1. 08 Apr, 2013 14 commits
  2. 02 Apr, 2013 20 commits
  3. 01 Apr, 2013 5 commits
    • Rajendra Nayak's avatar
      ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass · 469d633d
      Rajendra Nayak authored
      omap3_noncore_dpll_set_rate() attempts an enable of bypass clk as well
      as ref clk for every .set_rate attempt on a noncore DPLL, regardless of
      whether the .set_rate results in the DPLL being locked or put in bypass.
      Early at boot, while some of these DPLLs are programmed and locked
      (using .set_rate for the DPLL), this causes an ordering issue.
      
      For instance, on OMAP5, the USB DPLL derives its bypass clk from ABE DPLL.
      If a .set_rate of USB DPLL which programmes the M,N and locks it is called
      before the one for ABE, the enable of USB bypass clk (derived from ABE DPLL)
      then attempts to lock the ABE DPLL and fails as the M,N values for ABE
      are yet to be programmed.
      
      To get rid of this ordering needs, enable bypass clk for a DPLL as part
      of its .set_rate only when its being put in bypass, and only enable the
      ref clk when its locked.
      Reported-by: default avatarRoger Quadros <rogerq@ti.com>
      Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      469d633d
    • Paul Walmsley's avatar
      ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0 · bd70f6eb
      Paul Walmsley authored
      _pwrdm_save_clkdm_state_and_activate() tried to test one of its
      unsigned arguments to determine whether it was less than zero.  Fix by
      moving the error test to the caller.
      Reported-by: default avatarChen Gang <gang.chen@asianux.com>
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      bd70f6eb
    • Rajendra Nayak's avatar
      ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag · 4280943b
      Rajendra Nayak authored
      _HWMOD_WAKEUP_ENABLED is currently unused across the hwmod
      framework. Just get rid of it, so we have one less flag to
      worry about.
      Tested-by: default avatarVaibhav Bedia <vaibhav.bedia@ti.com>
      Signed-off-by: default avatarRajendra Nayak <rnayak@ti.com>
      Signed-off-by: default avatarSantosh Shilimkar <santosh.shilimkar@ti.com>
      Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
      4280943b
    • Vaibhav Hiremath's avatar
      ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk · da91b89e
      Vaibhav Hiremath authored
      WDT1 module can take one of the below clocks as input functional
      clock -
           - On-Chip 32K RC Osc [default/reset]
           - 32K from PRCM
      
      The On-Chip 32K RC Osc clock is not an accurate clock-source as per
      the design/spec, so as a result, for example, timer which supposed
      to get expired @60Sec, but will expire somewhere ~@40Sec, which is
      not expected by any use-case.
      
      The solution here is to switch the input clock-source to PRCM
      generated 32K clock-source during boot-time itself.
      Signed-off-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
      Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
      Cc: Benoit Cousson <benoit.cousson@linaro.org>
      Cc: Paul Walmsley <paul@pwsan.com>
      da91b89e
    • Vaibhav Hiremath's avatar
      ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry · 05cf03b6
      Vaibhav Hiremath authored
      This patch adds sysc definitions to the wdt1 hwmod entry, which in-turn
      makes sure that sysc idle bit-fields are configured to valid state on
      enable/disable callbacks.
      
      With the recent submitted patch from Santosh Shilimkar,
      "ARM: OMAP2+: hwmod: Don't call _init_mpu_rt_base if no sysc"
      (commit: 4a98c2d89), it is required to add sysconf
      information to each valid hwmod entry, else device will not be
      come out from idle state properly and leads to below kernel
      crash  -
      
      [2.190237] Unhandled fault: external abort on non-linefetch (0x1028) at
      0xf9e35034
      [2.198325] Internal error: : 1028 [#1] SMP ARM
      [2.203101] Modules linked in:
      [2.206334] CPU: 0    Not tainted  (3.9.0-rc3-00059-gd114294#1)
      [2.212679] PC is at omap_wdt_disable.clone.5+0xc/0x60
      [2.218090] LR is at omap_wdt_probe+0x184/0x1fc
      Signed-off-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
      Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
      Cc: Benoit Cousson <benoit.cousson@linaro.org>
      Cc: Paul Walmsley <paul@pwsan.com>
      05cf03b6
  4. 31 Mar, 2013 1 commit