Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in battery.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.

Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_BATTERY_COMPONENT
definition from the headers and update the documentation accordingly.

While at it, update the pr_fmt() definition and drop the unneeded
PREFIX sybmbol definition from battery.c.  Also adapt the existing
pr_info() calls to the new pr_fmt() definition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Replace the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in ac.c with acpi_handle_debug() and acpi_handle_info() calls,
respectively, which among other things causes the excessive log
level of the messages previously printed via ACPI_EXCEPTION() to
be increased.

Drop the _COMPONENT and ACPI_MODULE_NAME() definitions that are not
used any more, drop the no longer needed ACPI_AC_COMPONENT definition
from the headers and update the documentation accordingly.

While at it, replace the direct printk() invocation with pr_info(),
add a pr_fmt() definition to ac.c and drop the unneeded PREFIX
symbol definition from there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

After dropping all of the code using ACPI_BUS_COMPONENT drop it
too and modify the example in the documentation using it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace all of the ACPI_DEBUG_PRINT() instances in utils.c with
pr_debug() and acpi_handle_debug(), drop the _COMPONENT and
ACPI_MODULE_NAME() definitions that are not used any more and
replace direct printk() invocations with pr_debug() calls (the log
level in there is way excessive).

Also add a special pr_fmt() definition, but this only affects the
pr_debug() messages mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in scan.c with acpi_handle_debug() and acpi_handle_info(), respectively,
and drop the _COMPONENT and ACPI_MODULE_NAME() definitions that
are not used any more.

While at it, drop the redundant "Memory allocation error" message
from acpi_add_single_object() and clean up the list of local variables
in that function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: kernel test robot <lkp@intel.com>

Replace all of the ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() instances
in bus.c with pr_debug() and pr_info(), respectively, drop the
_COMPONENT and ACPI_MODULE_NAME() definitions that are not used any
more and replace direct printk() invocations with the matching
pr_*() calls (with a couple of exceptions where the log level is
decreased).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the remaining ACPI_DEBUG_PRINT() instances in device_pm.c
with dev_dbg() invocations, drop the _COMPONENT and ACPI_MODULE_NAME()
definitions that are not used any more, and drop the no longer needed
ACPI_POWER_COMPONENT definition from the headers and documentation.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace all of the ACPI_DEBUG_PRINT() instances in power.c with
acpi_handle_debug() or pr_debug(), depending on the context,
drop the _COMPONENT and ACPI_MODULE_NAME() definitions that
are not used any more, and replace the direct invocations of
printk() in there with acpi_handle_info() or pr_info(), depending
on the context.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull EFI fix from Borislav Petkov:
 "A single fix from Lukas: handle boolean device properties imported
  from Apple firmware correctly"

* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/apple-properties: Reinstate support for boolean properties

Pull x86 fix from Borislav Petkov:
 "A single fix for objtool to generate proper unwind info for newer
  toolchains which do not generate section symbols anymore. And a
  cleanup ontop.

  This was originally going to go during the next merge window but
  people can already trigger a build error with binutils-2.36 which
  doesn't emit section symbols - something which objtool relies on - so
  let's expedite it"

* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
  x86/entry: Emit a symbol for register restoring thunk

Pull timer fix from Thomas Gleixner:
 "A fix for handling advertised, but non-existent 146818 RTCs correctly.

  With the recent UIP handling changes the time readout of non-existent
  RTCs hangs forever as the read returns always 0xFF which means the UIP
  bit is set.

  Sanity check the RTC before registering by checking the RTC_VALID
  register for correctness"

* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rtc: mc146818: Detect and handle broken RTCs

Pull single stepping fix from Thomas Gleixner:
 "A single fix for the single step reporting regression caused by
  getting the condition wrong when moving SYSCALL_EMU away from TIF
  flags"

[ There's apparently another problem too, fix pending ]

* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Unbreak single step reporting behaviour

Pull powerpc fix from Michael Ellerman:
 "One fix for a bug in our soft interrupt masking, which could lead to
  interrupt replaying recursing, causing spurious interrupts.

  Thanks to Nicholas Piggin"

* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt

Pull i2c fix from Wolfram Sang:
 "Just one I2C driver update this time"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mediatek: Move suspend and resume handling to NOIRQ phase

Pull LED fixes from Pavel Machek:
 "This pull is due to 'leds: trigger: fix potential deadlock with
  libata' -- people find the warn annoying.

  It also contains new driver and two trivial fixes"

* 'for-rc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: rt8515: Add Richtek RT8515 LED driver
  dt-bindings: leds: Add DT binding for Richtek RT8515
  leds: trigger: fix potential deadlock with libata
  leds: leds-ariel: convert comma to semicolon
  leds: leds-lm3533: convert comma to semicolon

Pull NFS client fixes from Trond Myklebust:

 - SUNRPC: Handle 0 length opaque XDR object data properly

 - Fix a layout segment leak in pnfs_layout_process()

 - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn

 - pNFS/NFSv4: Improve rejection of out-of-order layouts

 - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()

* tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Handle 0 length opaque XDR object data properly
  SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
  pNFS/NFSv4: Improve rejection of out-of-order layouts
  pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn
  pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
  pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

This adds a driver for the Richtek RT8515 dual channel
torch/flash white LED driver.

This LED driver is found in some mobile phones from
Samsung such as the GT-S7710 and GT-I8190.

A V4L interface is added.

We do not have a proper datasheet for the RT8515 but
it turns out that RT9387A has a public datasheet and
is essentially the same chip. We designed the driver
in accordance with this datasheet. The day someone
needs to drive a RT9387A this driver can probably
easily be augmented to handle that chip too.

Sakari Ailus, Pavel Machek and Andy Shevchenko helped
significantly in getting this driver right.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: linux-media@vger.kernel.org
Cc: phone-devel@vger.kernel.org
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Add a YAML devicetree binding for the Richtek RT8515
dual channel flash/torch LED driver.

Cc: Sakari Ailus <sakari.ailus@iki.fi>
Cc: newbytee@protonmail.com
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: phone-devel@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

We have the following potential deadlock condition:

 ========================================================
 WARNING: possible irq lock inversion dependency detected
 5.10.0-rc2+ #25 Not tainted
 --------------------------------------------------------
 swapper/3/0 just changed the state of lock:
 ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
 but this lock took another, HARDIRQ-READ-unsafe lock in the past:
  (&trig->leddev_list_lock){.+.?}-{2:2}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&trig->leddev_list_lock);
                                local_irq_disable();
                                lock(&host->lock);
                                lock(&trig->leddev_list_lock);
   <Interrupt>
     lock(&host->lock);

  *** DEADLOCK ***

 no locks held by swapper/3/0.

 the shortest dependencies between 2nd lock and 1st lock:
  -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
     HARDIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     IN-SOFTIRQ-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       kbd_bh+0x9e/0xc0
                       tasklet_action_common.constprop.0+0xe9/0x100
                       tasklet_action+0x22/0x30
                       __do_softirq+0xcc/0x46d
                       run_ksoftirqd+0x3f/0x70
                       smpboot_thread_fn+0x116/0x1f0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     SOFTIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     INITIAL READ USE at:
                           lock_acquire+0x15f/0x420
                           _raw_read_lock+0x42/0x90
                           led_trigger_event+0x2b/0x70
                           rfkill_global_led_trigger_worker+0x94/0xb0
                           process_one_work+0x240/0x560
                           worker_thread+0x58/0x3d0
                           kthread+0x151/0x170
                           ret_from_fork+0x1f/0x30
   }
   ... key      at: [<ffffffff83da4c00>] __key.0+0x0/0x10
   ... acquired at:
    _raw_read_lock+0x42/0x90
    led_trigger_blink_oneshot+0x3b/0x90
    ledtrig_disk_activity+0x3c/0xa0
    ata_qc_complete+0x26/0x450
    ata_do_link_abort+0xa3/0xe0
    ata_port_freeze+0x2e/0x40
    ata_hsm_qc_complete+0x94/0xa0
    ata_sff_hsm_move+0x177/0x7a0
    ata_sff_pio_task+0xc7/0x1b0
    process_one_work+0x240/0x560
    worker_thread+0x58/0x3d0
    kthread+0x151/0x170
    ret_from_fork+0x1f/0x30

 -> (&host->lock){-...}-{2:2} ops: 69 {
    IN-HARDIRQ-W at:
                     lock_acquire+0x15f/0x420
                     _raw_spin_lock_irqsave+0x52/0xa0
                     ata_bmdma_interrupt+0x27/0x200
                     __handle_irq_event_percpu+0xd5/0x2b0
                     handle_irq_event+0x57/0xb0
                     handle_edge_irq+0x8c/0x230
                     asm_call_irq_on_stack+0xf/0x20
                     common_interrupt+0x100/0x1c0
                     asm_common_interrupt+0x1e/0x40
                     native_safe_halt+0xe/0x10
                     arch_cpu_idle+0x15/0x20
                     default_idle_call+0x59/0x1c0
                     do_idle+0x22c/0x2c0
                     cpu_startup_entry+0x20/0x30
                     start_secondary+0x11d/0x150
                     secondary_startup_64_no_verify+0xa6/0xab
    INITIAL USE at:
                    lock_acquire+0x15f/0x420
                    _raw_spin_lock_irqsave+0x52/0xa0
                    ata_dev_init+0x54/0xe0
                    ata_link_init+0x8b/0xd0
                    ata_port_alloc+0x1f1/0x210
                    ata_host_alloc+0xf1/0x130
                    ata_host_alloc_pinfo+0x14/0xb0
                    ata_pci_sff_prepare_host+0x41/0xa0
                    ata_pci_bmdma_prepare_host+0x14/0x30
                    piix_init_one+0x21f/0x600
                    local_pci_probe+0x48/0x80
                    pci_device_probe+0x105/0x1c0
                    really_probe+0x221/0x490
                    driver_probe_device+0xe9/0x160
                    device_driver_attach+0xb2/0xc0
                    __driver_attach+0x91/0x150
                    bus_for_each_dev+0x81/0xc0
                    driver_attach+0x1e/0x20
                    bus_add_driver+0x138/0x1f0
                    driver_register+0x91/0xf0
                    __pci_register_driver+0x73/0x80
                    piix_init+0x1e/0x2e
                    do_one_initcall+0x5f/0x2d0
                    kernel_init_freeable+0x26f/0x2cf
                    kernel_init+0xe/0x113
                    ret_from_fork+0x1f/0x30
  }
  ... key      at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
  ... acquired at:
    __lock_acquire+0x9da/0x2370
    lock_acquire+0x15f/0x420
    _raw_spin_lock_irqsave+0x52/0xa0
    ata_bmdma_interrupt+0x27/0x200
    __handle_irq_event_percpu+0xd5/0x2b0
    handle_irq_event+0x57/0xb0
    handle_edge_irq+0x8c/0x230
    asm_call_irq_on_stack+0xf/0x20
    common_interrupt+0x100/0x1c0
    asm_common_interrupt+0x1e/0x40
    native_safe_halt+0xe/0x10
    arch_cpu_idle+0x15/0x20
    default_idle_call+0x59/0x1c0
    do_idle+0x22c/0x2c0
    cpu_startup_entry+0x20/0x30
    start_secondary+0x11d/0x150
    secondary_startup_64_no_verify+0xa6/0xab

This lockdep splat is reported after:
commit e9181886 ("locking: More accurate annotations for read_lock()")

To clarify:
 - read-locks are recursive only in interrupt context (when
   in_interrupt() returns true)
 - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
   write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
   that holds trig->leddev_list_lock in read-mode
 - when CPU1 (ata_ac_complete()) tries to read-lock
   trig->leddev_list_lock, it would be blocked by the write-lock waiter
   on CPU2 (because we are not in interrupt context, so the read-lock is
   not recursive)
 - at this point if an interrupt happens on CPU0 and
   ata_bmdma_interrupt() is executed it will try to acquire host->lock,
   that is held by CPU1, that is currently blocked by CPU2, so:

   * CPU0 blocked by CPU1
   * CPU1 blocked by CPU2
   * CPU2 blocked by CPU0

     *** DEADLOCK ***

The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):

 CPU 0:                          CPU 1:                        CPU 2:
 -----                           -----                         -----
 led_trigger_event():
   read_lock(&trig->leddev_list_lock);
 				<workqueue>
 				ata_hsm_qc_complete():
 				  spin_lock_irqsave(&host->lock);
 								write_lock(&trig->leddev_list_lock);
 				  ata_port_freeze():
 				    ata_do_link_abort():
 				      ata_qc_complete():
 					ledtrig_disk_activity():
 					  led_trigger_blink_oneshot():
 					    read_lock(&trig->leddev_list_lock);
 					    // ^ not in in_interrupt() context, so could get blocked by CPU 2
 <interrupt>
   ata_bmdma_interrupt():
     spin_lock_irqsave(&host->lock);

Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.

Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.

Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb99 ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>

Pull cifs fixes from Steve French:
 "Four cifs patches found in additional testing of the conversion to the
  new mount API: three small option processing ones, and one fixing domain
  based DFS referrals"

* tag '5.11-rc5-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix dfs domain referrals
  cifs: returning mount parm processing errors correctly
  cifs: fix mounts to subdirectories of target
  cifs: ignore auto and noauto options if given

Pull SCSI fixes from James Bottomley:
 "Two minor fixes in drivers. Both changing strings (one in a comment,
  one in a module help text) with no code impact"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limit
  scsi: target: iscsi: Fix typo in comment

Pull OpenRISC fix from Stafford Horne:
 "Fix config dependencies for Litex SOC driver causing issues on um"

* tag 'for-linus' of git://github.com/openrisc/linux:
  soc: litex: Properly depend on HAS_IOMEM

Pull devicetree fixes from Rob Herring:

 - Cleanups on properties with standard unit suffixes

 - Fix overwriting dma_range_map if there's no 'dma-ranges' property

 - Fix a bug when creating a /chosen node from ARM ATAGs

 - Add missing properties for TI j721e USB binding

 - Several doc reference updates due to DT schema conversions

* tag 'devicetree-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Cleanup standard unit properties
  of/device: Update dma_range_map only when dev has valid dma-ranges
  ARM: zImage: atags_to_fdt: Fix node names on added root nodes
  dt-bindings: usb: j721e: add ranges and dma-coherent props
  dt-bindings:iio:adc: update adc.yaml reference
  dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml references
  dt-bindings: display: mediatek: update mediatek,dpi.yaml reference
  ASoC: audio-graph-card: update audio-graph-card.yaml reference

Pull s390 fixes from Vasily Gorbik:

 - Fix max number of VCPUs reported via ultravisor information sysfs
   interface.

 - Fix memory leaks during vfio-ap resources clean up on KVM pointer
   invalidation notification.

 - Fix potential specification exception by avoiding unnecessary
   interrupts disable after queue reset in vfio-ap.

* tag 's390-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: uv: Fix sysfs max number of VCPUs reporting
  s390/vfio-ap: No need to disable IRQ after queue reset
  s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated

Pull RISC-V fix from Palmer Dabbelt:
 "A fix to avoid initializing max_mapnr to be too large, which may
  manifest on NUMA systems"

* tag 'riscv-for-linus-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fixup pfn_valid error with wrong max_mapnr

Properties with standard unit suffixes already have a type and don't need
type definitions. They also default to a single entry, so 'maxItems: 1'
can be dropped.

adi,ad5758 is an oddball which defined an enum of arrays. While a valid
schema, it is simpler as a whole to only define scalar constraints.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org> # for power-supply
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210128194515.743252-1-robh@kernel.org

Pull arm64 fixes from Catalin Marinas:

 - Fix the virt_addr_valid() returning true for < PAGE_OFFSET addresses.

 - Do not blindly trust the DMA masks from ACPI/IORT.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Do not blindly trust DMA masks from firmware
  arm64: Fix kernel address detection of __is_lm_address()

Pull btrfs fixes from David Sterba:
 "A few more fixes for a late rc:

   - fix lockdep complaint on 32bit arches and also remove an unsafe
     memory use due to device vs filesystem lifetime

   - two fixes for free space tree:

      * race during log replay and cache rebuild, now more likely to
        happen due to changes in this dev cycle

      * possible free space tree corruption with online conversion
        during initial tree population"

* tag 'for-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix log replay failure due to race with space cache rebuild
  btrfs: fix lockdep warning due to seqcount_mutex on 32bit arch
  btrfs: fix possible free space tree corruption with online conversion

Pull block fixes from Jens Axboe:
 "All over the place fixes for this release:

   - blk-cgroup iteration teardown resched fix (Baolin)

   - NVMe pull request from Christoph:
        - add another Write Zeroes quirk (Chaitanya Kulkarni)
        - handle a no path available corner case (Daniel Wagner)
        - use the proper RCU aware list_add helper (Chao Leng)

   - bcache regression fix (Coly)

   - bdev->bd_size_lock IRQ fix. This will be fixed in drivers for 5.12,
     but for now, we'll make it IRQ safe (Damien)

   - null_blk zoned init fix (Damien)

   - add_partition() error handling fix (Dinghao)

   - s390 dasd kobject fix (Jan)

   - nbd fix for freezing queue while adding connections (Josef)

   - tag queueing regression fix (Ming)

   - revert of a patch that inadvertently meant that we regressed write
     performance on raid (Maxim)"

* tag 'block-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  null_blk: cleanup zoned mode initialization
  nvme-core: use list_add_tail_rcu instead of list_add_tail for nvme_init_ns_head
  nvme-multipath: Early exit if no path is available
  nvme-pci: add the DISABLE_WRITE_ZEROES quirk for a SPCC device
  bcache: only check feature sets when sb->version >= BCACHE_SB_VERSION_CDEV_WITH_FEATURES
  block: fix bd_size_lock use
  blk-cgroup: Use cond_resched() when destroy blkgs
  Revert "block: simplify set_init_blocksize" to regain lost performance
  nbd: freeze the queue while we're adding connections
  s390/dasd: Fix inconsistent kobject removal
  block: Fix an error handling in add_partition
  blk-mq: test QUEUE_FLAG_HCTX_ACTIVE for sbitmap_shared in hctx_may_queue

Pull io_uring fixes from Jens Axboe:
 "We got the cancelation story sorted now, so for all intents and
  purposes, this should be it for 5.11 outside of any potential little
  fixes that may come in. This contains:

   - task_work task state fixes (Hao, Pavel)

   - Cancelation fixes (me, Pavel)

   - Fix for an inflight req patch in this release (Pavel)

   - Fix for a lock deadlock issue (Pavel)"

* tag 'io_uring-5.11-2021-01-29' of git://git.kernel.dk/linux-block:
  io_uring: reinforce cancel on flush during exit
  io_uring: fix sqo ownership false positive warning
  io_uring: fix list corruption for splice file_get
  io_uring: fix flush cqring overflow list while TASK_INTERRUPTIBLE
  io_uring: fix wqe->lock/completion_lock deadlock
  io_uring: fix cancellation taking mutex while TASK_UNINTERRUPTIBLE
  io_uring: fix __io_uring_files_cancel() with TASK_UNINTERRUPTIBLE
  io_uring: only call io_cqring_ev_posted() if events were posted
  io_uring: if we see flush on exit, cancel related tasks

The LiteX SOC controller driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.

This causes the driver to be enable under make ARCH=um allyesconfig,
even though it won't build.

By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.

Fixes: 22447a99 ("drivers/soc/litex: add LiteX SoC Controller driver")
Signed-off-by: David Gow <davidgow@google.com>
[shorne@gmail.com: Fix typo in commit message pointed out in review]
Signed-off-by: Stafford Horne <shorne@gmail.com>

Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix to make sure features are detected before they are
   queried.

 - Intel IOMMU address alignment check fix for an IOLTB flushing
   command.

 - Performance fix for Intel IOMMU to make sure the code does not do
   full IOTLB flushes all the time. Those flushes are very expensive
   on emulated IOMMUs.

* tag 'iommu-fixes-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Do not use flush-queue when caching-mode is on
  iommu/vt-d: Correctly check addr alignment in qi_flush_dev_iotlb_pasid()
  iommu/amd: Use IVHD EFR for early initialization of IOMMU features

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the 'kexec jump' code and address a possible
  hibernation image creation issue.

  Specifics:

   - Fix a deadlock caused by attempting to acquire the same mutex twice
     in a row in the "kexec jump" code (Baoquan He)

   - Modify the hibernation image saving code to flush the unwritten
     data to the swap storage later so as to avoid failing to write the
     image signature which is possible in some cases (Laurent Badel)"

* tag 'pm-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: hibernate: flush swap writer after marking
  kernel: kexec: remove the lock operation of system_transition_mutex

Pull ACPI fixes from Rafael Wysocki:
 "These fix the handling of notifications in the ACPI thermal driver and
  address a device enumeration issue leading to the presence of multiple
  'MODALIAS=' entries in one uevent file in sysfs in some cases.

  Specifics:

   - Modify the ACPI thermal driver to avoid evaluating _TMP directly in
     its Notify () handler callback and running too many thermal checks
     for one thermal zone at the same time so as to address a work item
     accumulation issue observed on some systems that fail to shut down
     as a result of it (Rafael Wysocki)

   - Modify the ACPI uevent file creation code to avoid putting multiple
     'MODALIAS=' entries in one uevent file in sysfs which breaks
     systemd-udevd (Kai-Heng Feng)"

* tag 'acpi-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: thermal: Do not call acpi_thermal_check() directly
  ACPI: sysfs: Prefer "compatible" modalias

Pull drm fixes from Dave Airlie:
 "Weekly fixes for graphics, nothing too major, nouveau has a few
  regression fixes for various fallout from header changes previously,
  vc4 has two fixes, two amdgpu, and a smattering of i915 fixes.

  All seems on course for a quieter rc7, fingers crossed.

  nouveau:
   - fix svm init conditions
   - fix nv50 modesetting regression
   - fix cursor plane modifiers
   - fix > 64x64 cursor regression

  vc4:
   - Fix LBM size calculation
   - Fix high resolutions for hvs5

  i915:
   - Fix ICL MG PHY vswing
   - Fix subplatform handling
   - Fix selftest memleak
   - Clear CACHE_MODE prior to clearing residuals
   - Always flush the active worker before returning from the wait
   - Always try to reserve GGTT address 0x0

  amdgpu:
   - Fix a fan control regression on some boards
   - Fix clang warning"

* tag 'drm-fixes-2021-01-29' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors
  drm/nouveau/kms/nv50-: Report max cursor size to userspace
  drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes
  drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices
  drm/nouveau/dispnv50: Restore pushing of all data.
  amdgpu: fix clang build warning
  Revert "drm/amdgpu/swsmu: drop set_fan_speed_percent (v2)"
  drm/i915/gt: Always try to reserve GGTT address 0x0
  drm/i915: Always flush the active worker before returning from the wait
  drm/i915/selftest: Fix potential memory leak
  drm/i915: Check for all subplatform bits
  drm/i915: Fix ICL MG PHY vswing handling
  drm/i915/gt: Clear CACHE_MODE prior to clearing residuals
  drm/vc4: Correct POS1_SCL for hvs5
  drm/vc4: Correct lbm size and calculation
  drm/nouveau/nvif: fix method count when pushing an array

It turns out that the vfs_iocb_iter_{read,write}() functions are
entirely broken, and don't actually use the passed-in file pointer for
IO - only for the preparatory work (permission checking and for the
write_iter function lookup).

That worked fine for overlayfs, which always builds the new iocb with
the same file pointer that it passes in, but in the general case it ends
up doing nonsensical things (and could cause an iterator call that
doesn't even match the passed-in file pointer).

This subtly broke the tty conversion to write_iter in commit
9bb48c82 ("tty: implement write_iter"), because the console
redirection didn't actually end up redirecting anything, since the
passed-in file pointer was basically ignored, and the actual write was
done with the original non-redirected console tty after all.

The main visible effect of this is that the console messages were no
longer logged to /var/log/boot.log during graphical boot.

Fix the issue by simply not using the vfs write "helper" function at
all, and just redirecting the write entirely internally to the tty
layer.  Do the target writability permission checks when actually
registering the target tty with TIOCCONS instead of at write time.

Fixes: 9bb48c82 ("tty: implement write_iter")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>