- 26 Oct, 2019 1 commit
-
-
Chris Wilson authored
Avoid angering clang and smatch by using a constant value in a '&&' test, by forcing that constant value into a boolean. E.g., drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c:159:13: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!delay && CONFIG_DRM_I915_PREEMPT_TIMEOUT) { ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025135943.12524-1-chris@chris-wilson.co.uk
-
- 25 Oct, 2019 23 commits
-
-
José Roberto de Souza authored
This sequence was recently added to fix internal HW sequences to reset TC ports. HSDES: 1507287614 HSDES: 14010071447 BSpec: 49292 Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191021223408.87344-1-jose.souza@intel.com
-
Chris Wilson authored
As the GT may be running in parallel with the module initialisation code, we may enter i915_pmu_gt_parked() as we are executing i915_pmu_register(). We have to init the spinlock before we mark pmu.event_init so that it is available for use by i915_pmu_gt_parked() (which may run as soon as event_init is set). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112127Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025165442.23356-1-chris@chris-wilson.co.uk
-
Matthew Auld authored
We can be more aggressive in our testing by launching a number of kthreads, where each is submitting its own copy or fill batches on a set of random sized objects. Also since the underlying fill and copy batches can be pre-empted mid-batch(for particularly large objects), throw in a random mixture of ctx priorities per thread to make pre-emption a possibility. Signed-off-by:
-
Matthew Auld authored
Now that for all the relevant backends we do randomised testing, we need to make sure we still sanity check the obvious cases that might blow up, such that introducing a temporary regression is less likely. Also rather than do this for every backend, just limit to our two memory types: system and local. Suggested-by:
-
Matthew Auld authored
Ditch the dubious static list of sizes to enumerate, in favour of choosing a random size within the limits of each backing store. With repeated CI runs this should give us a wider range of object sizes, and in turn more page-size combinations, while using less machine time. Signed-off-by:
-
Matthew Auld authored
Add LMEM objects to list of backends we test for huge-GTT-pages. Signed-off-by:
-
Matthew Auld authored
Simple test writing to dwords across an object, using various engines in a randomized order, checking that our writes land from the cpu. Signed-off-by:
-
Abdiel Janulgue authored
We can create LMEM objects, but we also need to support mapping them into kernel space for internal use. Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by:
Steve Hampson <steven.t.hampson@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
-
Abdiel Janulgue authored
Create an io-mapping to describe the CPU aperture for lmem. Signed-off-by:
-
Matthew Auld authored
We currently define LMEM, or local memory, as just another memory region, like system memory or stolen, which we can expose to userspace and can be mapped to the CPU via some BAR. Signed-off-by:
-
Lucas De Marchi authored
Split gen11_irq_handler() to receive as parameter the function pointers. This allows to share the interrupt handler even if the enable/disable functions are different. Make sure it's always inlined to avoid the extra indirect call on the hot path. Checking with gcc 9 this produce the exact same code as of now: $ size drivers/gpu/drm/i915/i915_irq*.o text data bss dec hex filename 47511 560 0 48071 bbc7 drivers/gpu/drm/i915/i915_irq.o 47511 560 0 48071 bbc7 drivers/gpu/drm/i915/i915_irq_new.o $ gdb -batch -ex 'file drivers/gpu/drm/i915/i915_irq.o' -ex 'disassemble gen11_irq_handler' > /tmp/old.s $ gdb -batch -ex 'file drivers/gpu/drm/i915/i915_irq_new.o' -ex 'disassemble gen11_irq_handler' > /tmp/new.s $ git diff --no-index /tmp/{old,new}.s $ So, no change in behavior, just a simple refactor. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: -
Lucas De Marchi authored
On dgfx there's no LLC and eDRAM control table. Since now this also means the device has global MOCS, just return early on the initialization function. L3 settings still apply and still need to be tweaked. Bspec: 45101 Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191024195122.22877-3-lucas.demarchi@intel.com
-
Stuart Summers authored
Add a new macro for GEN12 platforms to be grouped under dgfx feature set. Signed-off-by:
Stuart Summers <stuart.summers@intel.com> Signed-off-by:
-
José Roberto de Souza authored
This will be helpful to diferentiate a set of GPUs with the same GEN version. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191024195122.22877-1-lucas.demarchi@intel.com
-
Lionel Landwerlin authored
TGL introduced a feature in which we map the main surface to the auxiliary surface. If we screw up the page tables, the HW has a register to tell us which engine encounters a fault in the page table walk. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Acked-by:
-
Ville Syrjälä authored
The change to skip the PCH reference initialization during fastboot did end up breaking FDI. To fix that let's try to do the PCH reference init whenever we're disabling a DPLL that was using said reference previously. Cc: stable@vger.kernel.org Tested-by:
Andrija <akijo97@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112084 Fixes: b16c7ed9 ("drm/i915: Do not touch the PCH SSC reference if a PLL is using it") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022185643.1483-1-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Chris Wilson authored
The parallel switch test has an underlying assumption that its requests are executed in order of submission, which is only true if the backend manages to keep up. Ensure the order of execution matches the submission order by explicit dependencies and so when we wait on the last request, we know we wait on completion of the entire queue. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191016225730.29447-1-chris@chris-wilson.co.uk
-
Tvrtko Ursulin authored
Intel_lrc.c is the only caller and so to avoid some header file ordering issues in future patches move these two over there. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Anna Karas authored
Replace PLLs names used in documentation to that used in the code. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Fixes: 68ff39c3 ("drm/i915/tgl: Add new pll ids") Signed-off-by:
Anna Karas <anna.karas@intel.com> Reviewed-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Anna Karas authored
Add description of wakeref member of intel_shared_dpll structure to documentation. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
-
Anna Karas authored
Update header files containing i915_perf_stream, i915_perf_stream_ops and i915_oa_ops definitions since they have been moved from i915_drv.h to i915_perf_types.h. Cc: Robert Bragg <robert@sixbynine.org> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Chris Wilson authored
BAT is growing a little fat and CI is under pressure and needs to trim off some redundant runtime. An easy option is to reduce the selftest runtimes, so try halving our default subtest timeout. While this reduces the number of iterations used, for the majority of tests that are passing, repeat runs (with different CI_DRM) will make up the difference -- a negative consequence though is that we may reduce the frequency of sporadic failures. Hopefully, we have no tests that were crucially dependent on the previous 1s timeout... Suggested-by:
Tomi Sarvela <tomi.p.sarvela@intel.com> Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191025092749.13468-1-chris@chris-wilson.co.uk
-
José Roberto de Souza authored
Right now if sink reported any PSR error or if it fails to acknowledge the PSR wakeup it sets a flag and do not attempt to enable PSR anymore. That is the safest approach to avoid repetitive glitches and allowed us to have PSR enabled by default. But from time to time even good PSR panels have a PSR error, causing tests to fail. And for now we are not yet to the point were we could try to recover from PSR errors, so lets add this information to the debugfs so IGT can check if PSR is disabled because of sink errors or not and eliminate this noise from CI runs. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ap Kamal <kamal.ap@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191023214932.94679-1-jose.souza@intel.com
-
- 24 Oct, 2019 16 commits
-
-
Matt Roper authored
Gen11+ has more hardware planes than gen9 so we need to test additional pipe interrupt register bits to recognize any GTT faults that happen on these extra planes. Bspec: 50335 Signed-off-by:
-
Tapani Pälli authored
As with commit 3fe0107e, this change fixes multiple tests that are using the invocation counts. Documentation doesn't list the workaround for TGL but applying it fixes the tests. Signed-off-by:
Tapani Pälli <tapani.palli@intel.com> Acked-by:
-
Mika Kuoppala authored
On testing the whitelists, using any of the nonpriv flags when trying to access the register offset will lead to failure. Define address mask to get the mmio offset in order to guard against any current and future flag usage. v2: apply also on scrub_whitelisted_registers (Lionel) Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
-
Ap Kamal authored
'Link CRC error' will now have same error level as other PSR2 errors like 'RFB storage error' and 'VSC SDP uncorrectable error'. Signed-off-by:
Ap Kamal <kamal.ap@intel.com> Reviewed-by:
-
Ville Syrjälä authored
snb supports fp16 pixel formats on the sprite planes. Expose that capability. Nothing special needs to be done, it just works. v2: Rebase on top of icl fp16 Split snb+ sprite bits into a separate patch Reviewed-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
ivb+ supports fp16 pixel formats on the sprite planes planes. Expose that capability. On ivb/hsw fp16 scanout is slightly busted. The output from the plane will have 1/4 the expected value. For the sprite plane we can fix that up with the plane gamma unit. This was fixed on bdw. v2: Rebase on top of icl fp16 Split the ivb+ sprite birs into a separate patch v3: Move ivb_need_sprite_gamma() check one level up so that we don't waste time programming garbage into he gamma registers Reviewed-by: -
Ville Syrjälä authored
gen4+ supports fp16 pixel formats on the primary planes. Add the relevant code. On ivb fp16 scanout is slightly busted. The output from the plane will have 1/4 the expected value. For the primary plane we would have to use the pipe gamma or pipe csc to correct that which would affect all the other planes as well, hence we simply choose not to expose fp16 on the ivb primary plane. On hsw the primary plane got fixed. On gmch platforms I observed that the plane width must be below 2k pixels with fp16 or else we get a corrupted image. This limitation does not seem to be documented in bspec. I verified the exact limit using the chv pipe B primary plane since it has windowing capability. The stride limits are unaffected by fp16. v2: Rebase on top of icl fp16 Split thea gen4+ primary plane bits into a separate patch Deal with HAS_GMCH() Reviewed-by: -
Ville Syrjälä authored
skl+ supports fp16 pixel formats on all universal planes. Add the necessary bits to expose that capability. The main different to icl is that we can't scale fp16, so need to add the relevant checks. v2: Rebase on top of icl fp16 Split skl+ bits into a separate patch Reviewed-by: -
Ville Syrjälä authored
Now that the planes declare their minimum cdclk requirements properly we don't need to check the cdclk in skl_max_scale() anymore. Just check against the maximum downscale ratio, and move the code next to it's only caller. v2: Add a comment explaining the HQ vs. not thing Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
The normal cdclk handling now takes care of making sure the plane's pixel rate doesn't exceed the spec appointed percentage of the cdclk frequency. Thus we can nuke skl_check_pipe_max_pixel_rate(). Reviewed-by:
-
Ville Syrjälä authored
Various pixel formats and plane scaling impose additional constraints on the cdclk frequency. Provide a new plane->min_cdclk() hook that will be used to compute the minimum acceptable cdclk frequency for each plane. Annoyingly on some platforms the numer of active planes affects this calculation so we must also toss in more planes into the state when the number of active planes changes. The sequence of state computation must also be changed: 1. check_plane() (updates plane's visibility etc.) 2. figure out if more planes now require update min_cdclk computaion 3. calculate the new min cdclk for each plane in the state 4. if the minimum of any plane now exceeds the current logical cdclk we recompute the cdclk 4. during cdclk computation take the planes' min_cdclk into accoutn 5. follow the normal cdclk programming to change the cdclk frequency. This may now require a modeset (except on bxt/glk in some cases), which either succeeds or fails depending on whether userspace has given us permission to perform a modeset or not. v2: Fix plane id check in intel_crtc_add_planes_to_state() Only print the debug message when cdclk needs bumping Use dev_priv->cdclk... as the old state explicitly Reviewed-by: -
Ville Syrjälä authored
check_digital_port_conflicts() is done needlessly late. Move it earlier. This will be needed as later on we want to set any_ms=true a bit later for non-modesets too and we can't call this guy without the connection_mutex held. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
So far we've sort of protected the global state under dev_priv with the connection_mutex. I wan to change that so that we can change the cdclk even for pure plane updates. To that end let's formalize the protection of the global state to follow what I started with the cdclk code already (though not entirely properly) such that any crtc mutex will suffice as a read lock, and all crtcs mutexes act as the write lock. We'll also pimp intel_atomic_state_clear() to clear the entire global state, so that we don't accidentally leak stale information between the locking retries. As a slight optimization we'll only lock the crtc mutexes to protect the global state, however if and when we actually have to poke the hw (eg. if the actual cdclk changes) we must serialize commits across all crtcs so that a parallel nonblocking commit can't get ahead of the cdclk reprogamming. We do that by adding all crtcs to the state. TODO: the old global state examined during commit may still be a problem since it always looks at the _latest_ swapped state in dev_priv. Need to add proper old/new state for that too I think. v2: Remeber to serialize the commits if necessary Signed-off-by:
-
Ville Syrjälä authored
To make the logs a bit less confusing let's toss in some debug prints to indicate whether the cdclk reprogramming is going to happen with a single pipe active or whether we need to turn all pipes off for the duration. Signed-off-by:
-
Anna Karas authored
Add missing descriptions of i915_perf_stream structure members to documentation. Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Robert Bragg <robert@sixbynine.org> Signed-off-by:
-
Chris Wilson authored
Split the legacy submission backend from the common CS ring buffer handling. Signed-off-by:
-
