- 09 Jun, 2023 1 commit
-
-
Christoph Hellwig authored
The previous rootwait fix added an -EINVAL return to a completely bogus superflous branch, fix this. Fixes: 1341c7d2 ("block: fix rootwait=") Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Jens Axboe <axboe@kernel.dk>
-
- 07 Jun, 2023 14 commits
-
-
Andy Shevchenko authored
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230310164549.22133-10-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Signed-off-by:
-
Andy Shevchenko authored
This makes the driver code slightly better to understand. Signed-off-by:
-
Andy Shevchenko authored
Use DEFINE_SHOW_ATTRIBUTE() helper macro to simplify the code. No functional change. Signed-off-by:
-
Andy Shevchenko authored
Since the commit 72deb455 ("block: remove CONFIG_LBDAF") the sector_t is always 64-bit type, no need to cast anymore. Signed-off-by:
-
Andy Shevchenko authored
The code can be neater without forward declarations. Get rid of pkt_seq_show() forward declaration. This will also allow futher cleanups to be cleaner. Signed-off-by:
-
Andy Shevchenko authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
-
Andy Shevchenko authored
The checkpatch.pl warns: "Prefer kstrto<type> to single variable sscanf". Fix the code accordingly. Signed-off-by:
-
Andy Shevchenko authored
We may use traditional dev_*() macros instead of custom ones provided by the driver. Signed-off-by:
-
Christoph Hellwig authored
Failures to look up the gendisk must return -ENODEV so that rootwait retries the lookup instead of -EINVAL which exits early. Fixes: cf056a43 ("init: improve the name_to_dev_t interface") Reported-by:
-
Waiman Long authored
When blkg_alloc() is called to allocate a blkcg_gq structure with the associated blkg_iostat_set's, there are 2 fields within blkg_iostat_set that requires proper initialization - blkg & sync. The former field was introduced by commit 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()") while the later one was introduced by commit f7331648 ("blk-cgroup: reimplement basic IO stats using cgroup rstat"). Unfortunately those fields in the blkg_iostat_set's are not properly re-initialized when they are cleared in v1's blkcg_reset_stats(). This can lead to a kernel panic due to NULL pointer access of the blkg pointer. The missing initialization of sync is less problematic and can be a problem in a debug kernel due to missing lockdep initialization. Fix these problems by re-initializing them after memory clearing. Fixes: 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()") Fixes: f7331648 ("blk-cgroup: reimplement basic IO stats using cgroup rstat") Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230606180724.2455066-1-longman@redhat.comSigned-off-by:
-
Yu Kuai authored
Recursive spin_lock/unlock_irq() is not safe, because spin_unlock_irq() will enable irq unconditionally: spin_lock_irq queue_lock -> disable irq spin_lock_irq ioc->lock spin_unlock_irq ioc->lock -> enable irq /* * AA dead lock will be triggered if current context is preempted by irq, * and irq try to hold queue_lock again. */ spin_unlock_irq queue_lock Fix this problem by using spin_lock/unlock() directly for 'ioc->lock'. Fixes: 5a0ac57c ("blk-ioc: protect ioc_destroy_icq() by 'queue_lock'") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Zhong Jinghua authored
If the index allocated by idr_alloc greater than MINORMASK >> part_shift, the device number will overflow, resulting in failure to create a block device. Fix it by imiting the size of the max allocation. Signed-off-by:
Zhong Jinghua <zhongjinghua@huawei.com> Reviewed-by:
-
Hou Tao authored
Since commit a78418e6 ("block: Always initialize bio IO priority on submit"), bio->bi_ioprio will never be IOPRIO_CLASS_NONE when calling blkcg_set_ioprio(), so there will be no way to promote the io-priority of one cgroup to IOPRIO_CLASS_RT, because bi_ioprio will always be greater than or equals to IOPRIO_CLASS_RT. It seems possible to call blkcg_set_ioprio() first then try to initialize bi_ioprio later in bio_set_ioprio(), but this doesn't work for bio in which bi_ioprio is already initialized (e.g., direct-io), so introduce a new promote-to-rt policy to promote the iopriority of bio to IOPRIO_CLASS_RT if the ioprio is not already RT. For none-to-rt policy, although it doesn't work now, but considering that its purpose was also to override the io-priority to RT and allowing for a smoother transition, just keep it and treat it as an alias of the promote-to-rt policy. Acked-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230428074404.280532-1-houtao@huaweicloud.comSigned-off-by:
-
- 05 Jun, 2023 25 commits
-
-
Li Nan authored
adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab4 ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by:Li Nan <linan122@huawei.com> Acked-by:
-
Christoph Hellwig authored
early_lookup_bdev is now only used during the early boot code as it should, so mark it __init to not waste run time memory on it. Signed-off-by:
-
Christoph Hellwig authored
early_lookup_bdev is supposed to only be called from the early boot code, but mdtblock_early_get_bdev is called as a general fallback when lookup_bdev fails, which is problematic because early_lookup_bdev bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to only call early_lookup_bdev when block2mtd is built-in and the system state in not running yet. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230531125535.676098-24-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Simplify add_device a bit by splitting out the cumbersome early boot logic into a separate helper. Signed-off-by:
-
Christoph Hellwig authored
resume_store is a sysfs attribute written during normal kernel runtime, and it should not use the early_lookup_bdev API that bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to lookup_bdev, which does a normal path lookup instead, and fall back to trying to parse a numeric dev_t just like early_lookup_bdev did. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Fixes: 421a5fa1 ("PM / hibernate: use name_to_dev_t to parse resume") Signed-off-by:
Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-22-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
early_lookup_bdev is supposed to only be called from the early boot code, but dm_get_device calls it as a general fallback when lookup_bdev fails, which is problematic because early_lookup_bdev bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to only call early_lookup_bdev when dm is built-in and the system state in not running yet. This means it is still available when tables are constructed by dm-init.c from the kernel command line, but not otherwise. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-21-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Open code dm_get_dev_t in the only remaining caller, and propagate the exact error code from lookup_bdev and early_lookup_bdev. Signed-off-by:
-
Christoph Hellwig authored
dm_init_init is called from early boot code, and thus lookup_bdev will never succeed. Just open code that call to early_lookup_bdev instead. Signed-off-by:
-
Christoph Hellwig authored
Use the block_device acquired in dm_get_device for the check instead of doing an extra lookup. Signed-off-by:
-
Christoph Hellwig authored
blk_lookup_devt is only used by code in early-lookup.c, so move it there. printk_all_partitions and it's helper bdevt_str are only used by the early init code in init/do_mounts.c, so they should go there as well. Signed-off-by:
-
Christoph Hellwig authored
Create a new block/early-lookup.c to keep the early block device lookup code instead of having this code sit with the early mount code. Signed-off-by:
-
Christoph Hellwig authored
Instead of only clearing root_wait in devt_from_partuuid when the UUID format was invalid, do that in parse_root_device for all strings that failed to parse. Signed-off-by:
-
Christoph Hellwig authored
name_to_dev_t has a very misleading name, that doesn't make clear it should only be used by the early init code, and also has a bad calling convention that doesn't allow returning different kinds of errors. Rename it to early_lookup_bdev to make the use case clear, and return an errno, where -EINVAL means the string could not be parsed, and -ENODEV means it the string was valid, but there was no device found for it. Also stub out the whole call for !CONFIG_BLOCK as all the non-block root cases are always covered in the caller. Signed-off-by:
-
Christoph Hellwig authored
The nfs/cifs/ram special case only needs to be parsed once, and only in the boot code. Move them out of name_to_dev_t and into prepare_namespace. Signed-off-by:
-
Christoph Hellwig authored
The root_wait logic is a bit obsfucated right now. Expand it and move it into a helper. Signed-off-by:
-
Christoph Hellwig authored
Assign a Root_Generic magic value for UBI/MTD root and handle the root mounting in mount_root like all other root types. Besides making the code more clear this also means that UBI/MTD root can be used together with an initrd (not that anyone should care). Also factor parsing of the root name into a helper now that it can be easily done and will get more complicated with subsequent patches. Signed-off-by:
-
Christoph Hellwig authored
Remove the code that drops the /dev/ prefix from root_device_name, which is only used for error messages when mounting the root device fails. Signed-off-by:
-
Christoph Hellwig authored
Instead of declaring root_device_name as a global variable pass it as an argument to the functions using it. Signed-off-by:
-
Christoph Hellwig authored
Provide stubs for all the lower level mount helpers, and just switch on ROOT_DEV in the main function. Signed-off-by:
-
Christoph Hellwig authored
mount_block_root is also used to mount non-block file systems, so give it a better name. Signed-off-by:
-
Christoph Hellwig authored
Remove all unused defines, and just use the expanded versions for the SCSI disk majors. I've decided to keep Root_RAM0 even if it could be expanded as there is a lot of special casing for it in the init code. Signed-off-by:
-
Christoph Hellwig authored
software_resume can be called either from an init call in the boot code, or from sysfs once the system has finished booting, and the two invocation methods this can't race with each other. For the latter case we did just parse the suspend device manually, while the former might not have one. Split software_resume so that the search only happens for the boot case, which also means the special lockdep nesting annotation can go away as the system transition mutex can be taken a little later and doesn't have the sysfs locking nest inside it. Signed-off-by:
-
Christoph Hellwig authored
Passing call dependent variable in global variables is a huge antipattern. Fix it up. Signed-off-by:
-
Christoph Hellwig authored
Split the logic to find the resume device out software_resume and into a separate helper to start unwindig the convoluted goto logic. Signed-off-by:
-
Christoph Hellwig authored
bool is the most sensible return value for a yes/no return. Also add __init as this funtion is only called from the early boot code. Signed-off-by:
-
