- 24 Jul, 2021 16 commits
-
-
Linus Torvalds authored
Merge misc mm fixes from Andrew Morton: "15 patches. VM subsystems affected by this patch series: userfaultfd, kfence, highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and hugetlbfs" * akpm: hugetlbfs: fix mount mode command line processing mm: fix the deadlock in finish_fault() mm: mmap_lock: fix disabling preemption directly mm/secretmem: wire up ->set_page_dirty writeback, cgroup: do not reparent dax inodes writeback, cgroup: remove wb from offline list before releasing refcnt memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction mm: use kmap_local_page in memzero_page mm: call flush_dcache_page() in memcpy_to_page() and memzero_page() kfence: skip all GFP_ZONEMASK allocations kfence: move the size check to the beginning of __kfence_alloc() kfence: defer kfence_test_init to ensure that kunit debugfs is created selftest: use mmap instead of posix_memalign to allocate memory userfaultfd: do not untag user pointers
-
Mike Kravetz authored
In commit 32021982 ("hugetlbfs: Convert to fs_context") processing of the mount mode string was changed from match_octal() to fsparam_u32. This changed existing behavior as match_octal does not require octal values to have a '0' prefix, but fsparam_u32 does. Use fsparam_u32oct which provides the same behavior as match_octal. Link: https://lkml.kernel.org/r/20210721183326.102716-1-mike.kravetz@oracle.com Fixes: 32021982 ("hugetlbfs: Convert to fs_context") Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Reported-by:
Dennis Camera <bugs+kernel.org@dtnr.ch> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Qi Zheng authored
Commit 63f3655f ("mm, memcg: fix reclaim deadlock with writeback") fix the following ABBA deadlock by pre-allocating the pte page table without holding the page lock. lock_page(A) SetPageWriteback(A) unlock_page(A) lock_page(B) lock_page(B) pte_alloc_one shrink_page_list wait_on_page_writeback(A) SetPageWriteback(B) unlock_page(B) # flush A, B to clear the writeback Commit f9ce0be7 ("mm: Cleanup faultaround and finish_fault() codepaths") reworked the relevant code but ignored this race. This will cause the deadlock above to appear again, so fix it. Link: https://lkml.kernel.org/r/20210721074849.57004-1-zhengqi.arch@bytedance.com Fixes: f9ce0be7 ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by:
Qi Zheng <zhengqi.arch@bytedance.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Muchun Song authored
Commit 832b5072 ("mm: mmap_lock: use local locks instead of disabling preemption") fixed a bug by using local locks. But commit d01079f3 ("mm/mmap_lock: remove dead code for !CONFIG_TRACING configurations") changed those lines back to the original version. I guess it was introduced by fixing conflicts. Link: https://lkml.kernel.org/r/20210720074228.76342-1-songmuchun@bytedance.com Fixes: d01079f3 ("mm/mmap_lock: remove dead code for !CONFIG_TRACING configurations") Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Reviewed-by:
Yang Shi <shy828301@gmail.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta@ionos.com> Signed-off-by:
-
Mike Rapoport authored
Make secretmem up to date with the changes done in commit 0af57378 ("mm: require ->set_page_dirty to be explicitly wired up") so that unconditional call to this method won't cause crashes. Link: https://lkml.kernel.org/r/20210716063933.31633-1-rppt@kernel.org Fixes: 0af57378 ("mm: require ->set_page_dirty to be explicitly wired up") Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Roman Gushchin authored
The inode switching code is not suited for dax inodes. An attempt to switch a dax inode to a parent writeback structure (as a part of a writeback cleanup procedure) results in a panic like this: run fstests generic/270 at 2021-07-15 05:54:02 XFS (pmem0p2): EXPERIMENTAL big timestamp feature in use. Use at your own risk! XFS (pmem0p2): DAX enabled. Warning: EXPERIMENTAL, use at your own risk XFS (pmem0p2): EXPERIMENTAL inode btree counters feature in use. Use at your own risk! XFS (pmem0p2): Mounting V5 Filesystem XFS (pmem0p2): Ending clean mount XFS (pmem0p2): Quotacheck needed: Please wait. XFS (pmem0p2): Quotacheck: Done. XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) XFS (pmem0p2): xlog_verify_grant_tail: space > BBTOB(tail_blocks) BUG: unable to handle page fault for address: 0000000005b0f669 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 13 PID: 10479 Comm: kworker/13:16 Not tainted 5.14.0-rc1-master-8096acd7+ #8 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 09/13/2016 Workqueue: inode_switch_wbs inode_switch_wbs_work_fn RIP: 0010:inode_do_switch_wbs+0xaf/0x470 Code: 00 30 0f 85 c1 03 00 00 0f 1f 44 00 00 31 d2 48 c7 c6 ff ff ff ff 48 8d 7c 24 08 e8 eb 49 1a 00 48 85 c0 74 4a bb ff ff ff ff <48> 8b 50 08 48 8d 4a ff 83 e2 01 48 0f 45 c1 48 8b 00 a8 08 0f 85 RSP: 0018:ffff9c66691abdc8 EFLAGS: 00010002 RAX: 0000000005b0f661 RBX: 00000000ffffffff RCX: ffff89e6a21382b0 RDX: 0000000000000001 RSI: ffff89e350230248 RDI: ffffffffffffffff RBP: ffff89e681d19400 R08: 0000000000000000 R09: 0000000000000228 R10: ffffffffffffffff R11: ffffffffffffffc0 R12: ffff89e6a2138130 R13: ffff89e316af7400 R14: ffff89e316af6e78 R15: ffff89e6a21382b0 FS: 0000000000000000(0000) GS:ffff89ee5fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005b0f669 CR3: 0000000cb2410004 CR4: 00000000001706e0 Call Trace: inode_switch_wbs_work_fn+0xb6/0x2a0 process_one_work+0x1e6/0x380 worker_thread+0x53/0x3d0 kthread+0x10f/0x130 ret_from_fork+0x22/0x30 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_counter nf_tables nfnetlink bridge stp llc rfkill sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm mgag200 i2c_algo_bit iTCO_wdt irqbypass drm_kms_helper iTCO_vendor_support acpi_ipmi rapl syscopyarea sysfillrect intel_cstate ipmi_si sysimgblt ioatdma dax_pmem_compat fb_sys_fops ipmi_devintf device_dax i2c_i801 pcspkr intel_uncore hpilo nd_pmem cec dax_pmem_core dca i2c_smbus acpi_tad lpc_ich ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sd_mod t10_pi crct10dif_pclmul crc32_pclmul crc32c_intel tg3 ghash_clmulni_intel serio_raw hpsa hpwdt scsi_transport_sas wmi dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000005b0f669 ---[ end trace ed2105faff8384f3 ]--- RIP: 0010:inode_do_switch_wbs+0xaf/0x470 Code: 00 30 0f 85 c1 03 00 00 0f 1f 44 00 00 31 d2 48 c7 c6 ff ff ff ff 48 8d 7c 24 08 e8 eb 49 1a 00 48 85 c0 74 4a bb ff ff ff ff <48> 8b 50 08 48 8d 4a ff 83 e2 01 48 0f 45 c1 48 8b 00 a8 08 0f 85 RSP: 0018:ffff9c66691abdc8 EFLAGS: 00010002 RAX: 0000000005b0f661 RBX: 00000000ffffffff RCX: ffff89e6a21382b0 RDX: 0000000000000001 RSI: ffff89e350230248 RDI: ffffffffffffffff RBP: ffff89e681d19400 R08: 0000000000000000 R09: 0000000000000228 R10: ffffffffffffffff R11: ffffffffffffffc0 R12: ffff89e6a2138130 R13: ffff89e316af7400 R14: ffff89e316af6e78 R15: ffff89e6a21382b0 FS: 0000000000000000(0000) GS:ffff89ee5fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005b0f669 CR3: 0000000cb2410004 CR4: 00000000001706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x15200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The crash happens on an attempt to iterate over attached pagecache pages and check the dirty flag: a dax inode's xarray contains pfn's instead of generic struct page pointers. This happens for DAX and not for other kinds of non-page entries in the inodes because it's a tagged iteration, and shadow/swap entries are never tagged; only DAX entries get tagged. Fix the problem by bailing out (with the false return value) of inode_prepare_sbs_switch() if a dax inode is passed. [willy@infradead.org: changelog addition] Link: https://lkml.kernel.org/r/20210719171350.3876830-1-guro@fb.com Fixes: c22d70a1 ("writeback, cgroup: release dying cgwbs by switching attached inodes") Signed-off-by:
Roman Gushchin <guro@fb.com> Reported-by:
Murphy Zhou <jencce.kernel@gmail.com> Reported-by:
Darrick J. Wong <djwong@kernel.org> Tested-by:
-
Roman Gushchin authored
Boyang reported that the commit c22d70a1 ("writeback, cgroup: release dying cgwbs by switching attached inodes") causes the kernel to crash while running xfstests generic/256 on ext4 on aarch64 and ppc64le. run fstests generic/256 at 2021-07-12 05:41:40 EXT4-fs (vda3): mounted filesystem with ordered data mode. Opts: . Quota mode: none. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x96000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005 CM = 0, WnR = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=00000000b0502000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000005 [#1] SMP Modules linked in: dm_flakey dm_snapshot dm_bufio dm_zero dm_mod loop tls rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc ext4 vfat fat mbcache jbd2 drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_blk virtio_net net_failover virtio_console failover virtio_mmio aes_neon_bs [last unloaded: scsi_debug] CPU: 0 PID: 408468 Comm: kworker/u8:5 Tainted: G X --------- --- 5.14.0-0.rc1.15.bx.el9.aarch64 #1 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: events_unbound cleanup_offline_cgwbs_workfn pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO BTYPE=--) pc : cleanup_offline_cgwbs_workfn+0x320/0x394 lr : cleanup_offline_cgwbs_workfn+0xe0/0x394 sp : ffff80001554fd10 x29: ffff80001554fd10 x28: 0000000000000000 x27: 0000000000000001 x26: 0000000000000000 x25: 00000000000000e0 x24: ffffd2a2fbe671a8 x23: ffff80001554fd88 x22: ffffd2a2fbe67198 x21: ffffd2a2fc25a730 x20: ffff210412bc3000 x19: ffff210412bc3280 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000030 x12: 0000000000000040 x11: ffff210481572238 x10: ffff21048157223a x9 : ffffd2a2fa276c60 x8 : ffff210484106b60 x7 : 0000000000000000 x6 : 000000000007d18a x5 : ffff210416a86400 x4 : ffff210412bc0280 x3 : 0000000000000000 x2 : ffff80001554fd88 x1 : ffff210412bc0280 x0 : 0000000000000003 Call trace: cleanup_offline_cgwbs_workfn+0x320/0x394 process_one_work+0x1f4/0x4b0 worker_thread+0x184/0x540 kthread+0x114/0x120 ret_from_fork+0x10/0x18 Code: d63f0020 97f99963 17ffffa6 f8588263 (f9400061) ---[ end trace e250fe289272792a ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x52a2e9fa0000 from 0xffff800010000000 PHYS_OFFSET: 0xfff0defca0000000 CPU features: 0x00200251,23200840 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- The problem happens when cgwb_release_workfn() races with cleanup_offline_cgwbs_workfn(): wb_tryget() in cleanup_offline_cgwbs_workfn() can be called after percpu_ref_exit() is cgwb_release_workfn(), which is basically a use-after-free error. Fix the problem by making removing the writeback structure from the offline list before releasing the percpu reference counter. It will guarantee that cleanup_offline_cgwbs_workfn() will not see and not access writeback structures which are about to be released. Link: https://lkml.kernel.org/r/20210716201039.3762203-1-guro@fb.com Fixes: c22d70a1 ("writeback, cgroup: release dying cgwbs by switching attached inodes") Signed-off-by:
Boyang Xue <bxue@redhat.com> Suggested-by:
Jan Kara <jack@suse.cz> Tested-by:
-
Mike Rapoport authored
Commit b10d6bca ("arch, drivers: replace for_each_membock() with for_each_mem_range()") didn't take into account that when there is movable_node parameter in the kernel command line, for_each_mem_range() would skip ranges marked with MEMBLOCK_HOTPLUG. The page table setup code in POWER uses for_each_mem_range() to create the linear mapping of the physical memory and since the regions marked as MEMORY_HOTPLUG are skipped, they never make it to the linear map. A later access to the memory in those ranges will fail: BUG: Unable to handle kernel data access on write at 0xc000000400000000 Faulting instruction address: 0xc00000000008a3c0 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 53 Comm: kworker/u2:0 Not tainted 5.13.0 #7 NIP: c00000000008a3c0 LR: c0000000003c1ed8 CTR: 0000000000000040 REGS: c000000008a57770 TRAP: 0300 Not tainted (5.13.0) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 84222202 XER: 20040000 CFAR: c0000000003c1ed4 DAR: c000000400000000 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000003c1ed8 c000000008a57a10 c0000000019da700 c000000400000000 GPR04: 0000000000000280 0000000000000180 0000000000000400 0000000000000200 GPR08: 0000000000000100 0000000000000080 0000000000000040 0000000000000300 GPR12: 0000000000000380 c000000001bc0000 c0000000001660c8 c000000006337e00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000040000000 0000000020000000 c000000001a81990 c000000008c30000 GPR24: c000000008c20000 c000000001a81998 000fffffffff0000 c000000001a819a0 GPR28: c000000001a81908 c00c000001000000 c000000008c40000 c000000008a64680 NIP clear_user_page+0x50/0x80 LR __handle_mm_fault+0xc88/0x1910 Call Trace: __handle_mm_fault+0xc44/0x1910 (unreliable) handle_mm_fault+0x130/0x2a0 __get_user_pages+0x248/0x610 __get_user_pages_remote+0x12c/0x3e0 get_arg_page+0x54/0xf0 copy_string_kernel+0x11c/0x210 kernel_execve+0x16c/0x220 call_usermodehelper_exec_async+0x1b0/0x2f0 ret_from_kernel_thread+0x5c/0x70 Instruction dump: 79280fa4 79271764 79261f24 794ae8e2 7ca94214 7d683a14 7c893a14 7d893050 7d4903a6 60000000 60000000 60000000 <7c001fec> 7c091fec 7c081fec 7c051fec ---[ end trace 490b8c67e6075e09 ]--- Making for_each_mem_range() include MEMBLOCK_HOTPLUG regions in the traversal fixes this issue. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1976100 Link: https://lkml.kernel.org/r/20210712071132.20902-1-rppt@kernel.org Fixes: b10d6bca ("arch, drivers: replace for_each_membock() with for_each_mem_range()") Signed-off-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
-
Sergei Trofimovich authored
To reproduce the failure we need the following system: - kernel command: page_poison=1 init_on_free=0 init_on_alloc=0 - kernel config: * CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y * CONFIG_INIT_ON_FREE_DEFAULT_ON=y * CONFIG_PAGE_POISONING=y Resulting in: 0000000085629bdd: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 0000000022861832: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000000c597f5b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 11 PID: 15195 Comm: bash Kdump: loaded Tainted: G U O 5.13.1-gentoo-x86_64 #1 Hardware name: System manufacturer System Product Name/PRIME Z370-A, BIOS 2801 01/13/2021 Call Trace: dump_stack+0x64/0x7c __kernel_unpoison_pages.cold+0x48/0x84 post_alloc_hook+0x60/0xa0 get_page_from_freelist+0xdb8/0x1000 __alloc_pages+0x163/0x2b0 __get_free_pages+0xc/0x30 pgd_alloc+0x2e/0x1a0 mm_init+0x185/0x270 dup_mm+0x6b/0x4f0 copy_process+0x190d/0x1b10 kernel_clone+0xba/0x3b0 __do_sys_clone+0x8f/0xb0 do_syscall_64+0x68/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Before commit 51cba1eb ("init_on_alloc: Optimize static branches") init_on_alloc never enabled static branch by default. It could only be enabed explicitly by init_mem_debugging_and_hardening(). But after commit 51cba1eb, a static branch could already be enabled by default. There was no code to ever disable it. That caused page_poison=1 / init_on_free=1 conflict. This change extends init_mem_debugging_and_hardening() to also disable static branch disabling. Link: https://lkml.kernel.org/r/20210714031935.4094114-1-keescook@chromium.org Link: https://lore.kernel.org/r/20210712215816.1512739-1-slyfox@gentoo.org Fixes: 51cba1eb ("init_on_alloc: Optimize static branches") Signed-off-by:Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Co-developed-by:
Mikhail Morfikov <mmorfikov@gmail.com> Reported-by: <bowsingbetee@pm.me> Tested-by: <bowsingbetee@protonmail.com> Reviewed-by:
-
Christoph Hellwig authored
The commit message introducing the global memzero_page explicitly mentions switching to kmap_local_page in the commit log but doesn't actually do that. Link: https://lkml.kernel.org/r/20210713055231.137602-3-hch@lst.de Fixes: 28961998 ("iov_iter: lift memzero_page() to highmem.h") Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
-
Christoph Hellwig authored
memcpy_to_page and memzero_page can write to arbitrary pages, which could be in the page cache or in high memory, so call flush_kernel_dcache_pages to flush the dcache. This is a problem when using these helpers on dcache challeneged architectures. Right now there are just a few users, chances are no one used the PC floppy driver, the aha1542 driver for an ISA SCSI HBA, and a few advanced and optional btrfs and ext4 features on those platforms yet since the conversion. Link: https://lkml.kernel.org/r/20210713055231.137602-2-hch@lst.de Fixes: bb90d4bc ("mm/highmem: Lift memcpy_[to|from]_page to core") Fixes: 28961998 ("iov_iter: lift memzero_page() to highmem.h") Signed-off-by:
-
Alexander Potapenko authored
Allocation requests outside ZONE_NORMAL (MOVABLE, HIGHMEM or DMA) cannot be fulfilled by KFENCE, because KFENCE memory pool is located in a zone different from the requested one. Because callers of kmem_cache_alloc() may actually rely on the allocation to reside in the requested zone (e.g. memory allocations done with __GFP_DMA must be DMAable), skip all allocations done with GFP_ZONEMASK and/or respective SLAB flags (SLAB_CACHE_DMA and SLAB_CACHE_DMA32). Link: https://lkml.kernel.org/r/20210714092222.1890268-2-glider@google.com Fixes: 0ce20dd8 ("mm: add Kernel Electric-Fence infrastructure") Signed-off-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
Marco Elver <elver@google.com> Acked-by:
Souptick Joarder <jrdr.linux@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: <stable@vger.kernel.org> [5.12+] Signed-off-by:
-
Alexander Potapenko authored
Check the allocation size before toggling kfence_allocation_gate. This way allocations that can't be served by KFENCE will not result in waiting for another CONFIG_KFENCE_SAMPLE_INTERVAL without allocating anything. Link: https://lkml.kernel.org/r/20210714092222.1890268-1-glider@google.comSigned-off-by:
-
Weizhao Ouyang authored
kfence_test_init and kunit_init both use the same level late_initcall, which means if kfence_test_init linked ahead of kunit_init, kfence_test_init will get a NULL debugfs_rootdir as parent dentry, then kfence_test_init and kfence_debugfs_init both create a debugfs node named "kfence" under debugfs_mount->mnt_root, and it will throw out "debugfs: Directory 'kfence' with parent '/' already present!" with EEXIST. So kfence_test_init should be deferred. Link: https://lkml.kernel.org/r/20210714113140.2949995-1-o451686892@gmail.comSigned-off-by:
Weizhao Ouyang <o451686892@gmail.com> Tested-by:
-
Peter Collingbourne authored
This test passes pointers obtained from anon_allocate_area to the userfaultfd and mremap APIs. This causes a problem if the system allocator returns tagged pointers because with the tagged address ABI the kernel rejects tagged addresses passed to these APIs, which would end up causing the test to fail. To make this test compatible with such system allocators, stop using the system allocator to allocate memory in anon_allocate_area, and instead just use mmap. Link: https://lkml.kernel.org/r/20210714195437.118982-3-pcc@google.com Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241 Fixes: c47174fc ("userfaultfd: selftest") Co-developed-by:
Lokesh Gidra <lokeshgidra@google.com> Signed-off-by:
Peter Collingbourne <pcc@google.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Alistair Delva <adelva@google.com> Cc: William McVicker <willmcvicker@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by:
-
Peter Collingbourne authored
Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde2373 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d032574 ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c603 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by:
Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by:
-
- 23 Jul, 2021 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A few fixes and one patch to help some block layer API cleanups: - skip missing device when running fstrim - fix unpersisted i_size on fsync after expanding truncate - fix lock inversion problem when doing qgroup extent tracing - replace bdgrab/bdput usage, replace gendisk by block_device" * tag 'for-5.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: store a block_device in struct btrfs_ordered_extent btrfs: fix lock inversion problem when doing qgroup extent tracing btrfs: check for missing device in btrfs_trim_fs btrfs: fix unpersisted i_size on fsync after expanding truncate
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "A subtle deadlock on lock_rwsem (marked for stable) and rbd fixes for a -rc1 regression. Also included a rare WARN condition tweak" * tag 'ceph-for-5.14-rc3' of git://github.com/ceph/ceph-client: rbd: resurrect setting of disk->private_data in rbd_init_disk() ceph: don't WARN if we're still opening a session to an MDS rbd: don't hold lock_rwsem while running_list is being drained rbd: always kick acquire on "acquired" and "released" notifications
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: - Fix deadloop in ring buffer because of using stale "read" variable - Fix synthetic event use of field_pos as boolean and not an index - Fixed histogram special var "cpu" overriding event fields called "cpu" - Cleaned up error prone logic in alloc_synth_event() - Removed call to synchronize_rcu_tasks_rude() when not needed - Removed redundant initialization of a local variable "ret" - Fixed kernel crash when updating tracepoint callbacks of different priorities. * tag 'trace-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoints: Update static_call before tp_funcs when adding a tracepoint ftrace: Remove redundant initialization of variable ret ftrace: Avoid synchronize_rcu_tasks_rude() call when not necessary tracing: Clean up alloc_synth_event() tracing/histogram: Rename "cpu" to "common_cpu" tracing: Synthetic event field_pos is an index not a boolean tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fix from Geert Uytterhoeven: - Fix a Mac defconfig regression due to the IDE -> ATA switch * tag 'm68k-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: MAC should select HAVE_PATA_PLATFORM
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix a recently broken Kconfig dependency and ACPI device reference counting in an iterator macro. Specifics: - Fix recently broken Kconfig dependency for the ACPI table override via built-in initrd (Robert Richter) - Fix ACPI device reference counting in the for_each_acpi_dev_match() helper macro to avoid use-after-free (Andy Shevchenko)" * tag 'acpi-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: utils: Fix reference counting in for_each_acpi_dev_match() ACPI: Kconfig: Fix table override from built-in initrd -
Linus Torvalds authored
Merge tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two small driver core fixes to resolve some reported problems for 5.14-rc3. They include: - aux bus memory leak fix - unneeded warning message removed when removing a device link. Both have been in linux-next with no reported problems" * tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Prevent warning when removing a device link from unregistered consumer driver core: auxiliary bus: Fix memory leak when driver_register() fail
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes for 5.14-rc3. Included in here are: - MAINTAINERS file updates for two changes in different driver subsystems - mhi bus bugfixes - nds32 bugfix that resolves a reported problem All have been in linux-next with no reported problems" * tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nds32: fix up stack guard gap MAINTAINERS: Change ACRN HSM driver maintainer MAINTAINERS: Update for VMCI driver bus: mhi: pci_generic: Fix inbound IPCR channel bus: mhi: core: Validate channel ID when processing command completions bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny problems reported. Included in here are: - dtsi revert to resolve a problem which broke android systems that relied on the dts name to find the USB controller device. People are still working out the "real" solution for this, but for now the revert is needed. - core USB fix for pipe calculation found by syzbot - typec fixes - gadget driver fixes - new usb-serial device ids - new USB quirks - xhci fixes - usb hub fixes for power management issues reported - other tiny fixes All have been in linux-next with no reported problems" * tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name" usb: dwc2: gadget: Fix sending zero length packet in DDMA mode. usb: dwc2: Skip clock gating on Samsung SoCs usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode. usb: phy: Fix page fault from usb_phy_uevent usb: xhci: avoid renesas_usb_fw.mem when it's unusable usb: gadget: u_serial: remove WARN_ON on null port usb: dwc3: avoid NULL access of usb_gadget_driver usb: max-3421: Prevent corruption of freed memory usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970 usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes usb: typec: stusb160x: register role switch before interrupt registration USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI usb: hub: Disable USB 3 device initiated lpm if exit latency is too high ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly covering device-specific regressions and bugs over ASoC, HD-audio and USB-audio, while the ALSA PCM core received a few additional fixes for the possible (new and old) regressions" * tag 'sound-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: usb-audio: Add registration quirk for JBL Quantum headsets ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10 ALSA: pcm: Fix mmap without buffer preallocation ALSA: pcm: Fix mmap capability check ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID ASoC: ti: j721e-evm: Check for not initialized parent_clk_id ASoC: ti: j721e-evm: Fix unbalanced domain activity tracking during startup ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine ALSA: hdmi: Expose all pins on MSI MS-7C94 board ALSA: sb: Fix potential ABBA deadlock in CSP driver ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend ASoC: amd: reverse stop sequence for stoneyridge platform ASoC: soc-pcm: add a flag to reverse the stop sequence ASoC: codecs: wcd938x: setup irq during component bind ASoC: dt-bindings: renesas: rsnd: Fix incorrect 'port' regex schema ALSA: usb-audio: Add missing proc text entry for BESPOKEN type ASoC: codecs: wcd938x: make sdw dependency explicit in Kconfig ASoC: SOF: Intel: Update ADL descriptor to use ACPI power states ASoC: rt5631: Fix regcache sync errors on resume ALSA: pcm: Call substream ack() method upon compat mmap commit ...
-
Rafael J. Wysocki authored
* acpi-utils: ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
-
Steven Rostedt (VMware) authored
Because of the significant overhead that retpolines pose on indirect calls, the tracepoint code was updated to use the new "static_calls" that can modify the running code to directly call a function instead of using an indirect caller, and this function can be changed at runtime. In the tracepoint code that calls all the registered callbacks that are attached to a tracepoint, the following is done: it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs); if (it_func_ptr) { __data = (it_func_ptr)->data; static_call(tp_func_##name)(__data, args); } If there's just a single callback, the static_call is updated to just call that callback directly. Once another handler is added, then the static caller is updated to call the iterator, that simply loops over all the funcs in the array and calls each of the callbacks like the old method using indirect calling. The issue was discovered with a race between updating the funcs array and updating the static_call. The funcs array was updated first and then the static_call was updated. This is not an issue as long as the first element in the old array is the same as the first element in the new array. But that assumption is incorrect, because callbacks also have a priority field, and if there's a callback added that has a higher priority than the callback on the old array, then it will become the first callback in the new array. This means that it is possible to call the old callback with the new callback data element, which can cause a kernel panic. static_call = callback1() funcs[] = {callback1,data1}; callback2 has higher priority than callback1 CPU 1 CPU 2 ----- ----- new_funcs = {callback2,data2}, {callback1,data1} rcu_assign_pointer(tp->funcs, new_funcs); /* * Now tp->funcs has the new array * but the static_call still calls callback1 */ it_func_ptr = tp->funcs [ new_funcs ] data = it_func_ptr->data [ data2 ] static_call(callback1, data); /* Now callback1 is called with * callback2's data */ [ KERNEL PANIC ] update_static_call(iterator); To prevent this from happening, always switch the static_call to the iterator before assigning the tp->funcs to the new array. The iterator will always properly match the callback with its data. To trigger this bug: In one terminal: while :; do hackbench 50; done In another terminal echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable while :; do echo 1 > /sys/kernel/tracing/set_event_pid; sleep 0.5 echo 0 > /sys/kernel/tracing/set_event_pid; sleep 0.5 done And it doesn't take long to crash. This is because the set_event_pid adds a callback to the sched_waking tracepoint with a high priority, which will be called before the sched_waking trace event callback is called. Note, the removal to a single callback updates the array first, before changing the static_call to single callback, which is the proper order as the first element in the array is the same as what the static_call is being changed to. Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Fixes: d25e37d8 ("tracepoint: Optimize using static_call()") Reported-by:Stefan Metzmacher <metze@samba.org> tested-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Link: https://lkml.kernel.org/r/20210721120915.122278-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nicolas Saenz Julienne authored
synchronize_rcu_tasks_rude() triggers IPIs and forces rescheduling on all CPUs. It is a costly operation and, when targeting nohz_full CPUs, very disrupting (hence the name). So avoid calling it when 'old_hash' doesn't need to be freed. Link: https://lkml.kernel.org/r/20210721114726.1545103-1-nsaenzju@redhat.comSigned-off-by:
Nicolas Saenz Julienne <nsaenzju@redhat.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
alloc_synth_event() currently has the following code to initialize the event fields and dynamic_fields: for (i = 0, j = 0; i < n_fields; i++) { event->fields[i] = fields[i]; if (fields[i]->is_dynamic) { event->dynamic_fields[j] = fields[i]; event->dynamic_fields[j]->field_pos = i; event->dynamic_fields[j++] = fields[i]; event->n_dynamic_fields++; } } 1) It would make more sense to have all fields keep track of their field_pos. 2) event->dynmaic_fields[j] is assigned twice for no reason. 3) We can move updating event->n_dynamic_fields outside the loop, and just assign it to j. This combination makes the code much cleaner. Link: https://lkml.kernel.org/r/20210721195341.29bb0f77@oasis.local.homeSigned-off-by: -
Steven Rostedt (VMware) authored
Currently the histogram logic allows the user to write "cpu" in as an event field, and it will record the CPU that the event happened on. The problem with this is that there's a lot of events that have "cpu" as a real field, and using "cpu" as the CPU it ran on, makes it impossible to run histograms on the "cpu" field of events. For example, if I want to have a histogram on the count of the workqueue_queue_work event on its cpu field, running: ># echo 'hist:keys=cpu' > events/workqueue/workqueue_queue_work/trigger Gives a misleading and wrong result. Change the command to "common_cpu" as no event should have "common_*" fields as that's a reserved name for fields used by all events. And this makes sense here as common_cpu would be a field used by all events. Now we can even do: ># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger ># cat events/workqueue/workqueue_queue_work/hist # event histogram # # trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active] # { common_cpu: 0, cpu: 2 } hitcount: 1 { common_cpu: 0, cpu: 4 } hitcount: 1 { common_cpu: 7, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 7 } hitcount: 1 { common_cpu: 0, cpu: 1 } hitcount: 1 { common_cpu: 0, cpu: 6 } hitcount: 2 { common_cpu: 0, cpu: 5 } hitcount: 2 { common_cpu: 1, cpu: 1 } hitcount: 4 { common_cpu: 6, cpu: 6 } hitcount: 4 { common_cpu: 5, cpu: 5 } hitcount: 14 { common_cpu: 4, cpu: 4 } hitcount: 26 { common_cpu: 0, cpu: 0 } hitcount: 39 { common_cpu: 2, cpu: 2 } hitcount: 184 Now for backward compatibility, I added a trick. If "cpu" is used, and the field is not found, it will fall back to "common_cpu" and work as it did before. This way, it will still work for old programs that use "cpu" to get the actual CPU, but if the event has a "cpu" as a field, it will get that event's "cpu" field, which is probably what it wants anyway. I updated the tracefs/README to include documentation about both the common_timestamp and the common_cpu. This way, if that text is present in the README, then an application can know that common_cpu is supported over just plain "cpu". Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 8b7622bf ("tracing: Add cpu field for hist triggers") Reviewed-by:Tom Zanussi <zanussi@kernel.org> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
Performing the following: ># echo 'wakeup_lat s32 pid; u64 delta; char wake_comm[]' > synthetic_events ># echo 'hist:keys=pid:__arg__1=common_timestamp.usecs' > events/sched/sched_waking/trigger ># echo 'hist:keys=next_pid:pid=next_pid,delta=common_timestamp.usecs-$__arg__1:onmatch(sched.sched_waking).trace(wakeup_lat,$pid,$delta,prev_comm)'\ > events/sched/sched_switch/trigger ># echo 1 > events/synthetic/enable Crashed the kernel: BUG: kernel NULL pointer dereference, address: 000000000000001b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.13.0-rc5-test+ #104 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strlen+0x0/0x20 Code: f6 82 80 2b 0b bc 20 74 11 0f b6 50 01 48 83 c0 01 f6 82 80 2b 0b bc 20 75 ef c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 9 f8 c3 31 RSP: 0018:ffffaa75000d79d0 EFLAGS: 00010046 RAX: 0000000000000002 RBX: ffff9cdb55575270 RCX: 0000000000000000 RDX: ffff9cdb58c7a320 RSI: ffffaa75000d7b40 RDI: 000000000000001b RBP: ffffaa75000d7b40 R08: ffff9cdb40a4f010 R09: ffffaa75000d7ab8 R10: ffff9cdb4398c700 R11: 0000000000000008 R12: ffff9cdb58c7a320 R13: ffff9cdb55575270 R14: ffff9cdb58c7a000 R15: 0000000000000018 FS: 0000000000000000(0000) GS:ffff9cdb5aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001b CR3: 00000000c0612006 CR4: 00000000001706e0 Call Trace: trace_event_raw_event_synth+0x90/0x1d0 action_trace+0x5b/0x70 event_hist_trigger+0x4bd/0x4e0 ? cpumask_next_and+0x20/0x30 ? update_sd_lb_stats.constprop.0+0xf6/0x840 ? __lock_acquire.constprop.0+0x125/0x550 ? find_held_lock+0x32/0x90 ? sched_clock_cpu+0xe/0xd0 ? lock_release+0x155/0x440 ? update_load_avg+0x8c/0x6f0 ? enqueue_entity+0x18a/0x920 ? __rb_reserve_next+0xe5/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 event_triggers_call+0x52/0xe0 trace_event_buffer_commit+0x1ae/0x240 trace_event_raw_event_sched_switch+0x114/0x170 __traceiter_sched_switch+0x39/0x50 __schedule+0x431/0xb00 schedule_idle+0x28/0x40 do_idle+0x198/0x2e0 cpu_startup_entry+0x19/0x20 secondary_startup_64_no_verify+0xc2/0xcb The reason is that the dynamic events array keeps track of the field position of the fields array, via the field_pos variable in the synth_field structure. Unfortunately, that field is a boolean for some reason, which means any field_pos greater than 1 will be a bug (in this case it was 2). Link: https://lkml.kernel.org/r/20210721191008.638bce34@oasis.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: bd82631d ("tracing: Add support for dynamic strings to synthetic events") Reviewed-by: -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular fixes - a bunch of amdgpu fixes are the main thing mostly for the new gpus. There is also some i915 reverts for older changes that were having some unwanted side effects. One nouveau fix for a report regressions, and otherwise just some misc fixes. core: - fix for non-drm ioctls on drm fd panel: - avoid double free ttm: - refcounting fix - NULL checks amdgpu: - Yellow Carp updates - Add some Yellow Carp DIDs - Beige Goby updates - CIK 10bit 4K regression fix - GFX10 golden settings updates - eDP panel regression fix - Misc display fixes - Aldebaran fix - fix COW checks nouveau: - init BO GEM fields i915: - revert async command parsing - revert fence error propogation - GVT fix for shadow ppgtt vc4: - fix interrupt handling" * tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm: (34 commits) drm/panel: raspberrypi-touchscreen: Prevent double-free drm/amdgpu - Corrected the video codecs array name for yellow carp drm/amd/display: Fix ASSR regression on embedded panels drm/amdgpu: add yellow carp pci id (v2) drm/amdgpu: update yellow carp external rev_id handling drm/amd/pm: Support board calibration on aldebaran drm/amd/display: change zstate allow msg condition drm/amd/display: Populate dtbclk entries for dcn3.02/3.03 drm/amd/display: Line Buffer changes drm/amd/display: Remove MALL function from DCN3.1 drm/amd/display: Only set default brightness for OLED drm/amd/display: Update bounding box for DCN3.1 drm/amd/display: Query VCO frequency from register for DCN3.1 drm/amd/display: Populate socclk entries for dcn3.02/3.03 drm/amd/display: Fix max vstartup calculation for modes with borders drm/amd/display: implement workaround for riommu related hang drm/amd/display: Fix comparison error in dcn21 DML drm/i915: Correct the docs for intel_engine_cmd_parser drm/ttm: add missing NULL checks drm/ttm: Force re-init if ttm_global_init() fails ...
-
Linus Torvalds authored
Merge tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fix from Gustavo Silva: "Fix a fall-through warning when building with -Wimplicit-fallthrough on PowerPC" * tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: powerpc/pasemi: Fix fall-through warning for Clang
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull: * Return -ENOTTY for non-DRM ioctls * amdgpu: Fix COW checks * nouveau: init BO GME fields * panel: Avoid double free * ttm: Fix refcounting in ttm_global_init(); NULL checks * vc4: Fix interrupt handling Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YPlbkmH6S4VAHP9j@linux-uq9g.fritz.box
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2021-07-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Couple reverts from Jason getting rid of asynchronous command parsing and fence error propagation and a GVT fix of shadow ppgtt invalidation with proper D3 state tracking from Colin. Signed-off-by:
-
- 22 Jul, 2021 4 commits
-
-
Linus Torvalds authored
Merge tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull array bounds warning fix from Gustavo Silva: "Fix a couple of out-of-bounds warnings in the media subsystem. This is part of the ongoing efforts to globally enable -Warray-bounds" * tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.14-rc3 Here are some new device ids and a device-id comment fix. All have been in linux-next with no reported issues. * tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick USB: serial: cp210x: fix comments for GE CS1000 USB: serial: option: add support for u-blox LARA-R6 family
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "A pair of arm64 fixes for -rc3. The straightforward one is a fix to our firmware calling stub, which accidentally started corrupting the link register on machines with SVE. Since these machines don't really exist yet, it wasn't spotted in -next. The other fix is a revert-and-a-bit of a patch originally intended to allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A side-effect of this change was that our pXd_set_huge() implementations could be replaced with generic dummy functions depending on the levels of page-table being used, which in turn broke the boot if we fail to create the linear mapping as a result of using these functions to operate on the pgd. Huge thanks to Michael Ellerman for modifying the revert so as not to regress PPC 8xx in terms of functionality. Anyway, that's the background and it's also available in the commit message along with Link tags pointing at all of the fun. Summary: - Fix hang when issuing SMC on SVE-capable system due to clobbered LR - Fix boot failure due to missing block mappings with folded page-table" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge" arm64: smccc: Save lr before calling __arm_smccc_sve_check() -
Linus Torvalds authored
Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - bug fix from Haiyang for vmbus CPU assignment - revert of a bogus patch that went into 5.14-rc1 * tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Revert "x86/hyperv: fix logical processor creation" Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
-
