* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] Fix Kconfig
  [DLM] fix compile warning

Problem:
  sched_fork() has always called scheduler_tick() in some (unlikely)
  circumstances in order to update the current task in light of those
  circumstances.  It has always been the case that the work done by
  scheduler_tick() was more than was required to handle the problem in
  hand but no harm was done except for the waste of a few CPU cycles.

  However, the splitting of scheduler_tick() into two procedures in
  2.6.20-rc1 enables the wasted cycles to be saved as the new procedure
  task_running_tick() does all the work that is required to rectify the
  problem being handled.

Solution:
  Replace the call to scheduler_tick() in sched_fork() with a call to
  task_running_tick().
Signed-off-by: Peter Williams <pwil3058@bigpond.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

if CONFIG_CALGARY_IOMMU is built into the kernel via
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT, or is enabled via the
iommu=calgary boot option, then the detect_calgary() function runs to
detect the presence of a Calgary IOMMU.

detect_calgary() first searches the BIOS EBDA area for a "rio_table_hdr"
BIOS table. It has this parsing algorithm for the EBDA:

	while (offset) {
		...
		/* The next offset is stored in the 1st word. 0 means no more */
 		offset = *((unsigned short *)(ptr + offset));
	}

got that? Lets repeat it slowly: we've got a BIOS-supplied data
structure, plus Linux kernel code that will only break out of an
infinite parsing loop once the BIOS gives a zero offset. Ok?

Translation: what an excellent opportunity for BIOS writers to lock up
the Linux boot process in an utterly hard to debug place! Indeed the
BIOS jumped on that opportunity on my box, which has the following EBDA
chaining layout:

  384, 65282, 65535, 65535, 65535, 65535, 65535, 65535 ...

see the pattern? So my, definitely non-Calgary system happily locks up
in detect_calgary()!

the patch below fixes the boot hang by trusting the BIOS-supplied data
structure a bit less: the parser always has to make forward progress,
and if it doesnt, we break out of the loop and i get the expected kernel
message:

  Calgary: Unable to locate Rio Grande Table in EBDA - bailing!
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

one of my boxes didnt boot the 2.6.20-rc1-rt0 kernel rpm, it hung during
early bootup. After an hour or two of happy debugging i narrowed it down
to the CALGARY_IOMMU_ENABLED_BY_DEFAULT option, which was freshly added
to 2.6.20 via the x86_64 tree and /enabled by default/.

commit bff6547b claims:

    [PATCH] Calgary: allow compiling Calgary in but not using it by default

    This patch makes it possible to compile Calgary in but not use it by
    default. In this mode, use 'iommu=calgary' to activate it.

but the change does not actually practice it:

 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
        bool "Should Calgary be enabled by default?"
        default y
        depends on CALGARY_IOMMU
        help
          Should Calgary be enabled by default? if you choose 'y', Calgary
          will be used (if it exists). If you choose 'n', Calgary will not be
          used even if it exists. If you choose 'n' and would like to use
          Calgary anyway, pass 'iommu=calgary' on the kernel command line.
          If unsure, say Y.

it's both 'default y', and says "If unsure, say Y". Clearly not a typo.

disabling this option makes my box boot again. The patch below fixes the
Kconfig entry. Grumble.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

__set_irq_handler: Kill a bogus space
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] block: document io scheduler allow_merge_fn hook
  [PATCH] cfq-iosched: don't allow sync merges across queues
  [PATCH] Fixup blk_rq_unmap_user() API
  [PATCH] __blk_rq_unmap_user() fails to return error
  [PATCH] __blk_rq_map_user() doesn't need to grab the queue_lock
  [PATCH] Remove queue merging hooks
  [PATCH] ->nr_sectors and ->hard_nr_sectors are not used for BLOCK_PC requests
  [PATCH] cciss: fix XFER_READ/XFER_WRITE in do_cciss_request
  [PATCH] cciss: set default raid level when reading geometry fails

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] sata_svw, sata_vsc: kill iomem warnings
  [PATCH] libata: take scmd->cmd_len into account when translating SCSI commands
  [PATCH] libata: kill @cdb argument from xlat methods
  [PATCH] libata: clean up variable name usage in xlat related functions
  [libata] Move some PCI IDs from sata_nv to ahci
  [libata] pata_via: suspend/resume support fix
  [libata] pata_cs5530: suspend/resume support tweak

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  Driver core: proper prototype for drivers/base/init.c:driver_init()
  kobject: kobject_uevent() returns manageable value
  kref refcnt and false positives

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (22 commits)
  acpiphp: Link-time error for PCI Hotplug
  shpchp: cleanup shpchp.h
  shpchp: remove shpchprm_get_physical_slot_number
  shpchp: cleanup struct controller
  shpchp: remove unnecessary struct php_ctlr
  PCI: ATI sb600 sata quirk
  PCI legacy resource fix
  PCI: don't export device IDs to userspace
  PCI: Be a bit defensive in quirk_nvidia_ck804() so we don't risk dereferencing a NULL pdev.
  PCI: Fix multiple problems with VIA hardware
  PCI: Only check the HT capability bits in mpic.c
  PCI: Use pci_find_ht_capability() in drivers/pci/quirks.c
  PCI: Add #defines for Hypertransport MSI fields
  PCI: Use pci_find_ht_capability() in drivers/pci/htirq.c
  PCI: Add pci_find_ht_capability() for finding Hypertransport capabilities
  PCI: Create __pci_bus_find_cap_start() from __pci_bus_find_cap()
  pci: Introduce pci_find_present
  PCI: pcieport-driver: remove invalid warning message
  rpaphp: compiler warning cleanup
  PCI quirks: remove redundant check
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits)
  USB Storage: remove duplicate Nokia entry in unusual_devs.h
  [PATCH] bluetooth: add support for another Kensington dongle
  [PATCH] usb serial: add support for Novatel S720/U720 CDMA/EV-DO modems
  [PATCH] USB: Nokia E70 is an unusual device
  USB: fix to usbfs_snoop logging of user defined control urbs
  USB: at91_udc: Additional checks
  USB: at91_udc: Cleanup variables after failure in usb_gadget_register_driver()
  USB: at91_udc: allow drivers that support high speed
  USB: u132-hcd/ftdi-elan: add support for Option GT 3G Quad card
  USB: at91_udc, misc fixes
  USB: at91 udc, support at91sam926x addresses
  USB: OHCI support for PNX8550
  USB: ohci handles hardware faults during root port resets
  USB: ohci at91 warning fix
  USB: ohci whitespace/comment fixups
  USB: MAINTAINERS update, EHCI and OHCI
  USB: gadget driver unbind() is optional; section fixes; misc
  UHCI: module parameter to ignore overcurrent changes
  USB: Nokia E70 is an unusual device
  USB AUERSWALD: replace kmalloc+memset with kzalloc
  ...

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix register save area alignment for swapcontext syscall
  [POWERPC] Fix PCI device channel state initialization
  [POWERPC] Update MTD OF documentation
  [POWERPC] Probe Efika platform before CHRP.
  [POWERPC] Fix build of cell zImage.initrd
  [POWERPC] iSeries: fix CONFIG_VIOPATH dependency
  [POWERPC] iSeries: fix viocons init
  [POWERPC] iSeries: fix viocd init
  [POWERPC] iSeries: fix iseries_veth init
  [POWERPC] iSeries: fix viotape init
  [POWERPC] iSeries: fix viodasd init
  [POWERPC] Workaround oldworld OF bug with IRQs & P2P bridges
  [POWERPC] powerpc: add scanning of ebc bus to of_platform
  [POWERPC] spufs: fix assignment of node numbers
  [POWERPC] cell: Fix spufs with "new style" device-tree
  [POWERPC] cell: Enable spider workarounds on all PCI buses
  [POWERPC] cell: add forward struct declarations to spu.h
  [POWERPC] cell: update cell_defconfig

* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Stop defining pci_pretty_name
  drm: r128: comment aligment with drm git
  drm: make kernel context switch same as for drm git tree.
  drm: fixup comment header style
  drm: savage: compat fix from drm git.
  drm: Unify radeon offset checking.
  i915_vblank_tasklet: Try harder to avoid tearing.
  DRM: handle pci_enable_device failure
  drm: fix return value check

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (30 commits)
  [ALSA] version 1.0.14rc1
  [ALSA] ac97: Identify CMI9761 chips.
  [ALSA] ac97_codec - trivial fix for bit update functions
  [ALSA] snd-ca0106: Fix typos.
  [ALSA] snd-ca0106: Add new card variant.
  [ALSA] sound: fix PCM substream list
  [ALSA] sound: initialize rawmidi substream list
  [ALSA] snd_hda_intel 3stack mode for ASUS P5P-L2
  [ALSA] Remove IRQF_DISABLED for shared PCI irqs
  [ALSA] Fix invalid assignment of PCI revision
  [ALSA] Fix races in PCM OSS emulation
  [ALSA] hda-codec - fix typo in PCI IDs
  [ALSA] ac97 - Fix potential negative array index
  [ALSA] hda-codec - Verbose proc output for PCM parameters
  [ALSA] hda-codec - Fix detection of supported sample rates
  [ALSA] hda-codec - Fix model for ASUS V1j laptop
  [ALSA] sound/core/control.c: remove dead code
  [ALSA] hda-codec - Add model for HP q965
  [ALSA] pcm core: fix silence_start calculations
  [ALSA] hda-codec - Fix a typo
  ...

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (29 commits)
  [ARM] 4062/1: S3C24XX: Anubis and Osiris shuld have CONFIG_PM_SIMTEC
  [ARM] 4060/1: update several ARM defconfigs
  [ARM] 4061/1: xsc3: change of maintainer
  [ARM] 4059/1: VR1000: fix LED3's platform device number
  [ARM] 4022/1: iop13xx: generic irq fixups
  [ARM] 4015/1: s3c2410 cpu ifdefs
  [ARM] 4057/1: ixp23xx: unconditionally enable hardware coherency
  [ARM] 4056/1: iop13xx: fix resource.end off-by-one in flash setup
  [ARM] 4055/1: iop13xx: fix phys_io/io_pg_offst for iq81340mc/sc
  [ARM] 4054/1: ep93xx: add HWCAP_CRUNCH
  [ARM] 4052/1: S3C24XX: Fix PM in arch/arm/mach-s3c2410/Kconfig
  [ARM] Fix warnings from asm/system.h
  [ARM] 4051/1: S3C24XX: clean includes in S3C2440 and S3C2442 support
  [ARM] 4050/1: S3C24XX: remove old changelogs in arch/arm/mach-s3c2410
  [ARM] 4049/1: S3C24XX: fix sparse warning due to upf_t in regs-serial.h
  [ARM] 4048/1: S3C24XX: make s3c2410_pm_resume() static
  [ARM] 4046/1: S3C24XX: fix sparse errors arch/arm/mach-s3c2410
  [ARM] 4045/1: S3C24XX: remove old VA for non-shared areas
  [ARM] 4044/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2442-clock.c
  [ARM] 4043/1: S3C24XX: fix sparse warnings in arch/arm/mach-s3c2410/s3c2440-clock.c
  ...

How many times are we going to merge this entry...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that iomap merge is close to reality, and since the warnings and
issue have been around so long, we don't need a reminder on every build
that libata needs to be converted over to iomap.
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add the stupid sco fixup quirk to yet another Broadcom/Kensington device.

Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add USB vendor/device IDs for Novatel Wireless S720 and U720 CDMA/EV-DO
modems to airprime.c.
Signed-off-by: Eric Smith <eric@brouhaha.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7508

When the Nokia E70 Phone is plugged in to the USB port, I get:

end_request: I/O error, dev sda, sector 1824527
sd 0:0:0:0: SCSI error: return code = 0x10070000
end_request: I/O error, dev sda, sector 1824535
sd 0:0:0:0: SCSI error: return code = 0x10070000

The fix is to add these lines to drivers/usb/storage/unusual_devs.h:

Cc: <honkkis@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

libata depended on SCSI command to have the correct length when
tranlating it into an ATA command.  This generally worked for commands
issued by SCSI HLD but user could issue arbitrary broken command using
sg interface.

Also, when building ATAPI command, full command size was always
copied.  Because some ATAPI devices needs bytes after CDB cleared, if
upper layer doesn't clear bytes after CDB, such devices will
malfunction.  This necessiated recent clear-garbage-after-CDB fix in
sg interfaces.  However, scsi_execute() isn't fixed yet and HL-DT-ST
DVD-RAM GSA-H30N malfunctions on initialization commands issued from
SCSI.

This patch makes xlat functions always consider SCSI cmd_len.  Each
translation function checks for proper cmd_len and ATAPI translaation
clears bytes after CDB.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Douglas Gilbert <dougg@torque.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

xlat function will be updated to consider qc->scsicmd->cmd_len and
many xlat functions deference qc->scsicmd already.  It doesn't make
sense to pass qc->scsicmd->cmnd as @cdb separately.  Kill the
argument.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Variable names in xlat functions are quite confusing now.  'scsicmd'
is used for CDB while qc->scsicmd points to struct scsi_cmnd while
'cmd' is used for struct scsi_cmnd.

This patch cleans up variable names in xlat functions such that 'scmd'
is used for struct scsi_cmnd and 'cdb' for CDB.  Also, 'scmd' local
variable is added if qc->scsicmd is used multiple times.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The content of memory map io of BAR5 have been change from MCP65 then
sata_nv can't work fine on the platform based on MCP65 and MCP67, so move
their IDs from sata_nv.c to ahci.c.
Signed-off-by: Peer Chen <pchen@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add a prototype for driver_init() in include/linux/device.h.

Also remove a static function of the same name in drivers/acpi/ibm_acpi.c to
ibm_acpi_driver_init() to fix the namespace collision.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Since kobject_uevent() function does not return an integer value to
indicate if its operation was completed with success or not, it is worth
changing it in order to report a proper status (success or error) instead
of returning void.

[randy.dunlap@oracle.com: Fix inline kobject functions]
Cc: Mauricio Lin <mauriciolin@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

With WARN_ON addition to kobject_init()
[ http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.19/2.6.19-mm1/dont-use/broken-out/gregkh-driver-kobject-warn.patch ]

I started seeing following WARNING on CPU offline followed by online on my
x86_64 system.

WARNING at lib/kobject.c:172 kobject_init()

Call Trace:
 [<ffffffff8020ab45>] dump_trace+0xaa/0x3ef
 [<ffffffff8020aec4>] show_trace+0x3a/0x50
 [<ffffffff8020b0f6>] dump_stack+0x15/0x17
 [<ffffffff80350abc>] kobject_init+0x3f/0x8a
 [<ffffffff80350be1>] kobject_register+0x1a/0x3e
 [<ffffffff803bbd89>] sysdev_register+0x5b/0xf9
 [<ffffffff80211d0b>] mce_create_device+0x77/0xf4
 [<ffffffff80211dc2>] mce_cpu_callback+0x3a/0xe5
 [<ffffffff805632fd>] notifier_call_chain+0x26/0x3b
 [<ffffffff8023f6f3>] raw_notifier_call_chain+0x9/0xb
 [<ffffffff802519bf>] _cpu_up+0xb4/0xdc
 [<ffffffff80251a12>] cpu_up+0x2b/0x42
 [<ffffffff803bef00>] store_online+0x4a/0x72
 [<ffffffff803bb6ce>] sysdev_store+0x24/0x26
 [<ffffffff802baaa2>] sysfs_write_file+0xcf/0xfc
 [<ffffffff8027fc6f>] vfs_write+0xae/0x154
 [<ffffffff80280418>] sys_write+0x47/0x6f
 [<ffffffff8020963e>] system_call+0x7e/0x83
DWARF2 unwinder stuck at system_call+0x7e/0x83
Leftover inexact backtrace:

This is a false positive as mce.c is unregistering/registering sysfs
interfaces cleanly on hotplug.

kref_put() and conditional decrement of refcnt seems to be the root cause
for this and the patch below resolves the issue for me.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

	I'm seeing:
 `acpiphp_glue_exit' referenced in section `.init.text' of
drivers/built-in.o: defined in discarded section `.exit.text' of
drivers/built-in.o

when trying to compile an IA64 kernel with PCI hotplug enabled.

I suggest this patch:
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch cleans up shpchp.h.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes unnecessary shpchprm_get_physical_slot_number()
function.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes unused/unnecessary members from struct controller.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The struct php_ctlr seems to be only for complicating codes. This
patch removes struct php_ctlr and related codes.
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Since commit 368c73d4 the kernel will try
to update the non-writeable BAR registers 0..3 of PIIX4 IDE adapters if
pci_assign_unassigned_resources() is used to do full resource assignment of
the bus.  This fails because in the PIIX4 these BAR registers have
implicitly assumed values and read back as zero; it used to work because
the kernel used to just write zero to that register the read back value did
match what was written.

The fix is a new resource flag IORESOURCE_PCI_FIXED used to mark a resource
as non-movable.  This will also be useful to keep other import system
resources from being moved around - for example system consoles on PCI
busses.

[akpm@osdl.org: cleanup]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I don't see any good reason for exporting device IDs to userspace.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

pci_get_slot() may return NULL if nothing was found.  quirk_nvidia_ck804()
does not check the value returned from pci_get_slot(), so it may end up
causing a NULL pointer deref.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch is designed to fix:
- Disk eating corruptor on KT7 after resume from RAM
- VIA IRQ handling
- VIA fixups for bus lockups after resume from RAM

The core of this is to add a table of resume fixups run at resume time.
We need to do this for a variety of boards and features, but particularly
we need to do this to get various critical VIA fixups done on resume.

The second part of the problem is to handle VIA IRQ number rules which
are a bit odd and need special handling for PIC interrupts. Various
patches broke various boxes and while this one may not be perfect
(hopefully it is) it ensures the workaround is applied to the right
devices only.

From: Jean Delvare <khali@linux-fr.org>

Now that PCI quirks are replayed on software resume, we can safely
re-enable the Asus SMBus unhiding quirk even when software suspend support
is enabled.

[akpm@osdl.org: fix const warning]
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Only compare the exact HT capability bits against HT_CAPTYPE_IRQ,
this is a little paranoid, but doesn't hurt.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use pci_find_ht_capability() in drivers/pci/quirks.c.

I'm pretty sure the logic is unchanged here, but someone please eye-ball it
for me. I've changed the message to be a little shorter, it's now:

PCI: Found (enabled|disabled) HT MSI mapping on xxxx:xx:xx.x
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add a few #defines for grabbing and working with the address fields
in a HT_CAPTYPE_MSI_MAPPING capability. All from the HT spec v3.00.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Use pci_find_ht_capability() in drivers/pci/htirq.c
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>