The call path in enetc_close() is:

enetc_close()
-> enetc_free_rxtx_rings()
   -> enetc_free_tx_ring()
      -> enetc_free_tx_frame()
-> enetc_free_tx_resources()
   -> enetc_free_txbdr()
      -> enetc_free_tx_frame()

The enetc_free_tx_frame() function is written such that the second call
exits without doing anything, but nonetheless, it is completely
redundant. Delete it. This makes the TX teardown path more similar to
the RX one, where rx_swbd freeing is done in enetc_free_rx_ring(), not
in enetc_free_rxbdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The call path in enetc_close() is:

enetc_close()
-> enetc_free_rxtx_rings()
   -> enetc_free_rx_ring()
      -> tests whether rx_ring->rx_swbd is NULL
   -> enetc_free_tx_ring()
      -> tests whether tx_ring->tx_swbd is NULL
-> enetc_free_rx_resources()
   -> enetc_free_rxbdr()
      -> sets rxr->rx_swbd to NULL
-> enetc_free_tx_resources()
   -> enetc_free_txbdr()
      -> setx txr->tx_swbd to NULL

From the above, it is clear that due to the function ordering, the
checks for NULL are redundant, since the software buffer descriptor
arrays have not yet been set to NULL. Drop these checks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is a refactoring change which introduces the opposite function of
enetc_dma_alloc_bdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is only one place which needs to set up indices in the RX ring.
Be consistent with what was done in the TX path and do this in
enetc_setup_rxbdr().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

enetc_alloc_txbdr() deals with allocating resources necessary for a TX
ring to work (the array of software BDs and the array of TSO headers).

The next_to_clean and next_to_use pointers are overwritten with proper
values which are read from hardware here:

enetc_open
-> enetc_alloc_tx_resources
   -> enetc_alloc_txbdr
      -> set to zero
-> enetc_setup_bdrs
   -> enetc_setup_txbdr
      -> read from hardware

So their initialization with zeroes is pointless and confusing.
Delete it.

Consequently, since enetc_setup_txbdr() has no opposite cleanup
function, also delete the resetting of these indices from
enetc_free_tx_ring().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Document in the XDP_REDIRECT manual section that drivers must call
xdp_do_flush() before napi_complete_done(). The two reasons behind
this can be found following the links below.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steen Hegelund says:

====================
sparx5: Improve locking in the VCAP API

This improves the VCAP cache and the VCAP rule list protection against
access from different sources.

The VCAP Admin lock protects the list of rules for the VCAP instance as
well as the cache used for encoding and decoding rules.

This series provides dedicated functions for accessing rule statistics,
decoding rule content, verifying if a rule exists and getting a rule with
the lock held, as well as ensuring the use of the lock when the list of
rules or the cache is accessed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that the KUNIT tests lock instance is initialized before the test is
executed.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This improves the VCAP cache and the VCAP rule list protection against
access from different sources.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures that the admin lock is taken before the debugFS functions
starts iterating the VCAP rules.
It also adds a separate function to decode a rule, which expects the lock
to have been taken before it is called.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new function that just checks if the VCAP rule id is already used by
an existing rule.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for TC clients to get the packet count for a TC filter
identified by its cookie.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rtl8152_cfgselector_probe() should set the USB configuration to the
vendor mode only for the devices which the driver (r8152) supports.
Otherwise, no driver would be used for such devices.

Fixes: ec51fbd1 ("r8152: add USB device driver for config selection")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver was capturing the TX timestamp values from the TX ring
during the TX completion path, but deferring the actual packet TX
timestamp updating to a workqueue. There does not seem to be much of a
reason for this with the current state of the driver. Simplify this to
just do the TX timestamping as part of the TX completion path, to avoid
the need for the extra timestamp buffer and workqueue.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtnet_rq_free_unused_buf() helper function to free the buffer
already exists. Avoid code duplication by reusing existing function.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Westphal says:

====================
Netfilter updates for net-next

following patch set includes netfilter updates for your *net-next* tree.

1. Replace pr_debug use with nf_log infra for debugging in sctp
   conntrack.
2. Remove pr_debug calls, they are either useless or we have better
   options in place.
3. Avoid repeated load of ct->status in some spots.
   Some bit-flags cannot change during the lifeetime of
   a connection, so no need to re-fetch those.
4. Avoid uneeded nesting of rcu_read_lock during tuple lookup.
5. Remove the CLUSTERIP target.  Marked as obsolete for years,
   and we still have WARN splats wrt. races of the out-of-band
   /proc interface installed by this target.
6. Add static key to nf_tables to avoid the retpoline mitigation
   if/else if cascade provided the cpu doesn't need the retpoline thunk.
7. add nf_tables objref calls to the retpoline mitigation workaround.
8. Split parts of nft_ct.c that do not need symbols exported by
   the conntrack modules and place them in nf_tables directly.
   This allows to avoid indirect call for 'ct status' checks.
9. Add 'destroy' commands to nf_tables.  They are identical
   to the existing 'delete' commands, but do not indicate
   an error if the referenced object (set, chain, rule...)
   did not exist, from Fernando.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Gerhard Engleder says:

====================
tsnep: XDP support

Implement XDP support for tsnep driver. I tried to follow existing
drivers like igb/igc as far as possible. Some prework was already done
in previous patch series, so in this series only actual XDP stuff is
included.

Thanks for the NetDev 0x14 slides "Add XDP support on a NIC driver".

Some commits contain changes not related to XDP but found during review
of XDP support patches.

v5:
- fix spelling of 'subtract' in commit message (Alexander Duyck)
- call txq_trans_cond_update() only if TX is complete (Alexander Duyck)
- remove const from static functions (Alexander Duyck)
- replace TX spin_lock with __netif_tx_lock (Alexander Duyck)
- use xdp_return_frame_rx_napi() instead of xdp_return_frame_bulk() (Alexander Duyck)
- eliminate __TSNEP_DOWN (Alexander Duyck)
- introduce single function for xdp_rxq and napi init (Alexander Duyck)
- use TX queue of pair instead of expensive processor id modulo for XDP_TX (Alexander Duyck)
- eliminate processor id modulo in tsnep_netdev_xdp_xmit (Alexander Duyck)
- use bitmap for TX type and add fragment type (Alexander Duyck)
- always use XDP_PACKET_HEADROOM and DMA_BIDIRECTIONAL

v4:
- remove process context from spin_lock_bh commit message (Alexander Lobakin)
- move tsnep_adapter::state to prevent 4 byte hole (Alexander Lobakin)
- braces for bitops in combination logical ops (Alexander Lobakin)
- make various pointers const (Alexander Lobakin)
- '!i' instead of 'i == 0' (Alexander Lobakin)
- removed redundant braces (Alexander Lobakin)
- squash variables into same line if same type (Alexander Lobakin)
- use fact that ::skb and ::xdpf use same slot for simplification (Alexander Lobakin)
- use u32 for smp_processor_id() (Alexander Lobakin)
- don't add $(tsnep-y) to $(tsnep-objs) (Alexander Lobakin)
- use rev xmas tree in tsnep_netdev_open() (Alexander Lobakin)
- do not move tsnep_queue::napi (Alexander Lobakin)
- call xdp_init_buff() only once (Alexander Lobakin)
- get nq and tx only once for XDP TX (Alexander Lobakin)
- move XDP BPF program setup to end of patch series (Alexander Lobakin)
- check for XDP state change and prevent redundant down-ups (Alexander Lobakin)
- access tsnep_adapter::xdp_prog only with READ_ONCE in RX path (Alexander Lobakin)
- forward NAPI budget to napi_consume_skb() (Alexander Lobakin)
- fix errno leftover in tsnep_xdp_xmit_back() (Dan Carpenter)
- eliminate tsnep_xdp_is_enabled() by setting RX offset during init

v3:
- use spin_lock_bh for TX (Paolo Abeni)
- add comment for XDP TX descriptor available check (Maciej Fijalkowski)
- return value bool for tsnep_xdp_xmit_frame_ring() (Saeed Mahameed)
- do not print DMA mapping error (Saeed Mahameed)
- use reverse xmas tree variable declaration (Saeed Mahameed)
- move struct xdp_rxq_info to end of struct tsnep_rx (Maciej Fijalkowski)
- check __TSNEP_DOWN flag on close to prevent double free (Saeed Mahameed)
- describe TSNEP_RX_INLINE_METADATA_SIZE in comment (Maciej Fijalkowski)
- substract TSNEP_RX_INLINE_METADATA_SIZE after DMA sync (Maciej Fijalkowski)
- use enum tsnep_tx_type for tsnep_xdp_tx_map (Saeed Mahameed)
- use nxmit as loop iterator in tsnep_netdev_xdp_xmit (Saeed Mahameed)
- stop netdev in tsnep_netdev_close() which is called during BPF prog setup

v2:
- move tsnep_xdp_xmit_back() to commit where it is used (Paolo Abeni)
- remove inline from tsnep_rx_offset() (Paolo Abeni)
- remove inline from tsnep_rx_offset_xdp() (Paolo Abeni)
- simplify tsnep_xdp_run_prog() call by moving xdp_status update to it (Paolo Abeni)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement setup of BPF programs for XDP RX path with command
XDP_SETUP_PROG of ndo_bpf(). This is the final step for XDP RX path
support.

There is no need to reinit the RX queues as they are always prepared for
XDP.

Additionally remove $(tsnep-y) from $(tsnep-objs) because it is added
automatically.

Test results with A53 1.2GHz:

XDP_DROP (samples/bpf/xdp1)
proto 17:     883878 pkt/s

XDP_TX (samples/bpf/xdp2)
proto 17:     255693 pkt/s

XDP_REDIRECT (samples/bpf/xdpsock)
 sock0@eth2:0 rxdrop xdp-drv
                   pps            pkts           1.00
rx                 855,582        5,404,523
tx                 0              0

XDP_REDIRECT (samples/bpf/xdp_redirect)
eth2->eth1         613,267 rx/s   0 err,drop/s   613,272 xmit/s
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If BPF program is set up, then run BPF program for every received frame
and execute the selected action.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Register xdp_rxq_info with page_pool memory model. This is needed for
XDP buffer handling.

Additionally fix error path by removing call of tsnep_phy_close() after
failed tsnep_phy_open().
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Always reserve XDP_PACKET_HEADROOM in front of RX buffer. Similar DMA
direction is always set to DMA_BIDIRECTIONAL. This eliminates the need
for RX queue reconfiguration during BPF program setup. The RX queue is
always prepared for XDP.

No negative impact of DMA_BIDIRECTIONAL was measured.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Subtract size of metadata in front of received data only once. This
simplifies the RX code.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement ndo_xdp_xmit() for XDP TX support. Support for fragmented XDP
frames is included.

Also some braces and logic cleanups are done in normal TX path to keep
both TX paths in sync.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Printing in data path shall be avoided. DMA mapping error is already
counted in stats so printing is not necessary.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NAPI budget must be forwarded to napi_consume_skb(). It is used to
detect non-NAPI context.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TX spin_lock can be eliminated, because the normal TX path is already
protected with __netif_tx_lock and this lock can be used for access to
queue outside of normal TX path too.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When netdev->flags has IFF_PROMISC or IFF_ALLMULTI, set the
corresponding bits in the MAC Control Register (MACCR).

This change is based on code from the ftgmac100 driver, see
ftgmac100_start_hw() in ftgmac100.c
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Per cpu entries are no longer used in consideration
for doing gc or not. Remove the extra per cpu entries
pull to directly check for time and perform gc.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Siddharth Vadapalli says:

====================
Add PPS support to am65-cpts driver

The CPTS hardware doesn't support PPS signal generation. Using the GenFx
(periodic signal generator) function, it is possible to model a PPS signal
followed by routing it via the time sync router to the CPTS_HWy_TS_PUSH
(hardware time stamp) input, in order to generate timestamps at 1 second
intervals.

This series adds driver support for enabling PPS signal generation.
Additionally, the documentation for the am65-cpts driver is updated with
the bindings for the "ti,pps" property, which is used to inform the
pair [CPTS_HWy_TS_PUSH, GenFx] to the cpts driver.

Changes from v1:
1. Drop device-tree patches.
2. Address Roger's comments on the:
   "net: ethernet: ti: am65-cpts: add pps support" patch.
3. Collect Reviewed-by tag from Rob Herring.

v1:
https://lore.kernel.org/r/20230111114429.1297557-1-s-vadapalli@ti.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When CPTS clock is sync/adjusted by running linuxptp (ptp4l) it will cause
PPS jitter as Genf running PPS is not adjusted.

The same PPM adjustment has to be applied to GenF as to PHC clock to
correct PPS length and keep them in sync.

Testing:
 Master:
  ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp.cfg &
  testptp -d /dev/ptp1 -P 1
  ppstest /dev/pps0

 Slave:
  linuxptp/ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp1 -f ptp1.cfg -s &
    <port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED;>
  testptp -d /dev/ptp1 -P 1
  ppstest /dev/pps0

Master log:
source 0 - assert 620.000000689, sequence: 530
source 0 - assert 621.000000689, sequence: 531
source 0 - assert 622.000000689, sequence: 532
source 0 - assert 623.000000689, sequence: 533
source 0 - assert 624.000000689, sequence: 534
source 0 - assert 625.000000689, sequence: 535
source 0 - assert 626.000000689, sequence: 536
source 0 - assert 627.000000689, sequence: 537
source 0 - assert 628.000000689, sequence: 538
source 0 - assert 629.000000689, sequence: 539
source 0 - assert 630.000000689, sequence: 540
source 0 - assert 631.000000689, sequence: 541
source 0 - assert 632.000000689, sequence: 542
source 0 - assert 633.000000689, sequence: 543
source 0 - assert 634.000000689, sequence: 544
source 0 - assert 635.000000689, sequence: 545

Slave log:
source 0 - assert 620.000000706, sequence: 252
source 0 - assert 621.000000709, sequence: 253
source 0 - assert 622.000000707, sequence: 254
source 0 - assert 623.000000707, sequence: 255
source 0 - assert 624.000000706, sequence: 256
source 0 - assert 625.000000705, sequence: 257
source 0 - assert 626.000000709, sequence: 258
source 0 - assert 627.000000709, sequence: 259
source 0 - assert 628.000000707, sequence: 260
source 0 - assert 629.000000706, sequence: 261
source 0 - assert 630.000000710, sequence: 262
source 0 - assert 631.000000708, sequence: 263
source 0 - assert 632.000000705, sequence: 264
source 0 - assert 633.000000710, sequence: 265
source 0 - assert 634.000000708, sequence: 266
source 0 - assert 635.000000707, sequence: 267
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

CPTS doesn't have HW support for PPS ("pulse per second”) signal
generation, but it can be modeled by using Time Sync Router and routing
GenFx (periodic signal generator) output to CPTS_HWy_TS_PUSH (hardware time
stamp) input, and configuring GenFx to generate 1sec pulses.

     +------------------------+
     |          CPTS          |
     |                        |
 +--->CPTS_HW4_PUSH      GENFx+---+
 |   |                        |   |
 |   +------------------------+   |
 |                                |
 +--------------------------------+

Add corresponding support to am65-cpts driver. The DT property "ti,pps"
has to be used to enable PPS support and configure pair
[CPTS_HWy_TS_PUSH, GenFx].

Once enabled, PPS can be tested using ppstest tool:
 # ./ppstest /dev/pps0
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the ti,pps property used to indicate the pair of HWx_TS_PUSH input and
the TS_GENFy output.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clark Wang says:

====================
stmmac: Add eqos and fec support for imx93

This patchset add imx93 support for dwmac-imx glue driver.
There are some changes of GPR implement.
And add fec and eqos nodes for imx93 dts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable FEC function for imx93-11x11-evk board.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable EQoS function for imx93-11x11-evk board.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add FEC node for imx93 platform.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add EQoS node for imx93 platform.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mx93 compatible string for fec driver.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mx93 compatible string for eqos driver.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add imx93 platform support for dwmac-imx driver.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>