- 17 Feb, 2024 38 commits
-
-
Abhishek Pandit-Subedi authored
PD major revision for the port partner is described in GET_CONNECTOR_CAPABILITY and is only valid on UCSI 2.0 and newer. Update the pd_revision on the partner if the UCSI version is 2.0 or newer. Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by:
Prashant Malani <pmalani@chromium.org> Signed-off-by:
Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Link: https://lore.kernel.org/r/20240209143723.v5.3.Idf7d373c3cbb54058403cb951d644f1f09973d15@changeidSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Abhishek Pandit-Subedi authored
Update the data structures for ucsi_connector_capability and ucsi_connector_status to UCSIv3. Reviewed-by:
-
Abhishek Pandit-Subedi authored
Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was increased from 16 to 256. In order to avoid overflowing reads for older systems, add a mechanism to use the read UCSI version to truncate read sizes on UCSI v1.2. Tested-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
-
Michael Grzeschik authored
If an frame was transmitted incomplete to the host, we set the UVC_STREAM_ERR bit in the header for the last request that is going to be queued. This way the host will know that it should drop the frame instead of trying to display the corrupted content. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240214-uvc-error-tag-v1-2-37659a3877fe@pengutronix.deSigned-off-by:
-
Michael Grzeschik authored
If the request that was missed was zero bytes long, it is likely that the overall transferred frame was not affected. So don't flag the frame incomplete in that case. Signed-off-by:
-
Michael Grzeschik authored
We refactor the complete handler since the return path with the locking are really difficult to follow. Just simplify the function by switching the logic return it on an disabled endpoint early. This way the second level of indentation can be removed. Signed-off-by:
-
Michael Grzeschik authored
By toggling the condition check for a valid buffer, the else path can be completely avoided. Signed-off-by:
-
Michael Grzeschik authored
The pump function is running in an while(1) loop. The only case this loop will be escaped is the two breaks. In both cases the req is valid. Therefor the check for an not set req can be dropped and setting the req to NULL does also has never any effect. Signed-off-by:
-
Heikki Krogerus authored
The USB role switch does not always have the _PLD (Physical Location of Device) in ACPI tables. If it's missing, assigning the PLD hash of the port to the switch. That should guarantee that the USB Type-C port mapping code is always able to find the connection between the two (the port and the switch). Tested-by:
Uday Bhat <uday.m.bhat@intel.com> Signed-off-by:
-
Heikki Krogerus authored
This is probable useful information to have in user space in general, but it's primarily needed for the xHCI DbC (Debug Capability). When xHCI DbC is being used, the USB port needs to be muxed to the xHCI even in device role. In xHCI DbC mode, the xHCI is the USB device controller. Tested-by:
-
Roger Quadros authored
Add PHY2 register space to DT binding documentation. We use minItems: 1 as DT update will come later and we don't want warnings for existing DTs. So far this register space was not required but due to the newly identified Errata i2409 [1] we need to poke this register space. [1] https://www.ti.com/lit/er/sprz487d/sprz487d.pdfSigned-off-by:
Roger Quadros <rogerq@kernel.org> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240214-for-v6-9-am62-usb-errata-3-0-v3-4-147ec5eae18c@kernel.orgSigned-off-by:
-
Stefan Eichenberger authored
The peer-hub is used to model the relationship between the USB 2 and USB 3 hub. However, it is possible to only connect USB 2 without having USB 3. Therefore, the peer-hub property should not be marked as required. Signed-off-by:
Stefan Eichenberger <stefan.eichenberger@toradex.com> Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Reviewed-by:
Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20240130073505.8916-1-eichest@gmail.comSigned-off-by:
-
Colin Ian King authored
The variable retval is being assigned a value that is not being read and is being re-assigned a new value a couple of statements later. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/usb/image/mdc800.c:634:2: warning: Value stored to 'retval' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240207113730.2444296-1-colin.i.king@gmail.comSigned-off-by:
-
Colin Ian King authored
The variable offset is being assigned a value that is not being read afterwards, the assignment is redundant and can be removed. Cleans up clang scan warning: drivers/usb/storage/freecom.c:537:2: warning: Value stored to 'offset' is never read [deadcode.DeadStores] Signed-off-by:
-
Guan-Yu Lin authored
Replace the self-rolled implementations with kstrtobool(). This reduces the maintenance efforts in the future. Signed-off-by:
Guan-Yu Lin <guanyulin@google.com> Link: https://lore.kernel.org/r/20240202030301.2396374-1-guanyulin@google.comSigned-off-by:
-
Paul Cercueil authored
Add documentation for the three ioctls used to attach or detach externally-created DMABUFs, and to request transfers from/to previously attached DMABUFs. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20240130122340.54813-5-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
This patch introduces three new ioctls. They all should be called on a data endpoint (ie. not ep0). They are: - FUNCTIONFS_DMABUF_ATTACH, which takes the file descriptor of a DMABUF object to attach to the endpoint. - FUNCTIONFS_DMABUF_DETACH, which takes the file descriptor of the DMABUF to detach from the endpoint. Note that closing the endpoint's file descriptor will automatically detach all attached DMABUFs. - FUNCTIONFS_DMABUF_TRANSFER, which requests a data transfer from / to the given DMABUF. Its argument is a structure that packs the DMABUF's file descriptor, the size in bytes to transfer (which should generally be set to the size of the DMABUF), and a 'flags' field which is unused for now. Before this ioctl can be used, the related DMABUF must be attached with FUNCTIONFS_DMABUF_ATTACH. These three ioctls enable the FunctionFS code to transfer data between the USB stack and a DMABUF object, which can be provided by a driver from a completely different subsystem, in a zero-copy fashion. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20240130122340.54813-4-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
This exact same code was duplicated in two different places. Signed-off-by:
-
Paul Cercueil authored
Add a new 'sg_was_mapped' field to the struct usb_request. This field can be used to indicate that the scatterlist associated to the USB transfer has already been mapped into the DMA space, and it does not have to be done internally. Signed-off-by:
-
Luca Weiss authored
Via the PMIC GLINK driver we can get info about fuel gauge, charger and USB connector events. Add the node to the dts and configure USB so that role switching works. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Acked-by:
-
Frank Li authored
Remove 'snps,host-vbus-glitches-quirk' and apply workaround unconditionally. It is safer to keep vbus disabled before handing over to xhci driver. So needn't 'snps,host-vbus-glitches' property to enable it and apply it unconditionally. Remove all host_vbus_glitches variable and call dwc3_power_off_all_roothub_ports() directly. Signed-off-by:
Frank Li <Frank.Li@nxp.com> Acked-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by:
-
Frank Li authored
Drop 'snps,host-vbus-glitches-quirk'. It is safer to keep vbus disabled before handing over to xhci driver. Needn't this property to control enable workaround. Apply workaround unconditional. Signed-off-by:
-
Dan Carpenter authored
The ioremap() function doesn't return error pointers, it returns NULL on error. Update the check. Fixes: 2d2a3349 ("usb: dwc3: Add workaround for host mode VBUS glitch when boot") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Acked-by:
-
Colin Ian King authored
The pointer trb is being assigned a value that is not being read afterwards, it is being re-assigned later inside a for_each_sg loop. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/usb/dwc3/gadget.c:3432:19: warning: Value stored to 'trb' during its initialization is never read [deadcode.DeadStores] Signed-off-by:
-
Thinh Nguyen authored
The driver dwc3 deviates from the programming guide in regard to endpoint configuration. It does this command sequence: DEPSTARTCFG -> DEPXFERCFG -> DEPCFG Instead of the suggested flow: DEPSTARTCFG -> DEPCFG -> DEPXFERCFG The reasons for this deviation were as follow, quoted: 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is incorrect in the scenario of multiple interfaces. 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new endpoint on alt setting (8.1.6). Regarding 1), DEPSTARTCFG resets the endpoints' resource and can be a problem if used with SET_INTERFACE request of a multiple interface configuration. But we can still satisfy the programming guide requirement by assigning the endpoint resource as part of usb_ep_enable(). We will only reset endpoint resources on controller initialization and SET_CONFIGURATION request. Regarding 2), the later versions of the programming guide were updated to clarify this flow (see "Alternate Initialization on SetInterface Request" of the programming guide). As long as the platform has enough physical endpoints, we can assign resource to a new endpoint. The order of the command sequence will not be a problem to most platforms for the current implementation of the dwc3 driver. However, this order is required in different scenarios (such as initialization during controller's hibernation restore). Let's keep the flow consistent and follow the programming guide. Signed-off-by:
-
Niko Mauno authored
Update the default USB device authorization mode help text so that the meaning of the option and it's available values are described more accurately. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/linux-usb/CAMuHMdUy793gzDVR0jfNnx5TUdJ_2MKH5NPGSgHkytAhArtqmw@mail.gmail.com/Signed-off-by:
Niko Mauno <niko.mauno@vaisala.com> Link: https://lore.kernel.org/r/20240213124518.20231-1-niko.mauno@vaisala.comSigned-off-by:
-
Wesley Cheng authored
Add an example on enabling of USB offload for the Q6DSP. The routing can be done by the mixer, which can pass the multimedia stream to the USB backend. Acked-by:
Wesley Cheng <quic_wcheng@quicinc.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240217001017.29969-37-quic_wcheng@quicinc.comSigned-off-by:
-
Wesley Cheng authored
Add a dt-binding to describe the definition of enabling the Q6 USB backend device for audio offloading. The node carries information, which is passed along to the QC USB SND class driver counterpart. These parameters will be utilized during QMI stream enable requests. Reviewed-by:
-
Mathias Nyman authored
Expose xhci_stop_endpoint_sync() which is a synchronous variant of xhci_queue_stop_endpoint(). This is useful for client drivers that are using the secondary interrupters, and need to stop/clean up the current session. The stop endpoint command handler will also take care of cleaning up the ring. Modifications to repurpose the new API into existing stop endpoint sequences was implemented by Wesley Cheng. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Co-developed-by:
-
Mathias Nyman authored
Some sequences, will require traversing through the entire event ring without handling the event TRB. This is ideal for when secondary interrupters that are utilized by external entities need to clean up the interrupter's event rings during halting of the XHCI HCD. Signed-off-by:
-
Mathias Nyman authored
Check if the event ring exists and is valid once when the event handler is called, not before every individual event TRB. At this point the interrupter is valid, so no need to check that. Signed-off-by:
-
Mathias Nyman authored
Add unhandled_event_trb() that returns true in case xHC hardware has written new event trbs to the event ring that driver has not yet handled. Signed-off-by:
-
Mathias Nyman authored
Split the main XHCI interrupt handler into a different API, so that other potential interrupters can utilize similar event ring handling. A scenario would be if a secondary interrupter required to skip pending events in the event ring, which would warrant a similar set of operations. Signed-off-by:
-
Mathias Nyman authored
The event ring dequeue pointer field (ERDP) in xHC hardware is used to inform controller how far the driver has processed events on the event ring. In the case all events are handled and event ring is empty then the address of the TRB after the last processed one should be written. This TRB is both the enqueue and dequeue pointer. But in case we are writing the ERDP in the middle of processing several events then ERDP field should be written with the "up to and including" address of the last handled event TRB. Currenly each ERDP write by driver is done as if all events are handled and ring is empty. Fix this by adjusting the order when software dequeue "inc_deq()" is called and hardware dequeue "xhci_update_erst_dequeue()" is updated. Details in xhci 1.2 specification section 4.9.4: "System software shall write the Event Ring Dequeue Pointer (ERDP) register to inform the xHC that it has completed the processing of Event TRBs up to and including the Event TRB referenced by the ERDP. The detection of a Cycle bit mismatch in an Event TRB processed by software indicates the location of the xHC Event Ring Enqueue Pointer and that the Event Ring is empty. Software shall write the ERDP with the address of this TRB to indicate that it has processed all Events in the ring" This change depends on fixes made to relocate inc_deq() calls captured in the below commits: commit 3321f84b ("xhci: simplify event ring dequeue tracking for transfer events") commit d1830364 ("xhci: Simplify event ring dequeue pointer update for port change events") Fixes: dc0ffbea ("usb: host: xhci: update event ring dequeue pointer on purpose") Signed-off-by:
-
Mathias Nyman authored
The event_ring_deq parameter is used to check if the event ring dequeue position is updated while calling by xhci_handle_event(), meaning there was an actual event on the ring to handle. In this case the driver needs to inform hardware about the updated dequeue position. Basically event_ring_deq just stores the old event ring dequeue position before calling the event handler. Keeping track of software event dequeue updates this way is no longer useful as driver anyways reads the current hardware dequeue position within the handle event, and checks if it needs to be updated. The driver might anyway need to modify the EHB (event handler busy) bit in the same register as the dequeue pointer even if the actual dequeue position did not change. Signed-off-by:
-
Mathias Nyman authored
isoc_bei_interval is used to balance how often completed isochronous events cause interrupts. If interval is too large then the event ring may fill up before the completed isoc TRBs are handled. isoc_bei_interval is tuned based on how full the event ring is. isoc_bei_interval variable needs to be per interrupter as with several interrupters each one has its own event ring. move isoc_bei_interval variable to the interrupter structure. if a secondary interrupter does not care about this feature then keep isoc_bei_interval 0. Signed-off-by:
-
Mathias Nyman authored
Add a helper to set the interrupt moderation interval for an interrupter. Each interrupter can have its own moderation value. Hardware has a 16bit register for the moderation value, each step is 250ns. Helper function imod_interval argument is in nanoseconds. Values from 0 to 16383750 (250 x 0xffff) are accepted. 0 means no interrupt throttling. Signed-off-by:
-
Mathias Nyman authored
Each interrupter has an interrupt pending (IP) bit that should be cleared in the interrupt handler. This is done automatically for systems using MSI/MSI-X interrupts. Secondary interrupters used by audio offload may not actually trigger MSI/MSI-X messages, so driver may need to clear the IP bit manually for these, even if the primary interrupter IP is cleared automatically. Add an ip_autoclear flag to each interrupter that driver can configure when requesting an interrupt for that xHC interrupter, and move the interrupt pending clearing code to its own helper function. Use this ip_autoclear flag instead of the current hcd->msi_enabled to check if IP flag is cleared by software. [Moved ip_autoclear into xhci and set based on msi_enabled -wcheng] Signed-off-by:
-
- 08 Feb, 2024 2 commits
-
-
Luca Weiss authored
The QCM6490 Linux Android firmware needs this workaround as well. Add it to the list. Acked-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by:
-
Luca Weiss authored
Document the QCM6490 compatible used to describe the pmic glink on this platform. Reviewed-by:
-
