- 09 Sep, 2015 12 commits
-
-
Al Viro authored
Followup to the UFS series - with the way we clear the new blocks (via buffer cache, possibly on more than a page worth of file) we really should not insert a reference to new block into inode block tree until after we'd cleared it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio updates from Michael Tsirkin: "Virtio fixes and features for 4.3: - virtio-mmio can now be auto-loaded through acpi. - virtio blk supports extended partitions. - total memory is better reported when using virtio balloon with auto-deflate. - cache control is re-enabled when using virtio-blk in modern mode" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: do not change memory amount visible via /proc/meminfo virtio_ballon: change stub of release_pages_by_pfn virtio-blk: Allow extended partitions virtio_mmio: add ACPI probing virtio-blk: use VIRTIO_BLK_F_WCE and VIRTIO_BLK_F_CONFIG_WCE in virtio1
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metagLinus Torvalds authored
Pull metag updates from James Hogan: "Metag architecture changes for v4.3. Just a couple of changes for v4.3-rc1. A preparatory IRQ patch to prepare for moving irq_data struct members, and a tweak to Documentation/features since Meta2 could support THP" * tag 'metag-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: Documentation/features/vm: Meta2 is capable of THP metag/irq: Use access helper irq_data_get_affinity_mask()
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 updates from Ley Foon Tan: - add defconfig and device tree for max 10 support - migrate to new 'set-state' interface for timer - fix unaligned handler - MAINTAINERS: update nios2 git repo * tag 'nios2-v4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: add Max10 defconfig nios2: Add Max10 device tree MAINTAINERS: update nios2 git repo nios2: remove unused statistic counters nios2: fixed variable imm16 to s16 nios2/time: Migrate to new 'set-state' interface
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: "Small cifs fix and a patch for improved debugging" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix use-after-free on mid_q_entry Update cifs version number Add way to query server fs info for smb3
-
Ross Zwisler authored
As part of the v4.3 merge window the DAX code was updated by Matthew and Kirill to handle PMD pages. Also as part of the v4.3 merge window we updated the DAX code to do proper PMEM flushing (commit 2765cfbb: "dax: update I/O path to do proper PMEM flushing"). The additional code added by the DAX PMD patches also needs to be updated to properly use the PMEM API. This ensures that after a PMD fault is handled the zeros written to the newly allocated pages are durable on the DIMMs. linux/dax.h is included to get rid of a bunch of sparse warnings. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <willy@linux.intel.com>, Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill Shutemov <kirill@shutemov.name> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull inifiniband/rdma updates from Doug Ledford: "This is a fairly sizeable set of changes. I've put them through a decent amount of testing prior to sending the pull request due to that. There are still a few fixups that I know are coming, but I wanted to go ahead and get the big, sizable chunk into your hands sooner rather than waiting for those last few fixups. Of note is the fact that this creates what is intended to be a temporary area in the drivers/staging tree specifically for some cleanups and additions that are coming for the RDMA stack. We deprecated two drivers (ipath and amso1100) and are waiting to hear back if we can deprecate another one (ehca). We also put Intel's new hfi1 driver into this area because it needs to be refactored and a transfer library created out of the factored out code, and then it and the qib driver and the soft-roce driver should all be modified to use that library. I expect drivers/staging/rdma to be around for three or four kernel releases and then to go away as all of the work is completed and final deletions of deprecated drivers are done. Summary of changes for 4.3: - Create drivers/staging/rdma - Move amso1100 driver to staging/rdma and schedule for deletion - Move ipath driver to staging/rdma and schedule for deletion - Add hfi1 driver to staging/rdma and set TODO for move to regular tree - Initial support for namespaces to be used on RDMA devices - Add RoCE GID table handling to the RDMA core caching code - Infrastructure to support handling of devices with differing read and write scatter gather capabilities - Various iSER updates - Kill off unsafe usage of global mr registrations - Update SRP driver - Misc mlx4 driver updates - Support for the mr_alloc verb - Support for a netlink interface between kernel and user space cache daemon to speed path record queries and route resolution - Ininitial support for safe hot removal of verbs devices" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (136 commits) IB/ipoib: Suppress warning for send only join failures IB/ipoib: Clean up send-only multicast joins IB/srp: Fix possible protection fault IB/core: Move SM class defines from ib_mad.h to ib_smi.h IB/core: Remove unnecessary defines from ib_mad.h IB/hfi1: Add PSM2 user space header to header_install IB/hfi1: Add CSRs for CONFIG_SDMA_VERBOSITY mlx5: Fix incorrect wc pkey_index assignment for GSI messages IB/mlx5: avoid destroying a NULL mr in reg_user_mr error flow IB/uverbs: reject invalid or unknown opcodes IB/cxgb4: Fix if statement in pick_local_ip6adddrs IB/sa: Fix rdma netlink message flags IB/ucma: HW Device hot-removal support IB/mlx4_ib: Disassociate support IB/uverbs: Enable device removal when there are active user space applications IB/uverbs: Explicitly pass ib_dev to uverbs commands IB/uverbs: Fix race between ib_uverbs_open and remove_one IB/uverbs: Fix reference counting usage of event files IB/core: Make ib_dealloc_pd return void IB/srp: Create an insecure all physical rkey only if needed ...
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Most of these have been sitting in linux-next for more than a release, particularly commit 0fbcf4af ("ipmi: Convert the IPMI SI ACPI handling to a platform device") which is probably the most complex patch. That is also the one that changes drivers/acpi/acpi_pnp.c. The change in that file is only removing IPMI from a "special platform devices" list, since I convert it to the standard PNP interface. I posted this one to the ACPI list twice and got no response, and it seems to work well in my testing, so I'm hoping it's good. Hidehiro Kawai posted a set of changes that improves the panic time handling in the IPMI driver. The rest of the changes are minor bug fixes or cleanups and some documentation" * tag 'for-linus-4.3' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi:ssif: Add a module parm to specify that SMBus alerts don't work ipmi: add of_device_id in MODULE_DEVICE_TABLE ipmi: Compensate for BMCs that wont set the irq enable bit ipmi: Don't call receive handler in the panic context ipmi: Avoid touching possible corrupted lists in the panic context ipmi: Don't flush messages in sender() in run-to-completion mode ipmi: Factor out message flushing procedure ipmi: Remove unneeded set_run_to_completion call ipmi: Make some data const that was only read ipmi: constify SSIF ACPI device ids ipmi: Delete an unnecessary check before the function call "cleanup_one_si" char:ipmi - Change 1 to true for bool type variables during initialization. impi:Remove unneeded setting of module owner to THIS_MODULE in the platform structure, powernv_ipmi_driver ipmi: Add a comment in how messages are delivered from the lower layer ipmi/powernv: Fix potential invalid pointer dereference ipmi: Convert the IPMI SI ACPI handling to a platform device ipmi: Add device tree bindings information
-
Linus Torvalds authored
Merge second patch-bomb from Andrew Morton: "Almost all of the rest of MM. There was an unusually large amount of MM material this time" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits) zpool: remove no-op module init/exit mm: zbud: constify the zbud_ops mm: zpool: constify the zpool_ops mm: swap: zswap: maybe_preload & refactoring zram: unify error reporting zsmalloc: remove null check from destroy_handle_cache() zsmalloc: do not take class lock in zs_shrinker_count() zsmalloc: use class->pages_per_zspage zsmalloc: consider ZS_ALMOST_FULL as migrate source zsmalloc: partial page ordering within a fullness_list zsmalloc: use shrinker to trigger auto-compaction zsmalloc: account the number of compacted pages zsmalloc/zram: introduce zs_pool_stats api zsmalloc: cosmetic compaction code adjustments zsmalloc: introduce zs_can_compact() function zsmalloc: always keep per-class stats zsmalloc: drop unused variable `nr_to_migrate' mm/memblock.c: fix comment in __next_mem_range() mm/page_alloc.c: fix type information of memoryless node memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: "The most important changes in this patchset are: - re-enable 64bit PCI bus addresses which were temporarily disabled for PA-RISC in kernel 4.2 - fix the 64bit CAS operation in the LWS path which now enables us to enable the 64bit gcc atomic builtins even on 32bit userspace with 64bit kernel - fix a long-standing bug which sometimes crashed kernel at bootup while serial interrupt wasn't registered yet" * 'parisc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use platform_device_register_simple("rtc-generic") parisc: Drop CONFIG_SMP around update_cr16_clocksource() parisc: Use double word condition in 64bit CAS operation parisc: Filter out spurious interrupts in PA-RISC irq handler parisc: Additionally check for in_atomic() in page fault handler PCI,parisc: Enable 64-bit bus addresses on PA-RISC parisc: Define ioremap_uc and ioremap_wc
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "This update adds new zram test and fixes to problems found during testing this new zram test. In addition, there are a few bug fixes and ksefltest improvement patches from Linaro developers. I will send another update later on this week to fix kselftest breakage due to commit 2bf9e0ab ("locking/static_keys: Provide a selftest") after the fix soaks in next for a couple of days" * tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/zram: Makefile fix selftests/zram: must be run as root selftests: breakpoints: fix installing error on the architecture except x86 selftests: check before install selftests/zram: Adding zram tests
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu updates for from Joerg Roedel: "This time the IOMMU updates are mostly cleanups or fixes. No big new features or drivers this time. In particular the changes include: - Bigger cleanup of the Domain<->IOMMU data structures and the code that manages them in the Intel VT-d driver. This makes the code easier to understand and maintain, and also easier to keep the data structures in sync. It is also a preparation step to make use of default domains from the IOMMU core in the Intel VT-d driver. - Fixes for a couple of DMA-API misuses in ARM IOMMU drivers, namely in the ARM and Tegra SMMU drivers. - Fix for a potential buffer overflow in the OMAP iommu driver's debug code - A couple of smaller fixes and cleanups in various drivers - One small new feature: Report domain-id usage in the Intel VT-d driver to easier detect bugs where these are leaked" * tag 'iommu-updates-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (83 commits) iommu/vt-d: Really use upper context table when necessary x86/vt-d: Fix documentation of DRHD iommu/fsl: Really fix init section(s) content iommu/io-pgtable-arm: Unmap and free table when overwriting with block iommu/io-pgtable-arm: Move init-fn declarations to io-pgtable.h iommu/msm: Use BUG_ON instead of if () BUG() iommu/vt-d: Access iomem correctly iommu/vt-d: Make two functions static iommu/vt-d: Use BUG_ON instead of if () BUG() iommu/vt-d: Return false instead of 0 in irq_remapping_cap() iommu/amd: Use BUG_ON instead of if () BUG() iommu/amd: Make a symbol static iommu/amd: Simplify allocation in irq_remapping_alloc() iommu/tegra-smmu: Parameterize number of TLB lines iommu/tegra-smmu: Factor out tegra_smmu_set_pde() iommu/tegra-smmu: Extract tegra_smmu_pte_get_use() iommu/tegra-smmu: Use __GFP_ZERO to allocate zeroed pages iommu/tegra-smmu: Remove PageReserved manipulation iommu/tegra-smmu: Convert to use DMA API iommu/tegra-smmu: smmu_flush_ptc() wants device addresses ...
-
- 08 Sep, 2015 28 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap updates from Mark Brown: "This has been a busy release for regmap. By far the biggest set of changes here are those from Markus Pargmann which implement support for block transfers in smbus devices. This required quite a bit of refactoring but leaves us better able to handle odd restrictions that controllers may have and with better performance on smbus. Other new features include: - Fix interactions with lockdep for nested regmaps (eg, when a device using regmap is connected to a bus where the bus controller has a separate regmap). Lockdep's default class identification is too crude to work without help. - Support for must write bitfield operations, useful for operations which require writing a bit to trigger them from Kuniori Morimoto. - Support for delaying during register patch application from Nariman Poushin. - Support for overriding cache state via the debugfs implementation from Richard Fitzgerald" * tag 'regmap-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (25 commits) regmap: fix a NULL pointer dereference in __regmap_init regmap: Support bulk reads for devices without raw formatting regmap-i2c: Add smbus i2c block support regmap: Add raw_write/read checks for max_raw_write/read sizes regmap: regmap max_raw_read/write getter functions regmap: Introduce max_raw_read/write for regmap_bulk_read/write regmap: Add missing comments about struct regmap_bus regmap: No multi_write support if bus->write does not exist regmap: Split use_single_rw internally into use_single_read/write regmap: Fix regmap_bulk_write for bus writes regmap: regmap_raw_read return error on !bus->read regulator: core: Print at debug level on debugfs creation failure regmap: Fix regmap_can_raw_write check regmap: fix typos in regmap.c regmap: Fix integertypes for register address and value regmap: Move documentation to regmap.h regmap: Use different lockdep class for each regmap init call thermal: sti: Add parentheses around bridge->ops->regmap_init call mfd: vexpress: Add parentheses around bridge->ops->regmap_init call regmap: debugfs: Fix misuse of IS_ENABLED ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev updates from Tomi Valkeinen: "Minor fixes and cleanups" * tag 'fbdev-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: video: fbdev: atmel_lcdfb: remove useless include video: fbdev: pxa168fb: Use devm_clk_get fbdev: ssd1307fb: fix error return code fbdev: fix snprintf() limit in show_bl_curve() video: fbdev: s3c-fb: Constify platform_device_id video: fbdev: atmel: fix warning for const return value video: fbdev: Drop owner assignment from platform_driver video: fbdev: Drop owner assignment from i2c_driver fbdev: remove unnecessary memset in vfb framebuffer: disable vgacon on microblaze arch fbdev: udlfb: remove unneeded initialization in few places fbdev: Allow compile test of GPIO consumers if !GPIOLIB fbdev: fix cea_modes array size
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC updates from Ulf Hansson: "MMC core: - Fix a race condition in the request handling - Skip trim commands for some buggy kingston eMMCs - An optimization and a correction for erase groups - Set CMD23 quirk for some Sandisk cards MMC host: - sdhci: Give GPIO CD higher precedence and don't poll when it's used - sdhci: Fix DMA memory leakage - sdhci: Some updates for clock management - sdhci-of-at91: introduce driver for the Atmel SDMMC - sdhci-of-arasan: Add support for sdhci-5.1 - sdhci-esdhc-imx: Add support for imx7d which also supports HS400 - sdhci: A collection of fixes and improvements for various sdhci hosts - omap_hsmmc: Modernization of the regulator code - dw_mmc: A couple of fixes for DMA and PIO mode - usdhi6rol0: A few fixes and support probe deferral for regulators - pxamci: Convert to use dmaengine - sh_mmcif: Fix the suspend process in a short term solution - tmio: Adjust timeout for commands - sunxi: Fix timeout while gating/ungating clock" * tag 'mmc-v4.3' of git://git.linaro.org/people/ulf.hansson/mmc: (67 commits) mmc: android-goldfish: remove incorrect __iomem annotation mmc: core: fix race condition in mmc_wait_data_done mmc: host: omap_hsmmc: remove CONFIG_REGULATOR check mmc: host: omap_hsmmc: use ios->vdd for setting vmmc voltage mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status mmc: host: omap_hsmmc: enable/disable vmmc_aux regulator based on previous state mmc: host: omap_hsmmc: don't use ->set_power to set initial regulator state mmc: host: omap_hsmmc: avoid pbias regulator enable on power off mmc: host: omap_hsmmc: add separate function to set pbias mmc: host: omap_hsmmc: add separate functions for enable/disable supply mmc: host: omap_hsmmc: return error if any of the regulator APIs fail mmc: host: omap_hsmmc: remove unnecessary pbias set_voltage mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc mmc: host: omap_hsmmc: use the ocrmask provided by the vmmc regulator mmc: host: omap_hsmmc: cleanup omap_hsmmc_reg_get() mmc: host: omap_hsmmc: return on fatal errors from omap_hsmmc_reg_get mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc mmc: sdhci-of-at91: fix platform_no_drv_owner.cocci warnings mmc: sh_mmcif: Fix suspend process mmc: usdhi6rol0: fix error return code ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Significant work on toshiba_acpi, including new hardware support, refactoring, and cleanups. Extend device support for asus, ideapad, and acer systems. New surface pro 3 buttons driver. Misc minor cleanups for thinkpad and hp-wireless. acer-wmi: - No rfkill on HP Omen 15 wifi thinkpad_acpi: - Remove side effects from vdbg_printk -> no_printk macro surface pro 3: - Add support driver for Surface Pro 3 buttons hp-wireless: - remove unneeded goto/label in hpwl_init ideapad-laptop: - add alternative representation for Yoga 2 to DMI table - Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list asus-laptop: - Add key found on Asus F3M MAINTAINERS: - Remove Toshiba Linux mailing list address toshiba_acpi: - Bump driver version to 0.23 - Remove unnecessary checks and returns in HCI/SCI functions - Refactor *{get, set} functions return value - Remove "*not supported" feature prints - Change *available functions return type - Add set_fan_status function - Change some variables to avoid warnings from ninja-check - Reorder toshiba_acpi_alt_keymap entries - Remove unused wireless defines - Transflective backlight updates - Avoid registering input device on WMI event laptops - Add /dev/toshiba_acpi device - Adapt /proc/acpi/toshiba/keys to TOS1900 devices" * tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (21 commits) acer-wmi: No rfkill on HP Omen 15 wifi thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macro surface pro 3: Add support driver for Surface Pro 3 buttons hp-wireless: remove unneeded goto/label in hpwl_init ideapad-laptop: add alternative representation for Yoga 2 to DMI table asus-laptop: Add key found on Asus F3M MAINTAINERS: Remove Toshiba Linux mailing list address ideapad-laptop: Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list toshiba_acpi: Bump driver version to 0.23 toshiba_acpi: Remove unnecessary checks and returns in HCI/SCI functions toshiba_acpi: Refactor *{get, set} functions return value toshiba_acpi: Remove "*not supported" feature prints toshiba_acpi: Change *available functions return type toshiba_acpi: Add set_fan_status function toshiba_acpi: Change some variables to avoid warnings from ninja-check toshiba_acpi: Reorder toshiba_acpi_alt_keymap entries toshiba_acpi: Remove unused wireless defines toshiba_acpi: Transflective backlight updates toshiba_acpi: Avoid registering input device on WMI event laptops toshiba_acpi: Add /dev/toshiba_acpi device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Features: - new drivers: Renesas EMEV2, register based MUX, NXP LPC2xxx - core: scans DT and assigns wakeup interrupts. no driver changes needed. - core: some refcouting issues fixed and better API for that - core: new helper function for best effort block read emulation - slave framework: proper DT bindings and userspace instantiation - some bigger work for xiic, pxa, omap drivers .. and quite a number of smaller driver fixes, cleanups, improvements" * 'i2c/for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (65 commits) i2c: mux: reg Change ioread endianness for readback i2c: mux: reg: fix compilation warnings i2c: mux: reg: simplify register size checking i2c: muxes: fix leaked i2c adapter device node references i2c: allow specifying separate wakeup interrupt in device tree of/irq: export of_get_irq_byname() i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code i2c: Replace I2C_CROS_EC_TUNNEL dependency eeprom: at24: use i2c_smbus_read_i2c_block_data_or_emulated i2c: core: Add support for best effort block read emulation i2c: lpc2k: add driver i2c: mux: Add register-based mux i2c-mux-reg i2c: dt: describe generic bindings i2c: slave: print warning if slave flag not set i2c: support 10 bit and slave addresses in sysfs 'new_device' i2c: take address space into account when checking for used addresses i2c: apply DT flags when probing i2c: make address check indpendent from client struct i2c: rename address check functions i2c: apply address offset for slaves, too ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Core: - use is_visible() to control sysfs attributes - switch wakealarm attribute to DEVICE_ATTR_RW - make rtc_does_wakealarm() return boolean - properly manage lifetime of dev and cdev in rtc device - remove unnecessary device_get() in rtc_device_unregister - fix double free in rtc_register_device() error path New drivers: - NXP LPC24xx - Xilinx Zynq MP - Dialog DA9062 Subsystem wide cleanups: - fix drivers that consider 0 as a valid IRQ in client->irq - Drop (un)likely before IS_ERR(_OR_NULL) - drop the remaining owner assignment for i2c_driver and platform_driver - module autoload fixes Drivers: - 88pm80x: add device tree support - abx80x: fix RTC write bit - ab8500: Add a sentinel to ab85xx_rtc_ids[] - armada38x: Align RTC set time procedure with the official errata - as3722: correct month value - at91sam9: cleanups - at91rm9200: get and use slow clock and cleanups - bq32k: remove redundant check - cmos: century support, proper fix for the spurious wakeup - ds1307: cleanups and wakeup irq support - ds1374: Remove unused variable - ds1685: Use module_platform_driver - ds3232: fix WARNING trace in resume function - gemini: fix ptr_ret.cocci warnings - mt6397: implement suspend/resume - omap: support internal and external clock enabling - opal: Enable alarms only when opal supports tpo - pcf2127: use OFS flag to detect unreliable date and warn the user - pl031: fix typo for author email - rx8025: huge cleanup and fixes - sa1100/pxa: share common code - s5m: fix to update ctrl register - s3c: fix clocks and wakeup, cleanup - sirfsoc: use regmap - nvram_read()/nvram_write() functions for cmos, ds1305, ds1307, ds1343, ds1511, ds1553, ds1742, m48t59, rp5c01, stk17ta8, tx4939 - use rtc_valid_tm() error code when reading date/time instead of 0 for isl12022, pcf2123, pcf2127" * tag 'rtc-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (90 commits) rtc: abx80x: fix RTC write bit rtc: ab8500: Add a sentinel to ab85xx_rtc_ids[] rtc: ds1374: Remove unused variable rtc: Fix module autoload for OF platform drivers rtc: Fix module autoload for rtc-{ab8500,max8997,s5m} drivers rtc: omap: Add external clock enabling support rtc: omap: Add internal clock enabling support ARM: dts: AM437x: Add the internal and external clock nodes for rtc rtc: s5m: fix to update ctrl register rtc: add xilinx zynqmp rtc driver devicetree: bindings: rtc: add bindings for xilinx zynqmp rtc rtc: as3722: correct month value ARM: config: Switch PXA27x platforms to use PXA RTC driver ARM: mmp: remove unused RTC register definitions ARM: sa1100: remove unused RTC register definitions rtc: sa1100/pxa: convert to run-time register mapping ARM: pxa: add memory resource to SA1100 RTC device rtc: pxa: convert to use shared sa1100 functions rtc: sa1100: prepare to share sa1100_rtc_ops rtc: ds3232: fix WARNING trace in resume function ...
-
Dan Streetman authored
Remove zpool_init() and zpool_exit(); they do nothing other than print "loaded" and "unloaded". Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Kozlowski authored
The structure zbud_ops is not modified so make the pointer to it a pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Kozlowski authored
The structure zpool_ops is not modified so make the pointer to it a pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dmitry Safonov authored
zswap_get_swap_cache_page and read_swap_cache_async have pretty much the same code with only significant difference in return value and usage of swap_readpage. I a helper __read_swap_cache_async() with the common code. Behavior change: now zswap_get_swap_cache_page will use radix_tree_maybe_preload instead radix_tree_preload. Looks like, this wasn't changed only by the reason of code duplication. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Make zram syslog error reporting more consistent. We have random error levels in some places. For example, critical errors like "Error allocating memory for compressed page" and "Unable to allocate temp memory" are reported as KERN_INFO messages. a) Reassign error levels Error messages that directly affect zram functionality -- pr_err(): Error allocating zram address table Error creating memory pool Decompression failed! err=%d, page=%u Unable to allocate temp memory Compression failed! err=%d Error allocating memory for compressed page: %u, size=%zu Cannot initialise %s compressing backend Error allocating disk queue for device %d Error allocating disk structure for device %d Error creating sysfs group for device %d Unable to register zram-control class Unable to get major number Messages that do not affect functionality, but user must be warned (because sysfs attrs will be removed in this particular case) -- pr_warn(): %d (%s) Attribute %s (and others) will be removed. %s Messages that do not affect functionality and mostly are informative -- pr_info(): Cannot change max compression streams Can't change algorithm for initialized device Cannot change disksize for initialized device Added device: %s Removed device: %s b) Update sysfs_create_group() error message First, it lacks a trailing new line; add it. Second, every error message in zram_add() has a "for device %d" part, which makes errors more informative. Add missing part to "Error creating sysfs group" message. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
We can pass a NULL cache pointer to kmem_cache_destroy(), because it NULL-checks its argument now. Remove redundant test from destroy_handle_cache(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
We can avoid taking class ->lock around zs_can_compact() in zs_shrinker_count(), because the number that we return back is outdated in general case, by design. We have different sources that are able to change class's state right after we return from zs_can_compact() -- ongoing I/O operations, manually triggered compaction, or two of them happening simultaneously. We re-do this calculations during compaction on a per class basis anyway. zs_unregister_shrinker() will not return until we have an active shrinker, so classes won't unexpectedly disappear while zs_shrinker_count() iterates them. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
There is no need to recalcurate pages_per_zspage in runtime. Just use class->pages_per_zspage to avoid unnecessary runtime overhead. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
There is no reason to prevent select ZS_ALMOST_FULL as migration source if we cannot find source from ZS_ALMOST_EMPTY. With this patch, zs_can_compact will return more exact result. Signed-off-by: Minchan Kim <minchan.kim@lge.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
We want to see more ZS_FULL pages and less ZS_ALMOST_{FULL, EMPTY} pages. Put a page with higher ->inuse count first within its ->fullness_list, which will give us better chances to fill up this page with new objects (find_get_zspage() return ->fullness_list head for new object allocation), so some zspages will become ZS_ALMOST_FULL/ZS_FULL quicker. It performs a trivial and cheap ->inuse compare which does not slow down zsmalloc and in the worst case keeps the list pages in no particular order. A more expensive solution could sort fullness_list by ->inuse count. [minchan@kernel.org: code adjustments] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Perform automatic pool compaction by a shrinker when system is getting tight on memory. User-space has a very little knowledge regarding zsmalloc fragmentation and basically has no mechanism to tell whether compaction will result in any memory gain. Another issue is that user space is not always aware of the fact that system is getting tight on memory. Which leads to very uncomfortable scenarios when user space may start issuing compaction 'randomly' or from crontab (for example). Fragmentation is not always necessarily bad, allocated and unused objects, after all, may be filled with the data later, w/o the need of allocating a new zspage. On the other hand, we obviously don't want to waste memory when the system needs it. Compaction now has a relatively quick pool scan so we are able to estimate the number of pages that will be freed easily, which makes it possible to call this function from a shrinker->count_objects() callback. We also abort compaction as soon as we detect that we can't free any pages any more, preventing wasteful objects migrations. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Compaction returns back to zram the number of migrated objects, which is quite uninformative -- we have objects of different sizes so user space cannot obtain any valuable data from that number. Change compaction to operate in terms of pages and return back to compaction issuer the number of pages that were freed during compaction. So from now on we will export more meaningful value in zram<id>/mm_stat -- the number of freed (compacted) pages. This requires: (a) a rename of `num_migrated' to 'pages_compacted' (b) a internal API change -- return first_page's fullness_group from putback_zspage(), so we know when putback_zspage() did free_zspage(). It helps us to account compaction stats correctly. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
`zs_compact_control' accounts the number of migrated objects but it has a limited lifespan -- we lose it as soon as zs_compaction() returns back to zram. It worked fine, because (a) zram had it's own counter of migrated objects and (b) only zram could trigger compaction. However, this does not work for automatic pool compaction (not issued by zram). To account objects migrated during auto-compaction (issued by the shrinker) we need to store this number in zs_pool. Define a new `struct zs_pool_stats' structure to keep zs_pool's stats there. It provides only `num_migrated', as of this writing, but it surely can be extended. A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to caller. Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Change zs_object_copy() argument order to be (DST, SRC) rather than (SRC, DST). copy/move functions usually have (to, from) arguments order. Rename alloc_target_page() to isolate_target_page(). This function doesn't allocate anything, it isolates target page, pretty much like isolate_source_page(). Tweak __zs_compact() comment. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
This function checks if class compaction will free any pages. Rephrasing -- do we have enough unused objects to form at least one ZS_EMPTY page and free it. It aborts compaction if class compaction will not result in any (further) savings. EXAMPLE (this debug output is not part of this patch set): - class size - number of allocated objects - number of used objects - max objects per zspage - pages per zspage - estimated number of pages that will be freed [..] class-512 objs:544 inuse:540 maxobj-per-zspage:8 pages-per-zspage:1 zspages-to-free:0 ... class-512 compaction is useless. break class-496 objs:660 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:2 class-496 objs:627 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:1 class-496 objs:594 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:0 ... class-496 compaction is useless. break class-448 objs:657 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:4 class-448 objs:648 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:3 class-448 objs:639 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:2 class-448 objs:630 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:1 class-448 objs:621 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:0 ... class-448 compaction is useless. break class-432 objs:728 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:1 class-432 objs:700 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:0 ... class-432 compaction is useless. break class-416 objs:819 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:2 class-416 objs:780 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:1 class-416 objs:741 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:0 ... class-416 compaction is useless. break class-400 objs:690 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:1 class-400 objs:680 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:0 ... class-400 compaction is useless. break class-384 objs:736 inuse:709 maxobj-per-zspage:32 pages-per-zspage:3 zspages-to-free:0 ... class-384 compaction is useless. break [..] Every "compaction is useless" indicates that we saved CPU cycles. class-512 has 544 object allocated 540 objects used 8 objects per-page Even if we have a ALMOST_EMPTY zspage, we still don't have enough room to migrate all of its objects and free this zspage; so compaction will not make a lot of sense, it's better to just leave it as is. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Always account per-class `zs_size_stat' stats. This data will help us make better decisions during compaction. We are especially interested in OBJ_ALLOCATED and OBJ_USED, which can tell us if class compaction will result in any memory gain. For instance, we know the number of allocated objects in the class, the number of objects being used (so we also know how many objects are not used) and the number of objects per-page. So we can ensure if we have enough unused objects to form at least one ZS_EMPTY zspage during compaction. We calculate this value on per-class basis so we can calculate a total number of zspages that can be released. Which is exactly what a shrinker wants to know. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
This patchset tweaks compaction and makes it possible to trigger pool compaction automatically when system is getting low on memory. zsmalloc in some cases can suffer from a notable fragmentation and compaction can release some considerable amount of memory. The problem here is that currently we fully rely on user space to perform compaction when needed. However, performing zsmalloc compaction is not always an obvious thing to do. For example, suppose we have a `idle' fragmented (compaction was never performed) zram device and system is getting low on memory due to some 3rd party user processes (gcc LTO, or firefox, etc.). It's quite unlikely that user space will issue zpool compaction in this case. Besides, user space cannot tell for sure how badly pool is fragmented; however, this info is known to zsmalloc and, hence, to a shrinker. This patch (of 7): __zs_compact() does not use `nr_to_migrate', drop it. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Kuleshov authored
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Zhen Lei authored
For a memoryless node, the output of get_pfn_range_for_nid are all zero. It will display mem from 0 to -1. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Xishi Qiu authored
When hot adding a node from add_memory(), we will add memblock first, so the node is not empty. But when called from cpu_up(), the node should be empty. Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>\ Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yaowei Bai authored
We use sysctl_lowmem_reserve_ratio rather than sysctl_lower_zone_reserve_ratio to determine how aggressive the kernel is in defending lowmem from the possibility of being captured into pinned user memory. To avoid misleading, correct it in some comments. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yaowei Bai authored
The comment says that the per-cpu batchsize and zone watermarks are determined by present_pages which is definitely wrong, they are both calculated from managed_pages. Fix it. Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-