- 14 Jun, 2024 33 commits
-
-
Yunxiang Li authored
Here since we are in reset and takes the reset_domain write side lock already. We can't use the flush tlb helper which tries to take the read side. Signed-off-by:
Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yunxiang Li authored
When amdgpu_gart_invalidate_tlb helper is introduced this part was left out of the conversion. Avoid the code duplication here. Signed-off-by:
-
Yunxiang Li authored
At this point the gart is not set up, there's no point to invalidate tlb here and it could even be harmful. Signed-off-by:
-
Yunxiang Li authored
is_hws_hang and is_resetting serves pretty much the same purpose and they all duplicates the work of the reset_domain lock, just check that directly instead. This also eliminate a few bugs listed below and get rid of dqm->ops.pre_reset. kfd_hws_hang did not need to avoid scheduling another reset. If the on-going reset decided to skip GPU reset we have a bad time, otherwise the extra reset will get cancelled anyway. remove_queue_mes forgot to check is_resetting flag compared to the pre-MES path unmap_queue_cpsch, so it did not block hw access during reset correctly. Signed-off-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Yunxiang Li authored
We send back the ready to reset message before we stop anything. This is wrong. Move it to when we are actually ready for the FLR to happen. In the current state since we take tens of seconds to stop everything, it is very likely that host would give up waiting and reset the GPU before we send ready, so it would be the same as before. But this gets rid of the hack with reset_domain locking and also let us tell how slow ready to reset actually is from the host. The ready to reset speed can be improved later. Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
-
Yunxiang Li authored
Accessing registers via host is missing the check for skip_hw_access and the lockdep check that comes with it. Signed-off-by:
-
Eric Huang authored
To fullfill the reset event description. Suggested-by:
Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by:
Eric Huang <jinhuieric.huang@amd.com> Reviewed-by:
-
Eric Huang authored
amdgpu_job_ring may return NULL, which causes kernel NULL pointer error, using another way to print ring name instead of ring->name. Suggested-by:
-
Aric Cyr authored
This version brings the following changes: - Add sequential ONO sequencing for DCN35 - Add new GPINT command definitions - reduce ODM slice count to initial new dc state only when needed - Enable copying of bounding box data from VBIOS DMUB - Guard reading 3DLUT registers for dcn32/dcn35 Reviewed-by:
Zaeem Mohamed <zaeem.mohamed@amd.com> Acked-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Sung Joon Kim authored
[why] There are other factors that determine the number of DSC slices. The slices should not be determined in DML but retrieve the value calculated from driver. [how] Update the logic to determine DSC slice. Make DSCDelay per display pipe. Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Sung Joon Kim <sungjoon.kim@amd.com> Tested-by:
-
Alex Hung authored
Two additional virtual links are created and thus increasing size for dc->links by two. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] 3DLUT is not part of the DPP on DCN32/DCN35 ASIC and these registers now exist in MCM state. [How] Add guards when reading DPP state based on whether the register has a valid offset. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Dillon Varone authored
- Ensure SubVP stream settings match ODM policy - Fix MALL size calculations when DCC is enabled - Fail if any stream fails DRR policy check Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
Alvin Lee authored
[Description] In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not already programmed at the time of PHY / DIG enable then the FW sequence will program an incorrect SYMCLK source. Ensure that we program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this particular case) before going through the PHY / DIG enable sequence. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
-
Jesse Zhang authored
Since the range of the varibable i is 0 - 3. So execution cannot reach this statement: default. Signed-off-by:
Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
-
Jesse Zhang authored
Since the range of align is 0~7, the expression is: align = (attr >> 3) & 7. In the case of ATOM_ARG_IMM, the code cannot reach the default case. So there is no need for "break". Signed-off-by:
-
ChunTao Tso authored
Add functions to defer updating of coasting vtotal after source refresh rate update. Reviewed-by:
Robin Chen <robin.chen@amd.com> Acked-by:
ChunTao Tso <chuntao.tso@amd.com> Tested-by:
-
Srinivasan Shanmugam authored
drm/amd/display: Add NULL check for 'afb' before dereferencing in amdgpu_dm_plane_handle_cursor_update This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 8379 static void amdgpu_dm_update_cursor(struct drm_plane *plane, 8380 struct drm_plane_state *old_plane_state, 8381 struct dc_stream_update *update) 8382 { 8383 struct amdgpu_device *adev = drm_to_adev(plane->dev); 8384 struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(plane->state->fb); 8385 struct drm_crtc *crtc = afb ? plane->state->crtc : old_plane_state->crtc; ^^^^^ 8386 struct dm_crtc_state *crtc_state = crtc ? to_dm_crtc_state(crtc->state) : NULL; 8387 struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); 8388 uint64_t address = afb ? afb->address : 0; ^^^^^ Checks for NULL 8389 struct dc_cursor_position position = {0}; 8390 struct dc_cursor_attributes attributes; 8391 int ret; 8392 8393 if (!plane->state->fb && !old_plane_state->fb) 8394 return; 8395 8396 drm_dbg_atomic(plane->dev, "crtc_id=%d with size %d to %d\n", 8397 amdgpu_crtc->crtc_id, plane->state->crtc_w, 8398 plane->state->crtc_h); 8399 8400 ret = amdgpu_dm_plane_get_cursor_position(plane, crtc, &position); 8401 if (ret) 8402 return; 8403 8404 if (!position.enable) { 8405 /* turn off cursor */ 8406 if (crtc_state && crtc_state->stream) { 8407 dc_stream_set_cursor_position(crtc_state->stream, 8408 &position); 8409 update->cursor_position = &crtc_state->stream->cursor_position; 8410 } 8411 return; 8412 } 8413 8414 amdgpu_crtc->cursor_width = plane->state->crtc_w; 8415 amdgpu_crtc->cursor_height = plane->state->crtc_h; 8416 8417 memset(&attributes, 0, sizeof(attributes)); 8418 attributes.address.high_part = upper_32_bits(address); 8419 attributes.address.low_part = lower_32_bits(address); 8420 attributes.width = plane->state->crtc_w; 8421 attributes.height = plane->state->crtc_h; 8422 attributes.color_format = CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA; 8423 attributes.rotation_angle = 0; 8424 attributes.attribute_flags.value = 0; 8425 8426 /* Enable cursor degamma ROM on DCN3+ for implicit sRGB degamma in DRM 8427 * legacy gamma setup. 8428 */ 8429 if (crtc_state->cm_is_degamma_srgb && 8430 adev->dm.dc->caps.color.dpp.gamma_corr) 8431 attributes.attribute_flags.bits.ENABLE_CURSOR_DEGAMMA = 1; 8432 --> 8433 attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0]; ^^^^^ ^^^^^ Unchecked dereferences 8434 8435 if (crtc_state->stream) { 8436 if (!dc_stream_set_cursor_attributes(crtc_state->stream, 8437 &attributes)) 8438 DRM_ERROR("DC failed to set cursor attributes\n"); 8439 8440 update->cursor_attributes = &crtc_state->stream->cursor_attributes; 8441 8442 if (!dc_stream_set_cursor_position(crtc_state->stream, 8443 &position)) 8444 DRM_ERROR("DC failed to set cursor position\n"); 8445 8446 update->cursor_position = &crtc_state->stream->cursor_position; 8447 } 8448 } Fixes: 66eba12a ("drm/amd/display: Do cursor programming with rest of pipe") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Lewis Huang authored
[Why] For some panel, it cannot handle pseudo vblank set by otg resync when leave psr [How] The monitor patch will keep otg_on during enter IPS1. And then we don't need to do otg resync when wake up. Reviewed-by:
Duncan Ma <duncan.ma@amd.com> Acked-by:
Lewis Huang <lewis.huang@amd.com> Tested-by:
-
Chiawen Huang authored
[How&Why] Once IPS active, all the DCN resources are not be allowed to access. It needs to a function for 3rd party to on/off IPS. Reviewed-by:
Chiawen Huang <chiawen.huang@amd.com> Tested-by:
-
Dillon Varone authored
[WHY&HOW] Add 5ms timeout to trigger recovery and force allow P-State in DMUB. Reviewed-by:
-
Dillon Varone authored
[WHY&HOW] UCLK and FCLK are updated together, so an FCLK update can also cause UCLK update to SMU. When this happens, the UCLK provided should be max if switching is unsupported. Reviewed-by:
-
Wayne Lin authored
[Why] enc10->base.features.flags.bits.DP_IS_USB_C will be overwritten if we set it before initializing enc10->base.features [How] Determine DP_IS_USB_C after enc10->base.features is initialized. Besides, bp_cap_info.DP_IS_USB_C will never be set in get_connector_speed_cap_info(). Remove the redudant code. Reviewed-by:
Roman Li <roman.li@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Tested-by:
-
Yihan Zhu authored
[WHY] OPPs couldn't disconnect from the ODM that cause the double buffer pending not being latched due to missing VUPDATE. [HOW] Moving memory blanking before OTG turn off to make sure double buffer latched correctly. Reviewed-by:
Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by:
Yihan Zhu <yihan.zhu@amd.com> Tested-by:
-
Alex Deucher authored
This mirrors what the driver does for older DCN generations. Should fix: [ 26.924055] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 [ 26.924060] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1022, name: modprobe [ 26.924063] preempt_count: 2, expected: 0 [ 26.924064] RCU nest depth: 0, expected: 0 [ 26.924066] Preemption disabled at: [ 26.924067] [<ffffffffc089e5e0>] dc_fpu_begin+0x30/0xd0 [amdgpu] [ 26.924322] CPU: 9 PID: 1022 Comm: modprobe Not tainted 6.8.0+ #20 [ 26.924325] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 26.924326] Call Trace: [ 26.924327] <TASK> [ 26.924329] dump_stack_lvl+0x37/0x50 [ 26.924333] ? dc_fpu_begin+0x30/0xd0 [amdgpu] [ 26.924589] dump_stack+0x10/0x20 [ 26.924592] __might_resched+0x16a/0x1c0 [ 26.924596] __might_sleep+0x42/0x70 [ 26.924598] __kmalloc_node_track_caller+0x2ad/0x4b0 [ 26.924601] ? dm_helpers_allocate_gpu_mem+0x12/0x20 [amdgpu] [ 26.924855] ? dcn401_update_bw_bounding_box+0x2a/0xf0 [amdgpu] [ 26.925122] kmemdup+0x20/0x50 [ 26.925124] ? kernel_fpu_begin_mask+0x6b/0xe0 [ 26.925127] ? kmemdup+0x20/0x50 [ 26.925129] dcn401_update_bw_bounding_box+0x2a/0xf0 [amdgpu] [ 26.925393] dc_create+0x311/0x670 [amdgpu] [ 26.925649] amdgpu_dm_init+0x2aa/0x1fa0 [amdgpu] [ 26.925903] ? irq_work_queue+0x38/0x50 [ 26.925907] ? vprintk_emit+0x1e7/0x270 [ 26.925910] ? dev_printk_emit+0x83/0xb0 [ 26.925914] ? amdgpu_device_rreg+0x17/0x20 [amdgpu] [ 26.926133] dm_hw_init+0x14/0x30 [amdgpu] v2: drop extra memcpy Fixes: 669d6b07 ("drm/amd/display: avoid large on-stack structures") Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Alex Deucher authored
This mirrors what the driver does for older DCN generations. Should fix: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 449, name: kworker/u64:8 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: ffffffffc0ce1580>] dc_fpu_begin+0x30/0xd0 [amdgpu] CPU: 5 PID: 449 Comm: kworker/u64:8 Tainted: G W 6.8.0+ #35 Hardware name: System manufacturer System Product Name/ROG STRIX X570-E GAMING WIFI II, BIOS 4204 02/24/2022 Workqueue: events_unbound async_run_entry_fn v2: drop extra memcpy Fixes: 88c61827 ("drm/amd/display: dynamically allocate dml2_configuration_options structures") Reviewed-by:
-
Frank Min authored
1. Add dcc buffer flag for copy buffer 2. Add sdma 7.0 support copy dcc buffer Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
Frank Min <Frank.Min@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Likun Gao authored
Deal with AMDGPU_GEM_CREATE_GFX12_DCC to set DCC bit when needed. Signed-off-by:
-
Alex Deucher authored
Add additional VM PTE bits. Reviewed-by:
-
Thorsten Blum authored
The if conditions !A || A && B can be simplified to !A || B. Fixes the following Coccinelle/coccicheck warnings reported by excluded_middle.cocci: WARNING !A || A && B is equivalent to !A || B WARNING !A || A && B is equivalent to !A || B WARNING !A || A && B is equivalent to !A || B Compile-tested only. Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by:
-
Jack Chang authored
1. To support multiple PSRSU residency measurement mode Reviewed-by:
Jack Chang <jack.chang@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] HPD sense changes can occur during low power states and need to be notified from firmware to driver. Upon notification the hotplug redetection routines should execute. [How] Add Support in DMUB srv and DMUB srv stat for receiving these notifications. DM can hook them up and process the HPD redetection once received. Reviewed-by:
-
- 05 Jun, 2024 7 commits
-
-
Tao Zhou authored
Set the flag to true if bad page number reaches threshold. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Jesse Zhang authored
Since gmc_pg is false, setting mcFlags with SISLANDS_SMC_MC_PG_EN cannot be reach. Signed-off-by:
-
Fangzhi Zuo authored
IPX involvment proven to affect LT, causing link loss. Need to prevent IPX enabled in LT process in which link detect and set mode are main procedures that have LT taken place. Reviewed-by:
Fangzhi Zuo <jerry.zuo@amd.com> Tested-by:
-
Jesse Zhang authored
idr_for_each_entry can ensure that mem is not empty during the loop. So don't need check mem again. Signed-off-by:
-
Lin.Cao authored
Flag "mes.ring.shced.ready" will be set as true after mes hw init and set as false when mes hw fini to avoid duplicate initialization. But hw fini will not be called when function level reset, which will cause mes hw init be skipped during FLR, which will leads to mapping legacy queue fail. Set this flag as false when post reset will fix this issue. Signed-off-by:
Lin.Cao <lincao12@amd.com> Acked-by:
-
Daniel Sa authored
[Why] When performing P-State switching with Subvp on 8k (downscaled to 4k). corruption can be seen on the screen. MALL data was not being fetched from DC, and the system things there is more MALL space then what is actually available. [How] Read MALL size from dc caps. Reviewed-by:
Daniel Sa <daniel.sa@amd.com> Tested-by:
-
