- 27 May, 2014 30 commits
-
-
Johan Hovold authored
Remove unused variable from sierra_release_urb. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Remove bogus endpoint-address test which is never true. Signed-off-by:
-
Johan Hovold authored
The sierra line-control request has been using the wrong pipe direction, while relying on USB core to fix it up. Signed-off-by:
-
Johan Hovold authored
Add error message to resume error path and make sure to also return an error when failing to submit a cached write. Signed-off-by:
-
Johan Hovold authored
Make sure to stop all I/O, including any active write urbs, at shutdown. Signed-off-by:
-
Johan Hovold authored
Fix characters potentially being dropped at close due to missing chars_in_buffer implementation. Note that currently the write urbs are not even killed at close (will be fixed separately), but this could still lead to dropped data since we have lowered DTR/RTS. Signed-off-by:
-
Johan Hovold authored
Make sure that needs_remote_wake up is always set when there are open ports. Currently close() would unconditionally set needs_remote_wakeup to 0 even though there might still be open ports. This could lead to blocked input and possibly dropped data on devices that do not support remote wakeup (and which must therefore not be runtime suspended while open). Add an open_ports counter (protected by the susp_lock) and only clear needs_remote_wakeup when the last port is closed. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
The delayed-write queue was never emptied on disconnect, something which would lead to leaked urbs and transfer buffers if the device is disconnected before being runtime resumed due to a write. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
Neither the transfer buffer or the urb itself were released in the resume error path for delayed writes. Also on errors, the remainder of the queue was not even processed, which leads to further urb and buffer leaks. The same error path also failed to balance the outstanding-urb counter, something which results in degraded throughput or completely blocked writes. Fix this by releasing urb and buffer and balancing counters on errors, and by always processing the whole queue even when submission of one urb fails. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
Fix use after free or NULL-pointer dereference during suspend and resume. The port data may never have been allocated (port probe failed) or may already have been released by port_remove (e.g. driver is unloaded) when suspend and resume are called. Fixes: e6929a90 ("USB: support for autosuspend in sierra while online") Cc: <stable@vger.kernel.org> # v2.6.32 Signed-off-by:
-
Johan Hovold authored
Fix AA deadlock in open error path that would call close() and try to grab the already held disc_mutex. Fixes: b9a44bc1 ("sierra: driver urb handling improvements") Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Joe Perches authored
Use a more standard logging style. Add terminating newlines to formats. Remove __func__ as that can be added via dynamic debug. Remove now unnecessary debug module parameter. Remove the dbg macro too. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use a newline character appropriately. Signed-off-by:
-
Bjørn Mork authored
Matching on interface numbers was not such a good idea for multi-function serial devices after all. It is much better do create well defined device layouts, allowing a single match entry per device. Remove this now unused code. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
All the "non Gobi" Qualcomm based devices handled by this driver share a common standard Sierra Wireless specific layout. Adding code specifically for this layout allow us to reduce the number of match entries per device from three to one. This change will result in a penalty wrt stable backports, but simplifies new Sierra device addtitions in the long term. Signed-off-by:
-
Bjørn Mork authored
Preparing for more supported standard device layouts. Keeping the matching macros unchanged to avoid breaking stable backporting of new device additions. Signed-off-by:
-
Bjørn Mork authored
Use a consistent style for all multiline comments. Signed-off-by:
-
Thomas Pugliese authored
Add better error messages during the channel change/reservation establish process. Signed-off-by:
Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by:
-
Thomas Pugliese authored
Make the transition to the UWB_RSV_STATE_NONE state synchronous so that there is not a race between uwb_rsv_terminate and uwb_rsv_establish. uwb_rsv_terminate would set the rsv->state to UWB_RSV_STATE_NONE but did not release the stream resource until a 320ms timeout had expired. If a user called uwb_rsv_establish during that time, it could fail to establish the reservation because no stream resources were available. This patch removes the timer from the uwb_rsv_terminate process since it is not needed when transitioning to UWB_RSV_STATE_NONE. Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
Vivek Gautam <gautam.vivek@samsung.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
-
Vivek Gautam authored
Using devm_ioremap_resource() API should actually be preferred over devm_ioremap(), since the former request the mem region first and then gives back the ioremap'ed memory pointer. devm_ioremap_resource() calls request_mem_region(), therby preventing other drivers to make any overlapping call to the same region. Signed-off-by:
-
Kamil Debski authored
Add the phy provider, supplied by new Exynos-usb2phy using Generic phy framework. Keeping the support for older USB phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ehci-exynos. Once we move to new phy in the device nodes for ehci, we can remove the support for older phys. Signed-off-by:
Kamil Debski <k.debski@samsung.com> [gautam.vivek@samsung.com: Addressed review comments from mailing list] [gautam.vivek@samsung.com: Kept the code for old usb-phy, and just added support for new exynos5-usb2phy in generic phy framework] [gautam.vivek@samsung.com: Edited the commit message] Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Reviewed-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Add support to consume phy provided by Generic phy framework. Keeping the support for older usb-phy intact right now, in order to prevent any functionality break in absence of relevant device tree side change for ohci-exynos. Once we move to new phy in the device nodes for ohci, we can remove the support for older phys. Signed-off-by:
-
Vivek Gautam authored
Change to use struct device instead of struct platform_device for some static functions. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
-
Vivek Gautam authored
Change to use struct device instead of struct platform_device for some static functions. Signed-off-by:
-
Jean Delvare authored
The Renesas R-Car USB PHY driver only supports the R8A7778 and R8A7779, it isn't useful on other systems unless build testing. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 23 May, 2014 10 commits
-
-
Dan Carpenter authored
My previous patch introduced a bug which prevented this driver from loading. devm_ioremap_resource() has a call to devm_request_mem_region() which will fail because the address space is shared between this PHY driver and CI device controller driver. Fixes: 10f0577a ('usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()') Reported-by:
"Ivan T. Ivanov" <iivanov@mm-sol.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Peter Chen authored
Update device states according to ch9 in USB 2.0 specification Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Peter Chen authored
When tried to enable OTG FSM, we need to rebuild both kernel Image and modules, since there are some codes at gadget modules which are controlled by related configurations. Signed-off-by:
-
Ivan T. Ivanov authored
Since commit 62bb84ed (usb: gadget: ci13xxx: convert to platform device) start address of the capability registers is not passed correctly to udc_probe(). Fix this. Signed-off-by:
-
Ivan T. Ivanov authored
Allows controller to be specified via device tree. Pass PHY phandle specified in DT to core driver. Signed-off-by:
-
Ivan T. Ivanov authored
Document device tree binding information as required by the Qualcomm USB controller. Signed-off-by:
-
Fabio Estevam authored
The field PLLDIVVALUE of register PHY_CTRL_1 selects the reference clock source for the PHY: 00 = sysclock uses 19.2 MHz 01 = sysclock uses 24 MHz 10 = sysclock uses 26 MHz 11 = sysclock uses 27 MHz The reset value for this field is 10 according to the reference manual, and even though this reset value works for mx53, it does not work for mx51. So instead of relying on the reset value for the PLLDIVVALUE field, explicitly set it to 01 so that a 24MHz clock can be selected for the PHY and allowing both mx51 and mx53 to have USB OTG port functional. Succesfully tested 'g_ether' on a imx51-babbage and on a imx53-qsb boards. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Peter Chen authored
The otg queue work include operations: one is disable interrupt, another one is call kernel queue work API. Many codes do this operation, using one inline function to instead of them. Signed-off-by:
-
Peter Chen authored
Delete useless code Signed-off-by:
-
Peter Chen authored
Update TODO list Signed-off-by:
-
