Linux 4.15 exports the ACPI Low Power Idle Table's
counters in /sys/devices/system/cpu/cpuidle/

low_power_idle_cpu_residency_us

	Show this in the "CPU%LPI" column.

	Today this reflects the "North Complex"
	residency in PC10, so expect it to
	closely follow "Pk%pc10".

low_power_idle_system_residency_us

	Show this in the "SYS%LPI" column.

	Today, this reflects the North is in PC10,
	plus the PCH is sufficiently quiescent
	to save additional power via the "S0ix"
	system state, as measured by the
	PCH SLP_S0 counter.
Signed-off-by: Len Brown <len.brown@intel.com>

rpm-lint flagged these as being executable:

kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/turbostat.8.gz
kernel-tools.x86_64: W: spurious-executable-perm /usr/share/man/man8/x86_energy_perf_policy.8.gz

Fix this
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>

When the user reuests to collect and show columns
that are not present on every row (eg. for every CPU)
turbostat still prints an (empty) line for every CPU.
Update so no blank lines are printed.

old:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12

	Pkg%pc6
	9.12
	9.12

new:
	# turbostat --quiet --show Pkg%pc6
	Pkg%pc6
	9.12
	9.12
	Pkg%pc6
	9.12
	9.12
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Improve readability a little bit by changing this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked: pkg-cstate-limit=7: unlimited, automatic-c-state-conversion=off)

with this output:

 MSR_PKG_CST_CONFIG_CONTROL: 0x00008407 (locked, pkg-cstate-limit=7 (unlimited), automatic-c-state-conversion=off)
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

BDX and SKX have a bit that tells them to PROMOTE shallow
C-states requests to MWAIT(C6).  It is generally a BIOS bug
if this bit is set.  As we have encountered that BIOS bug,
let's print this bit in turbostat debug output.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Some SKX use a 24 MHz crystal, so do not hard code 25 MHz.

Also, SKX crystal is not exact, because SKX uses an EMI reduction
circuit that costs a fraction of a percent.
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

MSR_IA32_MISC_ENABLE[18] is the MWAIT ENABLE bit, not DISABLE bit...

so

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO)

should print as:

MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST MWAIT PREFETCH TURBO)
Signed-off-by: Len Brown <len.brown@intel.com>

The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.

The problem is also easy to reproduce like this:

echo | turbostat

The reason is that we cannot assume that stdin is always a TTY. It can be many
things.

This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.

While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

In turbostat interval mode, a newline typed on standard input
will now conclude the current interval.  Data will immediately
be collected and printed for that interval, and the next interval
will be started.

This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Signed-off-by: Len Brown <len.brown@intel.com>

Interval-mode turbostat now catches and discards SIGUSR1.

Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval.  Turbostat will then start
the next measurement interval using the regular interval length.

This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.

It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Signed-off-by: Len Brown <len.brown@intel.com>

When running in interval-mode, catch interrupts
and print a final data record before exiting.
Signed-off-by: Len Brown <len.brown@intel.com>

Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed.  Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).

While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.

Add the "--enable" option to enable such disabled-by-default
built-in columns:

"--enable Time_Of_Day_Seconds"
"--enable usec"

"--enable all", will enable all disabled-by-defauilt built-in counters.

When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Signed-off-by: Len Brown <len.brown@intel.com>

Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.

This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)

Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

Pull xfs fix from Darrick Wong:
 "Clear out i_mapping error state when we're reinitializing inodes.

  This last minute fix prevents writeback error state from persisting
  past the end of the in-core inode lifecycle and causing EIO errors to
  be reported to userspace when no error has occurred.

  This fix for the behavioral regression has been soaking in for-next
  for a while, but various fs developers persuaded me to try to get it
  upstream for 4.17 because the patch that broke things was introduced
  in 4.17-rc4"

* tag 'xfs-4.17-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: clear writeback errors in inode_init_always

Pull x86 platform driver fix from Andy Shevchenko:
 "Fix NULL pointer dereference in asus-wmi on rfkill cleanup.

  The effective change is just one new condition - two lines of code.
  But it required moving one static helper function, which is why the
  diff looks a bit bigger"

* tag 'platform-drivers-x86-v4.17-4' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: asus-wmi: Fix NULL pointer dereference

Do not perform the rfkill cleanup routine when
(asus->driver->wlan_ctrl_by_user && ashs_present()) is true, since
nothing is registered with the rfkill subsystem in that case. Doing so
leads to the following kernel NULL pointer dereference:

  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  PGD 1a3aa8067
  PUD 1a3b3d067
  PMD 0

  Oops: 0002 [#1] PREEMPT SMP
  Modules linked in: bnep ccm binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core hid_a4tech videodev x86_pkg_temp_thermal intel_powerclamp coretemp ath3k btusb btrtl btintel bluetooth kvm_intel snd_hda_codec_hdmi kvm snd_hda_codec_realtek snd_hda_codec_generic irqbypass crc32c_intel arc4 i915 snd_hda_intel snd_hda_codec ath9k ath9k_common ath9k_hw ath i2c_algo_bit snd_hwdep mac80211 ghash_clmulni_intel snd_hda_core snd_pcm snd_timer cfg80211 ehci_pci xhci_pci drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm xhci_hcd ehci_hcd asus_nb_wmi(-) asus_wmi sparse_keymap r8169 rfkill mxm_wmi serio_raw snd mii mei_me lpc_ich i2c_i801 video soundcore mei i2c_smbus wmi i2c_core mfd_core
  CPU: 3 PID: 3275 Comm: modprobe Not tainted 4.9.34-gentoo #34
  Hardware name: ASUSTeK COMPUTER INC. K56CM/K56CM, BIOS K56CM.206 08/21/2012
  task: ffff8801a639ba00 task.stack: ffffc900014cc000
  RIP: 0010:[<ffffffff816c7348>]  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
  RSP: 0018:ffffc900014cfce0  EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8801a54315b0 RCX: 00000000c0000100
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8801a54315b4
  RBP: ffffc900014cfd30 R08: 0000000000000000 R09: 0000000000000002
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801a54315b4
  R13: ffff8801a639ba00 R14: 00000000ffffffff R15: ffff8801a54315b8
  FS:  00007faa254fb700(0000) GS:ffff8801aef80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000000 CR3: 00000001a3b1b000 CR4: 00000000001406e0
  Stack:
   ffff8801a54315b8 0000000000000000 ffffffff814733ae ffffc900014cfd28
   ffffffff8146a28c ffff8801a54315b0 0000000000000000 ffff8801a54315b0
   ffff8801a66f3820 0000000000000000 ffffc900014cfd48 ffffffff816c73e7
  Call Trace:
   [<ffffffff814733ae>] ? acpi_ut_release_mutex+0x5d/0x61
   [<ffffffff8146a28c>] ? acpi_ns_get_node+0x49/0x52
   [<ffffffff816c73e7>] mutex_lock+0x17/0x30
   [<ffffffffa00a3bb4>] asus_rfkill_hotplug+0x24/0x1a0 [asus_wmi]
   [<ffffffffa00a4421>] asus_wmi_rfkill_exit+0x61/0x150 [asus_wmi]
   [<ffffffffa00a49f1>] asus_wmi_remove+0x61/0xb0 [asus_wmi]
   [<ffffffff814a5128>] platform_drv_remove+0x28/0x40
   [<ffffffff814a2901>] __device_release_driver+0xa1/0x160
   [<ffffffff814a29e3>] device_release_driver+0x23/0x30
   [<ffffffff814a1ffd>] bus_remove_device+0xfd/0x170
   [<ffffffff8149e5a9>] device_del+0x139/0x270
   [<ffffffff814a5028>] platform_device_del+0x28/0x90
   [<ffffffff814a50a2>] platform_device_unregister+0x12/0x30
   [<ffffffffa00a4209>] asus_wmi_unregister_driver+0x19/0x30 [asus_wmi]
   [<ffffffffa00da0ea>] asus_nb_wmi_exit+0x10/0xf26 [asus_nb_wmi]
   [<ffffffff8110c692>] SyS_delete_module+0x192/0x270
   [<ffffffff810022b2>] ? exit_to_usermode_loop+0x92/0xa0
   [<ffffffff816ca560>] entry_SYSCALL_64_fastpath+0x13/0x94
  Code: e8 5e 30 00 00 8b 03 83 f8 01 0f 84 93 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 41 be ff ff ff ff 4c 89 3c 24 48 89 44 24 08 <48> 89 20 4c 89 6c 24 10 eb 1d 4c 89 e7 49 c7 45 08 02 00 00 00
  RIP  [<ffffffff816c7348>] __mutex_lock_slowpath+0x98/0x120
   RSP <ffffc900014cfce0>
  CR2: 0000000000000000
  ---[ end trace 8d484233fa7cb512 ]---
  note: modprobe[3275] exited with preempt_count 2

https://bugzilla.kernel.org/show_bug.cgi?id=196467

Reported-by: red.f0xyz@gmail.com
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits.  Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.

This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file.  This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>

Pull block fix from Jens Axboe:
 "Just a single fix that should make it into this release, fixing a
  regression with T10-DIF on NVMe"

* tag 'for-linus-20180530' of git://git.kernel.dk/linux-block:
  nvme: fix extended data LBA supported setting

Pull SELinux fix from Paul Moore:
 "One more small fix for SELinux: a small string length fix found by
  KASAN.

  I dislike sending patches this late in the release cycle, but this
  patch fixes a legitimate problem, is very small, limited in scope, and
  well understood.

  There are two threads with more information on the problem, the latest
  is linked below:

    https://marc.info/?t=152723737400001&r=1&w=2

  Stephen points out in the thread linked above:

   'Such a setxattr() call can only be performed by a process with
    CAP_MAC_ADMIN that is also allowed mac_admin permission in SELinux
    policy. Consequently, this is never possible on Android (no process
    is allowed mac_admin permission, always enforcing) and is only
    possible in Fedora/RHEL for a few domains (if enforcing)'"

* tag 'selinux-pr-20180530' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: KASAN: slab-out-of-bounds in xattr_getsecurity

Pull crypto fix from Herbert Xu:
 "This fixes a potential kernel panic in the inside-secure driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: inside-secure - do not use memset on MMIO

Pull s390 fixes from Martin Schwidefsky:

 - a missing -msoft-float for the compile of the kexec purgatory

 - a fix for the dasd driver to avoid the double use of a field in the
   'struct request'

[ That latter one is being discussed, and Christoph asked for something
  cleaner, but for now it's a fix ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: use blk_mq_rq_from_pdu for per request data
  s390/purgatory: Fix endless interrupt loop

Pull input fixes from Dmitry Torokhov:
 "We are switching a bunch of Lenovo devices with Synaptics touchpads
  from PS/2 emulation over to native RMI/SMbus.

  Given that all commits are marked for stable there is no point
  delaying them till next release"

[ Also fix a too-small stack array for i2c communication in elan driver ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c_smbus - fix corrupted stack
  Input: synaptics - add Lenovo 80 series ids to SMBus
  Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
  Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
  Input: synaptics - Lenovo Carbon X1 Gen5 (2017) devices should use RMI

Call trace:
 [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428
 [<ffffff9203a8dbf8>] show_stack+0x28/0x38
 [<ffffff920409bfb8>] dump_stack+0xd4/0x124
 [<ffffff9203d187e8>] print_address_description+0x68/0x258
 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0
 [<ffffff9203d1927c>] kasan_report+0x5c/0x70
 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0
 [<ffffff9203d17cdc>] memcpy+0x34/0x68
 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160
 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120
 [<ffffff9203d75d68>] getxattr+0x100/0x2c8
 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0
 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28

If user get root access and calls security.selinux setxattr() with an
embedded NUL on a file and then if some process performs a getxattr()
on that file with a length greater than the actual length of the string,
it would result in a panic.

To fix this, add the actual length of the string to the security context
instead of the length passed by the userspace process.
Signed-off-by: Sachin Grover <sgrover@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>

Pull AFS fixes from David Howells:

 - fix a BUG triggerable from faccessat()

 - fix the mounting of backup volumes

* tag 'afs-fixes-20180529' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix mounting of backup volumes
  afs: Fix directory permissions check

Pull NVMe fix from Christoph:

"Below is a one-liner fix from Max that unbreaks T10-DIF support, which
 got broken in 4.15."

* 'nvme-4.17' of git://git.infradead.org/nvme:
  nvme: fix extended data LBA supported setting

This value depands on the metadata support value, so reorder the
initialization to fit.

Fixes: b5be3b39 ("nvme: always unregister the integrity profile in __nvme_revalidate_disk")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org

Pull tracing fixes from Steven Rostedt:
 "While writing selftests for a new feature, I triggered two existing
  bugs that deal with triggers and instances.

   - a generic trigger bug where the triggers are not removed from a
     linked list properly when deleting an instance.

   - a bug specific to snapshots, where the snapshot is done in the top
     level buffer, when it is supposed to snapshot the buffer associated
     to the instance the snapshot trigger exists in"

* tag 'trace-v4.17-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Make the snapshot trigger work with instances
  tracing: Fix crash when freeing instances with event triggers

The snapshot trigger currently only affects the main ring buffer, even when
it is used by the instances. This can be confusing as the snapshot trigger
is listed in the instance.

 > # cd /sys/kernel/tracing
 > # mkdir instances/foo
 > # echo snapshot > instances/foo/events/syscalls/sys_enter_fchownat/trigger
 > # echo top buffer > trace_marker
 > # echo foo buffer > instances/foo/trace_marker
 > # touch /tmp/bar
 > # chown rostedt /tmp/bar
 > # cat instances/foo/snapshot
 # tracer: nop
 #
 #
 # * Snapshot is freed *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

 > # cat snapshot
 # tracer: nop
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
             bash-1189  [000] ....   111.488323: tracing_mark_write: top buffer

Not only did the snapshot occur in the top level buffer, but the instance
snapshot buffer should have been allocated, and it is still free.

Cc: stable@vger.kernel.org
Fixes: 85f2b082 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux

Pull nds32 fixes from Greentime Hu:
 "Bug fixes and build error fixes for nds32"

* tag 'nds32-for-linus-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
  nds32: Fix compiler warning, Wstringop-overflow, in vdso.c
  nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpage
  nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_page
  nds32: Correct flush_dcache_page function
  nds32: Fix the unaligned access handler
  nds32: Renaming the file for unaligned access
  nds32: To fix a cache inconsistency issue by setting correct cacheability of NTC
  nds32: To refine readability of INT_MASK_INITAIAL_VAL
  nds32: Fix the virtual address may map too much range by tlbop issue.
  nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is default y
  nds32: Fix build failed because arch_trace_hardirqs_off is changed to trace_hardirqs_off.
  nds32: Fix the unknown type u8 issue.
  nds32: Fix the symbols undefined issue by exporting them.
  nds32: Fix xfs_buf built failed by export invalidate_kernel_vmap_range and flush_kernel_vmap_range
  nds32: Fix drivers/gpu/drm/udl/udl_fb.c building error by defining PAGE_SHARED
  nds32: Fix building error of crypto/xor.c by adding xor.h
  nds32: Fix building error when CONFIG_FREEZE is enabled.
  nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.

If a instance has an event trigger enabled when it is freed, it could cause
an access of free memory. Here's the case that crashes:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # echo snapshot > instances/foo/events/initcall/initcall_start/trigger
 # rmdir instances/foo

Would produce:

 general protection fault: 0000 [#1] PREEMPT SMP PTI
 Modules linked in: tun bridge ...
 CPU: 5 PID: 6203 Comm: rmdir Tainted: G        W         4.17.0-rc4-test+ #933
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 RIP: 0010:clear_event_triggers+0x3b/0x70
 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0
 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016
 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0
 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c
 FS:  00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0
 Call Trace:
  event_trace_del_tracer+0x2a/0xc5
  instance_rmdir+0x15c/0x200
  tracefs_syscall_rmdir+0x52/0x90
  vfs_rmdir+0xdb/0x160
  do_rmdir+0x16d/0x1c0
  __x64_sys_rmdir+0x17/0x20
  do_syscall_64+0x55/0x1a0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

This was due to the call the clears out the triggers when an instance is
being deleted not removing the trigger from the link list.

Cc: stable@vger.kernel.org
Fixes: 85f2b082 ("tracing: Add basic event trigger framework")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild fixes from Masahiro Yamada:

 - enable '-fno-tree-loop-im' only when supported

 - add '-fno-PIE' option before the asm-goto test

* tag 'kbuild-fixes-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Makefile: disable PIE before testing asm goto
  kbuild: gcov: enable -fno-tree-loop-im if supported

Pull ARM SoC fixes from Olof Johansson:
 "A few more fixes for v4.17:

   - a fix for a crash in scm_call_atomic on qcom platforms

   - display fix for Allwinner A10

   - a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)

   - a fix for eMMC corruption on hikey

   - i2c-gpio descriptor tables for ixp4xx

  ... plus a small typo fix"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Fix i2c-gpio GPIO descriptor tables
  arm64: dts: hikey: Fix eMMC corruption regression
  firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
  ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
  ARM: dts: sun4i: Fix incorrect clocks for displays
  ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One

Pull x86 store buffer fixes from Thomas Gleixner:
 "Two fixes for the SSBD mitigation code:

   - expose SSBD properly to guests. This got broken when the CPU
     feature flags got reshuffled.

   - simplify the CPU detection logic to avoid duplicate entries in the
     tables"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation: Simplify the CPU bug detection logic
  KVM/VMX: Expose SSBD properly to guests

Pull scheduler fixes from Thomas Gleixner:
 "Three fixes for scheduler and kthread code:

   - allow calling kthread_park() on an already parked thread

   - restore the sched_pi_setprio() tracepoint behaviour

   - clarify the unclear string for the scheduling domain debug output"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched, tracing: Fix trace_sched_pi_setprio() for deboosting
  kthread: Allow kthread_park() on a parked kthread
  sched/topology: Clarify root domain(s) debug string

ARM64: hisi fixes for 4.17

- Remove eMMC max-frequency property to fix eMMC corruption on hikey board

* tag 'hisi-fixes-for-4.17v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hikey: Fix eMMC corruption regression
Signed-off-by: Olof Johansson <olof@lixom.net>

I used bad names in my clumsiness when rewriting many board
files to use GPIO descriptors instead of platform data. A few
had the platform_device ID set to -1 which would indeed give
the device name "i2c-gpio".

But several had it set to >=0 which gives the names
"i2c-gpio.0", "i2c-gpio.1" ...

Fix the offending instances in the ARM tree. Sorry for the
mess.

Fixes: b2e63555 ("i2c: gpio: Convert to use descriptors")
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Reported-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull KVM fixes from Radim Krčmář:
 "PPC:

   - Close a hole which could possibly lead to the host timebase getting
     out of sync.

   - Three fixes relating to PTEs and TLB entries for radix guests.

   - Fix a bug which could lead to an interrupt never getting delivered
     to the guest, if it is pending for a guest vCPU when the vCPU gets
     offlined.

  s390:

   - Fix false negatives in VSIE validity check (Cc stable)

  x86:

   - Fix time drift of VMX preemption timer when a guest uses LAPIC
     timer in periodic mode (Cc stable)

   - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow
     migration from hosts that don't need retpoline mitigation (Cc
     stable)

   - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and
     CPUID.OSXSAVE (Cc stable)

   - Report correct RIP after Hyper-V hypercall #UD (introduced in
     -rc6)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix #UD address of failed Hyper-V hypercalls
  kvm: x86: IA32_ARCH_CAPABILITIES is always supported
  KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
  x86/kvm: fix LAPIC timer drift when guest uses periodic mode
  KVM: s390: vsie: fix < 8k check for the itdba
  KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path
  KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change
  KVM: PPC: Book3S HV: Make radix clear pte when unmapping
  KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page
  KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry