- 30 Mar, 2023 40 commits
-
-
Gregory Greenman authored
It has to be done per link. We still don't support keys configuration for several links, but the single vif link can still point to a link different from deflink. For now handle the removal of keys for the default link. Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100039.19d729cc4654.I4ebe8e3eb5fc00a994761f7c0ad40107382705ca@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
We're hitting these while starting to enable MLO in the driver, but getting them each and every time isn't very useful one way or the other. Make these warnings trigger only once. Signed-off-by:
-
Johannes Berg authored
Iterate all the links here and check which ones are active, then adjust them accordingly. This is still wrong as far as the RSSI event is concerned (calling iwl_mvm_bt_coex_enable_rssi_event) since we call that now multiple times, which could overwrite the data; we need to either make that per link or call it only once, but need to sort out first what the firmware will be doing for beacon filtering/beacon abort in MLO. Signed-off-by:
-
Johannes Berg authored
This is more of a workaround, with MLO we can get here with the deflink not assigned. It's not critical right now that we have this right, so WARN_ON_ONCE() and don't crash until we can fix this area of the code. Signed-off-by:
-
Johannes Berg authored
For now we only support a single link, so just use the deflink's address for the link address, instead of the STA's (MLD) address, but use the link address anyway in order to facilitate MLO connections. Signed-off-by:
-
Johannes Berg authored
For now, if using MLO, skip the MEI update. It probably needs new API for multiple channels. Signed-off-by:
-
Johannes Berg authored
This needs to apply to the link, not deflink. Signed-off-by:
-
Johannes Berg authored
With newer MLD firmware API we no longer need beacon timing information from the host, so disable TIMING_BEACON_ONLY. If MLO is enabled (currently only for testing), then we must not have DEAUTH_NEED_MGD_TX_PREP because mac80211 doesn't support it yet, we'll have to fix that later. Signed-off-by:
-
Johannes Berg authored
Implement the link change ops for links and stations. Note that the stations one is empty for now as we only have support for a single link so far, and then the stations are created with the first link as deflink by mac80211, so right now we don't really need anything. Signed-off-by:
-
Gregory Greenman authored
Clean up data for all allocated links of a vif. Invalidate all link sta pointers. Signed-off-by:
-
Gregory Greenman authored
Move code handling specific state transitions into separate handlers and adjust them for MLO. Adjust relevant callbacks as well. Signed-off-by:
-
Gregory Greenman authored
vif->bss_conf is used in this function only when TLC is not offloaded, so not in MLO flow. Simplify the related "if" condition and call iwl_mvm_hwrate_to_tx_status() only for driver rate scale. Signed-off-by:
-
Gregory Greenman authored
Pass link_conf when it's necessary and change the code accordingly. Signed-off-by:
-
Gregory Greenman authored
Driver uses link_id as an index in the array. FW currently can support only 2 concurrently active links per vif with the ids in the range 0-3. Add a mapping of dirver link ids to fw link id and track the number of active link ids. Signed-off-by:
-
Gregory Greenman authored
Internal stations are mcast/bcast and sniffer. They need some link specific data like bss id/phy id. Add link_conf as a parameter. Signed-off-by:
-
Gregory Greenman authored
These are two new handlers for MLO. As the configurations done in bss_info_changed() are now split into two separate flows, use MLO specific implementation instead of common functions with the non-MLO code. Signed-off-by:
-
Gregory Greenman authored
Add link_conf parameter and change all the relevant calls accordingly. Signed-off-by:
-
Johannes Berg authored
In newer firmware APIs the firmware is responsible for tracking the DTIM period and other beacon timing, so we don't need to wait with setting associated. In real MLO operation, mac80211 isn't tracking this anyway, and connections wouldn't work. Signed-off-by:
-
Gregory Greenman authored
Configure SMPS per-link. Add link_id parameter to iwl_mvm_update_smps() and refactor iwl_mvm_intf_dual_chain_req() since it has to handle all active links. Signed-off-by:
-
Avraham Stern authored
In mld ops, set_hw_timestamp was not set. Fix it. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
-
Johannes Berg authored
The firmware now allows adding a link that's not yet bound to a PHY context. Make use of that to align the driver with mac80211's API expectations. For now, just add the link at the same time as the MAC since we don't yet have real MLD support, but that'll obviously change later. This fixes an issue with apStaId tracking in the firmware. Signed-off-by:
-
Gregory Greenman authored
When using mvm vif PS/PM related properties, consider all links. Signed-off-by:
-
Gregory Greenman authored
HE/EHT support is reported to FW if there's at least one link that supports it. Configure beacon separately for each link. Don't send the beacon template before adding the MAC. Co-developed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Gregory Greenman authored
Consider properties of all available links for smart FIFO configuration. Signed-off-by:
-
Miri Korenblit authored
The LINK cmd host api has been updated. Align the driver to the new changes. Also, temporary use mac_id for link_id. Using the phy_id as the link_id is wrong since we might have 2 macs operating on the same phy - in this case we will have 2 different links (one for each mac) with the same link_id. On the other hand, since we don't have MLO implemented yet, we won't have 2 different links of the same mac. Therefore, we can use the mac_id as the link_id. Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
-
Miri Korenblit authored
Currently we're setting the sta->addr as the peers address only if the iftype is NL80211_IFTYPE_AP, otherwise we are setting the bssid to be the addr. This causes bugs in TDLS. Fix this by always using the sta->addr. Signed-off-by:
-
Miri Korenblit authored
During CSA the PHY used by the link is changing, So the driver needs to modify the links phy to the FW. Currently the driver is doing it by removing the link and adding a new one with the new phy_id, but the FW expects the link only to be modified. Fix this by modifying the links phy_id instead of removing it and adding a new one Signed-off-by:
-
Miri Korenblit authored
The patch linked below fixes the crash on queue removal bug only for the non-MLD API. Do the same for the MLD API. Fixes: c5a976cf ("wifi: iwlwifi: modify new queue allocation command") Signed-off-by:
-
Miri Korenblit authored
This bitmap indicates what fields of the cmd got changed. A field will be ignored by the FW if the corresponding flag wasn't set. There are a few cases in which we currently set the wrong bits when sending this cmd, which caused FW asserts. Fix this by setting the correct bits in each case. Fixes: 1ab26632 ("wifi: iwlwifi: mvm: Add an add_interface() callback for mld mode") Signed-off-by:
-
Miri Korenblit authored
Add all the callbacks that are not changing with the new MLD API and register to mac80211 with the new ops. Signed-off-by:
-
Miri Korenblit authored
Adjust the existing iwl_mvm_post_channel_switch() to the new MLD API and use it in the new MLD ieee80211_ops Signed-off-by:
-
Miri Korenblit authored
These flows are the same in both MLD API and the current API, except for the commands that are being sent during this flows. Instead of checking each time before calling these floews what API we use and then call the correct function, call always the old one, which in turn will call the new one in case we're using the MLD API. Signed-off-by:
-
Miri Korenblit authored
Add an MLD version of the remain_on_channel and cancel_remain_on_channel callbacks. Signed-off-by:
-
Miri Korenblit authored
This flow is almost the same for both MLD and non-MLD modes, except for some function calls. Therefore there is no reason to add an MLD version of this flow. Instead - put the parts that are unique for each mode in helper functions, and in the next patch each version of this flow will call the common part with pointers to its specific helper functions. Signed-off-by:
-
Miri Korenblit authored
Add MLD version of bss_info_changed/switch_vif_chanctx/ config_iface_filter and conf_tx() callbacks. Signed-off-by:
-
Miri Korenblit authored
In MLD mode we have a new STA cmd. As a result, it is also changes the flows of adding/updating/removing and handling state of a station. Add these flows. Signed-off-by:
-
Miri Korenblit authored
WE can't mix between the new MLD API and the old API. I.e. - we can't send one of the new cmds and then one of the old ones. This will cause a FW assert. So we need an indication what API should be used. We use the new API if: 1. FW supports it 2. We are registered to mac80211 with the new MLD ops Add an indication which will only be true if both conditions are true. Signed-off-by:
-
Gregory Greenman authored
Split iwl_mvm_sta into general and link specific parts. As a first step, all link dependent parameters reside in deflink. The change was done mostly using the spatch below with some manual adjustments. @iwl_mvm_sta@ struct iwl_mvm_sta *s; identifier var = {sta_id, lq_sta, avg_energy}; @@ ( s-> - var + deflink.var ) Signed-off-by: -
Gregory Greenman authored
In MLO, some fields of iwl_mvm_vif should be defined in the context of a link. Define a separate structure for these fields and add a deflink object to hold it as part of iwl_mvm_vif. Non-MLO legacy code will use only deflink object while MLO related code will use the corresponding link from the link array. It follows the strategy applied in mac80211 for introducing MLO changes. The below spatch takes care of updating all driver code to access fields separated into MLD specific data structure via deflink (need to convert all references to the fields listed in var to deflink.var and also to take care of calls like iwl_mvm_vif_from_mac80211(vif)->field). @iwl_mld_vif@ struct iwl_mvm_vif *v; struct ieee80211_vif *vv; identifier fn; identifier var = {bssid, ap_sta_id, bcast_sta, mcast_sta, beacon_stats, smps_requests, probe_resp_data, he_ru_2mhz_block, cab_queue, phy_ctxt, queue_params}; @@ ( v-> - var + deflink.var | fn(vv)-> - var + deflink.var ) Signed-off-by: -
Kieran Frewen authored
Include S1G capabilities in netlink band info messages. Signed-off-by:
Kieran Frewen <kieran.frewen@morsemicro.com> Co-developed-by:
Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Signed-off-by:
-
