- 28 Apr, 2016 16 commits
-
-
Ismail, Mustafa authored
Fix to correct max reported message size in query port. Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
Faisal Latif <faisal.latif@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Ismail, Mustafa authored
Make sure cm_node is setup before sending SYN packet and ORD/IRD negotiation. Signed-off-by:
-
Ismail, Mustafa authored
Include inline data size as part of SQ size calculation. RQ size calculation uses only number of SGEs and does not support 96 byte WQE size. Signed-off-by:
-
Ismail, Mustafa authored
Change region_length to u64 as a region can be > 4GB. Signed-off-by:
-
Doug Ledford authored
-
Doug Ledford authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into testing/4.6
-
Jason Gunthorpe authored
The drivers/infiniband stack uses write() as a replacement for bi-directional ioctl(). This is not safe. There are ways to trigger write calls that result in the return structure that is normally written to user space being shunted off to user specified kernel memory instead. For the immediate repair, detect and deny suspicious accesses to the write API. For long term, update the user space libraries and the kernel API to something that doesn't present the same security vulnerabilities (likely a structured ioctl() interface). The impacted uAPI interfaces are generally only available if hardware from drivers/infiniband is installed in the system. Reported-by:
Jann Horn <jann@thejh.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [ Expanded check to all known write() entry points ] Cc: stable@vger.kernel.org Signed-off-by:
-
Dean Luick authored
The ui device llseek had a mistake with SEEK_END and did not fully follow seek semantics. Correct all this by using a kernel supplied function for fixed size devices. Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
-
Mitko Haralanov authored
Attempting to free resources which have not been allocated and initialized properly led to the following kernel backtrace: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] PGD 852a43067 PUD 85d4a6067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 2831 Comm: osu_bw Tainted: G IO 3.12.18-wfr+ #1 task: ffff88085b15b540 ti: ffff8808588fe000 task.ti: ffff8808588fe000 RIP: 0010:[<ffffffffa09658fe>] [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] RSP: 0018:ffff8808588ffde0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff880858a31800 RCX: 0000000000000000 RDX: ffff88085d971bc0 RSI: ffff880858a318f8 RDI: ffff880858a318c0 RBP: ffff8808588ffe20 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88087ffd6f40 R11: 0000000001100348 R12: ffff880852900000 R13: ffff880858a318c0 R14: 0000000000000000 R15: ffff88085d971be8 FS: 00007f4674e83740(0000) GS:ffff88087f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000085c377000 CR4: 00000000001407f0 Stack: ffffffffa0941a71 ffff880858a318f8 ffff88085d971bc0 ffff880858a31800 ffff880852900000 ffff880858a31800 00000000003ffff7 ffff88085d971bc0 ffff8808588ffe60 ffffffffa09663fc ffff8808588ffe60 ffff880858a31800 Call Trace: [<ffffffffa0941a71>] ? find_mmu_handler+0x51/0x70 [hfi1] [<ffffffffa09663fc>] hfi1_user_exp_rcv_free+0x6c/0x120 [hfi1] [<ffffffffa0932809>] hfi1_file_close+0x1a9/0x340 [hfi1] [<ffffffff8116c189>] __fput+0xe9/0x270 [<ffffffff8116c35e>] ____fput+0xe/0x10 [<ffffffff81065707>] task_work_run+0xa7/0xe0 [<ffffffff81002969>] do_notify_resume+0x59/0x80 [<ffffffff814ffc1a>] int_signal+0x12/0x17 This commit re-arranges the context initialization code in a way that would allow for context event flags to be used to determine whether the context has been successfully initialized. In turn, this can be used to skip the resource de-allocation if they were never allocated in the first place. Fixes: 3abb33ac ("staging/hfi1: Add TID cache receive init and free funcs") Reviewed-by:Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com. Signed-off-by:
-
Mike Marciniszyn authored
The iowait_sdma_drained() callback lacked locking to protect the qp s_flags field. This causes the s_flags to be out of sync on multiple CPUs, potentially corrupting the s_flags. Fixes: a545f530 ("staging/rdma/hfi: fix CQ completion order issue") Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Jubin John authored
call_send is used to determine whether to send immediately or schedule a send for later. The current logic in rdmavt is inverted and has a negative impact on the latency of the hfi1 and qib drivers. Fix this regression by correctly calling send immediately when call_send is set. Reviewed-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
-
Mitko Haralanov authored
The routine used by the SDMA cache to handle already cached nodes can extend an already existing node. In its error handling code, the routine will unpin pages when not all pages of the buffer extension were pinned. There was a bug in that part of the routine, which would mistakenly unpin pages from the original set rather than the newly pinned pages. This commit fixes that bug by offsetting the page array to the proper place pointing at the beginning of the newly pinned pages. Reviewed-by:
-
Mitko Haralanov authored
The locking around the interval RB tree is designed to prevent access to the tree while it's being modified. The locking in its current form is too overzealous, which is causing a deadlock in certain cases with the following backtrace: Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 CPU: 0 PID: 5836 Comm: IMB-MPI1 Tainted: G O 3.12.18-wfr+ #1 0000000000000000 ffff88087f206c50 ffffffff814f1caa ffffffff817b53f0 ffff88087f206cc8 ffffffff814ecd56 0000000000000010 ffff88087f206cd8 ffff88087f206c78 0000000000000000 0000000000000000 0000000000001662 Call Trace: <NMI> [<ffffffff814f1caa>] dump_stack+0x45/0x56 [<ffffffff814ecd56>] panic+0xc2/0x1cb [<ffffffff810d4370>] ? restart_watchdog_hrtimer+0x50/0x50 [<ffffffff810d4432>] watchdog_overflow_callback+0xc2/0xd0 [<ffffffff81109b4e>] __perf_event_overflow+0x8e/0x2b0 [<ffffffff8110a714>] perf_event_overflow+0x14/0x20 [<ffffffff8101c906>] intel_pmu_handle_irq+0x1b6/0x390 [<ffffffff814f927b>] perf_event_nmi_handler+0x2b/0x50 [<ffffffff814f8ad8>] nmi_handle.isra.3+0x88/0x180 [<ffffffff814f8d39>] do_nmi+0x169/0x310 [<ffffffff814f8177>] end_repeat_nmi+0x1e/0x2e [<ffffffff81272600>] ? unmap_single+0x30/0x30 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 <<EOE>> <IRQ> [<ffffffffa056c4a8>] hfi1_mmu_rb_search+0x38/0x70 [hfi1] [<ffffffffa05919cb>] user_sdma_free_request+0xcb/0x120 [hfi1] [<ffffffffa0593393>] user_sdma_txreq_cb+0x263/0x350 [hfi1] [<ffffffffa057fad7>] ? sdma_txclean+0x27/0x1c0 [hfi1] [<ffffffffa0593130>] ? user_sdma_send_pkts+0x1710/0x1710 [hfi1] [<ffffffffa057fdd6>] sdma_make_progress+0x166/0x480 [hfi1] [<ffffffff810762c9>] ? ttwu_do_wakeup+0x19/0xd0 [<ffffffffa0581c7e>] sdma_engine_interrupt+0x8e/0x100 [hfi1] [<ffffffffa0546bdd>] sdma_interrupt+0x5d/0xa0 [hfi1] [<ffffffff81097e57>] handle_irq_event_percpu+0x47/0x1d0 [<ffffffff81098017>] handle_irq_event+0x37/0x60 [<ffffffff8109aa5f>] handle_edge_irq+0x6f/0x120 [<ffffffff810044af>] handle_irq+0xbf/0x150 [<ffffffff8104c9b7>] ? irq_enter+0x17/0x80 [<ffffffff8150168d>] do_IRQ+0x4d/0xc0 [<ffffffff814f7c6a>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff814f56c6>] __schedule+0x3b6/0x7e0 [<ffffffff810763a6>] __cond_resched+0x26/0x30 [<ffffffff814f5eda>] _cond_resched+0x3a/0x50 [<ffffffff814f4f82>] down_write+0x12/0x30 [<ffffffffa0591619>] hfi1_release_user_pages+0x69/0x90 [hfi1] [<ffffffffa059173a>] sdma_rb_remove+0x9a/0xc0 [hfi1] [<ffffffffa056c00d>] __mmu_rb_remove.isra.5+0x5d/0x70 [hfi1] [<ffffffffa056c536>] hfi1_mmu_rb_remove+0x56/0x70 [hfi1] [<ffffffffa059427b>] hfi1_user_sdma_process_request+0x74b/0x1160 [hfi1] [<ffffffffa055c763>] hfi1_aio_write+0xc3/0x100 [hfi1] [<ffffffff8116a14c>] do_sync_readv_writev+0x4c/0x80 [<ffffffff8116b58b>] do_readv_writev+0xbb/0x230 [<ffffffff811a9da1>] ? fsnotify+0x241/0x320 [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff8116b795>] vfs_writev+0x35/0x60 [<ffffffff8116b8c9>] SyS_writev+0x49/0xc0 [<ffffffff810cd876>] ? __audit_syscall_exit+0x1f6/0x2a0 [<ffffffff814ff992>] system_call_fastpath+0x16/0x1b As evident from the backtrace above, the process was being put to sleep while holding the lock. Limiting the scope of the lock only to the RB tree operation fixes the above error allowing for proper locking and the process being put to sleep when needed. Reviewed-by: -
Mitko Haralanov authored
There is a potential kernel crash when the MMU notifier calls the invalidation routines in the hfi1 pinned page caching code for sdma. The invalidation routine could call the remove callback for the node, which in turn ends up dereferencing the current task_struct to get a pointer to the mm_struct. However, the mm_struct pointer could be NULL resulting in the following backtrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] 15 task: ffff88085e66e080 ti: ffff88085c244000 task.ti: ffff88085c244000 RIP: 0010:[<ffffffffa041f75a>] [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] RSP: 0000:ffff88085c245878 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88105b9bbd40 RCX: ffffea003931a830 RDX: 0000000000000004 RSI: ffff88105754a9c0 RDI: ffff88105754a9c0 RBP: ffff88085c245890 R08: ffff88105b9bbd70 R09: 00000000fffffffb R10: ffff88105b9bbd58 R11: 0000000000000013 R12: ffff88105754a9c0 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88105b9bbd40 FS: 0000000000000000(0000) GS:ffff88107ef40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000001a0b000 CR4: 00000000001407e0 Stack: ffff88105b9bbd40 ffff88080ec481a8 ffff88080ec481b8 ffff88085c2458c0 ffffffffa03fa00e ffff88080ec48190 ffff88080ed9cd00 0000000001024000 0000000000000000 ffff88085c245920 ffffffffa03fa0e7 0000000000000282 Call Trace: [<ffffffffa03fa00e>] __mmu_rb_remove.isra.5+0x5e/0x70 [hfi1] [<ffffffffa03fa0e7>] mmu_notifier_mem_invalidate+0xc7/0xf0 [hfi1] [<ffffffffa03fa143>] mmu_notifier_page+0x13/0x20 [hfi1] [<ffffffff81156dd0>] __mmu_notifier_invalidate_page+0x50/0x70 [<ffffffff81140bbb>] try_to_unmap_one+0x20b/0x470 [<ffffffff81141ee7>] try_to_unmap_anon+0xa7/0x120 [<ffffffff81141fad>] try_to_unmap+0x4d/0x60 [<ffffffff8111fd7b>] shrink_page_list+0x2eb/0x9d0 [<ffffffff81120ab3>] shrink_inactive_list+0x243/0x490 [<ffffffff81121491>] shrink_lruvec+0x4c1/0x640 [<ffffffff81121641>] shrink_zone+0x31/0x100 [<ffffffff81121b0f>] kswapd_shrink_zone.constprop.62+0xef/0x1c0 [<ffffffff811229e3>] kswapd+0x403/0x7e0 [<ffffffff811225e0>] ? shrink_all_memory+0xf0/0xf0 [<ffffffff81068ac0>] kthread+0xc0/0xd0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 [<ffffffff814ff8ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 To correct this, the mm_struct passed to us by the MMU notifier is used (which is what should have been done to begin with). This avoids the broken derefences and ensures that the correct mm_struct is used. Reviewed-by: -
Sagi Grimberg authored
Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Acked-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sagi Grimberg authored
mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Sagi Grimberg <sagig@grimberg.me> Signed-off-by:
-
- 27 Apr, 2016 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "So, it turns out we had a silly bug in the most fundamental part of workqueue for a very long time. AFAICS, this dates back to pre-git era and has quite likely been there from the time workqueue was first introduced. A work item uses its PENDING bit to synchronize multiple queuers. Anyone who wins the PENDING bit owns the pending state of the work item. Whether a queuer wins or loses the race, one thing should be guaranteed - there will soon be at least one execution of the work item - where "after" means that the execution instance would be able to see all the changes that the queuer has made prior to the queueing attempt. Unfortunately, we were missing a smp_mb() after clearing PENDING for execution, so nothing guaranteed visibility of the changes that a queueing loser has made, which manifested as a reproducible blk-mq stall. Lots of kudos to Roman for debugging the problem. The patch for -stable is the minimal one. For v3.7, Peter is working on a patch to make the code path slightly more efficient and less fragile" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix ghost PENDING flag while doing MQ IO
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Two patches to fix a deadlock which can be easily triggered if memcg charge moving is used. This bug was introduced while converting threadgroup locking to a global percpu_rwsem and is caused by cgroup controller task migration path depending on the ability to create new kthreads. cpuset had a similar issue which was fixed by performing heavy-lifting operations asynchronous to task migration. The two patches fix the same issue in memcg in a similar way. The first patch makes the mechanism generic and the second relocates memcg charge moving outside the migration path. Given that we don't want to perform heavy operations while writelocking threadgroup lock anyway, moving them out of the way is a desirable solution. One thing to note is that the problem was difficult to debug because lockdep couldn't figure out the deadlock condition. Looking into how to improve that" * 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: memcg: relocate charge moving from ->attach to ->post_attach cgroup, cpuset: replace cpuset_post_attach_flush() with cgroup_subsys->post_attach callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "I2C has one buildfix, one ABBA deadlock fix, and three simple 'add ID' patches" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: exynos5: Fix possible ABBA deadlock by keeping I2C clock prepared i2c: cpm: Fix build break due to incompatible pointer types i2c: ismt: Add Intel DNV PCI ID i2c: xlp9xx: add support for Broadcom Vulcan i2c: rk3x: add support for rk3228
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - lockdep now works for ARCv2 builds - enable DT reserved-memory binding (for forthcoming HDMI driver) * tag 'arc-4.6-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: add support for reserved memory defined by device tree ARC: support generic per-device coherent dma mem Documentation: dt: arc: fix spelling mistakes ARCv2: Enable LOCKDEP
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull arch/nios2 fix from Ley Foon Tan: "memset: use the right constraint modifier for the %4 output operand" * tag 'nios2-v4.6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: memset: use the right constraint modifier for the %4 output operand
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v4.6-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fix from Darren Hart: "Fix regression caused by hotkey enabling value in toshiba_acpi" * tag 'platform-drivers-x86-v4.6-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: toshiba_acpi: Fix regression caused by hotkey enabling value
-
Alexey Brodkin authored
Enable reserved memory initialization from device tree. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com>
-
Alexey Brodkin authored
Signed-off-by:
-
Romain Perier authored
Depending on the size of the area to be memset'ed, the nios2 memset implementation either uses a naive loop (for buffers smaller or equal than 8 bytes) or a more optimized implementation (for buffers larger than 8 bytes). This implementation does 4-byte stores rather than 1-byte stores to speed up memset. However, we discovered that on our nios2 platform, memset() was not properly setting the buffer to the expected value. A memset of 0xff would not set the entire buffer to 0xff, but to: 0xff 0x00 0xff 0x00 0xff 0x00 0xff 0x00 ... Which is obviously incorrect. Our investigation has revealed that the problem lies in the incorrect constraints used in the inline assembly. The following piece of assembly, from the nios2 memset implementation, is supposed to create a 4-byte value that repeats 4 times the 1-byte pattern passed as memset argument: /* fill8 %3, %5 (c & 0xff) */ " slli %4, %5, 8\n" " or %4, %4, %5\n" " slli %3, %4, 16\n" " or %3, %3, %4\n" However, depending on the compiler and optimization level, this code might be compiled as: 34: 280a923a slli r5,r5,8 38: 294ab03a or r5,r5,r5 3c: 2808943a slli r4,r5,16 40: 2148b03a or r4,r4,r5 This is wrong because r5 gets used both for %5 and %4, which leads to the final pattern stored in r4 to be 0xff00ff00 rather than the expected 0xffffffff. %4 is defined with the "=r" constraint, i.e as an output operand. However, as explained in http://www.ethernut.de/en/documents/arm-inline-asm.html, this does not prevent gcc from using the same register for an output operand (%4) and input operand (%5). By using the constraint modifier '&', we indicate that the register should be used for output only. With this change, we get the following assembly output: 34: 2810923a slli r8,r5,8 38: 4150b03a or r8,r8,r5 3c: 400e943a slli r7,r8,16 40: 3a0eb03a or r7,r7,r8 Which correctly produces the 0xffffffff pattern when 0xff is passed as the memset() pattern. It is worth mentioning the observed consequence of this bug: we were hitting the kernel BUG() in mm/bootmem.c:__free() that verifies when marking a page as free that it was previously marked as occupied (i.e that the bit was set to 1). The entire bootmem bitmap is set to 0xff bit via a memset() during the bootmem initialization. The bootmem_free() call right after the initialization was finding some bits to be set to 0, which didn't make sense since the bitmap has just been memset'ed to 0xff. Except that due to the bug explained above, the bitmap was in fact initialized to 0xff00ff00. Thanks to Marek Vasut for his help and feedback. Signed-off-by:
Romain Perier <romain.perier@free-electrons.com> Acked-by:
Marek Vasut <marex@denx.de> Acked-by:
Ley Foon Tan <lftan@altera.com>
-
- 26 Apr, 2016 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle v4/v6 mixed sockets properly in soreuseport, from Craig Gallak. 2) Bug fixes for the new macsec facility (missing kmalloc NULL checks, missing locking around netdev list traversal, etc.) from Sabrina Dubroca. 3) Fix handling of host routes on ifdown in ipv6, from David Ahern. 4) Fix double-fdput in bpf verifier. From Jann Horn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) bpf: fix double-fdput in replace_map_fd_with_map_ptr() net: ipv6: Delete host routes on an ifdown Revert "ipv6: Revert optional address flusing on ifdown." net/mlx4_en: fix spurious timestamping callbacks net: dummy: remove note about being Y by default cxgbi: fix uninitialized flowi6 ipv6: Revert optional address flusing on ifdown. ipv4/fib: don't warn when primary address is missing if in_dev is dead net/mlx5: Add pci shutdown callback net/mlx5_core: Remove static from local variable net/mlx5e: Use vport MTU rather than physical port MTU net/mlx5e: Fix minimum MTU net/mlx5e: Device's mtu field is u16 and not int net/mlx5_core: Add ConnectX-5 to list of supported devices net/mlx5e: Fix MLX5E_100BASE_T define net/mlx5_core: Fix soft lockup in steering error flow qlcnic: Update version to 5.3.64 net: stmmac: socfpga: Remove re-registration of reset controller macsec: fix netlink attribute validation macsec: add missing macsec prefix in uapi ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here are the latest bug fixes for ARM SoCs, mostly addressing recent regressions. Changes are across several platforms, so I'm listing every change separately here. Regressions since 4.5: - A correction of the psci firmware DT binding, to prevent users from relying on unintended semantics - Actually getting the newly merged clock driver for some OMAP platforms to work - A revert of patches for the Qualcomm BAM, these need to be reworked for 4.7 to avoid breaking boards other than the one they were intended for - A correction for the I2C device nodes on the Socionext Uniphier platform - i.MX SDHCI was broken for non-DT platforms due to a change with the setting of the DMA mask - A revert of a patch that accidentally added a nonexisting clock on the Rensas "Porter" board - A couple of OMAP fixes that are all related to suspend after the power domain changes for dra7 - On Mediatek, revert part of the power domain initialization changes that broke mt8173-evb Fixes for older bugs: - Workaround for an "external abort" in the omap34xx suspend/resume code. - The USB1/eSATA should not be listed as an excon device on am57xx-beagle-x15 (broken since v4.0) - A v4.5 regression in the TI AM33xx and AM43XX DT specifying incorrect DMA request lines for the GPMC - The jiffies calibration on Renesas platforms was incorrect for some modern CPU cores. - A hardware errata woraround for clockdomains on TI DRA7" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems arm64: dts: uniphier: fix I2C nodes of PH1-LD20 ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators" ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask ARM: DRA7: clockdomain: Implement timer workaround for errata i874 ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node" ARM: dts: Add clocks for dm814x ADPLL -
Linus Torvalds authored
This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: -
Jann Horn authored
When bpf(BPF_PROG_LOAD, ...) was invoked with a BPF program whose bytecode references a non-map file descriptor as a map file descriptor, the error handling code called fdput() twice instead of once (in __bpf_map_get() and in replace_map_fd_with_map_ptr()). If the file descriptor table of the current task is shared, this causes f_count to be decremented too much, allowing the struct file to be freed while it is still in use (use-after-free). This can be exploited to gain root privileges by an unprivileged user. This bug was introduced in commit 0246e64d ("bpf: handle pseudo BPF_LD_IMM64 insn"), but is only exploitable since commit 1be7f75d ("bpf: enable non-root eBPF programs") because previously, CAP_SYS_ADMIN was required to reach the vulnerable code. (posted publicly according to request by maintainer) Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad S authored
For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
-
Steve Wise authored
In c4iw_drain_sq/rq(), if the particular queue is already empty then don't block. Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions') Signed-off-by: -
Steve Wise authored
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb3 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: c1340e8a ("iw_cxgb3: support for iWARP port mapping") Signed-off-by:
-
Steve Wise authored
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb4 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: 170003c8 ("iw_cxgb4: remove port mapper related code") Signed-off-by:
-
Sagi Grimberg authored
The drain_rq function expects a normal receive qp to drain. A qp can only have either a normal rq or an srq. If there is an srq, there is no rq to drain. Until the API supports draining SRQs, simply skip draining the rq when the qp has an srq attached. Fixes: 765d6774 ("IB: new common API for draining queues") Signed-off-by:
-
David Ahern authored
It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
This reverts commit 841645b5. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by:
-
Roman Pen authored
The bug in a workqueue leads to a stalled IO request in MQ ctx->rq_list with the following backtrace: [ 601.347452] INFO: task kworker/u129:5:1636 blocked for more than 120 seconds. [ 601.347574] Tainted: G O 4.4.5-1-storage+ #6 [ 601.347651] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 601.348142] kworker/u129:5 D ffff880803077988 0 1636 2 0x00000000 [ 601.348519] Workqueue: ibnbd_server_fileio_wq ibnbd_dev_file_submit_io_worker [ibnbd_server] [ 601.348999] ffff880803077988 ffff88080466b900 ffff8808033f9c80 ffff880803078000 [ 601.349662] ffff880807c95000 7fffffffffffffff ffffffff815b0920 ffff880803077ad0 [ 601.350333] ffff8808030779a0 ffffffff815b01d5 0000000000000000 ffff880803077a38 [ 601.350965] Call Trace: [ 601.351203] [<ffffffff815b0920>] ? bit_wait+0x60/0x60 [ 601.351444] [<ffffffff815b01d5>] schedule+0x35/0x80 [ 601.351709] [<ffffffff815b2dd2>] schedule_timeout+0x192/0x230 [ 601.351958] [<ffffffff812d43f7>] ? blk_flush_plug_list+0xc7/0x220 [ 601.352208] [<ffffffff810bd737>] ? ktime_get+0x37/0xa0 [ 601.352446] [<ffffffff815b0920>] ? bit_wait+0x60/0x60 [ 601.352688] [<ffffffff815af784>] io_schedule_timeout+0xa4/0x110 [ 601.352951] [<ffffffff815b3a4e>] ? _raw_spin_unlock_irqrestore+0xe/0x10 [ 601.353196] [<ffffffff815b093b>] bit_wait_io+0x1b/0x70 [ 601.353440] [<ffffffff815b056d>] __wait_on_bit+0x5d/0x90 [ 601.353689] [<ffffffff81127bd0>] wait_on_page_bit+0xc0/0xd0 [ 601.353958] [<ffffffff81096db0>] ? autoremove_wake_function+0x40/0x40 [ 601.354200] [<ffffffff81127cc4>] __filemap_fdatawait_range+0xe4/0x140 [ 601.354441] [<ffffffff81127d34>] filemap_fdatawait_range+0x14/0x30 [ 601.354688] [<ffffffff81129a9f>] filemap_write_and_wait_range+0x3f/0x70 [ 601.354932] [<ffffffff811ced3b>] blkdev_fsync+0x1b/0x50 [ 601.355193] [<ffffffff811c82d9>] vfs_fsync_range+0x49/0xa0 [ 601.355432] [<ffffffff811cf45a>] blkdev_write_iter+0xca/0x100 [ 601.355679] [<ffffffff81197b1a>] __vfs_write+0xaa/0xe0 [ 601.355925] [<ffffffff81198379>] vfs_write+0xa9/0x1a0 [ 601.356164] [<ffffffff811c59d8>] kernel_write+0x38/0x50 The underlying device is a null_blk, with default parameters: queue_mode = MQ submit_queues = 1 Verification that nullb0 has something inflight: root@pserver8:~# cat /sys/block/nullb0/inflight 0 1 root@pserver8:~# find /sys/block/nullb0/mq/0/cpu* -name rq_list -print -exec cat {} \; ... /sys/block/nullb0/mq/0/cpu2/rq_list CTX pending: ffff8838038e2400 ... During debug it became clear that stalled request is always inserted in the rq_list from the following path: save_stack_trace_tsk + 34 blk_mq_insert_requests + 231 blk_mq_flush_plug_list + 281 blk_flush_plug_list + 199 wait_on_page_bit + 192 __filemap_fdatawait_range + 228 filemap_fdatawait_range + 20 filemap_write_and_wait_range + 63 blkdev_fsync + 27 vfs_fsync_range + 73 blkdev_write_iter + 202 __vfs_write + 170 vfs_write + 169 kernel_write + 56 So blk_flush_plug_list() was called with from_schedule == true. If from_schedule is true, that means that finally blk_mq_insert_requests() offloads execution of __blk_mq_run_hw_queue() and uses kblockd workqueue, i.e. it calls kblockd_schedule_delayed_work_on(). That means, that we race with another CPU, which is about to execute __blk_mq_run_hw_queue() work. Further debugging shows the following traces from different CPUs: CPU#0 CPU#1 ---------------------------------- ------------------------------- reqeust A inserted STORE hctx->ctx_map[0] bit marked kblockd_schedule...() returns 1 <schedule to kblockd workqueue> request B inserted STORE hctx->ctx_map[1] bit marked kblockd_schedule...() returns 0 *** WORK PENDING bit is cleared *** flush_busy_ctxs() is executed, but bit 1, set by CPU#1, is not observed As a result request B pended forever. This behaviour can be explained by speculative LOAD of hctx->ctx_map on CPU#0, which is reordered with clear of PENDING bit and executed _before_ actual STORE of bit 1 on CPU#1. The proper fix is an explicit full barrier <mfence>, which guarantees that clear of PENDING bit is to be executed before all possible speculative LOADS or STORES inside actual work function. Signed-off-by:Roman Pen <roman.penyaev@profitbricks.com> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Michael Wang <yun.wang@profitbricks.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Sudeep Holla authored
Currently ARM CPUs DT bindings allows different enable-method value for PSCI based systems. On ARM 64-bit this property is required and must be "psci" while on ARM 32-bit systems this property is optional and must be "arm,psci" if present. However, "arm,psci" has always been the compatible string for the PSCI node, and was never intended to be the enable-method. So this is a bug in the binding and not a deliberate attempt at specifying 32-bit differently. This is problematic if 32-bit OS is run on 64-bit system which has "psci" as enable-method rather than the expected "arm,psci". So let's unify the value into "psci" and remove support for "arm,psci" before it finds any users. Reported-by:
Soby Mathew <Soby.Mathew@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Eric Dumazet authored
When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Ivan Babrou authored
Signed-off-by:
Ivan Babrou <ivan@cloudflare.com> Signed-off-by:
-
