike Galbraith authored
commit 412d32e6 upstream. A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by:
Mike Galbraith <mgalbraith@suse.de> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Vincent Palatin authored
commit 644c1541 upstream. When a cpu enters S3 state, the FPU state is lost. After resuming for S3, if we try to lazy restore the FPU for a process running on the same CPU, this will result in a corrupted FPU context. Ensure that "fpu_owner_task" is properly invalided when (re-)initializing a CPU, so nobody will try to lazy restore a state which doesn't exist in the hardware. Tested with a 64-bit kernel on a 4-core Ivybridge CPU with eagerfpu=off, by doing thousands of suspend/resume cycles with 4 processes doing FPU operations running. Without the patch, a process is killed after a few hundreds cycles by a SIGFPE. Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Cc: Duncan Laurie <dlaurie@chromium.org> Cc: Olof Johansson <olofj@chromium.org> Link: http://lkml.kernel.org/r/1354306532-1014-1-git-send-email-vpalatin@chromium.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 1dc831bf upstream. - The code relies on rc_pci_fixup being called, which only happens when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting this causes a booting failure with a non-obvious cause. - Update rc_pci_fixup to set the class properly, copying the more modern style from other places - Correct the rc_pci_fixup comment Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Naoya Horiguchi authored
commit 783657a7 upstream. When we try to soft-offline a thp tail page, put_page() is called on the tail page unthinkingly and VM_BUG_ON is triggered in put_compound_page(). This patch splits thp before going into the main body of soft-offlining. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jianguo Wu authored
commit ae64ffca upstream. I enable CONFIG_DEBUG_VIRTUAL and CONFIG_SPARSEMEM_VMEMMAP, when doing memory hotremove, there is a kernel BUG at arch/x86/mm/physaddr.c:20. It is caused by free_section_usemap()->virt_to_page(), virt_to_page() is only used for kernel direct mapping address, but sparse-vmemmap uses vmemmap address, so it is going wrong here. ------------[ cut here ]------------ kernel BUG at arch/x86/mm/physaddr.c:20! invalid opcode: 0000 [#1] SMP Modules linked in: acpihp_drv acpihp_slot edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse vfat fat loop dm_mod coretemp kvm crc32c_intel ipv6 ixgbe igb iTCO_wdt i7core_edac edac_core pcspkr iTCO_vendor_support ioatdma microcode joydev sr_mod i2c_i801 dca lpc_ich mfd_core mdio tpm_tis i2c_core hid_generic tpm cdrom sg tpm_bios rtc_cmos button ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore usb_common sd_mod crc_t10dif processor thermal_sys hwmon scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic ata_piix libata megaraid_sas scsi_mod CPU 39 Pid: 6454, comm: sh Not tainted 3.7.0-rc1-acpihp-final+ #45 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[<ffffffff8103c908>] [<ffffffff8103c908>] __phys_addr+0x88/0x90 RSP: 0018:ffff8804440d7c08 EFLAGS: 00010006 RAX: 0000000000000006 RBX: ffffea0012000000 RCX: 000000000000002c ... Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Reviewd-by:
Wen Congyang <wency@cn.fujitsu.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Alex Deucher authored
commit 804cc4a0 upstream. The save struct is not initialized previously so explicitly mark the crtcs as not used when they are not in use. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 62444b74 upstream. - Stop the displays from accessing the FB - Block CPU access - Turn off MC client access This should fix issues some users have seen, especially with UEFI, when changing the MC FB location that result in hangs or display corruption. v2: fix crtc enabled check noticed by Luca Tettamanti Signed-off-by:
-
Alex Deucher authored
commit 4a15903d upstream. This might be called before we've allocated the radeon_crtcs Signed-off-by:
-
Russell King - ARM Linux authored
commit d356cf5a upstream. PMU interrupts start at IRQ_DOVE_PMU_START, not IRQ_DOVE_PMU_START + 1. Fix the condition. (It may have been less likely to occur had the code been written "if (irq >= IRQ_DOVE_PMU_START" which imho is the easier to understand notation, and matches the normal way of thinking about these things.) Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King - ARM Linux authored
commit 5d3df935 upstream. Fix the acknowledgement of PMU interrupts on Dove: some Dove hardware has not been sensibly designed so that interrupts can be handled in a race free manner. The PMU is one such instance. The pending (aka 'cause') register is a bunch of RW bits, meaning that these bits can be both cleared and set by software (confirmed on the Armada-510 on the cubox.) Hardware sets the appropriate bit when an interrupt is asserted, and software is required to clear the bits which are to be processed. If we write ~(1 << bit), then we end up asserting every other interrupt except the one we're processing. So, we need to do a read-modify-write cycle to clear the asserted bit. However, any interrupts which occur in the middle of this cycle will also be written back as zero, which will also clear the new interrupts. The upshot of this is: there is _no_ way to safely clear down interrupts in this register (and other similarly behaving interrupt pending registers on this device.) The patch below at least stops us creating new interrupts. Signed-off-by:
-
- 06 Dec, 2012 2 commits
-
-
Greg Kroah-Hartman authored
-
H. Peter Anvin authored
commit cb57a2b4 upstream. Modules, in particular oprofile (and possibly other similar tools) need kernel_stack_pointer(), so export it using EXPORT_SYMBOL_GPL(). Cc: Yang Wei <wei.yang@windriver.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Jun Zhang <jun.zhang@intel.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.comSigned-off-by:
-
- 03 Dec, 2012 18 commits
-
-
Greg Kroah-Hartman authored
-
Johannes Berg authored
commit 8f7b8db6 upstream. The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Stanislav Yakovlev authored
commit bf11315e upstream. The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [<c152f90f>] error_code+0x67/0x6c [67607.676067] [<c142f831>] ? skb_put+0x91/0xa0 [67607.676067] [<f8cf5e5b>] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf5e5b>] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf899b>] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [<f8741c5a>] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [<c143d3e8>] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Dan Carpenter authored
commit 5b3900cd upstream. We fixed a bunch of integer overflows in timekeeping code during the 3.6 cycle. I did an audit based on that and found this potential overflow. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
John Stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20121009071823.GA19159@elgon.mountainSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ben Hutchings <ben@decadent.org.uk> [ herton: adapt for 3.5, timekeeper instead of tk pointer ] Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
Colin Cross authored
commit 9d7d6e36 upstream. read_persistent_clock uses a global variable, use a spinlock to ensure non-atomic updates to the variable don't overlap and cause time to move backwards. Signed-off-by:
Colin Cross <ccross@android.com> Signed-off-by:
R Sricharan <r.sricharan@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jaehoon Chung authored
commit 5feb54a1 upstream. We can use up to four bus-clocks; but on module remove, we didn't disable the fourth bus clock. Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Chris Ball <cjb@laptop.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Gavin Shan authored
commit feadf7c0 upstream. The EEH core is talking with the PCI device driver to determine the action (purely reset, or PCI device removal). During the period, the driver might be unloaded and in turn causes kernel crash as follows: EEH: Detected PCI bus error on PHB#4-PE#10000 EEH: This PCI device has failed 3 times in the last hour lpfc 0004:01:00.0: 0:2710 PCI channel disable preparing for reset Unable to handle kernel paging request for data at address 0x00000490 Faulting instruction address: 0xd00000000e682c90 cpu 0x1: Vector: 300 (Data Access) at [c000000fc75ffa20] pc: d00000000e682c90: .lpfc_io_error_detected+0x30/0x240 [lpfc] lr: d00000000e682c8c: .lpfc_io_error_detected+0x2c/0x240 [lpfc] sp: c000000fc75ffca0 msr: 8000000000009032 dar: 490 dsisr: 40000000 current = 0xc000000fc79b88b0 paca = 0xc00000000edb0380 softe: 0 irq_happened: 0x00 pid = 3386, comm = eehd enter ? for help [c000000fc75ffca0] c000000fc75ffd30 (unreliable) [c000000fc75ffd30] c00000000004fd3c .eeh_report_error+0x7c/0xf0 [c000000fc75ffdc0] c00000000004ee00 .eeh_pe_dev_traverse+0xa0/0x180 [c000000fc75ffe70] c00000000004ffd8 .eeh_handle_event+0x68/0x300 [c000000fc75fff00] c0000000000503a0 .eeh_event_handler+0x130/0x1a0 [c000000fc75fff90] c000000000020138 .kernel_thread+0x54/0x70 1:mon> The patch increases the reference of the corresponding driver modules while EEH core does the negotiation with PCI device driver so that the corresponding driver modules can't be unloaded during the period and we're safe to refer the callbacks. Reported-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [ herton: backported for 3.5, adjusted driver assignments, return 0 instead of NULL, assume dev is not NULL ] Signed-off-by:
-
Manuel Lauss authored
commit a3cea989 upstream. Since 4.4 GCC on MIPS no longer recognizes the "h" constraint, leading to this build failure: CC lib/mpi/generic_mpih-mul1.o lib/mpi/generic_mpih-mul1.c: In function 'mpihelp_mul_1': lib/mpi/generic_mpih-mul1.c:50:3: error: impossible constraint in 'asm' This patch updates MPI with the latest umul_ppm implementations for MIPS. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: James Morris <jmorris@namei.org> Patchwork: https://patchwork.linux-mips.org/patch/4612/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
Chuansheng Liu authored
commit 8ffeb9b0 upstream. In get_sample_period(), unsigned long is not enough: watchdog_thresh * 2 * (NSEC_PER_SEC / 5) case1: watchdog_thresh is 10 by default, the sample value will be: 0xEE6B2800 case2: set watchdog_thresh is 20, the sample value will be: 0x1 DCD6 5000 In case2, we need use u64 to express the sample period. Otherwise, changing the threshold thru proc often can not be successful. Signed-off-by:
liu chuansheng <chuansheng.liu@intel.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Shuah Khan <shuah.khan@hp.com> Signed-off-by:
-
Johan Hovold authored
commit 5260e458 upstream. Make sure generic close is called at close. The driver relies on the generic write implementation but did not call generic close. Note that the call to kill the read urb is not redundant, as mct_u232 uses an interrupt urb from the second port as the read urb and that generic close therefore fails to kill it. Compile-only tested. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Thierry Escande authored
commit 16a78e9f upstream. list_add was called with swapped parameters Signed-off-by:
Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Waldemar Rymarkiewicz authored
commit 70418e6e upstream. cmd is allocated in pn533_dep_link_up and passed as an arg to pn533_send_cmd_frame_async together with a complete cb. arg is passed to the cb and must be kfreed there. Signed-off-by:
Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by:
-
Szymon Janc authored
commit 770f750b upstream. cmd was freed in pn533_dep_link_up regardless of pn533_send_cmd_frame_async return code. Cmd is passed as argument to pn533_in_dep_link_up_complete callback and should be freed there. Signed-off-by:
Szymon Janc <szymon.janc@tieto.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 25ec43d3 upstream. The previous website doesn't exist anymore. Update it to one site that actually exists. Signed-off-by:
-
David Milburn authored
commit b03e66a6 upstream. If kdump is triggered with pending IO, controller may not respond causing kdump to fail. http://marc.info/?l=linux-ide&m=133032255424658&w=2 During error recovery ata_do_dev_read_id never completes due hang in mmio_insw. ata_do_dev_read_id ata_sff_data_xfer ioread16_rep mmio_insw if DMA start bit is cleared before reset, PIO command is successful and kdump succeeds. Signed-off-by:
David Milburn <dmilburn@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
joshua.a.hay@intel.com authored
commit df376f0d upstream. This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by:
Josh Hay <joshua.a.hay@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Abdallah Chatila <Abdallah.Chatila@ericsson.com> Signed-off-by:
-
Petr Matousek authored
commit 6d1068b3 upstream. On hosts without the XSAVE support unprivileged local user can trigger oops similar to the one below by setting X86_CR4_OSXSAVE bit in guest cr4 register using KVM_SET_SREGS ioctl and later issuing KVM_RUN ioctl. invalid opcode: 0000 [#2] SMP Modules linked in: tun ip6table_filter ip6_tables ebtable_nat ebtables ... Pid: 24935, comm: zoog_kvm_monito Tainted: G D 3.2.0-3-686-pae EIP: 0060:[<f8b9550c>] EFLAGS: 00210246 CPU: 0 EIP is at kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] EAX: 00000001 EBX: 000f387e ECX: 00000000 EDX: 00000000 ESI: 00000000 EDI: 00000000 EBP: ef5a0060 ESP: d7c63e70 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process zoog_kvm_monito (pid: 24935, ti=d7c62000 task=ed84a0c0 task.ti=d7c62000) Stack: 00000001 f70a1200 f8b940a9 ef5a0060 00000000 00200202 f8769009 00000000 ef5a0060 000f387e eda5c020 8722f9c8 00015bae 00000000 ed84a0c0 ed84a0c0 c12bf02d 0000ae80 ef7f8740 fffffffb f359b740 ef5a0060 f8b85dc1 0000ae80 Call Trace: [<f8b940a9>] ? kvm_arch_vcpu_ioctl_set_sregs+0x2fe/0x308 [kvm] ... [<c12bfb44>] ? syscall_call+0x7/0xb Code: 89 e8 e8 14 ee ff ff ba 00 00 04 00 89 e8 e8 98 48 ff ff 85 c0 74 1e 83 7d 48 00 75 18 8b 85 08 07 00 00 31 c9 8b 95 0c 07 00 00 <0f> 01 d1 c7 45 48 01 00 00 00 c7 45 1c 01 00 00 00 0f ae f0 89 EIP: [<f8b9550c>] kvm_arch_vcpu_ioctl_run+0x92a/0xd13 [kvm] SS:ESP 0068:d7c63e70 QEMU first retrieves the supported features via KVM_GET_SUPPORTED_CPUID and then sets them later. So guest's X86_FEATURE_XSAVE should be masked out on hosts without X86_FEATURE_XSAVE, making kvm_set_cr4 with X86_CR4_OSXSAVE fail. Userspaces that allow specifying guest cpuid with X86_FEATURE_XSAVE even on hosts that do not support it, might be susceptible to this attack from inside the guest as well. Allow setting X86_CR4_OSXSAVE bit only if host has XSAVE support. Signed-off-by:
Petr Matousek <pmatouse@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 6d935928 upstream. Sometimes, warnings about ioctls to partition happen often enough that they form majority of the warnings in the kernel log and users complain. In some cases warnings are about ioctls such as SG_IO so it's not good to get rid of the warnings completely as they can ease debugging of userspace problems when ioctl is refused. Since I have seen warnings from lots of commands, including some proprietary userspace applications, I don't think disallowing the ioctls for processes with CAP_SYS_RAWIO will happen in the near future if ever. So lets just stop warning for processes with CAP_SYS_RAWIO for which ioctl is allowed. Acked-by:
Paolo Bonzini <pbonzini@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: James Bottomley <JBottomley@parallels.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: satoru takeuchi <satoru.takeuchi@gmail.com> Signed-off-by:
-
