Changing base clock frequency directly impacts TSC Hz but not CPUID.16h
value. An overclocked CPU supporting CPUID.16h and with partial CPUID.15h
support will set TSC KHZ according to "best guess" given by CPUID.16h
relying on tsc_refine_calibration_work to give better numbers later.
tsc_refine_calibration_work will refuse to do its work when the outcome is
off the early TSC KHZ value by more than 1% which is certain to happen on
an overclocked system.

Fix this by adding a tsc_early_khz command line parameter that makes the
kernel skip early TSC calibration and use the given value instead.

This allows the user to provide the expected TSC frequency that is closer
to reality than the one reported by the hardware, enabling
tsc_refine_calibration_work to do meaningful error checking.

[ tglx: Made the variable __initdata as it's only used on init and
        removed the error checking in the argument parser because
	kstrto*() only stores to the variable if the string is valid ]
Signed-off-by: Krzysztof Piecuch <piecuch@protonmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/O2CpIOrqLZHgNRkfjRpz_LGqnc1ix_seNIiOCvHY4RHoulOVRo6kMXKuLOfBVTi0SMMevg6Go1uZ_cL9fLYtYdTRNH78ChaFaZyG3VAyYz8=@protonmail.com

TPAUSE instructs the processor to enter an implementation-dependent
optimized state. The instruction execution wakes up when the time-stamp
counter reaches or exceeds the implicit EDX:EAX 64-bit input value.
The instruction execution also wakes up due to the expiration of
the operating system time-limit or by an external interrupt
or exceptions such as a debug exception or a machine check exception.

TPAUSE offers a choice of two lower power states:
 1. Light-weight power/performance optimized state C0.1
 2. Improved power/performance optimized state C0.2

This way, it can save power with low wake-up latency in comparison to
spinloop based delay. The selection between the two is governed by the
input register.

TPAUSE is available on processors with X86_FEATURE_WAITPKG.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1587757076-30337-4-git-send-email-kyung.min.park@intel.com

Refactor code to make it easier to add a new model specific function to
delay for a number of cycles.

No functional change.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1587757076-30337-3-git-send-email-kyung.min.park@intel.com

The naming conventions in the delay code are confusing at best.

All delay variants use a loops argument and or variable which originates
from the original delay_loop() implementation. But all variants except
delay_loop() are based on TSC cycles.

Rename the argument to cycles and make it type u64 to avoid these weird
expansions to u64 in the functions.

Rename MWAITX_MAX_LOOPS to MWAITX_MAX_WAIT_CYCLES for the same reason
and fixup the comment of delay_mwaitx() as well.

Mark the delay_fn function pointer __ro_after_init and fixup the comment
for it.

No functional change and preparation for the upcoming TPAUSE based delay
variant.

[ Kyung Min Park: Added __init to use_tsc_delay() ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1587757076-30337-2-git-send-email-kyung.min.park@intel.com

Pull crypto fixes from Herbert Xu:
 "This fixes a potential scheduling latency problem for the algorithms
  used by WireGuard"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arch/nhpoly1305 - process in explicit 4k chunks
  crypto: arch/lib - limit simd usage to 4k chunks

Pull x86 platform driver fixes from Andy Shevchenko:

 - Avoid loading asus-nb-wmi module on selected laptop models

 - Fix S0ix debug support for Jasper Lake PMC

 - Few fixes which have been reported by Hulk bot and others

* tag 'platform-drivers-x86-v5.7-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: thinkpad_acpi: Remove always false 'value < 0' statement
  platform/x86: intel_pmc_core: avoid unused-function warnings
  platform/x86: asus-nb-wmi: Do not load on Asus T100TA and T200TA
  platform/x86: intel_pmc_core: Change Jasper Lake S0ix debug reg map back to ICL
  platform/x86/intel-uncore-freq: make uncore_root_kobj static
  platform/x86: wmi: Make two functions static
  platform/x86: surface3_power: Fix a NULL vs IS_ERR() check in probe

Since 'value' is declared as unsigned long, the following statement is
always false.
	value < 0

So let's remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When both CONFIG_DEBUG_FS and CONFIG_PM_SLEEP are disabled, the
functions that got moved out of the #ifdef section now cause
a warning:

drivers/platform/x86/intel_pmc_core.c:654:13: error: 'pmc_core_lpm_display' defined but not used [-Werror=unused-function]
  654 | static void pmc_core_lpm_display(struct pmc_dev *pmcdev, struct device *dev,
      |             ^~~~~~~~~~~~~~~~~~~~
drivers/platform/x86/intel_pmc_core.c:617:13: error: 'pmc_core_slps0_display' defined but not used [-Werror=unused-function]
  617 | static void pmc_core_slps0_display(struct pmc_dev *pmcdev, struct device *dev,
      |             ^~~~~~~~~~~~~~~~~~~~~~

Rather than add even more #ifdefs here, remove them entirely and
let the compiler work it out, it can actually get rid of all the
debugfs calls without problems as long as the struct member is
there.

The two PM functions just need a __maybe_unused annotations to avoid
another warning instead of the #ifdef.

Fixes: aae43c2b ("platform/x86: intel_pmc_core: Relocate pmc_core_*_display() to outside of CONFIG_DEBUG_FS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

asus-nb-wmi does not add any extra functionality on these Asus
Transformer books. They have detachable keyboards, so the hotkeys are
send through a HID device (and handled by the hid-asus driver) and also
the rfkill functionality is not used on these devices.

Besides not adding any extra functionality, initializing the WMI interface
on these devices actually has a negative side-effect. For some reason
the \_SB.ATKD.INIT() function which asus_wmi_platform_init() calls drives
GPO2 (INT33FC:02) pin 8, which is connected to the front facing webcam LED,
high and there is no (WMI or other) interface to drive this low again
causing the LED to be permanently on, even during suspend.

This commit adds a blacklist of DMI system_ids on which not to load the
asus-nb-wmi and adds these Transformer books to this list. This fixes
the webcam LED being permanently on under Linux.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Jasper Lake uses Icelake PCH IPs and the S0ix debug interfaces are same as
Icelake. It uses SLP_S0_DBG register latch/read interface from Icelake
generation. It doesn't use Tiger Lake LPM debug registers. Change the
Jasper Lake S0ix debug interface to use the ICL reg map.

Fixes: 16292bed ("platform/x86: intel_pmc_core: Add Atom based Jasper Lake (JSL) platform support")
Signed-off-by: Archana Patni <archana.patni@intel.com>
Acked-by: David E. Box <david.e.box@intel.com>
Tested-by: Divagar Mohandass <divagar.mohandass@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull HID fixes from Jiri Kosina:

 - Wacom driver functional and regression fixes from Jason Gerecke

 - race condition fix in usbhid, found by syzbot and fixed by Alan Stern

 - a few device-specific quirks and ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock
  HID: mcp2221: add gpiolib dependency
  HID: i2c-hid: reset Synaptics SYNA2393 on resume
  HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT
  HID: usbhid: Fix race between usbhid_close() and usbhid_stop()
  Revert "HID: wacom: generic: read the number of expected touches on a per collection basis"
  HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead
  HID: alps: Add AUI1657 device ID
  HID: logitech: Add support for Logitech G11 extra keys
  HID: multitouch: add eGalaxTouch P80H84 support
  HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devices

Pull gcc-plugins fixes from Kees Cook:
 "GCC 10 fixes for gcc-plugins:

   - Adjust caller of cgraph_create_edge for GCC 10 argument usage

   - Update common headers to build under GCC 10 (Frédéric Pierret)"

* tag 'gcc-plugins-v5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-common.h: Update for GCC 10
  gcc-plugins/stackleak: Avoid assignment for unused macro argument

Pull virtio fixes from Michael Tsirkin:
 "A couple of bug fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: vsock: kick send_pkt worker once device is started
  virtio-blk: handle block_device_operations callbacks after hot unplug

Merge tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flex-array reverts from Gustavo Silva:
 "This reverts flexible array changes in include/uapi/

  These structures can get embedded in other structures in user-space
  and cause all sorts of warnings and problems[1]. So, we better don't
  take any chances and keep the zero-length arrays in place for now"

[1] https://lore.kernel.org/lkml/20200424121553.GE26002@ziepe.ca/

* tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  uapi: revert flexible-array conversions

These structures can get embedded in other structures in user-space
and cause all sorts of warnings and problems. So, we better don't take
any chances and keep the zero-length arrays in place for now.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10.  That shows a lot of new warnings.  Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..

This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code.  We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.

Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.

Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull more btrfs fixes from David Sterba:
 "A few more stability fixes, minor build warning fixes and git url
  fixup:

   - fix partial loss of prealloc extent past i_size after fsync

   - fix potential deadlock due to wrong transaction handle passing via
     journal_info

   - fix gcc 4.8 struct intialization warning

   - update git URL in MAINTAINERS entry"

* tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  MAINTAINERS: btrfs: fix git repo URL
  btrfs: fix gcc-4.8 build warning for struct initializer
  btrfs: transaction: Avoid deadlock due to bad initialization timing of fs_info::journal_info
  btrfs: fix partial loss of prealloc extent past i_size after fsync

Pull IOMMU fixes from Joerg Roedel:

 - Fix a memory leak when dev_iommu gets freed and a sub-pointer does
   not

 - Build dependency fixes for Mediatek, spapr_tce, and Intel IOMMU
   driver

 - Export iommu_group_get_for_dev() only for GPLed modules

 - Fix AMD IOMMU interrupt remapping when x2apic is enabled

 - Fix error path in the QCOM IOMMU driver probe function

* tag 'iommu-fixes-v5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/qcom: Fix local_base status check
  iommu: Properly export iommu_group_get_for_dev()
  iommu/vt-d: Use right Kconfig option name
  iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
  iommu: spapr_tce: Disable compile testing to fix build on book3s_32 config
  iommu/mediatek: Fix MTK_IOMMU dependencies
  iommu: Fix the memory leak in dev_iommu_free()

The git repo listed for btrfs hasn't been updated in over a year.
List the current one instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull power management fixes from Rafael Wysocki:

 - prevent the intel_pstate driver from printing excessive diagnostic
   messages in some cases (Chris Wilson)

 - make the hibernation restore kernel freeze kernel threads as well as
   user space tasks (Dexuan Cui)

 - fix the ACPI device PM disagnostic messages to include the correct
   power state name (Kai-Heng Feng).

* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: ACPI: Output correct message on target power state
  PM: hibernate: Freeze kernel threads in software_resume()
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

* pm-cpufreq:
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

* pm-sleep:
  PM: hibernate: Freeze kernel threads in software_resume()

Pull iomap fix from Darrick Wong:
 "Hoist the check for an unrepresentable FIBMAP return value into
  ioctl_fibmap.

  The internal kernel function can handle 64-bit values (and is needed
  to fix a regression on ext4 + jbd2). It is only the userspace ioctl
  that is so old that it cannot deal"

* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fibmap: Warn and return an error in case of block > INT_MAX

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - fix handling of backchannel binding in BIND_CONN_TO_SESSION

  Bugfixes:
   - Fix a credential use-after-free issue in pnfs_roc()
   - Fix potential posix_acl refcnt leak in nfs3_set_acl
   - defer slow parts of rpc_free_client() to a workqueue
   - Fix an Oopsable race in __nfs_list_for_each_server()
   - Fix trace point use-after-free race
   - Regression: the RDMA client no longer responds to server disconnect
     requests
   - Fix return values of xdr_stream_encode_item_{present, absent}
   - _pnfs_return_layout() must always wait for layoutreturn completion

  Cleanups:
   - Remove unreachable error conditions"

* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix a race in __nfs_list_for_each_server()
  NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
  SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
  NFSv4: Remove unreachable error condition due to rpc_run_task()
  SUNRPC: Remove unreachable error condition
  xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
  xprtrdma: Fix trace point use-after-free race
  xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
  nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
  NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
  NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion

Pull dmaengine fixes from Vinod Koul:
 "Core:
   - Documentation typo fixes
   - fix the channel indexes
   - dmatest: fixes for process hang and iterations

  Drivers:
   - hisilicon: build error fix without PCI_MSI
   - ti-k3: deadlock fix
   - uniphier-xdmac: fix for reg region
   - pch: fix data race
   - tegra: fix clock state"

* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dmatest: Fix process hang when reading 'wait' parameter
  dmaengine: dmatest: Fix iteration non-stop logic
  dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
  dmaengine: fix channel index enumeration
  dmaengine: mmp_tdma: Reset channel error on release
  dmaengine: mmp_tdma: Do not ignore slave config validation errors
  dmaengine: pch_dma.c: Avoid data race between probe and irq handler
  dt-bindings: dma: uniphier-xdmac: switch to single reg region
  include/linux/dmaengine: Typos fixes in API documentation
  dmaengine: xilinx_dma: Add missing check for empty list
  dmaengine: ti: k3-psil: fix deadlock on error path
  dmaengine: hisilicon: Fix build error without PCI_MSI

Ning Bo reported an abnormal 2-second gap when booting Kata container [1].
The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of
connecting from the client side. The vhost vsock client tries to connect
an initializing virtio vsock server.

The abnormal flow looks like:
host-userspace           vhost vsock                       guest vsock
==============           ===========                       ============
connect()     -------->  vhost_transport_send_pkt_work()   initializing
   |                     vq->private_data==NULL
   |                     will not be queued
   V
schedule_timeout(2s)
                         vhost_vsock_start()  <---------   device ready
                         set vq->private_data

wait for 2s and failed
connect() again          vq->private_data!=NULL         recv connecting pkt

Details:
1. Host userspace sends a connect pkt, at that time, guest vsock is under
   initializing, hence the vhost_vsock_start has not been called. So
   vq->private_data==NULL, and the pkt is not been queued to send to guest
2. Then it sleeps for 2s
3. After guest vsock finishes initializing, vq->private_data is set
4. When host userspace wakes up after 2s, send connecting pkt again,
   everything is fine.

As suggested by Stefano Garzarella, this fixes it by additional kicking the
send_pkt worker in vhost_vsock_start once the virtio device is started. This
makes the pending pkt sent again.

After this patch, kata-runtime (with vsock enabled) boot time is reduced
from 3s to 1s on a ThunderX2 arm64 server.

[1] https://github.com/kata-containers/runtime/issues/1917Reported-by: Ning Bo <n.b@live.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

A userspace process holding a file descriptor to a virtio_blk device can
still invoke block_device_operations after hot unplug.  This leads to a
use-after-free accessing vblk->vdev in virtblk_getgeo() when
ioctl(HDIO_GETGEO) is invoked:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
  IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  PGD 800000003a92f067 PUD 3a930067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G           OE  ------------   3.10.0-1062.el7.x86_64 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
  RIP: 0010:[<ffffffffc00e5450>]  [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  RSP: 0018:ffff9be5fa893dc8  EFLAGS: 00010246
  RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
  RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
  R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
  FS:  00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
   [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
   [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
   [<ffffffff8d488771>] block_ioctl+0x41/0x50
   [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
   [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0

A related problem is that virtblk_remove() leaks the vd_index_ida index
when something still holds a reference to vblk->disk during hot unplug.
This causes virtio-blk device names to be lost (vda, vdb, etc).

Fix these issues by protecting vblk->vdev with a mutex and reference
counting vblk so the vd_index_ida index can be removed in all cases.

Fixes: 48e4043d ("virtio: add virtio disk geometry feature")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>

Pull VFIO fixes from Alex Williamson:

 - copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)

 - Fix a potential math overflow (Yan Zhao)

 - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)

* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
  vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
  vfio: checking of validity of user vaddr in vfio_dma_rw

Pull arm64 fix from Catalin Marinas:
 "Add -fasynchronous-unwind-tables to the vDSO CFLAGS"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: vdso: Add -fasynchronous-unwind-tables to cflags

Pull io_uring fixes from Jens Axboe:

 - Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail

 - Cover a few cases where async poll can handle retry, eliminating the
   need for an async thread

 - fallback request busy/free fix (Bijan)

 - syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)

 - Fix extra put of req for sync_file_range (Pavel)

 - Always punt splice async. We'll improve this for 5.8, but wanted to
   eliminate the inode mutex lock from the non-blocking path for 5.7
   (Pavel)

* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  io_uring: punt splice async because of inode mutex
  io_uring: check non-sync defer_list carefully
  io_uring: fix extra put in sync_file_range()
  io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
  io_uring: use proper references for fallback_req locking
  io_uring: only force async punt if poll based retry can't handle it
  io_uring: enable poll retry for any file with ->read_iter / ->write_iter
  io_uring: statx must grab the file table for valid fd

Pull block fixes from Jens Axboe:
 "A few fixes for this release:

   - NVMe pull request from Christoph, with a single fix for a double
     free in the namespace error handling.

   - Kill the bd_openers check in blk_drop_partitions(), fixing a
     regression in this merge window (Christoph)"

* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  block: remove the bd_openers checks in blk_drop_partitions
  nvme: prevent double free in nvme_alloc_ns() error handling

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes, and two reverts because the original patches
  revealed underlying problems which the Tegra guys are now working on"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Avoid i2c interrupt status clear race condition.
  i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
  Revert "i2c: tegra: Synchronize DMA before termination"
  i2c: iproc: generate stop event for slave writes

Pull sound fixes from Takashi Iwai:
 "Just a collection of small fixes around this time:

   - One more try for fixing PCM OSS regression

   - HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
     a lock fix in the minor error path, and a fix for the possible race
     at monitor notifiaction

   - USB-audio: a quirk ID fix, a fix for POD HD500 workaround"

* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
  ALSA: opti9xx: shut up gcc-10 range warning
  ALSA: hda/hdmi: fix without unlocked before return
  ALSA: hda/hdmi: fix race in monitor detection during probe
  ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
  ALSA: line6: Fix POD HD500 audio playback
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
  ALSA: hda: Match both PCI ID and SSID for driver blacklist

Pull drm fixes from Dave Airlie:
 "Regular scheduled fixes for graphics. Nothing to extreme bunch of
  amdgpu fixes, i915 and qxl fixes, along with some misc ones.

  All seems to be progressing normally.

  core:
   - EDID off by one DTD fix
   - DP mst write return code fix

  dma-buf:
   - fix SET_NAME ioctl uapi
   - doc fixes

  amdgpu:
   - Fix a green screen on resume issue
   - PM fixes for SR-IOV SDMA fix for navi
   - Renoir display fixes
   - Cursor and pageflip stuttering fixes
   - Misc additional display fixes
   - (uapi) Add additional DCC tiling flags for navi1x

  i915:
   - Fix selftest refcnt leak (Xiyu)
   - Fix gem vma lock (Chris)
   - Fix gt's i915_request.timeline acquire by checking if cacheline is
     valid (Chris)
   - Fix IRQ postinistall fault masks (Matt)

  qxl:
   - use after gree fix
   - fix lost kunmap
   - release leak fix

  virtio:
   - context destruction fix"

* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  dma-buf: fix documentation build warnings
  drm/qxl: qxl_release use after free
  drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
  drm/i915: Use proper fault mask in interrupt postinstall too
  drm/amd/display: Use cursor locking to prevent flip delays
  drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
  drm/amd/display: Defer cursor update around VUPDATE for all ASIC
  drm/amd/display: fix rn soc bb update
  drm/amd/display: check if REFCLK_CNTL register is present
  drm/amdgpu: bump version for invalidate L2 before SDMA IBs
  drm/amdgpu: invalidate L2 before SDMA IBs (v2)
  drm/amdgpu: add tiling flags from Mesa
  drm/amd/powerplay: avoid using pm_en before it is initialized revised
  Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
  drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
  drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
  drm/virtio: only destroy created contexts
  drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
  drm/i915/gt: Check cacheline is valid before acquiring
  drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
  ...

Pull SCSI fixes from James Bottomley:
 "Four minor fixes: three in drivers and one in the core.

  The core one allows an additional state change that fixes a regression
  introduced by an update to the aacraid driver in the previous merge
  window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target/iblock: fix WRITE SAME zeroing
  scsi: qla2xxx: check UNLOADING before posting async work
  scsi: qla2xxx: set UNLOADING before waiting for session deletion
  scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK

Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

[   40.179474] refcount_t: underflow; use-after-free.
[   40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[   40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[   40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[   40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[   40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[   40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[   40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[   40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[   40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[   40.179634] FS:  0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[   40.179636] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[   40.179641] Call Trace:
[   40.179652]  io_put_req+0x36/0x40
[   40.179657]  io_free_work+0x15/0x20
[   40.179661]  io_worker_handle_work+0x2f5/0x480
[   40.179667]  io_wqe_worker+0x2a9/0x360
[   40.179674]  ? _raw_spin_unlock_irqrestore+0x24/0x40
[   40.179681]  kthread+0x12c/0x170
[   40.179685]  ? io_worker_handle_work+0x480/0x480
[   40.179690]  ? kthread_park+0x90/0x90
[   40.179695]  ret_from_fork+0x35/0x40
[   40.179702] ---[ end trace 85027405f00110aa ]---

Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.

Fixes: 0ae349a0 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.comSigned-off-by: Joerg Roedel <jroedel@suse.de>