* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (40 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Make auxio a real driver.
  [PARPORT] sunbpp: Convert to new SBUS device framework.
  [Documentation]: Update probing info in sbus_drivers.txt
  [SCSI] qlogicpti: Convert to new SBUS device framework.
  [SCSI] esp: Fix bug in esp_remove_common.
  [NET] sunhme: Kill useless loop over sdevs in quattro_sbus_find().
  [NET] myri_sbus: Kill unused next_module struct member.
  [NET] myri_sbus: Convert to new SBUS device layer.
  [NET] sunqe: Convert to new SBUS driver layer.
  [NET] sunbmac: Convert over to new SBUS device framework.
  [NET] sunlance: Convert to new SBUS driver framework.
  [NET] sunhme: Convert to new SBUS driver framework.
  [NET] sunhme: Kill __sparc__ and __sparc_v9__ ifdefs.
  [SCSI] sparc: Port esp to new SBUS driver layer.
  [SOUND] sparc: Port amd7930 to new SBUS device layer.
  [SBUS]: Rewrite and plug into of_device framework.
  [SPARC]: Port of_device layer and make ebus use it.
  [SPARC]: Port sparc64 in-kernel device tree code to sparc32.
  [SPARC64]: Add of_device layer and make ebus/isa use it.
  ...

This is the minimal resume trace code to find which device resume (if
any) results in problems.  Usually, you'd use the information this
generates as a starting point to adding more fine-grained trace event
points.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Considering that there isn't a lot of hw we can depend on during resume,
this is about as good as it gets.

This is x86-only for now, although the basic concept (and most of the
code) will certainly work on almost any platform.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Do not try to kfree(esp), scsi_host_put() takes care of that.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

And make it a real PCI driver too.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use CONFIG_SPARC and CONFIG_SPARC64 instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

This also turns the driver into a new-style scsi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

I severely apologize, I was still learning how to program
in C when I wrote this stuff 10 years ago...
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Sparcspkr and power drivers are converted, to make sure it works.
Eventually the SBUS device layer will use this as a sub-class.

I really cannot cut loose on that bit until sparc32 is given the
same infrastructure.
Signed-off-by: David S. Miller <davem@davemloft.net>

Import some more stuff from powerpc.

Add of_device_is_compatible(), and of_find_compatible_node().
Export some more of the other routines to modules.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The remaining ones occur before we have imported the
device tree.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Unused outside of initial bus probe scan.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

One thing this change pointed out was that we really should
pull the "get 'local-mac-address' property" logic into a helper
function all the network drivers can call.
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise the in-kernel PROM device tree isn't built yet,
and therefore the present cpu bits don't get set properly.
Signed-off-by: David S. Miller <davem@davemloft.net>

On some sun4v systems, after netboot the ethernet controller and it's
DMA mappings can be left active.  The net result is that the kernel
can end up using memory the ethernet controller will continue to DMA
into, resulting in corruption.

To deal with this, we are more careful about importing IOMMU
translations which OBP has left in the IO-TLB.  If the mapping maps
into an area the firmware claimed was free and available memory for
the kernel to use, we demap instead of import that IOMMU entry.

This is going to cause the network chip to take a PCI master abort on
the next DMA it attempts, if it has been left going like this.  All
tests show that this is handled properly by the PCI layer and the e1000
drivers.
Signed-off-by: David S. Miller <davem@davemloft.net>

If we end up zero'ing out the size of one of the entries,
pop it out of the array completely because some code that
examines these things cannot handle a zero length element
properly.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

This encodes a common idiomatic coding pattern used when
dealing with integer properties.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Allow them to be enabled with "pci=irq_verbose" on the
boot command line.
Signed-off-by: David S. Miller <davem@davemloft.net>

It can be pushed even further down, but this is a first step.
Signed-off-by: David S. Miller <davem@davemloft.net>