- 15 Jul, 2008 40 commits
-
-
Eli Cohen authored
When the driver sets the MTU of the net device outside of its change_mtu method, it should make use of dev_set_mtu() instead of directly setting the mtu field of struct netdevice. Otherwise functions registered to be called upon MTU change will not get called (this is done through call_netdevice_notifiers() in dev_set_mtu()). Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Eli Cohen authored
Use of this lock is required to synchronize changes to the netdvice's data structs. Also move the call to ipoib_flush_paths() after the modification of the netdevice flags in set_mode(). Signed-off-by:
-
Roland Dreier authored
ipoib_mcast_detach() does nothing except call ib_detach_mcast(), so just use the core API in the one place that does a multicast group detach. add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-105 (-105) function old new delta ipoib_mcast_leave 357 319 -38 ipoib_mcast_detach 67 - -67 Signed-off-by: -
Eli Cohen authored
The current code will set the Q_Key for any join of a non-sendonly multicast group. The operation involves a modify QP operation, which is fairly heavyweight, and is only really required after the join of the broadcast group. Fix this by adding a parameter to ipoib_mcast_attach() to control when the Q_Key is set. Signed-off-by:
-
Eli Cohen authored
No need for a mutex around calls to ib_attach_mcast/ib_detach_mcast since these operations are synchronized at the HW driver layer. Signed-off-by:
-
Eli Cohen authored
The IPOIB_MCAST_STARTED flag is not used at all since commit b3e2749b ("IPoIB: Don't drop multicast sends when they can be queued"), so remove it. Signed-off-by:
-
Steve Wise authored
Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Roland Dreier authored
Every caller of nes_post_cqp_request() passed it NES_CQP_REQUEST_RING_DOORBELL, so just remove that parameter and always ring the doorbell. Signed-off-by:
Faisal Latif <flatif@neteffect.com>
-
Jon Mason authored
cxgb3 does not currently report the page size capabilities, and incorrectly reports them internally. This version changes the bit-shifting to a static value (per Steve's request). Signed-off-by:
Jon Mason <jon@opengridcomputing.com> Acked-by:
-
Roland Dreier authored
The iw_nes driver repeats the logic if (atomic_dec_and_test(&cqp_request->refcount)) { if (cqp_request->dynamic) { kfree(cqp_request); } else { spin_lock_irqsave(&nesdev->cqp.lock, flags); list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); spin_unlock_irqrestore(&nesdev->cqp.lock, flags); } } over and over. Wrap this up in functions nes_free_cqp_request() and nes_put_cqp_request() to simplify such code. In addition to making the source smaller and more readable, this shrinks the compiled code quite a bit: add/remove: 2/0 grow/shrink: 0/13 up/down: 164/-1692 (-1528) function old new delta nes_free_cqp_request - 147 +147 nes_put_cqp_request - 17 +17 nes_modify_qp 2316 2293 -23 nes_hw_modify_qp 737 657 -80 nes_dereg_mr 945 860 -85 flush_wqes 501 416 -85 nes_manage_apbvt 648 560 -88 nes_reg_mr 1117 1026 -91 nes_cqp_ce_handler 927 769 -158 nes_alloc_mw 1052 884 -168 nes_create_qp 5314 5141 -173 nes_alloc_fmr 2212 2035 -177 nes_destroy_cq 1097 918 -179 nes_create_cq 2787 2598 -189 nes_dealloc_mw 762 566 -196 Signed-off-by: -
Moni Shoua authored
The patch tries to solve the problem of device going down and paths being flushed on an SM change event. The method is to mark the paths as candidates for refresh (by setting the new valid flag to 0), and wait for an ARP probe a new path record query. The solution requires a different and less intrusive handling of SM change event. For that, the second argument of the flush function changes its meaning from a boolean flag to a level. In most cases, SM failover doesn't cause LID change so traffic won't stop. In the rare cases of LID change, the remote host (the one that hadn't changed its LID) will lose connectivity until paths are refreshed. This is no worse than the current state. In fact, preventing the device from going down saves packets that otherwise would be lost. Signed-off-by:
Moni Levy <monil@voltaire.com> Signed-off-by:
Moni Shoua <monis@voltaire.com> Signed-off-by:
-
Joachim Fenkes authored
This gives ehca an autogenerated modalias and therefore enables automatic loading. Signed-off-by:
Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by:
-
Vladimir Sokolovsky authored
Add "ipoib_use_lro" module parameter to enable LRO and an "ipoib_lro_max_aggr" module parameter to set the max number of packets to be aggregated. Make LRO controllable and LRO statistics accessible through ethtool. Signed-off-by:
Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by:
-
Ron Livne authored
Set IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK for IPoIB's UD QPs if supported by the underlying device. This creates an improvement of up to 39% in bandwidth when sending multicast packets with IPoIB, and an improvment of 12% in cpu usage. Signed-off-by:
Ron Livne <ronli@voltaire.com> Signed-off-by:
-
Ron Livne authored
Add support for handling the IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK flag by using the per-multicast group loopback blocking feature of mlx4 hardware. Signed-off-by:
-
Ron Livne authored
This patch also adds a creation flag for QPs, IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK, which when set means that multicast sends from the QP to a group that the QP is attached to will not be looped back to the QP's receive queue. This can be used to save receive resources when a consumer does not want a local copy of multicast traffic; for example IPoIB must waste CPU time throwing away such local copies of multicast traffic. This patch also adds a device capability flag that shows whether a device supports this feature or not. Signed-off-by:
-
Steve Wise authored
- Add a new rdma ctl command called RDMA_GET_MIB to the cxgb3 low level driver to obtain the protocol mib from the rnic hardware. - Add new iw_cxgb3 provider method to get the MIB from the low level driver. Signed-off-by:
-
Steve Wise authored
This patch adds a sysfs attribute group called "proto_stats" under /sys/class/infiniband/$device/ and populates this group with protocol statistics if they exist for a given device. Currently, only iWARP stats are defined, but the code is designed to allow InfiniBand protocol stats if they become available. These stats are per-device and more importantly -not- per port. Details: - Add union rdma_protocol_stats in ib_verbs.h. This union allows defining transport-specific stats. Currently only iwarp stats are defined. - Add struct iw_protocol_stats to define the current set of iwarp protocol stats. - Add new ib_device method called get_proto_stats() to return protocol statistics. - Add logic in core/sysfs.c to create iwarp protocol stats attributes if the device is an RNIC and has a get_proto_stats() method. Signed-off-by:
-
Roland Dreier authored
For devices that don't support SRQs, ipoib_cm_post_receive_nonsrq() is called from both ipoib_cm_handle_rx_wc() and ipoib_cm_nonsrq_init_rx(), and these two callers are not synchronized against each other. However, ipoib_cm_post_receive_nonsrq() always reuses the same receive work request and scatter list structures, so multiple callers can end up stepping on each other, which leads to posting garbled work requests. Fix this by having the caller pass in the ib_recv_wr and ib_sge structures to use, and allocating new local structures in ipoib_cm_nonsrq_init_rx(). Based on a patch by Pradeep Satyanarayana <pradeep@us.ibm.com> and David Wilder <dwilder@us.ibm.com>, with debugging help from Hoang-Nam Nguyen <hnguyen@de.ibm.com>. Signed-off-by: -
Roland Dreier authored
Signed-off-by:
Sean Hefty <sean.hefty@intel.com>
-
Roland Dreier authored
The members struct iwch_rnic_attributes.vendor_id and .vendor_part_id are write-only, so we might as well get rid of them. Signed-off-by:
-
Steve Wise authored
- set fw_ver - set hw_ver - set max_qp_wr to something reasonable - set max_cqe to something reasonable Signed-off-by:
-
Stefan Roscher authored
During corner case testing, we noticed that some versions of ehca do not properly transition to interrupt done in special load situations. This can be resolved by periodically triggering EOI through H_EOI, if EQEs are pending. Signed-off-by:
Stefan Roscher <stefan.roscher@de.ibm.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Joachim Fenkes authored
Signed-off-by:
-
Roland Dreier authored
Commit 65adfa91 ("IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions") added some extra code to handle a QP state transition from RESET to ERROR. However, the latest 1.2.1 version of the IB spec has clarified that this transition is actually not allowed, so we can remove this extra code again. Signed-off-by:
-
Roland Dreier authored
Commit b18aad71 ("IB/mthca: Fix RESET to ERROR transition") added some extra code to handle a QP state transition from RESET to ERROR. However, the latest 1.2.1 version of the IB spec has clarified that this transition is actually not allowed, so we can remove this extra code again. Signed-off-by:
-
Ralph Campbell authored
I was reviewing the QP state transition diagram in the IB 1.2.1 spec and the code for qp_state_table[], and noticed that the code allows a QP to be modified from IB_QPS_RESET to IB_QPS_ERR whereas the notes for figure 124 (pg 457) specifically says that this transition isn't allowed. This is a clarification from earlier versions of the IB spec, which were ambiguous in this area and suggested that the RESET to ERR transition was allowed. Fix up the qp_state_table[] to make RESET->ERR not allowed. Signed-off-by:
Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by:
-
Eli Cohen authored
ConnectX HCAs support the IB_MGMT_CLASS_CONG_MGMT management class, so process MADs of this class through the MAD_IFC firmware command. Signed-off-by:
-
Eli Cohen authored
ConnectX returns the max message size it supports through the QUERY_DEV_CAP firmware command. When modifying a QP to RTR, the max message size for the QP must be specified. This value must not exceed the value declared through QUERY_DEV_CAP. The current code ignores the max allowed size and unconditionally sets the value to 2^31. This patch sets all QPs to the max value allowed as returned from firmware. Signed-off-by:
-
Steve Wise authored
- set IB_DEVICE_MEM_MGT_EXTENSIONS capability bit if fw supports it. - set max_fast_reg_page_list_len device attribute. - add iwch_alloc_fast_reg_mr function. - add iwch_alloc_fastreg_pbl - add iwch_free_fastreg_pbl - adjust the WQ depth for kernel mode work queues to account for fastreg possibly taking 2 WR slots. - add fastreg_mr work request support. - add local_inv work request support. - add send_with_inv and send_with_se_inv work request support. - removed useless duplicate enums/defines for TPT/MW/MR stuff. Signed-off-by:
-
Steve Wise authored
This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by:
-
Eli Cohen authored
The connected mode implementation in the IPoIB driver has a large overhead in the way SKBs are handled in the receive flow. It usually allocates an SKB with as big as was used in the currently received SKB and moves unused fragments from the old SKB to the new one. This involves a loop on all the remaining fragments and incurs overhead on the CPU. This patch, for small SKBs, allocates an SKB just large enough to contain the received data and copies to it the data from the received SKB. The newly allocated SKB is passed to the stack and the old SKB is reposted. When running netperf, UDP small messages, without this pach I get: UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 14.4.3.178 (14.4.3.178) port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 114688 128 10.00 5142034 0 526.31 114688 10.00 1130489 115.71 With this patch I get both send and receive at ~315 mbps. The reason that send performance actually slows down is as follows: When using this patch, the overhead of the CPU for handling RX packets is dramatically reduced. As a result, we do not experience RNR NAK messages from the receiver which cause the connection to be closed and reopened again; when the patch is not used, the receiver cannot handle the packets fast enough so there is less time to post new buffers and hence the mentioned RNR NACKs. So what happens is that the application *thinks* it posted a certain number of packets for transmission but these packets are flushed and do not really get transmitted. Since the connection gets opened and closed many times, each time netperf gets the CPU time that otherwise would have been given to IPoIB to actually transmit the packets. This can be verified when looking at the port counters -- the output of ifconfig and the oputput of netperf (this is for the case without the patch): tx packets ========== port counter: 1,543,996 ifconfig: 1,581,426 netperf: 5,142,034 rx packets ========== netperf 1,1304,089 Signed-off-by: -
Roland Dreier authored
They don't get updated by git and so they're worse than useless. Signed-off-by: -
Dotan Barak authored
Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by:
Dotan Barak <dotanba@gmail.com> Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Eli Cohen authored
The idea is that for QPs with fixed size work requests (eg selective signaling QPs), before stamping the WQE, we read the value of the DS field, which gives the effective size of the descriptor as used in the previous post. Then we stamp only that area, since the rest of the descriptor is already stamped. When initializing the send queue buffer, make sure the DS field is initialized to the max descriptor size so that the subsequent stamping will be done on the entire descriptor area. Signed-off-by:
-
Moni Shoua authored
This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by:
-
Sean Hefty authored
The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by:
-
Christophe Jaillet authored
Remove an explicit memset(..., 0, ...) of a 'listener' structure allocated with kzalloc(). Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Acked-by:
Faisal Latif <faisal@neteffect.com> Signed-off-by:
-
Roland Dreier authored
The SRP initiator is currently using ib_find_cached_pkey() and ib_get_cached_gid() in situations where the uncached ib_find_pkey() and ib_query_gid() functions serve just as well: sleeping is allowed and performance is not an issue. Since we want to eliminate the cached operations in the long term, convert SRP to use the uncached variants. Signed-off-by:
-
