The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed.  This patch updates them to reflect
the requirements for THERMAL.

This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.

ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Airlie <airlied@redhat.com>

We previously used a static array, but some new systems
had more states then we had array space, so dynamically
allocate space based on the number of states in the vbios.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33851Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

The accelerate mode bit gets checked by certain atom
command tables to set up some register state.  It needs
to be clear when setting modes and set when not.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26942Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some BIOSs (eg.  the AMI BIOS on the Asus P4P800 motherboard) don't
initialise the GART address, and pcibios_assign_resources() can ignore it
because it can be marked as a host bridge (see
https://bugzilla.kernel.org/show_bug.cgi?id=24392#c5 for details).  This
was handled correctly up to 2.6.35, but the pci_enable_device() cleanup in
2.6.36 96576a9e ("agp: intel-agp: do not use PCI resources before
pci_enable_device()") means that the kernel tries to enable the GART
before assigning it an address; in such cases the GART overlaps with other
device assignments and ends up being disabled.

This patch fixes https://bugzilla.kernel.org/show_bug.cgi?id=24392

Note that I imagine efficeon-agp.c probably has the same problem, but
I can't test that and I'd like to make sure this patch is suitable for
-stable (since 2.6.36 and 2.6.37 are affected).
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Kulikov Vasiliy <segooon@gmail.com>
Cc: Florian Mickler <florian@mickler.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit f191f144.

The AMD 751 and 761 chipsets are used on the UP1000, UP1100, and UP1500
OEM motherboards, but they neglect to do anything to make AGP work.

According to Ivan Kokshaysky:
There is quite fundamental conflict between the Alpha architecture and
x86 AGP implementation - Alpha is entirely cache coherent by design,
while x86 AGP is not (I mean native AGP DMA transactions, not a PCI over
AGP). There are no such things as non-cacheable mappings or software
support for cache flushing/invalidation on Alpha, so x86 AGP code won't
work on Nautilus.

So there's no point in allowing this driver to be configured on Alpha.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

amd-k7-agp can't be built on Alpha anymore, so remove now unnecessary
code.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These should be handled by the clear_state setup, but set them
directly as well just to be sure.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Adds new packet to disable DX9 constant emulation.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

0x4243 is a PCI bridge, not a GPU.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33815Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

New algo is used for r5xx+ and legacy is used for
r1xx-r4xx, rv515.

I've tested on all relevant GPUs and monitors that I
have access to and have found no problems.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26562
https://bugzilla.kernel.org/show_bug.cgi?id=26552
May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=32556Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Based on the vbios code.  This should hopefully
fix the pll problems on a number of avivo asics
once it's enabled.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Seems more reliable.  Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26552Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Some fixes to the thermal sensor code:
- handle negative numbers
- properly handle temp calculation on different asics
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next:
  drm/nv50: fix display on 0x50
  drm/nouveau: correctly pair hwmon_init and hwmon_fini

* 'intel/drm-intel-fixes' of /ssd/git/drm-next:
  drm/i915: Only bind to function 0 of the PCI device
  drm/i915: Suppress spurious vblank interrupts
  drm: Avoid leak of adjusted mode along quick set_mode paths
  drm: Simplify and defend later checks when disabling a crtc
  drm: Don't switch fb when disabling an output
  drm/i915: Reset crtc after resume
  drm/i915/crt: Force the initial probe after reset
  drm/i915: Reset state after a GPU reset or resume
  drm: Add an interface to reset the device
  drm/i915/sdvo: If at first we don't succeed in reading the response, wait

Accidently busted a while back.  We'll be creating objects that aren't
necessary here, but, they're never used so no harm..
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

I broke this with my commit
07cfe0e7

This fixes fdo #33434
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Early chipsets (gen2/3) used function 1 as a placeholder for multi-head.
We used to ignore these since they were not assigned to
PCI_CLASS_DISPLAY_VGA. However with 934f992c we attempt to bind to all
Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu
systems. This fails hard on gen2/3.
Reported-by: Ferenc Wágner <wferi@niif.hu>
Tested-by: Ferenc Wágner <wferi@niif.hu>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Hugh Dickins found that characters in xterm were going missing and oft
delayed. Being the curious type, he managed to associate this with the
new high-precision vblank patches; disabling these he found, restored
the orderliness of his characters.

The oddness begins when one realised that Hugh was not using vblanks at
all on his system (fvwm and some xterms). Instead, all he had to go on
were warning of a pipe underrun, curiously enough at around 60Hz. He
poked and found that in addition to the underrun warning, the hardware
was flagging the start of a new frame, a vblank, which in turn was
kicking off the pending vblank processing code.

There is little we can do for the underruns on Hugh's machine, a
Crestline [965GM], which must have its FIFO watermarks set to 8.
However, we do not need to process the vblank if we know that they are
disabled...
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

By setting the FB of a CRTC to NULL, we are turning off the CRTC (and so
disable the unused encoders and connectors). As such we can simplify the
later tests by making sure the set->mode is NULL. Setting the
num_connectors to zero means that we do not need to loop over the unused
connectors.

All current usage appears correct, this only builds additional defense
into the routine.

References: https://bugzilla.kernel.org/show_bug.cgi?id=27722Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

In drm_crtc_helper_set_config, we call drm_crtc_helper_set_mode which
may return early and do no operation if the crtc is to be disabled. In
this case we merrily swap to the new fb, discarding the old_fb believing
that it has been cleaned up. However, due to the early return, the
old_fb was not presented to the backend for correct reaping, and nor was
the new one - which is about to be reaped via the
drm_helper_disable_unused_functions(), leading to incorrect refcounting
of the pinned objects.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27722
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29230Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This error is reported by cppcheck:
drivers/gpu/drm/radeon/radeon_encoders.c:1066: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead?

It looks like cppcheck is correct, so fix this. No test was run.

Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'stable/bug-fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Route halt operations to safe_halt pvop.
  xen/e820: Guard against E820_RAM not having page-aligned size or start.
  xen/p2m: Mark INVALID_P2M_ENTRY the mfn_list past max_pfn.

The augmented rbtree helper functions are not exported to modules right
now.

(We have started using augmented rbtrees in the upcoming version of
drbd.)
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: avoid picking MDS that is not active
  ceph: avoid immediate cap check after import
  ceph: fix flushing of caps vs cap import
  ceph: fix erroneous cap flush to non-auth mds
  ceph: fix cap_wanted_delay_{min,max} mount option initialization
  ceph: fix xattr rbtree search
  ceph: fix getattr on directory when using norbytes

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nv50: fix regression on IGPs
  drm/radeon/kms: re-emit full context state for evergreen blits
  drm/radeon/kms: release CMASK access in preclose_kms
  drm/radeon/kms: fix r6xx+ scanout on BE systems
  drm/radeon/kms: clean up some magic numbers
  drm/radeon/kms: only enable HDMI mode if radeon audio is enabled
  radeon/kms: fix dp displayport mode validation
  drm/nvc0/grctx: correct an off-by-one
  drm/nv50: Fix race with PFIFO during PGRAPH context destruction.
  drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.
  drm/nvc0: implement irq handler for whatever's at 0x14xxxx
  drm/nvc0: fix incorrect TPC register setup
  drm/nouveau: probe for adt7473 before f75375
  drm/nouveau: remove dead function definition

* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nv50: fix regression on IGPs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

clear state doesn't seem to work properly in some cases

Fixes hangs in heavy 3D on some evergreen cards reported on
IRC.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=33381
possibly others.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@gmail.com>

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Use rq->clock_task instead of rq->clock for correctly maintaining load averages
  sched: Fix/remove redundant cfs_rq checks
  sched: Fix sign under-flows in wake_affine

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  percpu, x86: Fix percpu_xchg_op()
  x86: Remove left over system_64.h
  x86-64: Don't use pointer to out-of-scope variable in dump_trace()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: bfin_sdh: fix alloc size for private data
  mmc: sdhci-s3c: add platform_8bit_width() hook
  mmc: jz4740: don't treat NULL clk as an error
  mmc: mmci: don't read command response when invalid
  mmc: ushc: Remove duplicate include of usb.h

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
  bnx2: Eliminate AER error messages on systems not supporting it
  cnic: Fix big endian bug
  xfrm6: Don't forget to propagate peer into ipsec route.
  tg3: Use new VLAN code
  bonding: update documentation - alternate configuration.
  TCP: fix a bug that triggers large number of TCP RST by mistake
  MAINTAINERS: remove Reinette Chatre as iwlwifi maintainer
  rt2x00: add device id for windy31 usb device
  mac80211: fix a crash in ieee80211_beacon_get_tim on change_interface
  ipv6: Revert 'administrative down' address handling changes.
  textsearch: doc - fix spelling in lib/textsearch.c.
  USB NET KL5KUSB101: Fix mem leak in error path of kaweth_download_firmware()
  pch_gbe: don't use flush_scheduled_work()
  bnx2: Always set ETH_FLAG_TXVLAN
  net: clear heap allocation for ethtool_get_regs()
  ipv6: Always clone offlink routes.
  dcbnl: make get_app handling symmetric for IEEE and CEE DCBx
  tcp: fix bug in listening_get_next()
  inetpeer: Use correct AVL tree base pointer in inet_getpeer().
  GRO: fix merging a paged skb after non-paged skbs
  ...

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (lis3) turn down the no IRQ message
  hwmon: (asus_atk0110) Override interface detection on Sabertooth X58
  hwmon: (applesmc) Properly initialize lockdep attributes

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Don't enable interrupts while running in_interrupt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  avr32: add missing include causing undefined pgtable_page_* references

With this patch, the cpuidle driver does not load and
does not issue the mwait operations. Instead the hypervisor
is doing them (b/c we call the safe_halt pvops call).

This fixes quite a lot of bootup issues wherein the user had
to force interrupts for the continuation of the bootup.

Details are discussed in:

http://lists.xensource.com/archives/html/xen-devel/2011-01/msg00535.html

[v2: Wrote the commit description]
Reported-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>