BPF tail call uses the BPF_MAP_TYPE_PROG_ARRAY type map for calling
into other BPF programs and this PROG_ARRAY should be filled prior to
use. Currently, samples with the PROG_ARRAY type MAP fill this program
array with bpf_load. For bpf_load to fill this map, kernel BPF program
must specify the section with specific format of <prog_type>/<array_idx>
(e.g. SEC("socket/0"))

But by using libbpf instead of bpf_load, user program can specify which
programs should be added to PROG_ARRAY. The advantage of this approach
is that you can selectively add only the programs you want, rather than
adding all of them to PROG_ARRAY, and it's much more intuitive than the
traditional approach.

This commit refactors user programs with the PROG_ARRAY type MAP with
libbpf instead of using bpf_load.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-4-danieltimlee@gmail.com

Currently, the kprobe BPF program attachment method for bpf_load is
quite old. The implementation of bpf_load "directly" controls and
manages(create, delete) the kprobe events of DEBUGFS. On the other hand,
using using the libbpf automatically manages the kprobe event.
(under bpf_link interface)

By calling bpf_program__attach(_kprobe) in libbpf, the corresponding
kprobe is created and the BPF program will be attached to this kprobe.
To remove this, by simply invoking bpf_link__destroy will clean up the
event.

This commit refactors kprobe tracing programs (tracex{1~7}_user.c) with
libbpf using bpf_link interface and bpf_program__attach.

tracex2_kern.c, which tracks system calls (sys_*), has been modified to
append prefix depending on architecture.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-3-danieltimlee@gmail.com

Current method of checking pointer error is not user friendly.
Especially the __must_check define makes this less intuitive.

Since, libbpf has an API libbpf_get_error() which checks pointer error,
this commit refactors existing pointer error check logic with libbpf.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200516040608.1377876-2-danieltimlee@gmail.com

Until now we have only had minimal ktls+sockmap testing when being
used with helpers and different sendmsg/sendpage patterns. Add a
pass with ktls here.

To run just ktls tests,

 $ ./test_sockmap --whitelist="ktls"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939736278.15176.5435314315563203761.stgit@john-Precision-5820-Tower

This adds a blacklist to test_sockmap. For example, now we can run
all apply and cork tests except those with timeouts by doing,

 $ ./test_sockmap --whitelist "apply,cork" --blacklist "hang"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939734350.15176.6643981099665208826.stgit@john-Precision-5820-Tower

Allow running specific tests with a comma deliminated whitelist. For example
to run all apply and cork tests.

 $ ./test_sockmap --whitelist="cork,apply"
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939732464.15176.1959113294944564542.stgit@john-Precision-5820-Tower

Pass options from command line args into individual tests which allows us
to use verbose option from command line with selftests. Now when verbose
option is set individual subtest details will be printed. Also we can
consolidate cgroup bring up and tear down.

Additionally just setting verbose is very noisy so introduce verbose=1
and verbose=2. Really verbose=2 is only useful when developing tests
or debugging some specific issue.

For example now we get output like this with --verbose,

#20/17 sockhash:txmsg test pull-data:OK
 [TEST 160]: (512, 1, 3, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 161]: (100, 1, 5, sendpage, pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 162]: (2, 1024, 256, sendpage, pop (4096,8192),): msg_loop_rx: iov_count 1 iov_buf 255 cnt 2 err 0
 [TEST 163]: (512, 1, 3, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 164]: (100, 1, 5, sendpage, redir,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 165]: (512, 1, 3, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 166]: (100, 1, 5, sendpage, cork 512,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
 [TEST 167]: (512, 1, 3, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 1 cnt 512 err 0
 [TEST 168]: (100, 1, 5, sendpage, redir,cork 4,pop (1,3),): msg_loop_rx: iov_count 1 iov_buf 3 cnt 100 err 0
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939730412.15176.1975675235035143367.stgit@john-Precision-5820-Tower

At the moment test_sockmap runs all 800+ tests ungrouped which is not
ideal because it makes it hard to see what is failing but also more
importantly its hard to confirm all cases are tested. Additionally,
after inspecting we noticed the runtime is bloated because we run
many duplicate tests. Worse some of these tests are known error cases
that wait for the recvmsg handler to timeout which creats long delays.
Also we noted some tests were not clearing their options and as a
result the following tests would run with extra and incorrect options.

Fix this by reorganizing test code so its clear what tests are running
and when. Then it becomes easy to remove duplication and run tests with
only the set of send/recv patterns that are relavent.

To accomplish this break test_sockmap into subtests and remove
unnecessary duplication. The output is more readable now and
the runtime reduced.

Now default output prints subtests like this,

 $ ./test_sockmap
 # 1/ 6  sockmap:txmsg test passthrough:OK
 ...
 #22/ 1 sockhash:txmsg test push/pop data:OK
 Pass: 22 Fail: 0
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939728384.15176.13601520183665880762.stgit@john-Precision-5820-Tower

The recv thread in test_sockmap waits to receive all bytes from sender but
in the case we use pop data it may wait for more bytes then actually being
sent. This stalls the test harness for multiple seconds. Because this
happens in multiple tests it slows time to run the selftest.

Fix by doing a better job of accounting for total bytes when pop helpers
are used.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939726542.15176.5964532245173539540.stgit@john-Precision-5820-Tower

Its helpful to know the error value if an error occurs.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939724566.15176.12079885932643225626.stgit@john-Precision-5820-Tower

Running test_sockmap with arguments to specify a test pattern requires
including a cgroup argument. Instead of requiring this if the option is
not provided create one

This is not used by selftest runs but I use it when I want to test a
specific test. Most useful when developing new code and/or tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939722675.15176.6294210959489131688.stgit@john-Precision-5820-Tower

The prints in the test_sockmap programs were only useful when we
didn't have enough control over test infrastructure to know from
user program what was being pushed into kernel side.

Now that we have or will shortly have better test controls lets
remove the printers. This means we can remove half the programs
and cleanup bpf side.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939720756.15176.9806965887313279429.stgit@john-Precision-5820-Tower

Moves test_sockmap_kern.h into progs directory but does not change
code at all.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/158939718921.15176.5766299102332077086.stgit@john-Precision-5820-Tower

There is a much higher chance we can see the regressions if the
test is part of test_progs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-2-sdf@google.com

Commit 294f2fc6 ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.

Fixes: 294f2fc6 ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com

Fixes the following warnings:

  hashmap.c: In function ‘hashmap__clear’:
  hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
    150 |  for (bkt = 0; bkt < map->cap; bkt++)        \

  hashmap.c: In function ‘hashmap_grow’:
  hashmap.h:150:20: error: comparison of integer expressions of different signedness: ‘int’ and ‘size_t’ {aka ‘long unsigned int’} [-Werror=sign-compare]
    150 |  for (bkt = 0; bkt < map->cap; bkt++)        \
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-4-irogers@google.com

Remove #include of libbpf_internal.h that is unused.

Discussed in this thread:
https://lore.kernel.org/lkml/CAEf4BzZRmiEds_8R8g4vaAeWvJzPb4xYLnpF0X2VNY8oTzkphQ@mail.gmail.com/Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200515165007.217120-3-irogers@google.com

As per 15d83c4d ("bpf: Allow loading of a bpf_iter program") we only
allow a range of [0,1] for return codes. Therefore BPF_TRACE_ITER relies
on the default tnum_range(0, 1) which is set in range var. On recent merge
of net into net-next commit e92888c7 ("bpf: Enforce returning 0 for
fentry/fexit progs") got pulled in and caused a merge conflict with the
changes from 15d83c4d. The resolution had a snall hiccup in that it
removed the [0,1] range restriction again so that BPF_TRACE_ITER would
have no enforcement. Fix it by adding it back.

Fixes: da07f52d ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>

Move the bpf verifier trace check into the new switch statement in
HEAD.

Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix sk_psock reference count leak on receive, from Xiyu Yang.

 2) CONFIG_HNS should be invisible, from Geert Uytterhoeven.

 3) Don't allow locking route MTUs in ipv6, RFCs actually forbid this,
    from Maciej Żenczykowski.

 4) ipv4 route redirect backoff wasn't actually enforced, from Paolo
    Abeni.

 5) Fix netprio cgroup v2 leak, from Zefan Li.

 6) Fix infinite loop on rmmod in conntrack, from Florian Westphal.

 7) Fix tcp SO_RCVLOWAT hangs, from Eric Dumazet.

 8) Various bpf probe handling fixes, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  selftests: mptcp: pm: rm the right tmp file
  dpaa2-eth: properly handle buffer size restrictions
  bpf: Restrict bpf_trace_printk()'s %s usage and add %pks, %pus specifier
  bpf: Add bpf_probe_read_{user, kernel}_str() to do_refine_retval_range
  bpf: Restrict bpf_probe_read{, str}() only to archs where they work
  MAINTAINERS: Mark networking drivers as Maintained.
  ipmr: Add lockdep expression to ipmr_for_each_table macro
  ipmr: Fix RCU list debugging warning
  drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.c
  net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810
  tcp: fix error recovery in tcp_zerocopy_receive()
  MAINTAINERS: Add Jakub to networking drivers.
  MAINTAINERS: another add of Karsten Graul for S390 networking
  drivers: ipa: fix typos for ipa_smp2p structure doc
  pppoe: only process PADT targeted at local interfaces
  selftests/bpf: Enforce returning 0 for fentry/fexit programs
  bpf: Enforce returning 0 for fentry/fexit progs
  net: stmmac: fix num_por initialization
  security: Fix the default value of secid_to_secctx hook
  libbpf: Fix register naming in PT_REGS s390 macros
  ...

Pull rdma fixes from Jason Gunthorpe:
 "A few minor bug fixes for user visible defects, and one regression:

   - Various bugs from static checkers and syzkaller

   - Add missing error checking in mlx4

   - Prevent RTNL lock recursion in i40iw

   - Fix segfault in cxgb4 in peer abort cases

   - Fix a regression added in 5.7 where the IB_EVENT_DEVICE_FATAL could
     be lost, and wasn't delivered to all the FDs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/uverbs: Move IB_EVENT_DEVICE_FATAL to destroy_uobj
  RDMA/uverbs: Do not discard the IB_EVENT_DEVICE_FATAL event
  RDMA/iw_cxgb4: Fix incorrect function parameters
  RDMA/core: Fix double put of resource
  IB/core: Fix potential NULL pointer dereference in pkey cache
  IB/hfi1: Fix another case where pq is left on waitlist
  IB/i40iw: Remove bogus call to netdev_master_upper_dev_get()
  IB/mlx4: Test return value of calls to ib_get_cached_pkey
  RDMA/rxe: Always return ERR_PTR from rxe_create_mmap_info()
  i40iw: Fix error handling in i40iw_manage_arp_cache()

Merge tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:

 - lkdtm runner fixes to prevent dmesg clearing and shellcheck errors

 - ftrace test handling when test module doesn't exist

 - nsfs test fix to replace zero-length array with flexible-array

 - dmabuf-heaps test fix to return clear error value

* tag 'linux-kselftest-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/lkdtm: Use grep -E instead of egrep
  selftests/lkdtm: Don't clear dmesg when running tests
  selftests/ftrace: mark irqsoff_tracer.tc test as unresolved if the test module does not exist
  tools/testing: Replace zero-length array with flexible-array
  kselftests: dmabuf-heaps: Fix confused return value on expected error testing

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of build fixes, all found by Huawei's autobuilder.

  None of these patches should have any functional impact on kernels
  that build, and they're mostly related to various features
  intermingling with !MMU.

  While some of these might be better hoisted to generic code, it seems
  better to have the simple fixes in the meanwhile.

  As far as I know these are the only outstanding patches for 5.7"

* tag 'riscv-for-linus-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: mmiowb: Fix implicit declaration of function 'smp_processor_id'
  riscv: pgtable: Fix __kernel_map_pages build error if NOMMU
  riscv: Make SYS_SUPPORTS_HUGETLBFS depends on MMU
  riscv: Disable ARCH_HAS_DEBUG_VIRTUAL if NOMMU
  riscv: Add pgprot_writecombine/device and PAGE_SHARED defination if NOMMU
  riscv: stacktrace: Fix undefined reference to `walk_stackframe'
  riscv: Fix unmet direct dependencies built based on SOC_VIRT
  riscv: perf: RISCV_BASE_PMU should be independent
  riscv: perf_event: Make some funciton static

Paolo Abeni says:

====================
mptcp: fix MP_JOIN failure handling

Currently if we hit an MP_JOIN failure on the third ack, the child socket is
closed with reset, but the request socket is not deleted, causing weird
behaviors.

The main problem is that MPTCP's MP_JOIN code needs to plug it's own
'valid 3rd ack' checks and the current TCP callbacks do not allow that.

This series tries to address the above shortcoming introducing a new MPTCP
specific bit in a 'struct tcp_request_sock' hole, and leveraging that to allow
tcp_check_req releasing the request socket when needed.

The above allows cleaning-up a bit current MPTCP hooking in tcp_check_req().

An alternative solution, possibly cleaner but more invasive, would be
changing the 'bool *own_req' syn_recv_sock() argument into 'int *req_status'
and let MPTCP set it to 'REQ_DROP'.

v1 -> v2:
 - be more conservative about drop_req initialization

RFC -> v1:
 - move the drop_req bit inside tcp_request_sock (Eric)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, on MP_JOIN failure we reset the child
socket, but leave the request socket untouched.

tcp_check_req will deal with it according to the
'tcp_abort_on_overflow' sysctl value - by default the
req socket will stay alive.

The above leads to inconsistent behavior on MP JOIN
failure, and bad listener overflow accounting.

This patch addresses the issue leveraging the infrastructure
just introduced to ask the TCP stack to drop the req on
failure.

The child socket is not freed anymore by subflow_syn_recv_sock(),
instead it's moved to a dead state and will be disposed by the
next sock_put done by the TCP stack, so that listener overflow
accounting is not affected by MP JOIN failure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the steps to prepare an inet_connection_sock for
forced disposal inside a separate helper. No functional
changes inteded, this will just simplify the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MP_JOIN subflows must not land into the accept queue.
Currently tcp_check_req() calls an mptcp specific helper
to detect such scenario.

Such helper leverages the subflow context to check for
MP_JOIN subflows. We need to deal also with MP JOIN
failures, even when the subflow context is not available
due allocation failure.

A possible solution would be changing the syn_recv_sock()
signature to allow returning a more descriptive action/
error code and deal with that in tcp_check_req().

Since the above need is MPTCP specific, this patch instead
uses a TCP request socket hole to add a MPTCP specific flag.
Such flag is used by the MPTCP syn_recv_sock() to tell
tcp_check_req() how to deal with the request socket.

This change is a no-op for !MPTCP build, and makes the
MPTCP code simpler. It allows also the next patch to deal
correctly with MP JOIN failure.

v1 -> v2:
 - be more conservative on drop_req initialization (Mat)

RFC -> v1:
 - move the drop_req bit inside tcp_request_sock (Eric)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull arm64 fix from Catalin Marinas:
 "Fix flush_icache_range() second argument in machine_kexec() to be an
  address rather than size"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix the flush_icache_range arguments in machine_kexec

A typical 100Base-T1 link should be always connected. If the link is in
a shot or open state, it is a failure. In most cases, we won't be able
to automatically handle this issue, but we need to log it or notify user
(if possible).

With this patch, the cable will be tested on "ip l s dev .. up" attempt
and send ethnl notification to the user space.

This patch was tested with TJA1102 PHY and "ethtool --monitor" command.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-05-15

The following pull-request contains BPF updates for your *net* tree.

We've added 9 non-merge commits during the last 2 day(s) which contain
a total of 14 files changed, 137 insertions(+), 43 deletions(-).

The main changes are:

1) Fix secid_to_secctx LSM hook default value, from Anders.

2) Fix bug in mmap of bpf array, from Andrii.

3) Restrict bpf_probe_read to archs where they work, from Daniel.

4) Enforce returning 0 for fentry/fexit progs, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The BCM54811 PHY shares many similarities with the already supported BCM54810
PHY but additionally requires some semi-unique configuration.
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: improve and tune TC-MQPRIO offload

Patch 1 improves the Tx path's credit request and recovery mechanism
when running under heavy load.

Patch 2 adds ability to tune the burst buffer sizes of all traffic
classes to improve performance for <= 1500 MTU, under heavy load.

Patch 3 adds support to track EOTIDs and dump software queue
contexts used by TC-MQPRIO offload.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rework and add support for dumping EOTID software context used by
TC-MQPRIO. Also track number of EOTIDs in use.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For each traffic class, firmware handles up to 4 * MTU amount of data
per burst cycle. Under heavy load, this small buffer size is a
bottleneck when buffering large TSO packets in <= 1500 MTU case.
Increase the burst buffer size to 8 * MTU when supported.

Also, keep the driver's traffic class configuration API similar to
the firmware API counterpart.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Request credit update for every half credits consumed, including
the current request. Also, avoid re-trying to post packets when there
are no credits left. The credit update reply via interrupt will
eventually restore the credits and will invoke the Tx path again.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2020-05-15

The following pull-request contains BPF updates for your *net-next* tree.

We've added 37 non-merge commits during the last 1 day(s) which contain
a total of 67 files changed, 741 insertions(+), 252 deletions(-).

The main changes are:

1) bpf_xdp_adjust_tail() now allows to grow the tail as well, from Jesper.

2) bpftool can probe CONFIG_HZ, from Daniel.

3) CAP_BPF is introduced to isolate user processes that use BPF infra and
   to secure BPF networking services by dropping CAP_SYS_ADMIN requirement
   in certain cases, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow DSA to add VLAN entries even if VLAN filtering is disabled, so
enabling it will not block the traffic of existent ports in the bridge
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlad Buslov says:

====================
Implement classifier-action terse dump mode

Output rate of current upstream kernel TC filter dump implementation if
relatively low (~100k rules/sec depending on configuration). This
constraint impacts performance of software switch implementation that
rely on TC for their datapath implementation and periodically call TC
filter dump to update rules stats. Moreover, TC filter dump output a lot
of static data that don't change during the filter lifecycle (filter
key, specific action details, etc.) which constitutes significant
portion of payload on resulting netlink packets and increases amount of
syscalls necessary to dump all filters on particular Qdisc. In order to
significantly improve filter dump rate this patch sets implement new
mode of TC filter dump operation named "terse dump" mode. In this mode
only parameters necessary to identify the filter (handle, action cookie,
etc.) and data that can change during filter lifecycle (filter flags,
action stats, etc.) are preserved in dump output while everything else
is omitted.

Userspace API is implemented using new TCA_DUMP_FLAGS tlv with only
available flag value TCA_DUMP_FLAGS_TERSE. Internally, new API requires
individual classifier support (new tcf_proto_ops->terse_dump()
callback). Support for action terse dump is implemented in act API and
don't require changing individual action implementations.

The following table provides performance comparison between regular
filter dump and new terse dump mode for two classifier-action profiles:
one minimal config with L2 flower classifier and single gact action and
another heavier config with L2+5tuple flower classifier with
tunnel_key+mirred actions.

 Classifier-action type      |        dump |  terse dump | X improvement
                             | (rules/sec) | (rules/sec) |
-----------------------------+-------------+-------------+---------------
 L2 with gact                |       141.8 |       293.2 |          2.07
 L2+5tuple tunnel_key+mirred |        76.4 |       198.8 |          2.60

Benchmark details: to measure the rate tc filter dump and terse dump
commands are invoked on ingress Qdisc that have one million filters
configured using following commands.

> time sudo tc -s filter show dev ens1f0 ingress >/dev/null

> time sudo tc -s filter show terse dev ens1f0 ingress >/dev/null

Value in results table is calculated by dividing 1000000 total rules by
"real" time reported by time command.

Setup details: 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 32GB memory
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

"$err" is a variable pointing to a temp file. "$out" is not: only used
as a local variable in "check()" and representing the output of a
command line.

Fixes: eedbc685 (selftests: add PM netlink functional tests)
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Depending on the WRIOP version, the buffer size on the RX path must by a
multiple of 64 or 256. Handle this restriction properly by aligning down
the buffer size to the necessary value. Also, use the new buffer size
dynamically computed instead of the compile time one.

Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>